【Review 】JBC C210 Compatible Solder Tips - Relife vs Xsoldering vs Nameless [Part 1]

  Рет қаралды 42,488

iPhone Service Malaysia

iPhone Service Malaysia

Күн бұрын

Пікірлер: 91
@mudassariqbal6880
@mudassariqbal6880 4 жыл бұрын
Simply the best review i have ever seen yet.... i am impressed..... waiting for the next video..... love, respect and support from Pakistan!!
@hafizsulaiman5368
@hafizsulaiman5368 Жыл бұрын
I use a brass wool for my soldering station, and there’s almost no performance difference from day one, and I use the same tip for over 3 years now and I do soldering almost daily, still works well, even the solder tip still looks good. So just use brass wool, instead of wet sponge or tissue
@nilomyki
@nilomyki 4 жыл бұрын
Waiting patiently for the DIY JBC Soldering Station Video. Good evaluation of the clone JBC Tips by the way.
@saedmhanna1198
@saedmhanna1198 3 жыл бұрын
it's just on the time before buy anything thanks again
@mosparkmore6340
@mosparkmore6340 2 жыл бұрын
Omg you don’t realise that tip under microscope shows the quality which does matter when it comes to cleaning pads and all that thanks u sir
@LBCAndrew
@LBCAndrew 3 жыл бұрын
The best cheap JBC 245 compatible soldering station would definitely be the AIXUN T3A. I just picked one up yesterday for $105 + shipping and it comes with 3 tips, has 200w max output and a very nice color display. It heats c245 JBC tips to 380'c in only 4 seconds.
@euphoricmonk
@euphoricmonk 2 жыл бұрын
I agree. Where did you get it for $105?
@B.E.H.
@B.E.H. Жыл бұрын
@@euphoricmonk did you find ???
@iPhoneMiddleEast
@iPhoneMiddleEast 3 жыл бұрын
Yep it's true, using Sugon and Xsoldering tips. not bad to be honest but the issue is the tip is not well calibrated same as the original JBC. Thanks for the video master save my time and my money !
@RaynerDaCruz
@RaynerDaCruz 3 жыл бұрын
Any update on the DIY JBC Soldering Station video?
@SURGE101
@SURGE101 4 жыл бұрын
I’m first! 😂 love your videos, you’re a master!
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 4 жыл бұрын
lol 😄
@henrikloiske8572
@henrikloiske8572 3 жыл бұрын
Excellent review 👌👌 Hello from Sweden 🇸🇪🇸🇪🇸🇪🇸🇪
@Zemine77
@Zemine77 4 жыл бұрын
hello, nice another video, thank you for sharing 👍 looking forward for the cheapest station that suport jbc kartidges
@kml1699
@kml1699 4 жыл бұрын
First my soldering iron hako FX 951 set I was not happy because it keep breaking pads of mother board so I bought JBC NACE 1 $1400 I am very satisfied since I never broke any single pad of mother board but tips are very expensive
@mimovil4788
@mimovil4788 3 жыл бұрын
永远的真理,一分钱一分货。
@SURGE101
@SURGE101 4 жыл бұрын
Can’t wait for your next video on the cheapest JBC STATION. jay
@mukeshthakur3778
@mukeshthakur3778 3 жыл бұрын
Thanks from sharing ♥️👌
@paulcohen1555
@paulcohen1555 Жыл бұрын
Please show a cross section of the JBC tip. Which temperature sensor they are using?
@Sajid-lp9ss
@Sajid-lp9ss 5 ай бұрын
can you compare the original JBC tips with Mechanic tips?
@rifatahmed4659
@rifatahmed4659 4 жыл бұрын
Awesome. Waiting to see the custom made cheap jbc station review
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 4 жыл бұрын
Coming soon, I need to finish up 1 more diagnosis video to help beginner have a clear mind how is the learning process.
@rifatahmed4659
@rifatahmed4659 4 жыл бұрын
@@iPhoneServiceMalaysia really great. 🤗🤗😍. Youre the best in youtube ... Love u sir for what youre doing for us. 😘
@mnzzul5472
@mnzzul5472 Жыл бұрын
Hi bang.. nk tanya solder tip jbc boleh sarung ke sugon ke? Atau solder tip ni wajib ikut code model?
@AIexanderHartdegen
@AIexanderHartdegen 3 жыл бұрын
Hi sir, thanks a lot fo the video. Can I ask you with what kind of camera are you recording those tips at 0:47 ? thanks a lot
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
It’s iPhone XS 😂
@AIexanderHartdegen
@AIexanderHartdegen 3 жыл бұрын
@@iPhoneServiceMalaysia that's impressive, video quality is very nice. Thanks
@arcilonjr
@arcilonjr 3 жыл бұрын
hello we’re the video of the custom jbc review and link in aliexpress to buy ?
@jackazz02
@jackazz02 3 жыл бұрын
i love jbc but my problem is the tip hard to find original tip in asia can u share wer to buy original tip on asia or do u have store like lazada or shoppe etc
@호수-q3v
@호수-q3v 4 жыл бұрын
Thank you. I'm watching your video. May I ask you a question? Repairing iPhone xs max If I connect at least one of the three camera modules, the touch response will be delayed. Which part should I check?
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 4 жыл бұрын
Hi. Perhaps my next video will give you some aspect of where to begin. Related to reading diagram
@ladbla1752
@ladbla1752 4 жыл бұрын
Thanks for great review. Can you please post website addresses of those tips JBC compatible?
@flucnec9977
@flucnec9977 3 жыл бұрын
Nice vidéo ! What do you think of the xsoldering station ? I have a ~250 budget for a microsoldering one
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
I haven't try xsoldering station. Normally I look at the company how long they started this kind of business first. That's why I didnt get Xsoldering
@flucnec9977
@flucnec9977 3 жыл бұрын
Yeah it's brand new for the moment
@arcilonjr
@arcilonjr 3 жыл бұрын
we’re is the soldering station review and link to buy my friend
@B.E.H.
@B.E.H. Жыл бұрын
Friend, link of Xsoldering tips, please?!
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia Жыл бұрын
I don’t have sell and nor have commission. Try search it in google
@rafaelmagro2921
@rafaelmagro2921 Жыл бұрын
I don't know if someone already asked you, but what's the difference between the c115 and the c210 tips?
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia Жыл бұрын
The size. I don’t recommend c115, it’s too small and more expensive. But it’s good for broken flex repair.
@jairosantos
@jairosantos 3 жыл бұрын
Aliexpress Shenzhen Handif Industrial Co., Ltd. Você faz originais ou cópias? A ponta JBC c210 usa um termopar ou termistor (PTC) como sensores ?. Obrigado.
@raygunz108
@raygunz108 4 жыл бұрын
wow thanks for new video love it
@gergelysoki1705
@gergelysoki1705 3 жыл бұрын
Can someone provide me an aliexpress link where i can buy those good xsoldering tips? Thank you
@dallas7796
@dallas7796 4 жыл бұрын
Hi Lim, awesome video as usual :) I recently bought a JBC DDE with 2 stands (one for T245 and T210 handle), could you recommend the 3 best tips in your opinion for both handles. I repair most iPhone/Macbooks. Thanks in advance.
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 4 жыл бұрын
Knife type of tips must needed. But depends on your budget... myself is use original JBC tips. Those students are use compatible to saving my cost.
@dallas7796
@dallas7796 4 жыл бұрын
@@iPhoneServiceMalaysia Thanks for your respond Lim :) I'm going for original tips as well, in my opinion, there is far better, I had a JBC clone station before...
@bdbdbbbbs5909
@bdbdbbbbs5909 4 жыл бұрын
Gret thanks We want more vedios for analysis 4 how to fix with power supply current pleaaase
@lutforrahman8197
@lutforrahman8197 Жыл бұрын
good information tnx
@frankerebus
@frankerebus 10 ай бұрын
review aixun pins pls
@wanamirhazwan5685
@wanamirhazwan5685 Жыл бұрын
Oss team ok or no sirr
@manyau47
@manyau47 3 жыл бұрын
And the sugo t25?
@FATEHVSSOFIANE
@FATEHVSSOFIANE 3 жыл бұрын
respect from algeria
@MieszkaniecLublina
@MieszkaniecLublina Жыл бұрын
Is there any difference between the T210 and the c210 ?
@johnhammond7579
@johnhammond7579 Жыл бұрын
T210 refers to the handle. C210 refers to the cartridges (tips) for the handle.
@MieszkaniecLublina
@MieszkaniecLublina Жыл бұрын
@@johnhammond7579 OK, thanks. Now it's all clear
@be2139
@be2139 3 жыл бұрын
Great video
@gajahmadawahono7598
@gajahmadawahono7598 Жыл бұрын
Hai kakitu JBC BERAPA HARGA NYIMAK BUNG..????👍
@allaoui38
@allaoui38 4 жыл бұрын
thank's , but you dont's explain if we can use these tips with jbc station .
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 4 жыл бұрын
Ya. Can use
@onivtv1479
@onivtv1479 2 жыл бұрын
Please give a link were can buy jbc,
@ars1crea
@ars1crea 3 жыл бұрын
Im thinking about to buy a JBC compack station but I dont know if take CD-S or CD-B. Does the 140W (CD-B) works to do micro soldering like CD-S? I only can afford one of these. Maybe I could buy CD-S then buy a cheap JBC soldering iron to make the laptop works. But how about when I need to do reballing on a PS4 CPU?? I'm undecided
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
abt performance between S and B. They are suffice for console repairing. Because sometime I repaired some graphic card, it still can handle.
@ars1crea
@ars1crea 3 жыл бұрын
@@iPhoneServiceMalaysia I wonder If I could do same work with phone repair using "B" model. Like most microscope works because If I could, may I take B model.
@LeoL123
@LeoL123 2 жыл бұрын
@@ars1crea they are exactly the same station. The only difference is its handle. The S one come with t210 and B come with T245. However you could use T245 on the S and vice versa since they're the same station.
@Grucha1998
@Grucha1998 3 жыл бұрын
Great channel 😍
@khajask8113
@khajask8113 4 жыл бұрын
What is the best micro solder....
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
Today is 28 December 2020. My answer is still JBC.
@boardrepair4163
@boardrepair4163 4 жыл бұрын
Love you bro 😍
@saulsandre6322
@saulsandre6322 3 жыл бұрын
Good video
@tymflasher
@tymflasher 4 жыл бұрын
nice video..👍
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
Thank you, will do more
@bobby9568
@bobby9568 3 жыл бұрын
we want more video's!
@forastero233
@forastero233 22 күн бұрын
Aixun ???
@omargassama4530
@omargassama4530 4 жыл бұрын
How does someone contact you?
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
Web site have all the contacts
@hantusangap
@hantusangap 3 жыл бұрын
i just finished my diy soldering station after watching this videos few month ago.even it's just diy but its feel better than my hakko t-12.im using original handle and tip.just have one tip now due to fucking expensive price 😪
@freeuser8748
@freeuser8748 3 жыл бұрын
which hakko model? There is no comparison between hakko and what you were talking abt.
@hantusangap
@hantusangap 3 жыл бұрын
@@freeuser8748 fx951
@paulcohen1555
@paulcohen1555 Жыл бұрын
But Relife have a NICE package!
@Evgeniy_Prudnikov
@Evgeniy_Prudnikov 4 жыл бұрын
Hi Liam. Please enable translation :-)
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 4 жыл бұрын
Done
@Evgeniy_Prudnikov
@Evgeniy_Prudnikov 4 жыл бұрын
@@iPhoneServiceMalaysia Thanks, Liam :-)
@khadimamar8914
@khadimamar8914 2 жыл бұрын
Salut monsieur je voulais une formation svp
@duditaudit8247
@duditaudit8247 3 жыл бұрын
Don’t ever buy those replica tips for your jbc station. Buy only jbc original tip. Trust me
@lajawab9140
@lajawab9140 3 жыл бұрын
Bro the jbc tip i got from here for sugon is much better than your real jbc tip even its more small than this and have better shape than your original jbc tip
@lord_haven1114
@lord_haven1114 Жыл бұрын
Buy only real Jbc tips. It’s worth the extra money every single time.
@M.E63
@M.E63 3 жыл бұрын
I’ve got the xsoldering station pro which works really really well with original tips and the advantage is colour screen and 2 handles c245 handle and c210 handle , and the price was really good £139 with no tips , I bought 3 xsoldering c210 tips and they are poor quality , the temperature is not stable as it will never stay on the set temperature and will keep going up and down every second and the sensor in the tip is bad quality bcuz if I set it to 350 and check the real temp and it’s actually around 385 so it’s not accurate at all, with original jbc tips the temperature is near enough spot on , just a 1-2 degrees off which is normal , another problem is china only manufacture 3 different c210 tips , one knife tip which is ok and a fine straight tip and a curved fine tip but quality is poor as the straight tip got bent just by cleaning it , I presume all of the china ones are poor quality for the c210 but I’m waiting for my c245 china tips to be delivered which hopefully should be better,and best to buy genuine jbc, another thing about the xsoldering pro, it’s not esd safe but inside the station there is extra pins and the wiring in the iron has a spare wire going to the tip, I modified it to make it esd safe but now the station doesn’t go into sleep mode so need to find a work around for that
@iPhoneServiceMalaysia
@iPhoneServiceMalaysia 3 жыл бұрын
Yes. The fake tips temp is not accurate as original. I already made the video and gonna upload today. Thanks for sharing.
@icfixcenter8255
@icfixcenter8255 4 жыл бұрын
Xsoldering bad 👎
@flucnec9977
@flucnec9977 3 жыл бұрын
Why ?
Best hobby soldering iron? Pinecil vs. Miniware, Hakko, Weller and Ersa
24:57
Made with Layers (Thomas Sanladerer)
Рет қаралды 778 М.
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 17 МЛН
路飞做的坏事被拆穿了 #路飞#海贼王
00:41
路飞与唐舞桐
Рет қаралды 15 МЛН
One day.. 🙌
00:33
Celine Dept
Рет қаралды 67 МЛН
Запускаем жала JBC без станции
10:50
【Review 】JBC Fake tips vs Original Temperature Check [Part 2]
7:30
iPhone Service Malaysia
Рет қаралды 10 М.
Hot air station shootout: Atten ST-862D vs. Quick 861DW
41:20
Louis Rossmann
Рет қаралды 208 М.
iPhone 15 Pro Storage Expansion | 128GB To 1TB
16:46
KingSener
Рет қаралды 5 МЛН
Upgrading a Soldered Laptop GPU
17:16
TechModLab
Рет қаралды 1,1 МЛН
SDG #345 KSGER PD210 USB-C JBC Style C210 Soldering Iron PD3.0
18:46
SDG Electronics
Рет қаралды 9 М.
Is the Aixun T3A a good T245 soldering station?
35:12
Tony359 | Tony's Tinkering Shop
Рет қаралды 29 М.
Is A Genuine JBC Station Better Than A Clone? | Voltlog 401
16:10
I thought one thing and the truth is something else 😂
00:34
عائلة ابو رعد Abo Raad family
Рет қаралды 17 МЛН