NEW Klein 11-1 RATCHETING Impact Screwdriver 32500HDRT - 1st Ratcheting 11-1?

  Рет қаралды 21,910

MORGAN'S Maintenance

MORGAN'S Maintenance

Күн бұрын

Just picked up the New Klein 11-1 Impact Rated Ratcheting Screwdriver 32500HDRT. I have had other Ratcheting Screwdrivers from Klein, but this one may be different. I share in this video the differences ad similarities to the original 11-1 to help you make a decision if one, both, or neither of them are a good fit for you.
Hope it is useful & THANKS FOR WATCHING!
The following are links to products shown in the video. Links marked (Affiliate Link) are Amazon Affiliate Links for Items in the video. I participate in the Amazon Associates Program and make a small commission if you purchase using this link at no cost to you. Thank you for your Support!
If you would like a link for something else you see in the video... let me know and I will post it here as well.
Klein Impact 11-1 Ratcheting Impact Rated (Lowes Non- Affiliate Link) - www.lowes.com/pd/Klein-Tools-...
Klein Impact 11-1 Non Ratcheting (Affiliate Link) - amzn.to/46SmF7R
Short 1/4" and 5/16 Malco (Affiliate Link) - amzn.to/3tDCOiw
Time Stamps:
00:00 Intro - Why I Bought
02:53 11-1 and 11-1 Ratcheting Cost & Feature Comparison
06:39 The Ratcheting Function and Why I like it Compared to Others
09:55 Final Thoughts & Outro
#electrical #hvac #plumbing #diy #construction #maintenance #toolreview #kleintools #screwdriver #ratcheting #lowes #newtools

Пікірлер: 154
@paulmarsdensr1095
@paulmarsdensr1095 Ай бұрын
I just bought the 11&1 @Home depot Saturday. & $21 bucks. I went to Lowes right after and checked out the tough built tool boxes and the Klein Mod box tool boxes. That Klein orange is so awesome. I'm sold. Klein and knipex are my go to tools. A great video brother. Have a great weekend. 😊
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
Two of my favorite brands also 👍👍 Appreciate it
@AndrewBehm
@AndrewBehm Ай бұрын
I love my Modbox, it’s such a versatile system, and the larger wheels make rolling them, even down stairs, easy!
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
@@AndrewBehm I just got a few of them to try out. They do seem pretty noce
@josephikrakowski2371
@josephikrakowski2371 15 күн бұрын
Bought the 11 in 1 rcht and I absolutely love it. I swapped out the whole 5/16” side for a Malco stubby 1/4” 5/16” flip bit for HVAC use. I kept the 3/8” bit but replaced the bit holder with my old HVAC 8in1 bit holder (PH2, Slotted, thermostat driver and schrader) It is now an essential part of my EDC.
@MORGANSMaintenance
@MORGANSMaintenance 15 күн бұрын
These Impact 11-1 are the best in my opinion because you can customize them for certain jobs. 👍👍
@Stefan_Kawalec
@Stefan_Kawalec 7 ай бұрын
I like that gentle chuckle in your voice at the very beginning. Even you find that number of screwdriver hilarious.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I know… they just keep coming out with them. 😂 I wouldn’t have bought it if I wasn’t wanting to get another one if this type to make flip screwdrivers for specific things. I thought why not get it and share it. I did buy the last one knowing I was giving it away. 😂
@Stefan_Kawalec
@Stefan_Kawalec 7 ай бұрын
@@MORGANSMaintenance Jokes aside, the video is very good - after watching it I know everything about the tool I will never buy :) I just realised the only exchangeable screwdriver I have is Wera and I don't have any ratcheting ones. That shows my need for screwdrivers. But I have 3 cordless impact drivers, 3 cordless light-duty drill-drivers, 1 cordless heavy-duty hammering drill-driver, 1 cordless heavy-duty drill, 1 corded light-duty drill-drivers, 2 corded heavy-duty drills (non-stationary ones). And two full SYS1 Sortainers with bits in every possible length and variation. Not to mention two backup boxes with the same assortment I keep in home.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@Stefan_Kawalec we all have the same problem… just with different style of the drug 😂
@Stefan_Kawalec
@Stefan_Kawalec 7 ай бұрын
@@MORGANSMaintenance 5 angle grinders, 3 SDS+ hammer-drills, uncountable amount of accessories for power tools I've used only once etc. Recently I needed to fix my own bed - these planks underneath the mattress got loose. I was trying to use screws to fix them and when looking for some clamps, I've found my Makita heavy-duty pneumatic stapler. I forgot I had it and it saved me a ton of time.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@Stefan_Kawalec I rarely get rid of tools myself… there is always the one job that will come up that I will kick myself for getting rid of it
@user-un6hn9bi8w
@user-un6hn9bi8w 7 ай бұрын
I just purchased the klein 11-1 impact ratcheting screwdriver couple days ago and I love it. That was my first Klein ratcheting screwdriver I purchased.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
The impact 11-1 has been one of the better Klein Screwdrivers they have come out with… if you like ratcheting screwdrivers it is a good option 👍👍
@Wattshappening
@Wattshappening 7 ай бұрын
I Love it! The 12 point feature works great with Kleins new pass thru socket sets.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I have seen that. May end up picking those up… I’m still undecided on it at the moment. Thanks for the info 👍
@OnusBones
@OnusBones 28 күн бұрын
Fwiw, both versions of the 11-in-1 were available in my usual Home Depot (Knoxville, TN) this weekend, 05/25/2024.
@MORGANSMaintenance
@MORGANSMaintenance 27 күн бұрын
👍👍
@milesmeow
@milesmeow Ай бұрын
This is a really good review. You pointed out lots of good features and the design differences. I really appreciate it.
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
You are welcome. Thanks for watching and taking the time to comment 👍
@georgepatterson2737
@georgepatterson2737 Ай бұрын
i agree with you on the placement of the controls on most ratcheting screwdrivers. I want to love them but they always cause me more headache than benefit. I wanna try this one but i got so many that I hate I'm scared to buy another one.
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
I bought and use it, but I use it more in the locked position than ratcheting. The only real advantage to this one is if you buy the newer KNect sets that work with it. They only fit in the ratcheting version
@bgul4000
@bgul4000 7 ай бұрын
I just got the Proto tools 11 in 1. Very nice finish. It has the smallest handle of any multi driver that I have felt. And made in the USA!
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I will have to look into that one 👍
@nachoisme
@nachoisme 7 ай бұрын
Klein seems to be getting closer to a lot of their tools to have interchangeable ‘bits’. I like the flexibility of them. I saw this one on their website and thought the ratcheting was a typo as I was buying the other ratcheting new one with the orange bits. Wish I would have looked harder because the one you showed would be perfect for me. I usually keep the ratcheting locked but I find it a great feature when space is limited
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I’ve been the same on most ratcheting screwdrivers because I don’t like having to use my other hand to change it… so I just leave it in the fixed position. That and it’s hard to teach an old dog new tricks 😂 I’ve been a manual screwdriver person most my life.
@RileyKnifeandTool
@RileyKnifeandTool 7 ай бұрын
Well, I guess I haven't bought a new Klein screwdriver in a couple of weeks. Here we go again! haha. I'm glad it fits my current sheath design too. Nice of Klein Tools to consider that. ;)
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
You know you’ve made it when they start building screwdrivers around your sheaths and not the other way around 😂😂
@robertwinston2496
@robertwinston2496 Ай бұрын
Where can one buy such a sheath? Would love to have one for my Klein!
@aaronsapp3407
@aaronsapp3407 7 ай бұрын
I keep seeing videos about Klein shifting over to Lowe’s and being a big deal. Our Lowe’s had one sad end cap with two offerings and that was it for Klein there.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Mine has a lot of hand tools, but the section is pretty small. They don’t have much of the bags/mod box/etc. My Home Depot didn’t carry much in store either, now they have almost nothing
@justinpena1096
@justinpena1096 7 ай бұрын
I picked this up at Home Depot the other day as Lowes did not have it.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I just saw that Home Depot had it yesterday. My Lowe’s hasn’t had it in stores yet, only online
@JonathanLD312
@JonathanLD312 7 ай бұрын
Thanks for trying the old school 11 in 1 shaft! Interesting that it doesn't fit though. I've discovered at least one reason for the 12 point design. I'll make a video about it soon so keep your eyes peeled 😉 Also I love the fact that your 111st tool review is on an 11 in 1. You timed it perfectly!
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
That’s pretty cool, I didn’t even notice that. I think it’s the ball bearing on the OG shaft, without it it would probably go. Appreciate you again for letting me know 👍
@xthee_0nly_1x11
@xthee_0nly_1x11 4 ай бұрын
My original one fits. Was the first thing I did. Weird that his doesn’t.
@Rungziggy
@Rungziggy 2 ай бұрын
I just picked one up today and mine has a ball bearing on the shaft, still has the 12pt on the handle
@JonathanLD312
@JonathanLD312 2 ай бұрын
@@Rungziggy you got a ratcheting version too?
@Rungziggy
@Rungziggy 2 ай бұрын
@@JonathanLD312 yes 11-1 ratcheting 32500HDRT. Just picked up yesterday from HD
@chrisfyfe9212
@chrisfyfe9212 7 ай бұрын
Good Spot ; hope it shows up here in Kanuckastan soon !
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
👍👍
@chrisfyfe9212
@chrisfyfe9212 7 ай бұрын
@@MORGANSMaintenance I checked my Local Home Depot , they had never heard of it , hopefully I stirred up some interest !
@EASTDURHAMSL
@EASTDURHAMSL 4 ай бұрын
32501Hd comes in set mod case with bits now 47 pieces i believe they did this because people say dont put in impact and they included an impact shaft separate
@MORGANSMaintenance
@MORGANSMaintenance 4 ай бұрын
👍👍
@three-phase562
@three-phase562 7 ай бұрын
Looks like the handle has a wire clip inside that locks onto the grooves in the centre of the 1/2" hexagon drive to keep it in position. I usually end up using my other hand to change the ratchet direction on the handle so the ratchet position doesn't affect me the same.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
It’s a friction fit for sure. Maybe Klein is moving more in that direction instead of the ball bearings. That’s probably the more effective way to use a ratcheting screwdriver… my muscle memory just won’t let me do it 😂
@geofffryer1187
@geofffryer1187 7 ай бұрын
I hope the malco bit can fit inside that new ratcheting 11-in-1 rachet driver!
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
It does… all the same stuff I have used in my regular one works in the ratcheting one
@kellypainter7625
@kellypainter7625 Ай бұрын
I just got one of the ratcheting 11 in 1 and it has ball bearing retention. They must have reverted to the older design.
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
You are the second person to tell me that. I believe it’s because some people were having issues with the shaft coming out a little too easy. If you kinda shook your screwdriver they would sometimes pop out. I don’t know if they added the ball bearing to help with that… but maybe 🤷‍♂️
@joerodriguez8546
@joerodriguez8546 2 ай бұрын
Awesome video. I have both impact screwdrivers. Where can I get that nice holder or holster for the screwdriver that you said you saw in Johnathan video? I’m sorry o don’t know who Johnathan is, either. Great work. Thanks 🙏🏼
@MORGANSMaintenance
@MORGANSMaintenance 2 ай бұрын
It’s been awhile since I made this video but I believe it was a Riley Knife and Tool Sheath Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein kzbin.info/www/bejne/gYmqoXt5a9iksKs There is a link in the description of that video, but I believe it’s www.rileyknifeandtool.com
@tictac-nscale
@tictac-nscale 5 ай бұрын
Thanks for the great video on the new Klien 11-1 impact-rated Ratcheting screwdriver, I have one on order arriving tomorrow. In your Klien non-ratcheting screwdriver video you showed a magnetizer but there wasn't a link to it can you post that link for me thanks?
@MORGANSMaintenance
@MORGANSMaintenance 5 ай бұрын
It was this one here amzn.to/47MBZCk I use this one most of the time and it holds bits amzn.to/48URQQq
@tictac-nscale
@tictac-nscale 5 ай бұрын
@@MORGANSMaintenance Thank you very much for the link.
@MORGANSMaintenance
@MORGANSMaintenance 5 ай бұрын
@@tictac-nscale 👍
@craigackerman9574
@craigackerman9574 7 ай бұрын
Check this out from Klein . I think this will answer your question about why the handle is setup with the 12 point . Klein KNECT 65300 very cool.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Yeah I looked at those the other day. I may end p getting the 3/8 set. It is pretty cool. 👍
@ReebyPlaysGames
@ReebyPlaysGames 7 ай бұрын
Found something cool. Wiha insulated bits fit nicely in the little 1/4 in the middle
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
👍👍… so the middle section that you put the impact ends in? Bits like these? amzn.to/3QNE8Y0
@ReebyPlaysGames
@ReebyPlaysGames 7 ай бұрын
Yeah they hold decent. I figured since the bit has a suction when I pull it out I'd try it and it works great.
@ReebyPlaysGames
@ReebyPlaysGames 7 ай бұрын
I've looked everywhere for an adapter to 1/4 and can't find one anywhere.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@ReebyPlaysGames yeah I think they do all that on purpose… want to to be a returning customer for bits and drivers when one breaks.
@joerodriguez8546
@joerodriguez8546 2 ай бұрын
Found it Riley knifes n tools 👍🏼
@MORGANSMaintenance
@MORGANSMaintenance 2 ай бұрын
👍
@thebackwoodsmechanic5029
@thebackwoodsmechanic5029 3 ай бұрын
I stood in the store for an hour, debating on what to buy. After watching this, I want to go try the Ratcheting driver but I walked out with the standard 11 in 1. Nice info. My question is, how much slop do you have in the handle? Does the teeth grind any? How smooth function is it after some heavy use?
@MORGANSMaintenance
@MORGANSMaintenance 3 ай бұрын
It’s not the best ratcheting screwdrivers in the world… but for the price it’s pretty good. I’m not a big ratcheting screwdriver person so mine hasn’t got extreme heavy use (as a ratcheting) since I’ve picked it up. I don’t use a ratcheting screwdriver enough that most of the time I forget it’s even an option and I leave it in the locked position... too much muscle memory in my old brain of a regular screwdriver motion. 😂. The amount I have used it, it has worked fine. I also have so many screwdrivers, I swap around a lot. Hopefully some others can help you out with a better heavy use scenario that use a ratcheting style 100% One thing to keep in mind is that I believe the KNECT 1/4” set I believe only works with the ratcheting. I could be wrong on that, but I think that is true. So if you are thinking about getting that in the future, that may be a part of the decision.
@Eddy63
@Eddy63 7 ай бұрын
Cha-ching is what I hear when you're site pop's up in my menu Good product as usual ... Thx from Eddy Pu.D
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Glad I can help you spend your money 😂👍👍
@AlexDresko
@AlexDresko 7 ай бұрын
Can you put the three-piece Klein nut driver shaft on it? That seems like the ultimate screwdriver, but I don't know if if that would be a good idea due to how long it would make the screwdriver.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
You can put it on there since it has a 1/4 shaft. It is only a little bit longer than in the normal flip socket handle, you just have to attach it to the middle piece and get rid of either your 3/8 or 5/16 attachment.
@brianhall9019
@brianhall9019 7 ай бұрын
I’m the same about ratcheting screwdrivers, the placement always seems off, or the back drag is too much. I have Vessel ratcheting and like being able to dial it. I might have to pick this up to replace my Klein 11-n-1. I’ll set up the barrel of my current one with a specialty set up and keep that beside the new one. Thanks for the video.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
That’s why I end up just leaving them in fixed… which makes them not worth spending the extra money on. 👍👍
@brianhall9019
@brianhall9019 7 ай бұрын
I just received Milwaukee 15” structured tool tote. Unboxing tomorrow. I don’t have Veto bags but some of the original packout tool bags. You almost convinced me to get a Veto, but I do love my packout. It’s as pricey as Veto, so if I don’t like it it’s going back and I’ll ask you for a Veto selection.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@brianhall9019 yeah I looked at those too. They do look nice. There is something about the pockets of a Veto. They are just different… or at least that’s what my mind tells me to justify the price 😂
@brianhall9019
@brianhall9019 7 ай бұрын
I’ve never accessed a Veto. A lot of pockets collapse in on themselves. I’ll let you know what I think of it. It’s $269…but snagged Home Depot buy more save more deal ($50 off $199, $90 of $299) I threw in a $35 packout 1/2 organizer and got it all for $215…I can justify anything..😂😂😂
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@brianhall9019 we sound a lot alike 😂😂
@sykotictendencies6032
@sykotictendencies6032 7 ай бұрын
The ratcheting one goes with the pass through wrench kit . The extension fits in the 12 point screwdriver handle and makes a long shank nut driver .
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Yeah I’ve seen that. I haven’t decided if I’m getting it yet. It’s a little pricey for the sizes you get… but who am I kidding, I’m sure I’ll get it 😂 Appreciate it 👍👍
@sykotictendencies6032
@sykotictendencies6032 7 ай бұрын
@@MORGANSMaintenance I got the set yesterday haven’t used it yet but it’s easier to carry than all the different nut drivers so I figure it’s a win .
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@sykotictendencies6032 true… anytime I can find ways to loose handles in my main bag is a win. My Lowe’s still isn’t carrying it yet, I’ve been waiting till I can just go in and get it.
@phillipmoody710
@phillipmoody710 7 ай бұрын
I swapped out the torx bit for a P3 and the square for a Milwaukee ECX bit on mine.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I have a double ECX that I use occasionally too. It’s not impact rated, but I rarely take bits out of these and put them in my impact anyway. It’s just nice to have the option
@phillipmoody710
@phillipmoody710 7 ай бұрын
@@MORGANSMaintenance right, not sure if mine is either but I don't torque those screws to hard so I'm good with it on a drill.
@michaelwilliams7031
@michaelwilliams7031 4 ай бұрын
What is that Klein handle directly in front of you on your videos? Is it a bit holder or coffee thermos
@MORGANSMaintenance
@MORGANSMaintenance 4 ай бұрын
It’s a coffee thermos, I found it on eBay
@justinpena1096
@justinpena1096 7 ай бұрын
Its also compatible with the new Klein Knect pass through socket set
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Yeah I saw that… I may end up picking it up, but haven’t 100% decided yet. Pretty pricey for the sizes you get.
@mozzberg590
@mozzberg590 2 ай бұрын
I just picked up this and the socket kits, 1/4 and 3/8 mod box kit
@MORGANSMaintenance
@MORGANSMaintenance 2 ай бұрын
👍👍 My Lowe’s just put out some of the pass thru sets and the deep wells I reviewed in last little bit. I think I might buy the 1/4” pass thru.
@mozzberg590
@mozzberg590 2 ай бұрын
@@MORGANSMaintenance I haven't opened it yet because I think the packaging is wrong. The package shows the ball detent on it like the older 11-1 impact version
@MORGANSMaintenance
@MORGANSMaintenance 2 ай бұрын
@@mozzberg590 so you got the kit with a screwdriver inside the mod box? I saw that one too, but didn’t really look at it.
@mozzberg590
@mozzberg590 2 ай бұрын
@@MORGANSMaintenance no, I got the 32500HDRT and the 1/4 and 3/8 modbox
@MORGANSMaintenance
@MORGANSMaintenance 2 ай бұрын
@@mozzberg590 👍👍.. if I remember right, the ratcheting is held in with a ring… now the bit holders of the 11-1 are still ball bearing. I don’t think they have two options though, so I’d say if yours has the black ratcheting adjustment it should be the right one.
@MrCabimero
@MrCabimero 28 күн бұрын
Sir what is the name of the sheath you used for this driver? Where can I get one? Thanks!
@MORGANSMaintenance
@MORGANSMaintenance 28 күн бұрын
It’s at Rileyknifeandtool.com He has a few different options. I have a few videos about them and the stubby versions
@jljjoubert3611
@jljjoubert3611 Ай бұрын
Goodday sir,forgive my ignorance. You mentioned you're go to screwdriver. The particulars of this screwdriver will be appreciated,or is it the same as the one aforementioned? Thanks Cobus🐳
@MORGANSMaintenance
@MORGANSMaintenance 29 күн бұрын
This is a ratcheting screwdriver option for the one I mention as “my go to” which is this one Klein Tools 11-1 IMPACT Screwdriver - It's What Else You Can Do With The Screwdriver that Matters! kzbin.info/www/bejne/houspmqEia12j8U They are the same screwdriver… one is a ratcheting version and one is not.
@justinjones3499
@justinjones3499 7 ай бұрын
The new one they made like that because their new impact pass through socket set you can actually fit the sockets in the end of the screwdriver handle and make a pass through ratcheting nut driver
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
👍👍 Yeah I’ve had a few people mention those to me. I may pick up a set of those Appreciate it
@justinjones3499
@justinjones3499 7 ай бұрын
@MORGANSMaintenance other brands have them such as husky gearwrench etc. And they are hit and miss I mean it's a specialty tool not something you would use all the time unless you wanted to it would beat having to have shallow and deep well sockets but unfortunately klein is known for electrical tools however if they expanded into a full blown 1/4 3/8 1/2 impact rated set of pass through sockets I'm sure they would make a killing
@dwayneruffin15
@dwayneruffin15 15 күн бұрын
Where do i get that holder for your screw driver?
@MORGANSMaintenance
@MORGANSMaintenance 15 күн бұрын
Rileyknifeandtool.com I have a video for them, and also the stubby versions
@brandonb8103
@brandonb8103 7 ай бұрын
Klein should be sending you a pay check if they arent. Just curious, do you ever hit the ratcheting switch by mistake? It looks so close to the handle where ill hold it. Regardless im gunna check it out.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I haven’t on this one yet. I do on my Vessel from time to time. They are the only two I use. I know Klein or Milwaukee could at least send me some swag 😂
@charlesviner1565
@charlesviner1565 7 ай бұрын
👍
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Thank You 👍👍
@llanbull
@llanbull 7 ай бұрын
Klein killing me with their new screwdriver models. They’ve been churning them out pretty fast.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I know… it’s like a new one every week.
@adubcollectibles3201
@adubcollectibles3201 7 ай бұрын
I got one and I love this due to the new socket set works with cause of the new design so I bought both and it’s a life saver
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@adubcollectibles3201 👍
@craigackerman9574
@craigackerman9574 7 ай бұрын
I’m not sure if the sockets from the 3/8 will fit in the ratcheting screwdriver handle
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
👍… I’ll check it out and see. Thanks for the heads up
@xys5478
@xys5478 7 ай бұрын
Nice tool. Now we need metric version. Regards from Europe 😅
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
As many people that have requested it, you would think someone would make it. 👍
@bigdaddy4975
@bigdaddy4975 5 ай бұрын
That screwdriver also fits the pass thru 1/4 inch socket set.
@MORGANSMaintenance
@MORGANSMaintenance 5 ай бұрын
I’ve seen that… not at my Lowe’s yet, but I’ve seen a few videos. Thanks for the heads up 👍
@bigdaddy4975
@bigdaddy4975 5 ай бұрын
My Lowe’s had a ton of them
@MORGANSMaintenance
@MORGANSMaintenance 5 ай бұрын
@@bigdaddy4975 mine does have a slot for them at least now. I just looked today… but they are out
@bigdaddy4975
@bigdaddy4975 5 ай бұрын
@@MORGANSMaintenance Amazon with just these two tools you can do 95 % of all jobs
@ky4442
@ky4442 5 ай бұрын
Can I ask if any of you all have had trouble with this screwdriver? I bought one last night at lowes and opened it and the whole mechanism came apart first thing. Then I went back to exchange it today and on the new one the half inch hex part where the two impact sections go is stuck in the handle. Are any of you all having problems?
@MORGANSMaintenance
@MORGANSMaintenance 5 ай бұрын
I haven’t had an issue with mine yet, maybe some others will chime in.
@wim0104
@wim0104 7 ай бұрын
excellent, they learned from Vessel
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I definitely like the placement of it better… more likely to use it than just leave it in the fixed position 👍
@HVACR_ToolNut
@HVACR_ToolNut 7 ай бұрын
Lowes is the only place I can find this, but when I go to place the order it says item removed from your cart. But it's still in my cart. I tried this today, and I tried it a few days ago and the same thing! Anyone know where I can waste my dang $ already!?
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Lowes is the only place it’s available for now… I’m not sure what’s going on with your cart
@oozy_cougar
@oozy_cougar 6 ай бұрын
Whete can i get the riley sheath? Thanks
@MORGANSMaintenance
@MORGANSMaintenance 6 ай бұрын
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein youtu.be/l rileyknifeandtool.com/?post_type=produc
@WoodyRules
@WoodyRules Ай бұрын
Riley sheath link?
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
Rileyknifeandtool.com
@gilbertlangat1036
@gilbertlangat1036 Ай бұрын
Hello everybody, I am "Buddy"
@MORGANSMaintenance
@MORGANSMaintenance Ай бұрын
Hey buddy 👍
@gearstuffs8007
@gearstuffs8007 7 ай бұрын
Hi! Can we get that sheath?
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein kzbin.info/www/bejne/gYmqoXt5a9iksKs I will have to look up exactly what the website is
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
rileyknifeandtool.com/?post_type=produc
@robertcaceres3428
@robertcaceres3428 6 ай бұрын
Where can I get the sheath
@MORGANSMaintenance
@MORGANSMaintenance 6 ай бұрын
It’s at Riley Knife and Tool… I have a video here with links in the description Klein Tools Screwdriver Holster from Riley Knife & Tool - Fits your favorite EDC? #tools #klein kzbin.info/www/bejne/gYmqoXt5a9iksKs I will have to look up exactly what the website is but I believe it’s Rileyknifeandtool.com
@Jesus_Strong
@Jesus_Strong 7 ай бұрын
Which Malco size shank is that?
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
It’s the shorted one they sell (I believe 2”)… I think 2-3/4” is the longest you can fit of something into the shaft.
@Jesus_Strong
@Jesus_Strong 7 ай бұрын
@@MORGANSMaintenance awesome, thanks brother.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
@@Jesus_Strong 👍
@markdotson607
@markdotson607 7 ай бұрын
So close to perfect they need to make it all magnetic so i dont need the single bit and make the nut driver like there multi nut driver so they hold the nuts lol
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
They have you sell as many prototypes as possible before they give you the tool you will never replace 😂
@five6aceinyaface
@five6aceinyaface 7 ай бұрын
This one is damn near impossible to find. Even online. No one has it.
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Home Depot just started carrying it too. I noticed it today.
@rodolforubio9743
@rodolforubio9743 7 ай бұрын
Not a racheting screwdriver type of guy lol
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I wanna like them, but they tend to just get left in the “fixed” position. I just been turning my wrist for too long and My muscle memory hasn’t been programmed to use them. I know many people really really like them.
@srhndz
@srhndz 7 ай бұрын
They Made it to work with and fit there new line Klein KNECT coming out. i.e. Klein Tools 32-Piece Standard (SAE) 1/4-in Drive 6-point Set Deep Socket Set Item #5389731 | Model #65300 at lowe's try it out on your channel and let us know that you think. Check out the Klein KNECT in this Video: kzbin.info/www/bejne/eYCYfohppLprrdk
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
Someone mentioned those yesterday. I will have to give them a look. Thanks 👍👍
@desertreaper2769
@desertreaper2769 7 ай бұрын
I'm tired of klein...they are always trying to get my money😂
@MORGANSMaintenance
@MORGANSMaintenance 7 ай бұрын
I’ll give it to them…They keep coming out with stuff. I don’t use as much of their stuff as I used to, but they are still getting quite a bit of my money 😂
ROCK PAPER SCISSOR! (55 MLN SUBS!) feat @PANDAGIRLOFFICIAL #shorts
00:31
UFC Vegas 93 : Алмабаев VS Джонсон
02:01
Setanta Sports UFC
Рет қаралды 219 М.
Универ. 10 лет спустя - ВСЕ СЕРИИ ПОДРЯД
9:04:59
Комедии 2023
Рет қаралды 2,5 МЛН
Wait for the last one! 👀
00:28
Josh Horton
Рет қаралды 86 МЛН
This blows away the competition! Klein ModBox Tool Storage!
13:40
The Outlaw Effect
Рет қаралды 42 М.
9 tools I regret not buying sooner
20:15
MWA Woodworks
Рет қаралды 1,8 МЛН
Klein Tools 32500HD Impact Rated 11 in 1 Multi-Bit Driver
7:31
The Tool Review Channel
Рет қаралды 30 М.
[1 YEAR REVIEW] Klein screw driver (32500HD)
2:43
Harrells tips tricks and reviews
Рет қаралды 794
How to use a multimeter like a pro, the ultimate guide
12:55
James Gatlin
Рет қаралды 1,6 МЛН
10 Worst Items Ever Tested? Let’s Find Out!
20:40
Project Farm
Рет қаралды 1,4 МЛН
Klein "Super Screwdriver" - Super Stubby and new Tools at Lowes
11:20
Jonathan Davenport
Рет қаралды 16 М.
My 2024 COMPACT TOOLKIT with NO Compromises
20:32
Jon Gadget
Рет қаралды 176 М.
How to get convenience store snack for free
1:00
Mykoreandic
Рет қаралды 27 МЛН
Pura Pura Keracunan Lagi #shorts
0:16
AKU ELIP
Рет қаралды 29 МЛН