New Leadscrew Nut and Saddle Install: CINCINNATI Tool and Cutter Grinder Restoration Part 6

CINCINNATI No. 2 Tool and Cutter Grinder Restoration Part 6: Making a new leadscrew nut and reinstalling the saddle.
*Some of the tools I use:
Brownells Oxpho-Blue Cold Bluing: amzn.to/3kJLkbC
Tsubosan Japanese Hardness Tester File Set: amzn.to/3Zv7tt0
Tsubosan Fine File Set: amzn.to/3mkf3bR
Chucking Reamer Set: amzn.to/3ZeQBqU
Mitutoyo 0.200” Diameter Edge Finder: amzn.to/3SHpzGa
High Speed Steel Round Bit Blanks: amzn.to/3Yh5V4M
YG-1 10-24 Thread Tap: amzn.to/3SH7LLl
YG-1 1/4”-20 Thread Tap: amzn.to/3YiiH3c
YG-1 3/8” 120 Degree Spotting Drill: amzn.to/3YhnwcM
Cutting Oil, Mobil 766: amzn.to/3ZsW8Kg
Air Blow Gun, Astro: amzn.to/3kJlHb4

[@Preso58]

Good job Yuchol. Looking sweet.

[@woodscreekworkshop9939]

Thanks Mark, really appreciate it.

[@jerekirkpatrick2092]

Nice to see a machine going back together. Jere

[@woodscreekworkshop9939]

Thanks Jere, it's taking awhile, but I can see the end finally.

[@edsmachine93]

Beautiful restoration. I like the paint color. Very modern looking. Thanks for sharing. Take care, Ed.

[@dermotkelly2971]

Great work! your workshop is so clean an tidy!

[@woodscreekworkshop9939]

You should see all of the stuff behind the camera.😭

[@michelecrown2426]

Thrilled to see the update on this project. And happy for you to reach this milestone.

[@woodscreekworkshop9939]

Thanks, I appreciate it.

[@christopherdwayne1110]

Ok time to let the cat out of the bag .thanks for another great video. Dwayne NZ.

[@woodscreekworkshop9939]

😃

[@sierraspecialtyauto7049]

Aw, c'mon...talk about the other machine! 😁 Grinder is looking really good.

[@woodscreekworkshop9939]

Thanks Joe.

[@Rustinox]

That was indeed a very nice fit on the nut. Only two more years to go and you're ready to grind something :)

[@woodscreekworkshop9939]

I hope I can get it done in 2 years, but you never know.🤣

[@kmaxon23]

Awesome content my friend! It is sooo very good to seeing you get a chance to get back to having some workshop time over there in Woods Creek! I've got my fingers crossed for you and I'm hoping that everything comes together perfectly on that machine.

[@woodscreekworkshop9939]

Thanks Kenneth.

[@ApukEldar]

Bravo Yuchol...Bravo!

[@woodscreekworkshop9939]

Thanks!

[@grntitan1]

That thing is gonna be nice when done, Yuchol.

[@woodscreekworkshop9939]

I may be too nice to use.😂

[@daveotto2190]

Wonderful attention to detail and craftsmanship! Great to see an update on your project!

[@woodscreekworkshop9939]

Thank you very much!

[@brucewilliams6292]

Your craftsmanship is great. This is looking so gorgeous you won't want to use it!

[@woodscreekworkshop9939]

I may have to baby it.😶

[@anmafab]

Have to watch your video over inheritance machining now!

[@N.Cognito]

IM is another great channel.

[@woodscreekworkshop9939]

Thanks for your kindness.

[@RRINTHESHOP]

Looking pretty good.

[@woodscreekworkshop9939]

Thanks Randy for all your help and letting me bounce off ideas.

[@outsidescrewball]

Enjoyed….great discussion and build…KOKO

[@woodscreekworkshop9939]

Really appreciate it. The manuals you sent have been invaluable.

[@noneofabove5586]

Very nice. I noticed you called out the "POP" can protection. Thanks

[@woodscreekworkshop9939]

Growing up in Montana, we called it "pop".👍🏻

[@WayneCook306]

Nice job nice machine thank you for the videos.

[@woodscreekworkshop9939]

Thanks for watching!

[@rayp.454]

That machine is looking like new Yuchol. Inside & out. You have a lot of patience.

[@woodscreekworkshop9939]

Thanks.

[@eddiekulp1241]

I operated 2 Cincinnati # 2,s for 31 years . There rugged machines. You can grind about any tool on them.

[@yvesdesrosiers2396]

M Yuchol, congratulations on another milestone achieved. You have an attention to detail like no other(probably OCD 🤣) . Kidding aside I really enjoy your videos because the material presented always is spot on. Hope you and yours are doing well. Stay safe. Cheers

[@woodscreekworkshop9939]

Thanks, really appreciate it.

[@DudleyToolwright]

Interesting angle setting of the compound technique. Excellent work as always.

[@woodscreekworkshop9939]

Thanks for your encouragement Robert👍🏻

[@inmyshedwithbc.]

Hello from Aus. I started work on my No 2 yesterday and made a vid on it. The first job is to mount a motor on top of the wheel head to make it similar to the later series No 2's. That way I can throw out all the old electrical equipment . Regards BC.

[@woodscreekworkshop9939]

I will check out the video, thanks.👍🏻

[@jonsworkshop]

Fantastic work Yuchol, I know exactly what you mean about light at the end of the tunnel! That looks superb with its new paint, a credit to your attention to detail and workmanship. Well done. Cheers, Jon

[@woodscreekworkshop9939]

Thank you so much 😀

[@glennwright9747]

Waiting to see how you handle the spindle

[@woodscreekworkshop9939]

You and me both😆

[@HM-Projects]

Hah, just made a coffee. Excellent timing.

[@woodscreekworkshop9939]

Cheers!

[@HM-Projects]

@@woodscreekworkshop9939 found you on LinkedIn, mad respect on your life / career decisions. Your kids are really lucky, just wanted to say that, cheers.

[@woodscreekworkshop9939]

@@HM-Projects thank you so much, means a lot. 🙏🏻

[@bid6413]

A pleasure to see your work. Congratulations on your progress. Beautiful! Cheers, Will

[@woodscreekworkshop9939]

Thank you! Cheers!

[@carlhitchon1009]

Beautiful restoration.

[@woodscreekworkshop9939]

Thank you very much!

[@TheAyrCaveShop]

Nice progress Yochol ! Great detail...Hopefully it will be done before another 2 years...Lol ATB....Dean

[@woodscreekworkshop9939]

Hopefully less than 2 years...

[@timcook3539]

Amazing work as always Yuchol, agreed the motor is a bastard to maneuver in and out!

[@woodscreekworkshop9939]

Appreciate it Tim.

[@HexenzirkelZuluhed]

You are indeed getting somewhere. Your nut turned out good.

[@woodscreekworkshop9939]

Thankks!

[@hanns9560]

Saludos cordiales desde Chile 🇨🇱

[@ryebis]

watching you work always makes me happy, great craftsmanship. I do question the choice of paint colour though, light colour / beige on a grinding machine is going to be hard to maintain.

[@woodscreekworkshop9939]

Heart wants what heart wants.😁

[@metalworksmachineshop]

love it.

[@woodscreekworkshop9939]

Thank you sir!

[@Warped65er]

Coming along very nice, thx for the vid.

[@woodscreekworkshop9939]

Thanks 👍

[@AmateurRedneckWorkshop]

Looking good there Yuchol. Thanks for the video keep on keeping on.

[@woodscreekworkshop9939]

Thanks for the encouragement Harold.

[@joell439]

I can see the light 💡

[@woodscreekworkshop9939]

Yes we can!

[@Cjarka_]

Hmm, fascinating, I learned at a similar grinder and we just moved the table by hand. All handles disengaged, we just grab the table and move it however fast we need. I can say the feel I get through table is amazing and when it comes to precise movements, we do those with stops that screw in and out for fine tuning. I always say there is no right way to do something, just some ways are more right than other.

[@woodscreekworkshop9939]

Good philosophy!

[@chronokoks]

Heh you're still way too gentle with the precision stones. C'mon, they can take on more dynamics :D I've been using them for 4 years and they can take a *soft beating :)

[@devmeistersuperprecision4155]

Good score on the hairig air spindle. What color did you paint this thing?

[@HM-Projects]

Nice video and great viewing as usual. Curious, what's your day job and how big is your shop ? Perhaps you've done a AMA / shop tour before and I can't find it ?

[@CantKillMe]

nice job was wondring if you will ever get it back to working again but it looks like you will soon I hope

[@woodscreekworkshop9939]

Not giving up this far.😏

[@stevengehm1287]

".....other machine we're not talking about..."🤣🤣🤣

[@harlech2]

As soon as you finish, I will send you my address for you to send this to me! :P

[@woodscreekworkshop9939]

Deal!

[@averellrios4511]

😍 *Promo sm*

[@ixflqr]

Careful with that volume. It’s much louder than your voice. I found myself turning the volume up and down

[@woodscreekworkshop9939]

That's why they give you volume control, so you can adjust to your liking,

[@HM-Projects]

@@woodscreekworkshop9939 😂