NEW MAGPUL 12 round magazine for the Glock 26!!

[@JordanWinkler]

Didn't know about these. I will be picking a few up

[@ceemuneygangtwinn6346]

Jordan Winkler Were Can u get a glock on a sight

[@toddruch2744]

I have several of these, they work just fine, no differences from glock magazines.

[@excelerater]

these are nice but I already have a +2 ext on my G26 carry mag and my spare mag is a 15 rounder. The G26 is the best Subcompact for all around carry ,they can keep those 43s,43Xs and 48s

[@headknocker8999]

The G26 really is the best sub compact Glock out there.. I've had one before & went looking at all the new models & walked away with a Gen 4 G26 for $399..

[@Syrpens]

excelerater EXACTLY. The problem, or non-problem depending on how you look at it. Is that Glock has already topped themselves with their early designs. Everything that has come after is a downgrade in one way or another for not that much added benefit (Glock 19x, 43, 43x, 45, and 48 come to mind). It just baffles me that they’ve release 5 brand new standalone models within the past 3 years that are essentially pointless if you already own a Glock 17, 19, or 26.

[@pappaclutch3266]

Slow down there buds the 43 (original) does have some use. Say you have to dress nice for a wedding or church or maybe your in your basketball/swim shorts chilling, perhaps you want a slim tuckable gun or a ankle carry, maybe you want to carry a gun where it’s not allowed.. like a job site and have to dress professionally. The 26 for me fits 95% of anything I want to do but the 43 (original) does have some merits and it’s certainly not useless.

[@grubes6841]

where did you purchase they ext?

[@reynaldorivera7641]

@@headknocker8999 I just paid 388 for gen 5 version

[@burntsilverado]

I carry a g26. Have 2 factory 10 round mags, 1 factory 10 round with +2 baseplate, a 15 round mag, 17 round mag, and 33 round stick mag. I prefer factory glock mags Just for simple ease of mind.

[@hectorgomez7632]

burntsilverado this is the reason the g26 is my favorite gun. So many magazine options! I have the same setup basically.

[@hurricane4500]

Would you recommend this firearm for conceal carry

[@burntsilverado]

@@hurricane4500 definitely. Now though I've switched to carrying a Canik 9mm. Basically the same as Glock, but half the price

[@hurricane4500]

@@burntsilverado I'm going to look up the Cankik now.. Thank you so much.

[@lizwynaco2222]

Oh I like this info. News to me. You just pushed me to get a 26. I've been thinking on it. My usual carry is a 19 in winter..a ruger lcp in summer. This will make a great year round carry. .doubles the capacity of the 6 round lcp! Thanks!

[@headknocker8999]

Glock has been making +2 floorplates since the G18 was first produced in the mid 80s, I was putting +2 plates on a G26 as far back as 1993-1994..

[@Syrpens]

Headknocker yeah, magpul isn’t really inventing anything new here, but I’m sure they’re well functioning mags at a good price. If anything hopefully it’ll make Glock lower their mag prices a little bit.

[@junkersintutus4282]

@@Syrpens It's shorter than the Glock one...

[@MemphisMojo15s]

I put a 15 round magazine in my wife's G26 9mm. It feels nice and the extra length helps me hold the pistol better. Thanks for sharing this

[@chriswright2439]

He was breathing hard like he was unwrapping a jelly doughnut

[@chowmonkey2002]

You’re right 😂

[@jammyface3041]

Youre a mean little boy. Lol

[@JPascal61]

Why was that not hard to imagine?

[@Invisible-Man666]

Sausage fingers

[@Parahax420]

🤣 .....🎁 🍩

[@gunchief0811]

pierce grip extension +2 baseplate (very low profile) has been around for many years and they are very reliable and inexpensive. looks similar to ur new magpul 12+1 mag the O.G. glock mags tend to last and not.warp i prefer the glock factory mag then a +2 pierce grip extension and ur good to go with 13 rounds of 9mm.

[@stormthrush37]

OEM baseplates are an option, but Scherer and Pearce +2 extensions have been out there a long time too and look/feel a little better IMO. I used these for years on my G26 and never any issues with reliability. They also made it possible to solidly grip the gun with your pinky, too, unlike these which look a little short. To be fair, everyone's hand sizes are a little different, so YMMV and whatnot.

[@StivyIvy]

Magazine is shown at 2:08

[@irvan36mm]

Thanks.

[@BigLukeBih]

Mvp

[@ishatoncoppercab]

The real mvp

[@ZBusC]

Hero!

[@alvaro2338]

StivyIvy thx 😅

[@harrycallahan9733]

To me it's not whether you can load a fully loaded mag into the gun with slide closed, it's how much room is left in the mag after it's loaded to capacity. Like you said, when the mag is inserted into the gun, the top round will be depress down a bit by the slide. That means there must be some extra room left in the mag for it to function properly. I tried the PMAG 12 GL-9 magazine in March of 2017, around the same time you did. When the mag was loaded with 12 rounds, I absolutely could not push the top round down anymore, even for 1mm. Yes you could shove the mag into the gun and it'd latch, but that only meant that the plastic components were deformed and bent to accommodate. After I loaded the mag into my G26 like you did in the video, I pulled the slide back and chambered the gun, then I ejected the round to inspect. A groove had been gouged into the casing. This is not a true 12rd magazine. I returned it.

[@Theoneguythatdoes]

Same here, April 2022

[@guerian84]

Yes and there is resistance when pulling the slide to chamber a round I have the Glock plus 2 and it has no resistance and no messed up casing

[@wsnow555]

Why not just carry a Glock 19 mag in case of an emergency. The 10 round is perfect for carrying.

[@JaxsynBunker]

Roger P yes. the glock 26 is exponentially smaller as it is a sub compact. a G19 is longer in height and length.

[@dxmanforlife]

@@JaxsynBunker he said the mag not the gun

[@Lovell93]

Glock 19 is my EDC but sometimes I carry the 26. Both great guns, but if you're gonna put a mag extension on a 26, you may as well just carry the 19.

[@charlesdavis9529]

I agree the 10 rounder is best for this gun I assume if you have this Conceal ability is priority and nothing makes this more concealable than a 10 round mag not to mention the reliably g17 magazine for a back up mag is probably your best bet as well

[@MybeautifulandamazingPrincess]

@@Lovell93 But if you carry a G19 you'll lose the convenience of having the option of using a flush mag or a bigger mag. I myself carry a G19 though

[@jjacksonjr2]

I have been researching ways to increase mag capacity while not going broke. I had no idea that these were out there. Thanks for share this. I know that I'm years late oh well!! Just now purchasing my first glock.

[@DavidLLambertmobile]

To be 💯 secure, I'd suggest only using OEM Glock mags: ccw, defense, police duty 🚔. I own & use a few Magpul 9mm Glock types: Glock 26, 15rd 9mm, 17rd 9mm. They feed & cycle about 98% of the time. Regular 9mm ammunition.

[@whiskeydrinker24]

I like the Magpul Glock magazines, I own some Magpul Glock 17 mags, but for me I use them for training and I carry factory mags. I have had no issues with them and I'm sure they would be fine, I just feel more comfortable carrying factory. You can buy a pile of them for pretty cheap for training mags though.

[@JP-lq7wi]

Lot of praise for a completely untested magazine. There is a reason Glock started metal lining their mags, I have two original unlined mags that came with my first Glock. The longer they sit fully loaded the more they swell, lol. I have tried several of the mag extensions on the 26 and have had a cheap one pop off while firing and dump the mag. The ets mag I tried didn’t function well with any extensions even the factory Glock one. Had to file the sharp edge off the Pearce grip not to pinch and cut skin. When Glock factory mags with extensions became readily available for around 30 bucks it was a no brainer. I have 2 magpuls for the Glock 19 and they are “good” but unless you are buying them by the dozen, pay the extra for a “great” factory magazine.

[@JoeBlow-cw4pu]

This is the problem with ALL G26's. Look where your ring finger is,.....directly on top of the last finger groove hump. People say it's a 2 finger grip....it's not even that...it's 1.5. Just get a G19 mag with an X-grip sleeve. 15 rounds baby!

[@Billfish57]

I like the +2 base plate way better because when drawing the weapon, I can pull it out of the holster way easier with that extra inch on the grip, I can shoot fine without that extra grip length but for reaching, grabbing and pulling out my gun fast, fast, fast, every time, I need that extra length. When seconds count, often tenths of a second count a lot, and that grip extending is necessary for drawing my gun in about half the time of stock or this aftermarket mag you have here. When I reach for a second magazine, I want a big increase in round count, sometimes going right to the 33, and that is what makes the G26 the best canceled carry gun around, still. BTW, that 33 stick will fit in my blue jean front pocket no problem, and when using it, I don't let me pinky touch it, I shoot with just the two finger grip, you shouldn't cock that long magazine at all when firing, just let it hang there and don't press on it, just to be sure of proper feeding.

[@davidbonner6979]

I carry the G26 with a 15 round magazine from GLOC. Being a subcompact, I found the out of box gun left my pinky finger sorta hanging off the bottom of the grip. And I have a smaller hand. The 15 round magazines, IF you can find them, work perfect for my hand now. All the while maintaining a perfect fit for my conceal carry holster.

[@kirmitchavez6252]

Never seen those before. I love my glock 26 I have the glock 12 round mag. Very cool, love your videos H4T!!!

[@humans4targets2]

Thanks!

[@Renaldo135]

I have a bunch of magpul mags I bought for my G17 when I thought Hillary was going to win along with Mecgar CZ aftermarket mags and they all have worked very well on the range with no problems at all.

[@philip5798]

Makes the gun look a lot better too!

[@jrglock34]

It would be GREAT to have a (12) round mag for the Glock 26 and still have the ability to use a GAP floor plate!

[@GlennFricke]

PMAG is my everyday carry magazine in my G26. No discernable added length and extra 2 rounds, hard to beat

[@glockgaston2922]

Paul really good information thanks for sharing and it's still that nice small size for CCW looks like a winner

[@fattboyzz1355]

I would rather just add on a +2 Glock extension . Then I would still have the factory mag reliability :)

[@protegedaridah3087]

Joseph Anthony what about the spring?

[@fattboyzz1355]

protege da ridah the g26 and the g19 use the same factory mag. spring , so it should be fine :)

[@protegedaridah3087]

Excellent

[@joshuatrtmann192]

Glock 27 40cal mags will hold 12 rounds of 9mm

[@anthonyn.3575]

I would think using 9mm rounds in a .40 magazine would cause feeding issues, due to the wider feed lips on the .40 magazines...more prone to causing double feeds, no?

[@bbmw9029]

You're still active on KZbin, so you may actually see this. It's now years later. Did the magazine prove reliable, and how has it held up. An update would be appreciated.

[@williejr71williams22]

I love this name!!! Much better than Humans for Targets....positive evolution! Good job brother!!!

[@82luft49]

Hmm. If you're still inclined to use the longer Glock 12 rd. mag extention, you might as well stick with G19. They both print the same. Now this Magpul 12 rd. seems like a better idea.

[@Bandionaire]

It actually make the gun look better for some odd reason to me 🤦🏾‍♂️😂

[@chef9524]

It’s slightly longer so it kinda evens the length of the slide/barrel and the grip.

[@andrewbryson3505]

me 2 bru

[@ShadyGMA]

Chauncey McArthur nah it definitely looks more even, better filled out. Looks a lot better

[@kenhutcherson5639]

I loved how they look so much I was scared to test them because I didn’t want them to fail. They didn’t!! It is all about the change in ratio and the cool look of mag stripping finger rests on the sides of the baseplate.

[@meangene4038]

Have you tried Pearce +2 extension for G-26? It's the same length as the Magpul, but uses the reliability of the Glock mag. And, it looks better, IMO. They have the same front strap grip texture and was designed to look like Glock had made it. Part # PG-2733

[@thegreenman2030]

Unfortunately I've had and have seen too many failures in Glocks using the Magpul GL9 mags. In one steel competition this past October I had 2 failures from two different p mags in my G17 and two other teammates had at least one each both using Pmags that they opened that day in their G19's. I recommend these as well as ETS for non essential activities especially training where your dropping mags on the ground like crazy but to keep me and my family alive and breathing I'm sticking with Glock Factory mags that can easily be found brand new for $19.99 each. Good review thanks for sharing.

[@geraldmattson4554]

The Green Man I've had zero luck with the PMags for my G19. For the price it was worth testing them out, but they were junk overall.

[@ES44AC-2]

I'm going to have to get some of these for my G26 Gen 4. Thanks for the review!

[@headknocker8999]

Me Too!!

[@princeofpickles9765]

Me three🤪

[@DavidLLambertmobile]

Note, if you have a newer model gen 5 era Glock 26 9x19mm the older style Magpul Glock 26 mag may not be 💯 . Magpul states the magazine is meant for Glock gen 1-4. I own a Magpul magazine & it shoots, cycles, feeds fine about 96% of the time. With common factory 9mm rounds: JHP, FMJ.

[@nobadimes]

Just wanted to add to your gravity test if you drop a 10lb ball an a 5lb ball at the same time they fall at the same rate Meaning they both hit the ground at the same time Thank you

[@12GaugePadawan]

Can you do an update video on how the Magpul performs on the range, in class, etc.? The Magpul 15 round mags had some teething issues.

[@chrisharper9175]

These fail way too much! Don’t trust these for EDC

[@mikehenderson54]

So how did it fire when you went to the range? I've seen another KZbin that had a lot of issues and jams, over 50% with his Glock 26 Gen 5.

[@Dutch_Prepper]

That's frame has one of the best looking stippling jobs I have ever seen !

[@Rossmosis]

It's not a stipple job, it's a talongrip.

[@robertfreeman3013]

The theoretical force known as gravity has no bearing on how the magazine falls out of the gun. The mass and weight of it does. That’s why the aftermarket mag seems to hold up a tad longer, it’s lighter in weight as you noted.

[@garyh5225]

Fellow FE?

[@DavidLLambertmobile]

early Glock magpul mags had major problems. Glockers & 3 gun guys blamed the lack of a traditional Glock magazine steel liner. I plan to buy a new gen 5 soon & want to see if the magpul will function correctly.

[@watertiger33]

They don't. I have a Glock 19 Gen 5 and used it with Magpul mags purchased earlier this year. Junk. Use them for practice, but I had more luck with $7 KCI mags. They were not the quality I expected from Magpul

[@danegeruss4153]

My favorite handgun aside from a colt 45 single action army The Glock 26 is awesome.

[@wcdjmase]

awesome, it looks like it sticks out less than the factory 12 rounders and doesn't sound like it rattles like the glock ones do.

[@TakeDetour]

I would simply recommend the UPLULA Magazine loader. You have a great Firearm for concealed carry.

[@1AbominAble1]

Pretty nice. Now you're only 2 rds under a G19 mag in an easy to carry set up, not that a 19 isn't easy to carry, but, nice just the same. The mag looks nice and I like how it fits the bottom of the grip. I run Glock 2rd extensions on my 27 so I can have 10+1 which gets me only 2 rds from the 23 mag capacity. It also allows me to get my little finger on the extension since my XL hands aren't as muscular as your meat hooks. I hope that they make a G27 version soon, picking up a magpul mag will be way cheaper than a Glock factory mag and then springing for an extension.

[@flyingplumber226]

I ordered one of these and it came yesterday. I love it. I wasn't sure I would because I'm not a fan of the Pearce. But the magpul is designed and shaped differently. It is hardly any longer then the factory 10. Only complaint I have is the spring is super tough. It was so hard to get the 12th round in, I swore I was gonna blow the bottom plate out. I left 11 in it and am going to check today when I'm home from work if it softened up any. The 12th round went way easier into yours. I have very strong hands and fingers as I'm a plumber and use my hands all day long with 24" pipe wrenches. I'm worried if mine might be defective somehow. I was able to chamber a round with all 12 in it.

[@flyingplumber226]

When I returned home today the 12th round went in with much less resistance. Still difficult but not unrealistic like when I tried yesterday. I guess compressing the spring for 24 hrs was enough to break it in a little.

[@-bdl2696]

I grabbed 4 of these here in Cali during "Freedom Week" lol ty Benitez!

[@johnniewasr5740]

You used freedom week to buy mags with +2 rounds more than usual?

[@-bdl2696]

Tactical Tacos you’re question infers I shouldn’t have? Perhaps you’re thinking that’s ALL I got, in which case you’d be mistaken. But having higher capacity mags for a subcompact handgun without having a big mag sticking out of the grip is something I find very useful.

[@gehtdianschasau8372]

You can't possibly get those extra rounds for free. I guess the spring will tire out much, much sooner. Handguns develope, when it originally had a feature, that was changed later on, that usually means that they improoved it. So more metal in the Magazine is most likely better. Glock uses polymer where it makes sence, they tried with the mag but changed. later on. I don't really like the Looks of it, but it's for conceald carry, so i is technically less important.

[@drillmovement4795]

Not sure if adding 2 rounds but reducing reliability is worth it. 10+1 is plenty especially when a spare G19 mag in the pocket.

[@gadsdenjim8785]

The Magpul and ETS glock mags have been proven reliable. They're not like all the other cheap glock mags out there.

[@DavidLLambertmobile]

+Gadsden Jim not fully true. early Glock type magpul designs had customer complaints. as noted in the video, magpul does not use a metal liner like Glock factory style. some cops & armed users only shoot glock/magpuls in training not duty or personal defense.

[@joemiester31]

I agree. I have 2 ets fun sticks because I have a g19 and a g19x. They are fun for the range and have never once even had a hiccup BBBBUUUUTTTTT I would never trust my life to them like I would a good old fashioned Glock mag.

[@VK-dh3mv]

Well in CA....just get factory mags and it's pointless to use a g19 mag in a g26 as they are all 10 rounds.

[@Niteowler]

Would like to see a follow up video on the functionality of the mag. The ammo and mag both loaded pretty tight.

[@markcampos6267]

Why not with your left thum hold the rim of the round down to help loaed the next one in ??

[@gabbyhayes1568]

Extra length to the magazine is not a detriment to the Glock 26. To the contrary, it adds stability when gripping the pistol. I added Pearce grip extensions to all my factory magazines for this pistol because I didn't like my pinky finger just dangling in the air. Plus, it allows you to run factory mags. If I want more capacity, I'll buy Glock 17 mags.

[@Trenchant463]

For me the 10 round OEM mag is perfect - I don't want the grip even a smidge longer. Seriously do not need pinky extension. I think the G26 Gen 5 is as smooth and balanced as my 19 Gen 5.

[@Vernonu9]

12rnd Magpul caused a malfunction already, so I don't use them for concealed carry, but for practice is fine.

[@wsalas13]

What type of malfunction?

[@Vernonu9]

@@wsalas13 FTF

[@PerceptionVsReality333]

10+1 is adequate for CCW so many people act like they're going to get into a shootout with dozens of bad guys like in action movies.

[@oldcop18]

Informative but did it shoot absent any malfunctions?

[@MichoTheMusicMan]

Great vid 👍🏼 just picked up a 26 gen3 will this mag work?

[@gagunshooting803]

very compact...I have the Pearce G-39 +3 on my Glock 26 mag's but can only get +2 in them...they are a bit longer than the Magpul...but I prefer having the factory metal lining. Great review

[@danahall1575]

Good review. Thanks man!

[@headknocker8999]

I wanna try some of these but there are none to be had FTF Will be ordering some soon enough on the internet for $12ea BTW Just picked up a G26 Gen 4 last Friday for $399

[@daddybeagleaz907]

Planning to order two for a start, this helped me decide to proceed. Thanks for the review!!

[@LiveFreeOrRIP]

I hear people having issues with magpul mags. I forget who but hes claims to have 5000 rounds and no issues with his 19 until he got a few magpul mags. Hes a pretty good source too knows his stuff.

[@jeffadams9807]

1) WHY Not Get A +2 or +3 Mag Extension, For Ur Glock 26 Mag ??? 2) WHY Not Use A G19 Mag With An XGRIP, In Ur G26 ???

[@gungeek4230]

Magpuls malfunction with gen 5 because of the ambidextrous slide ✊🏿

[@UncleDanBand64]

Poe Performance did a torture test on these and had great results. I have 15, 17 & 21 round Magpul mags and they have been 100%. What has your experience been so far? Good video by the way. Glad I found your channel 👍🇺🇸

[@thomasvess6253]

I've got a pmag for my G26 and it makes all the difference in the world.. It's hard to explain how different it feels now I use the factory ten round mag for pocket carry but when I get home I now use the pmag instead of one of my 15rd G19 mags. I traded for this G26 and some mags including the pmag and am glad I did the pmag would be worth the investment I believe anyway that's my $.02. good video buddy...

[@scrapguy6816]

Glock has had the 12 round magazine for a long time. Magpul just came out with them. I have some of them for my Glock 19 and my Keltec sub 2000 second generation Glock 19 configuration. They work flawlessly. Magpul anything is well made and very reliable.

[@rugrt1]

I just put the pierce plus 2 pinkeye extension on mine

[@SAVAGE308SNIPER]

"High-capacity" mags are now legal in California for the time being!!! Yea!

[@johnnymnemonic6986]

Really? when did this occur, I'm in San Fran. Are stores selling them? will websites send them to Cali now?

[@SAVAGE308SNIPER]

@@johnnymnemonic6986 The law lasted for a week. We cant order them anymore. But whatever we bought during when it was legal are legal to keep for now. I ordered some online and some at local gun shops.

[@trevorvolcom7]

@@SAVAGE308SNIPER Seems like you're on top of your game and are the type of gun owner I want to see in California. Congratulations on being grandfathered in with those mags. Enjoy your freedom!

[@trevorvolcom7]

@@johnnymnemonic6986 Seems like you missed the biggest opportunity a California gun owner will ever have.. what a shame.

[@sabersix4289]

I just run a factory original g19 mag with an xspace spacer. My back up mag is a g17 mag with an xspace spacer. I get 32 rounds. I used to run two spare mags and a g23...I don't think i am going to be getting into too many gunfights and i figure that one spare mag or 33 rounds total should be enough to take care of one or two assailants or to break contact. The 26 with the 19 mag in it is still shorter from mag to top of slide than a g19. Or i just carry my g19 with a g17 reload...

[@sly2792004]

The idea is if a mag fails you drop it and get one of your spares and if it fails you still have another.. We carry for the slim chance of being attacked, doesn't seem like a stretch to plan for other slim chances, like mag failure or prolonged defense situation, like the post hurricane looting happening in Texas. 19 with 2 17 mags is my carry.

[@TakeDetour]

The extra capacity is great. Most Folks never will do a tactical reload under stress. Your first Magazine will be it. I'd rather have the two extra Rounds. I would have like to have seen you load a Round in the Chamber and then topped off that Magazine but oh well.

[@xj53pq7]

Personally I think its way too stiff fully loaded. It makes loading the mag on a closed slide more difficult to do reliably, and it makes me wonder how well the second round is going to feed in a 12+1 capacity. Will the extreme pressure of the round on the feed lips slow the slide down to an unreliable speed? One pro that I have found is that the extended gripping surfaces makes drawing from concealment much easier.

[@flyingplumber226]

Tyler Clark if you leave yours fully loaded, has it seemed to break the spring in some? Mine got much easier after leaving it loaded for 24 hrs. Still kinda hard but not near as bad as it was from new. H4T's seemed to load much easier then mine from new.

[@PinGorilla]

I have this issue with the Magpul 12 rd mag in my G26. I can't even rack the slide when fully loaded. And the slide sticks when it cycles.

[@flyingplumber226]

PinGorilla mine runs flawlessly. I only have one tho.

[@Framer_Mike]

Tyler Clark same as my M&P c.

[@GunCollector007]

Looks great. Too bad I'm only allowed 10 rounds in my wonderful State! Lol.

[@robertkern842]

Glock has had the plus 2 round magazines out for some time. It's just new for magpul.

[@nicholaslevesque9977]

Mass? That's where I'm at man. Lame

[@HatsaninPanama]

Would you use them only at the gun range or would you trust them sufficinetly to use them along with the rest of your EDC gear?

[@deepiper6529]

I picked up one of the Magpul 17 round Glock mags at Academy here last weekend. I have a couple of the Glock 12 round mags for the 26. I am going to pick up a few of the Magpul 12 rounders now.

[@DrWatch-fq3tf]

Doesn't Glock make a factory 12 round mag?

[@DeathxThexKid100]

Technically, but it uses a 10 round mag with the oem extended baseplate, which those are rather bulky. I personally think there's no reason to add extra rounds to only have the downside of less conceal ability. The same goes for the pinky extension. If you're adding a baseplate/pinky extension, just carry a glock 19. With the 19 you get an extra 3 rounds for barely any additional length at the rate your destroying your 26's ability to be concealed. Otherwise, stick to the 10 round mag as is and get a glock 17 mag as a carry backup.

[@pi5tolpete989]

Agreed.. No sloutch

[@StylesBlender]

“Gravity is gonna take effect and do its part” wrong, everything falls at the same rate. Drop an empty water bottle and a full one at the same time. The will hit the floor at the same time.

[@Enviiiih]

Love that 26 🔥🔥🔥

[@northpolegs6201]

MCMLXXX VII IX relax hotshot

[@galamonkey]

Worth a try, but I've heard plenty of reports about Magpul Glock mags not functioning reliably. I bought a 15rd one for my G19 to try out. We will see. I just purchased one to see if the reports of unreliability are true.

[@flyingplumber226]

galamonkey I have 17, 15 and now 12 round magpul mags. Mine have a production date of Jan. 2016 or newer. I haven't shot this new one for the G26 yet but my others all run flawlessly. Never had a single problem from any of them. I have 6 or maybe more with hundreds of rounds thru each and not a single issue. The only thing I do notice is the feed lips have worn slightly on the inside of the mag. Not bad but slightly. Eventually this is where the mag will fail. Being all plastic eventually they will break or wear away. But eventually all things break. Nothing lasts forever. For the price these mags can't be beat. I purchased some of mine for as low as $10.

[@yqwgjsg]

galamonkey MagPul discovered a problem right after they shipped the original G19 mags during their rollout. They reported it to the public and offered to replace them all. I have 100's of rounds out of my MagPul G19 mags without a malfunction. I think the reports of problems are still floating around from the old mags.

[@WeAreNotAlone69]

Hammer0f Thor Q: Is Magpul issuing a PRE-PAID SHIPPING LABEL, IE coughing up cost to mail DEFECTIVE PRODUCT back ? Addtionally for Magpul mags that have cracked such as Gen2 AR mags, are they doing the same ?

[@brent338]

just got 3, New carry. Makes the 26 feel almost like the 36, but 2x rnd count. 13, 147 hst, hard to beat, and I'm a 10mm/.357 Sig fan. but going back 2 9mm for edc.

[@Willis2515]

You need an UpLULA my friend

[@danielrodriguez5463]

Guys, thats how to NOT open your packages!

[@KudoYoung]

Own a 43. This is on my radar for next gun.

[@DesertPlinker]

Thanks for putting this up...I have a few of these but haven't had the chance to use them yet...looking at going back to my 26 as my carry gun.

[@robertpsotka3525]

Get the Pearce mag extension for standard 10 round mag

[@skankhunt-vw8xr]

I have a 15 rounder that isn't metal lined and the bullets will all shoot out if it's dropped so I never use it. Even banging it on my wrist like you did would throw at the bullets right out. That mag seems tight. Try dropping it and see if the ammo stays in the mag. Mine was an after market during the Brady Bill.

[@SharkByteOfficial]

Big dot sights on a G26 with a tasteful grip and a 12 capacity... we got the same thinking lol

[@Blockhead_teda]

I put a Glock spring in mine just to be on the safe side lol

[@elblancobasura]

Thanks for the video. I've been curious about these 12 round 26 Pmags. The G-17 Pmags I have are working just fine. Love me some G-26!!!

[@mustardman5366]

If you didnt need a grip extension, why did you have one on the other mag? I dont understand..

[@christofferlunoe1305]

This is just awesome...thanks for the video !

[@SplitHairz]

Nice additions for Glocks. Hey when can we expect a RANT video? You were good at those :-)

[@garyblevins1428]

If you can't get it done with 11. You won't get it done with 13

[@joelthe4th]

"Now the original mag is going to fall better out of the gun, I believe, just for the fact that there's more weight... But any time you have more weight, of course, something, gravity's going to take effect and do it's part." Interesting take on physics there. I wonder if Aristotle, Galileo, and Newton would take umbrage with your assertions.

[@ILruffian]

They might, but Leo DaVinci might agree with him. This is more than a straight projectile motion problem. While increased mass will not cause the mag to fall faster, it can definitely help overcome any static friction between the mag and magwell that may be holding the mag in place. Taken with the fact that he said that the mag would fall "better" and not "faster," I think that he gets a pass on this one.

[@kashman2426]

Are you for real with this take. Do you get the gist? I am assuming so. No need to be an ass

[@ILruffian]

I get that someone made a post demeaning to the video creator, implying that he does not understand basic physics (because all objects fall at the same rate regardless of mass). And yet, what the video creator said could very well be correct, as the above does not hold true until the mag no longer has contact with any part of the mag well. If I'm being an ass for defending the guy against an unjust insult of his intelligence, so be it.

[@sweetcostarica]

So 2 more rounds in a magazine ("no brainier", "boost") means?? - a 10 round mag. is not enough?? - will 13 rounds make a difference?? - is a 5, 6, or 7 round revolver is inadequate?? - will you fire 5, 6, 10, 12, rounds in a handgun for self defense, legally?? Bottom line is the "extra rounds" for practice is fine, but in actual real life shooting *the 1st two or three rounds are the most effective* in self defense incidents according to street data. What the main purpose of +1, +2, or more mag. extension (with their spring problems) is to make more money for the gun industry, period. Sorry, but that is the facts.

[@princeofpickles9765]

sweetcostarica...😪

[@WeAreNotAlone69]

NO STEEL LINER in a PLASTIC MAGAZINE is stupid. Yep these Magpuls are cheaper in short term but LONG TERM they are NOT going to last as long as a steel lined magazine.

[@EthEdr]

Didn't even know about these. Very cool thanks for sharing.

[@communityprepper6153]

my next ccw pistol with the 12 round mag! Take my money Glock!

[@NxCmp]

Nice defense load choice. What I carry as well

[@thomasharris7702]

The only way you could get more capacity out of that small thing is to have a triple stack mag haha