NEW Klein Tools KNECT Starter Kit 65300KNECT

[@fshn76]

Love my Kinect series. I am always a sucker for Klein, lol. Good Video Adrian.

[@mkennedy319]

(HVAC Tech) I replaced my pass through knectS set with this in my packout structured bag as my tech only bag. My goal is to maximize the space and do more with less. It allows me to get rid of the previous screw driver as well.

[@UnhumanNewman]

The only thing I wish they made was a “short” extension, that made the pas thru sockets closer in length to those deep sockets. I might have to make one myself if they don’t come out with one

[@HVACR559]

I just got the 65400. It doesn't have the bits that are in the 65300 that will just get lost, but gives more socket sizes including the 3/4, that you need for the pullers. My ultimate setup: Klein - 65400 Pass-through ratchet, extension, impact adapter, 3/8 socket adapter 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4. Klein- 32907 Quick-connect handle 1/4, 5/16, 11/32, 3/8, 7/16 & 1/2 (just for the handle) Klein- 32934 9-in-1 Impact Rated Flip Socket Set 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 3/4 The 32907 handle paired with the 32934 fits in one sleeve in the bag. Get the 32907 over the 32910 to get the 11/32. Too bad they don't sell 32934 with a handle. 32907 quick-connect handle 1/4, 5/16, 11/32, 3/8, 7/16 & 1/2 32910 quick-connect handle 1/4, 5/16, 3/8, 7/16, 1/2 & 9/16 Day to day I still use my old Malco 5/16~1/4 because it's slender and tough as nails. Leaving the Klein on the handle in the bag available when I need it.

[@ReliableHVACR]

Thanks for the info there, I might try some of those

[@HVACR559]

​@@ReliableHVACR In my previous comment I suggested buying the "Klein - 32907" just to get the handle SCRATCH THAT! There's a way way way better option. The Klein 32751 - Adjustable Screwdriver, #2 Phillips, 1/4-Inch Slotted". This is an adjustable flip screw driver with the shank adjustable from 4" to 8". The handle will also accept anything that has an impact shank as well, so it will work with the Klein - 32934 & 65400 as well. If you just want a handle you can buy the Klein - 32619. Now I believe that is the ultimate Klein HVAC setup: 32581- Multi-Bit Electronics Screwdriver, 4-in-1, Phillips, Slotted Bits 32293 - Flip-Blade Insulated Screwdriver, 2-in1, Ph Bit #2, Sl Bit 1/4-Inch (Treat with TLC only use when shock hazard is present) 32751 - Adjustable Screwdriver, #2 Phillips, 1/4-Inch Slotted 32619 - Adjustable Length Screwdriver Handle (used with 32934 & 65400) 32934 - 9-in-1 Impact Rated Flip Socket Set 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, and 3/4 65400 - Pass-through ratchet, extension, impact adapter, 3/8 socket adapter 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4. 32527 - Multi-Bit Screwdriver / Nut Driver, 11-in-1, Ph, Sl, Sq, Schrader Bits (This tool stays in the van) K19 - 9" Phillips Screw Holding Screwdriver (Holds & starts Philips screws without magnets.) 32561 - Multi-Bit Screwdriver / Nut Driver, 6-in-1, Stubby, Ph, Sl Bits 65200 - Slim-Profile Mini Ratchet Set, 5-Piece

[@Qualityservicesbcs]

What I’d like to see is a set of those sockets in all the sizes . For 1/4” and 3/8”

[@ReliableHVACR]

They got different kits, you might have to mix and match

[@gregbradshaw9415]

Great video! Going to grab one from Lowe’s this weekend.

[@yanslabrada8904]

Amazing tool ! What tool do you usually use for a ECM motor diagnostic?

[@Coop442s]

This in metric would be a great glove box set for the car.

[@connorj.dunckel4223]

my first thoughts after grabbing one

[@milwaukee_69]

I am waiting for the set to come on Amazon to order it

[@Wattshappening]

I’d be swapping out those star bits with some Allen bits to handle the fan blade hubs and pulley set screws

[@Wattshappening]

Big time bummer on the 11/32’s

[@ReliableHVACR]

Would have been perfect little kit for sure with 11/32. And I definitely have some Allen bits but I use them with the smaller electricians ratchet and it works very well

[@Michael-q6v]

Great video

[@markdotson607]

They need to make a magnetic socket and make the wrench a flex head, and then it would be perfect

[@NeverFollowTheCrowd]

I wonder if Lowe’s has it

[@andrej2321]

They do and it is on special rn.

[@Qualityservicesbcs]

Is the only difference the added flip socket and handle

[@ReliableHVACR]

And 11/32! Wish it would've been included

[@MattHmm-rq6dn]

Watch Morgan's maintenance they make a 150 dollar master set with all of it. They also make a 99 dollar set with metric and sae that should cover your bases.

[@DrLobotamy]

does klein sell replacements for these pass through sets?

[@ReliableHVACR]

Haven't seen em but I wish they would

[@effinburnttoast]

Throw the 1/4 in the handle.