New LASER Power Record on my LPM?!? | LaserCube Ultra 750K Subs Special

  Рет қаралды 69,883

Brainiac75

Brainiac75

Күн бұрын

Пікірлер: 246
@wickedlasersvids
@wickedlasersvids Жыл бұрын
Stunning video you did there (as usual!). Thank you for opening the Cube! Your calculations, meticulous measurements and describing "what's inside" were top-notch, totally! I think we have to start working on 10W LaserCube to celebrate 1M subs with you! 😁
@SilesiaLasers
@SilesiaLasers Жыл бұрын
🔥
@aarongreenfield9038
@aarongreenfield9038 Жыл бұрын
We're all anticipating the day when you're finally testing your phased plasma rifle in the 40W range.
@brainiac75
@brainiac75 Жыл бұрын
Hehe, wish I had more time to work on that ;)
@pjt
@pjt Жыл бұрын
How do you use the 3 sea shells?
@aarongreenfield9038
@aarongreenfield9038 Жыл бұрын
@@pjt You crush them into sharp pieces and pile them on the floor, then you step on them, The pain will make you curse out loud and you will get fined 2 credits for each curse word, then you take those fine slips, and there's your toilet paper.
@pjt
@pjt Жыл бұрын
@@aarongreenfield9038 The internet has peaked. Shut it down
@aarongreenfield9038
@aarongreenfield9038 Жыл бұрын
@@pjt Gladly 📴
@DANGERTIM112
@DANGERTIM112 Жыл бұрын
Congrats on the new milestone, keep up the intersting tests and informative videos :D
@brainiac75
@brainiac75 Жыл бұрын
Thank, Tim :) Much more to come.
@Zenodilodon
@Zenodilodon Жыл бұрын
Thanks for the shout out! Looks like the laser head might be manufactured by OPT. Very glad to see that there is a glass plate installed in front of your reds. Those are probably open can and I have seen those glass plates be a savior for open can reds. That is a bit of power in a nice little box. I don't recognize the galvos, any markings on them/the amp? Excellent video, and review! Oh, one interesting thing to try with your higher power laser. Hang a black piece of thin fabric up and can the laser on it with a pattern. You should clearly hear the laser firing on the fabric from 2 foot away!
@Zenodilodon
@Zenodilodon Жыл бұрын
Also, a slight correction to your understanding of the lenses. You're partially correct, however the fast axis correction is normally on the laser diode, I think they are on your reds. The 3 optics after the laser diode/FAC that you see kind of work like this. The first lens is there to allow correction by shifting the collimating point and angle of the laser beam on the horizontal axis. The last 2 lenses are the collimating lenses, one for horizontal and one for vertical. Since the focal point of the horizontal output has been shifted the collimating lenses per axis can be done with lenses in different spaces from the laser diode. This break of the 2 axis allows for various trade offs like having a thinner fast axis for the knife edge mirrors with I think slightly more divergence VS the slow having a wider beam at the start but lower divergence overall. With cylindrical lenses the real trick is to think of a single laser is behaving like 2 independent ones in the same space, or at least is does for me. It's actually astonishing how well these lenses collimate multimode lasers diodes. I might be a fan of good old spherical lenses, but they limitations in flexibility.
@SilesiaLasers
@SilesiaLasers Жыл бұрын
I love your videos! And seeing LaserCube 7.5W Ultra (which is also a part of my laser equipment) was terrific! Keep it up!
@Mr.Unacceptable
@Mr.Unacceptable Жыл бұрын
First time looking inside one of these units. Very cool. Way more complicated than I thought. I knew there was a lot of specialize parts but not the complicated arrangement.
@JustPyroYT
@JustPyroYT Жыл бұрын
Congrats on hitting *750.000* Subscribers! You really deserve it! 🎉🎉🎉 And of course a great Video as always 👍
@brainiac75
@brainiac75 Жыл бұрын
Thanks, JustPyro! Glad you like and still watch my videos. Much more to come!
@GQuack
@GQuack Жыл бұрын
Congratulations once again for achieving this milestone! Here's to another 750k, and even more developments in amateur science like this!
@GeekIWG
@GeekIWG Жыл бұрын
750k! Congrats and well earned! I'm always excited to get notifications about new videos on your channel. It's always some really fascinating content! This one's no exception. Those indeed are some beautiful optics.
@Xoars
@Xoars Жыл бұрын
I've learned a lot from your videos especially about lasers and safety. Thank you!
@Tevosilverfox
@Tevosilverfox Жыл бұрын
Congrats on the 750k - You prove that awesome quality videos are well needed on youtube :)
@ronsku57
@ronsku57 Жыл бұрын
Congratulations!!! You deserve it!
@lrrromicronpersei8294
@lrrromicronpersei8294 Жыл бұрын
Congratulations on 750,000 subs been a long time coming. You deserve it. Keep up the great work
@brainiac75
@brainiac75 Жыл бұрын
Thank you very much! My first video was uploaded in 2009, so it sure has been a long journey already. But I'm not stopping yet :)
@lrrromicronpersei8294
@lrrromicronpersei8294 Жыл бұрын
@@brainiac75 I just looked back at the videos you did in the beginning and I think the first video I remember seeing was the raw magnetic force 12 years ago I had a different name on KZbin then but pretty sure I have been a subscriber since that video lol. I remember you getting the big magnets delivered and the tools you made to separate them and put them together lol. Looking forward to the future
@Twork6969
@Twork6969 Жыл бұрын
@@brainiac75 Oh I born on 2008 ;D
@hydroxa4330
@hydroxa4330 Жыл бұрын
I honestly love this channel. Been watching for a good few years now, and I love how easy to understand you make everything, as well as putting an emphasis on safety whenever you do something dangerous. You remind people that while this stuff is very interesting and exciting, keeping ourselves healthy is just as important as what we gain from exploring and experimenting. Thank you for what you do!
@nakfan
@nakfan Жыл бұрын
My words, too
@LordBlee
@LordBlee Жыл бұрын
@brainiac75 I just wanted to say thank you for all of the content you make. My field of study was electrical engineering about 100 years ago. I have never worked as an EE, so your content is the only exposure I have, so thank you very much. Keep up the great content!
@yin-fire3263
@yin-fire3263 Жыл бұрын
This is so amazing! This kind of information is hard to come by, and the video quality is awesome. Thanks for sharing this with us.
@godlugner5327
@godlugner5327 Жыл бұрын
Ohhh I've loved this laser for YEARS I wan one so badly to add to my DMX light show 😍
@ransomxvi
@ransomxvi Жыл бұрын
Awesome! It's really cool how they were able to get RGB laser light.
@SQ-619
@SQ-619 Жыл бұрын
Congrats on your milestone! Can't wait for you to get to a million. I absolutely love your content and enjoyed it for the la 2 years. You taught me a lot! Big hats up to you!
@EdgarCorona
@EdgarCorona Жыл бұрын
Congrats on 750k!
@brainiac75
@brainiac75 Жыл бұрын
Thank you very much! Still find it a little hard to grasp...
@Sir-Dexter
@Sir-Dexter Жыл бұрын
happy 75 ....good luck ....
@aarongreenfield9038
@aarongreenfield9038 Жыл бұрын
I see watt you did there.
@xa-xii4865
@xa-xii4865 Жыл бұрын
Styropyro: Hmm.. Interesting.
@inductivelycoupledplasma6207
@inductivelycoupledplasma6207 Жыл бұрын
Great video! Amazing optical design!!! Congratulations on reaching so many subs! Always loved your vids from the start. I would love to see some vids about HV or just electricity as a whole. Get yourself a large HV transformer, and pull some huge arcs :) You could also measure the spectrum of the light produced, and see how it varies with electrode material. You could also talk about power factor, resonant capacitors (and LC oscillation in general), among other things!
@AntimatePcCustom
@AntimatePcCustom Жыл бұрын
Kæmpe tillykke med de 750k subscribers! :D
@brainiac75
@brainiac75 Жыл бұрын
Tusind tak! Det er uvirkeligt for en jyde som mig :o)
@AntimatePcCustom
@AntimatePcCustom Жыл бұрын
@@brainiac75 ja det tror jeg gerne på! :D selv en glad vestjyde 🥳
@LtKernelPanic
@LtKernelPanic Жыл бұрын
Congrats on 750k. That thing is awesome and has a price tag to match! I have a cheap half watt laser projector I bought years ago that is still pretty cool. I really should get a decent DAC to drive it with and fire it up again.
@nochipmunks8692
@nochipmunks8692 Жыл бұрын
I've been watching your videos since a very long time , kinda nostalgic , congratulations
@yinq5384
@yinq5384 Жыл бұрын
Congrats! The mirror set is beautiful indeed ^_^
@ThomasAndersonbsf
@ThomasAndersonbsf Жыл бұрын
love the equipment expose in the case by the way, I have a number of dichromic lens/mirrors and a color combining cube that still amaze me no matter how often I get to toy around with them.
@The_Modeling_Underdog
@The_Modeling_Underdog Жыл бұрын
Fascinating video, mate. Congratulations on the 750k subs.
@guillermogil3391
@guillermogil3391 Жыл бұрын
Congratulations on archiving such an amazing number!!!
@imsmart.
@imsmart. Жыл бұрын
I already know you will reach at least 1M no problem, congratulations, keep up the good work!
@iamdarkyoshi
@iamdarkyoshi Жыл бұрын
750K subs with real high quality content is a very impressive achievement. You've earned it!
@UNVIRUSLETALE
@UNVIRUSLETALE Жыл бұрын
It's very pretty on the inside, congrats for the 750k
@belken117
@belken117 Жыл бұрын
Yo congrats for the huge milestone on your channel! I have watched your stuff for years, forgot exactly. This laser box is a beauty of bright color and mirrors! ^^
@REZZILIENCE
@REZZILIENCE Жыл бұрын
This channel is underrated. I enjoy all the videos. Informative, and I find this content somewhat soothing. 👍👍
@rlg222
@rlg222 Жыл бұрын
It's been awhile since I've been back to your channel. I've always wanted a laser cube when they first came out before C-19 started. I never got the chance. They seem like a legitimate company so I figured the specs were pretty accurate. Thanks for the unveiling!
@Stripeyy
@Stripeyy Жыл бұрын
Congratulations man I really love all your videos and hope to see many more from you!!! Also I've got an idea could you try and place multiple pop markers next to each other to try and get that 15s warmup time
@brainiac75
@brainiac75 Жыл бұрын
Thank you very much, Stripey! Sounds like a great idea. Will need to try if that works, though they will have to be very close :)
@madbstard1
@madbstard1 Жыл бұрын
That was so beautiful inside.....such a work of art! And congratulations on the 750K subs. Am thankful that I found your page (and MyPlayhouse) on that old magnet destroyed fan video you guys sent to BigClive.
@adnanabdillahghifari720
@adnanabdillahghifari720 Жыл бұрын
Wow 750K subs! ¾ of the way to a million! Congrats Brian!
@alexleo-wolf4339
@alexleo-wolf4339 Жыл бұрын
Always fun to watch this.
@brainiac75
@brainiac75 Жыл бұрын
Thanks for the early watch! I will never be tired of watching laser shows inner workings...
@qutube100
@qutube100 Жыл бұрын
Great news and thanks for the Shoutout for Zenodilodon the guys is a LEGEND!
@alexanderhedin4005
@alexanderhedin4005 Жыл бұрын
Looking forward to this video. I am so happy that you have reached 750 000 subscribers. You are a channel who many look up to. There are so many interesting things you have shown that is both fun and valuable to watch
@brainiac75
@brainiac75 Жыл бұрын
Thank you so much, Alexander. Much more to come!
@gedw99
@gedw99 Жыл бұрын
Outstanding The precision of making the beam coliminator in the factory must be tricky !!
@naomi10260
@naomi10260 Жыл бұрын
ayeeee zeno! hes taught me a ton too :3 and congrats on the 750k! yeeee haw
@FurrKnight
@FurrKnight Жыл бұрын
Outstanding progress! your inquisitiveness and honesty in a world of so much turmoil and disinformation are so refreshing to my mind, like a true Oasis shining in a sea of mirages.
@Graham_Rule
@Graham_Rule Жыл бұрын
That was absoboodylutely amazing.Your photography of the diodes and light paths was so clear. I wonder how many of your subscribers will make use of the detailed instructions on how to dismantle that laser. I know that I will ever own one and wouldn't trust myself to even turn it on if I did. But thanks for letting me see the magic.
@metalpipe71
@metalpipe71 Жыл бұрын
Do not get scammed by the fake brainiac75
@vankyu4251
@vankyu4251 Жыл бұрын
Congrats man, well deserved
@nakfan
@nakfan Жыл бұрын
Wow… Great content 👍 Very high qualities video(s) Thank you so much for beaming on 😃
@jasonl3445
@jasonl3445 Жыл бұрын
Looks amazing! And congrats
@catofthekitten
@catofthekitten Жыл бұрын
very interesting coincidence with numbers ive been watching since the laptop meets monster magnet videos and ever since ive been hooked to this channel 😅
@metalpipe71
@metalpipe71 Жыл бұрын
Do not get scammed by the fake brainiac75
@catofthekitten
@catofthekitten Жыл бұрын
@@metalpipe71 yeah thanks for the heads up! these stupid scammers are all over the place but i didnt think they'd even target brainiac75.. they must be really desperate for money with the amount of channels they target..
@TomPvPGaming
@TomPvPGaming Жыл бұрын
AWESOME video congrats on 750,000. somebody needs to send one of these cubes to @Styropyro
@piconano
@piconano Жыл бұрын
I press like before even watching your videos. I know it'll be good, and haven't been wrong yet. 1 Million subs is just around the corner with this type of quality content.
@tapthestickman7732
@tapthestickman7732 Жыл бұрын
Always good to see your videos.
@miragelee9754
@miragelee9754 Жыл бұрын
Congratulations! Just need 250k more but for now, let’s celebrate 🎉🎉🎉
@JadeLockpicker
@JadeLockpicker Жыл бұрын
Congrats on the subscriber goal. But wow. if 7.6 is roughly 92% of full power... that makes that thing actually an ... 8.3 watt combined power, if my math isn't completely out of whack. That's... uh, that's a kicker.
@brainiac75
@brainiac75 Жыл бұрын
Yeah, not sure how high it would go given 5-10 seconds more. Should be at least 8 watts. Probably the blue diode that's going crazy ;) Thanks for the early watch!
@DanielGBenesScienceShows
@DanielGBenesScienceShows Жыл бұрын
Congratulations! You deserve it! 🤘❤️🤘
@jimmyrk3
@jimmyrk3 Жыл бұрын
Cool new laser. Thanks for the info about it...
@sharg0
@sharg0 Жыл бұрын
Congrats on the 750k! And for the cube I have just one word.... WANTS! Not that I know for what I would need that much power and the thought also scares me - I want to keep my and others sight intact...
@scaleop4
@scaleop4 Жыл бұрын
well done on the subs man
@Dukefazon
@Dukefazon Жыл бұрын
Congrats! I think I'm watching you since 2017 at least.
@bbbenj
@bbbenj Жыл бұрын
Congrats and thanks for your videos!
@metalpipe71
@metalpipe71 Жыл бұрын
Do not get scammed by the fake brainiac75
@bbbenj
@bbbenj Жыл бұрын
@@metalpipe71 don't worry, I know it 👍
@SamTheFable
@SamTheFable Жыл бұрын
Congrats on giving 3/4 of a million people a reason to subscribe to you. May the remaining 1/4 find their way to your channel to fill the million.
@bladerunner752
@bladerunner752 Жыл бұрын
I am fascinated by the rust removal lasers used in restoration videos.
@_justteo
@_justteo Жыл бұрын
Congrats it's aproximated that you will reach 1M subscriber milestone in ~3 years (2yrs 9-10 months) You are my favourite youtuber I love your videos.
@106640guy
@106640guy Жыл бұрын
Great video as always.
@beatline
@beatline 7 ай бұрын
Can't wait to get my hands on mine. The 2.5 watt units are already bright. It be interesting to see the difference. No such thing as too many lasers
@HodorsLeftShoe
@HodorsLeftShoe Жыл бұрын
Truly amazing video.
@zion5700
@zion5700 Жыл бұрын
Congrats
@EnergyTRE
@EnergyTRE Жыл бұрын
well deserved sir. you have a great insight and imagination to experiment with respect to the laws of nature. thanks for the great content sir.
@brainiac75
@brainiac75 Жыл бұрын
Thanks, Michael. Much more to come!
@Marvinzock34
@Marvinzock34 Жыл бұрын
I love Lasers but sadly they are so expensive and i also love your videos!
@padddy48
@padddy48 Жыл бұрын
Nice man u really deserve it :)
@Xalar
@Xalar Жыл бұрын
Thanks for another great video, Brian! Jeg er sikker på at du nok skal nå 1 mio. subs snart
@brainiac75
@brainiac75 Жыл бұрын
Thank you, men der er stadig meget langt til en million...
@gblargg
@gblargg Жыл бұрын
1:49 Would it be more accurate to measure each color separately? It depends on the meter's wavelength response curve internally.
@Monkey-bo3xx
@Monkey-bo3xx Жыл бұрын
it would be a cool vid idea if you put uranium on a cpu
@michel_dutch
@michel_dutch Жыл бұрын
Tillykke med 750k!
@pusnirizda5481
@pusnirizda5481 Жыл бұрын
I was really hoping for some smoke inside to make beams visible. Like from vape(lol) smoke machine or somethign
@jeffafaaah
@jeffafaaah Жыл бұрын
I love you videos mate!!
@SeeYouInBluffington
@SeeYouInBluffington 10 ай бұрын
Congrats🎉
@MC-Racing
@MC-Racing Жыл бұрын
Til lykke med 750K tak for skide gode videoer :-)
@euclidallglorytotheloglady5500
@euclidallglorytotheloglady5500 Жыл бұрын
Stunning!!
@Kilgorio
@Kilgorio Жыл бұрын
wow
@SDS-1
@SDS-1 Жыл бұрын
Man this is a cool gizmo ❤️❤️❤️❤️
@RomanoPRODUCTION
@RomanoPRODUCTION Жыл бұрын
Fully adorable 6 beam cube 💢💢💢🥳🥳🥳
@Hnkka
@Hnkka Жыл бұрын
Thats a well build box
@LegendSpecialist
@LegendSpecialist Жыл бұрын
Great video 👍
@guyh3403
@guyh3403 Жыл бұрын
The aperture shield was wrongly designed though. A loose or forgotten to tighten screw should result in a closed aperture instead of open aperture. Other than that an amazing device!
@TwinSteel
@TwinSteel Жыл бұрын
That montage music sounded a lot like Zaboomafoo
@brainiac75
@brainiac75 Жыл бұрын
Never heard of them :/ Music credits in the description. Thanks for the early watch!
@TwinSteel
@TwinSteel Жыл бұрын
No worries - I know you didn’t steal it
@robtomx
@robtomx Жыл бұрын
This is amazing
@sebbes333
@sebbes333 Жыл бұрын
9:04 Why is there 3 red & only 1 blue laser? I thought the eyes perceive green the best, so why isn't it 1 green (then maybe 2 blue & 3 red? or whichever order our eyes best perceive red & blue?)
@dennismarkgrummesgaard2055
@dennismarkgrummesgaard2055 Жыл бұрын
Satme i orden! Danmark FTW! 😀
@defaultdriftco00
@defaultdriftco00 Жыл бұрын
Always a dangerous experiment to enjoy on here!
@sock501
@sock501 Жыл бұрын
I would love to see you build a laser lumia optical deck attachment for that guy, like the Laser Wobbulator but better.
@EyesOfByes
@EyesOfByes Жыл бұрын
7:14 Why not have a larger fan and heatsink to make it more quiet? Or would that affect other components? (Im not an engineer, of any kind..)
@MarcosGarcia-o9s
@MarcosGarcia-o9s 9 ай бұрын
What safety glasses do you recommend that would cover all those wavelengths?
@dsprecision4782
@dsprecision4782 Жыл бұрын
I have a handmade handheld laser smaller than most flashlights that will hit 7.65w on an LPM. There are smaller and more powerful modules out there also.
@Purple431
@Purple431 Жыл бұрын
3/4 of a MILLION?! Congratulations! Who else wants to get him to a mil?
@brainiac75
@brainiac75 Жыл бұрын
Unreal, right? Thank you very much - much more to come!
@Purple431
@Purple431 Жыл бұрын
^^
@YTBraN
@YTBraN Жыл бұрын
Excellent video. I'm intrigued though to know what the other 2 most expensive items in your arsenal are. Care to share please?
@metalpipe71
@metalpipe71 Жыл бұрын
Do not get scammed by the fake brainiac75
@dan.gmoller729
@dan.gmoller729 Жыл бұрын
Super video
@gblargg
@gblargg Жыл бұрын
1:37 That safety cover has a failure mode of opening up (if the screws are loose). Odd.
@metalpipe71
@metalpipe71 Жыл бұрын
Do not get scammed by the fake brainiac75
Full video - Data recovery from a dead MicroSD card
16:01
DevelopAKR
Рет қаралды 424 М.
Making high quality DIY Mic is easier than you think
14:42
BreakerSpace
Рет қаралды 12 М.
Thank you Santa
00:13
Nadir Show
Рет қаралды 54 МЛН
Как Я Брата ОБМАНУЛ (смешное видео, прикол, юмор, поржать)
00:59
Don't use strong lasers without this - easy to make!
11:44
Brainiac75
Рет қаралды 508 М.
What happens when you reflect a Laser beam back on itself?
13:02
I tried finding Hidden Gems on AliExpress AGAIN! (Part 9)
15:00
GreatScott!
Рет қаралды 1,1 МЛН
ABSOLUTELY HUGE Magnetic Induction Heater! Using 100 Spinning Neodynium Magnets And A Bucket
9:50
The Unexpected Genius of Bionic Propellers
11:48
Ziroth
Рет қаралды 1,8 МЛН
DIY Laser Image Projector (100ft+ Range!)
20:08
Ben Makes Everything
Рет қаралды 480 М.
SD Card vs. Radioactivity | Data Loss?
10:21
Brainiac75
Рет қаралды 1,1 МЛН
Are cheap laser cutters safe?
18:11
Maker's Muse
Рет қаралды 347 М.
What makes green lasers the BEST lasers?
11:44
Brainiac75
Рет қаралды 74 М.
Thank you Santa
00:13
Nadir Show
Рет қаралды 54 МЛН