New Massive X Expansions Walkthrough (+Ignition Code)

[@Bigfamilyhomestead]

I see Jef. I click. Never disappointing. Nuff said.

[@jefgibbons]

Ahh thanks... I wasn't at my full capacities on this one, so I'm glad it helped!

[@intuitivecat]

Some of the best tutorials I’ve seen; high quality and clarity in the presentation and production.

[@GeorgeHzMusic]

Jeff you’re the master of Maschine! (And of all NI as well). Greate vids!

[@jefgibbons]

Thanks George!

[@kieroneil]

I have been considering Massive X because there is a sale now. Thanks for doing this.

[@thepianomandan]

Once again. Another great tutorial. So many thanks Jef.

[@jefgibbons]

Thanks for the support Dan!

[@iambricko]

Hi Jef, came to you looking for Cubase tutorials and wasn’t disappointed. I love your content, super high quality and always put together so well. I aways manage to take away something new from all you stuff - keep up the great work!

[@jefgibbons]

Thanks Bricko!

[@Talib23401]

Prof G dropping knowledge as usual

[@jefgibbons]

Yes... might need to use that name!

[@florinmeica141]

Hi Jef. Hope you are well. Nice video. Can you do a video with a premastering or mastering, on Maschine NI please ?

[@nastynate9529]

Been using Serum and Massive for quite some time, and have amassed an eclectic selection of presets for both. Despite the fear of having to learn another wavetable synth interface I am seriously considering buying this sale simply for the presets included, and the potential of having a modern vsti for the future. Good walkthrough, Appreciate it a lot.

[@k_t_a66]

@ Jef Very nice video :) I have used Maschine for 4 years now and if you haven't saved you can indeed undo things. So it is not correct that you say it's not able to undo mistakes.

[@jefgibbons]

Thanks Kristian! I was referring to Massive when I said that, you can try it yourself, move any parameter in Massive X, then try undoing it... it doesn't work. Maschine is definitely able to undo any of it's own native things for sure!

[@philippecamus6391]

I tested the expansions you show, and boffff.... I watch your vidéo and whouaaaa. You are a very good demonstrator and musician Jef.

[@jefgibbons]

Thanks spy much Philippe, glad it helped!

[@YassDavid]

great vid...idk I seem to have more questions after, your very knowledgeable. wish I could dig your mind.

[@chris5375]

Great Performance 👍🏻

[@jtgrekordz5753]

Hi Jeff......as always you have great and very informative videos... My question for you is have you made tutorials for the Maschine jam and how often do you incorporate Jam into your workflows? Thanks

[@ErikJMalm]

Another good walkthrough, Inspiring . . . as usual, I really like it!

[@jefgibbons]

Thanks Erik!

[@electrosquash6706]

Thx, Jeff! Performer Video -> YES! Ambient stuff -> YES!

[@jefgibbons]

Thanks Electrosquash! I have them in the queue!

[@robertshamansky1912]

Steam pipe? Awesome demo! I really like these patches!

[@sedetweiler]

Love your setup! What are you using for your main display there? I am a full-time photographer and I am always looking for a larger display that might work well with a great resolution.

[@meBrokenBody]

Just bought a preset pack for Serum yesterday that makes this one sound so-so. It's not bad, but there is better elsewhere. However, I really like the performers!! That is a great addition!

[@jefgibbons]

Thanks Eric! The performers are amazing... looking forward to digging into those. Which preset pack did you get for Serum? It's been out for so long, the preset packs for Serum can be quite spectacular! (I have many myself)

[@meBrokenBody]

@@jefgibbons It's Titan-2 XFER presets by Resonance Sound (kzbin.info/www/bejne/hIG9koudmcyjatk). Actually it's not very recent, but I found that it had many good presets that I could use in various situations. Have to admit I thought it was more recent, but at the time I didn't have Serum.

[@Dettol68]

Jef, have you ever put out a video to show how you use the Maschine Jam with the Maschine itself?

[@vznquest]

waiting for that one too!

[@biggdre337]

What monitor is that?

[@lavrodem]

How to open maschine 2 massive x window: / everything ok sounds but I can't open the massive x window: /

[@GeneralTeflonJohn]

Hey Jeff! I notice you have a Machine Jam. Does that work with the MK3? Also, do you have any videos on the Machine Jam?

[@djsugarbear6079]

Can’t wait for the futures on how to further modify performers to create your own grooves.... always great info! Gracias!

[@maus3454]

Hi Jeff. Many thanks for this video. Great as always 👍

[@jefgibbons]

Thanks Maus!

[@tinotaylor]

Nice video jef. Loving the content. Where did you get the wood stand for your maschine ?

[@pentapandamusic]

Hi Jef, if I already have the komplete keyboard which already has the browser LED screen, do you think I should buy the Maschine or I should save some money to just buy the Maschine Mikro?

[@jefgibbons]

I highly recommend maschine if you plan to do a lot of sampling. The screens are amazing for that!

[@pentapandamusic]

@@jefgibbons Gotcha, I ended up just picking up the Maschine at our local store, sorry didn't get it through your affliate link coz I was so hyped to get it ASAP, now I need a 2TB SSD LOL for the ultimate CE...

[@kielhall8363]

Jef thank you wow millions of sound design possibilities 🔊🔊🔊🔊🔊

[@jefgibbons]

Almost overwhelming isn't it!

[@tjosselin]

Thanks Jef, really useful !-) I have a Komplete S61 keyboard. Is there a way to see the “orange light” functions, without having to move the entire keyboard to C-3 ? Something like a split keyboard function perhaps

[@jefgibbons]

Not that I know of, you mean in Maschine right?

[@tjosselin]

@@jefgibbons no in The Komplete software

[@michafortuna73]

Thanks again Jef, great stuff and work. I love the second track (the bomb) you created, when do you release it? :-) Grettings from Düsseldorf Germany

[@koenvanlishout1106]

Hi Jeff, do these Massive X expansions also come with playable patterns like the Maschine expansions (or is it only sound presets...?). The Massive X expansions are demoed on the NI website with some nice (1 to 6) patterns so I was wondering if they come included with each expansion...? Thx in advance for clearing that up for me!

[@tobiasfenkart1992]

Is there a way to synchronise the Performer to the used DAW?

[@souldja81]

Rush is just so good!

[@vervone]

Hi. I learn a lot from the videos that you create. I would love for you to do a video on how to use the Maschine sounds in Logic Pro. Thank you!

[@PavanSibal]

Great video Jeff. The last patch was from Rush. Correct? Looking forward to some sound design tutorial in MassiveX.

[@enzoferrera8178]

Great video! I've been waiting for them to do more with Massive X since I bought it. I wonder though since I already own Massive X is there an offer for current owners or am I S.O.L?

[@peppyp7323]

sale now, on expansions, until may 7

[@blueberry2a]

hello jeff the patch you used called about five (17m30s of your video) i got the library but it's definetly not the same pattern i got (no sliding uo)? how's that possible. Does that mean you made that sliding up stuff cause I aint got the same product very very very strange

[@jefgibbons]

Yes, I went and played around with the Performers. Just save your project as a different name, then go mess around with the performers! I hope to make a video on it, but not few a couple weeks...

[@blueberry2a]

@@jefgibbons Thks for your answer but most of all I want to take a little of my time just to say THANKS. Yes thanks for your youtube channel and. You know I use Mschine for almost 2 years so I was not a novice. Anyway I watched every single video you made about it. It s just really helpful with a the different tricks and method you use. I use a lot of synth hardware (moog elektron) and try to integrate my Mashine in different setup... its just unique. By the way I see you got a Mashine Jam too and i really wonder how you use it in your own setup. Keep on the good work and thanks again for your precious help . A French Fan

[@Dettol68]

Jeff great video’s - have you seen the browser in Factory from Sugar Bytes - on iPad and VST/AU - just amazing - best I have experienced

[@jefgibbons]

Thanks Stephen! I'll check that out for sure... such an important part of a good synth!

[@Kalapton]

Hey Jef Firstly thanks for all the info you are sharing , im now to producing and learning so much from you, i have an off topic question for maschine , is there a way to sample a track and then just extract the vocals with any of the native instrument vst's ? i see there is a few VST's online but they are around 200 euro and seeing as im not experienced its a bit pricey, your responce or maybe a video on it would be highly apprechiated.

[@garyusinger]

I have a Komplete Kontrol keyboard, but looked like you were using your mk3 the most.

[@Yadozer]

Hey Jef - I purchased Komplete 12 Ultimate a few months before Massive X was released, and received it via native access on its release date. Do you know if I can get these expansions for free?

[@jeremymartin7481]

Does Massive x come with Komplete 12?

[@garyusinger]

do you need to have Maschine mk3 or mikro to use these expansions?

[@royklerks1266]

great video jef

[@BoomBoom-ci8is]

Crazy!

[@volkeregger1024]

Hi Jeff, another great video from you. But, after buying these three expansions, I think, its a kind of "fast money-making" from NI. In my opinion only 10 % of this content is really interesting. A lot is extremely similar to each other. Often I had the feeling,"Mmh, heard it before". Its only a critic of the product, not of your fantastic work. Keep going!

[@BurntSquirrel]

Is that wooden Dock that your Maschine is in a custom build?

[@robertparenton7470]

Your video's are very helpful! I'm located in Frisco, TX. Are you located in Texas?

[@geertmaertens7372]

Hi Jef, I kind of dig your large screen setup on the wall. A few Q, I remember you had a video on this with some tweaks needed? Which screen? Do you have neck or back strain? The screen may take the place for possibilities of putting acoustic materials behind the monitors, is that a loss?

[@jefgibbons]

I've got a link to that video in the description above. The neck strain does affect me for sure, but it's just so great for my videos! I wouldn't necessarily recommend it for normal usage. I also have a big absorber right behind the TV, and I find the reflections off the tv are better than the concave thing I had going on with dual displays that were closer to me. Interesting hey?

[@geertmaertens7372]

@@jefgibbons Many thanks to take the time for this answer and link! 🤛

[@RoderickNunn]

Nicely done, Jeff. May I ask what monitor and computer you are using?

[@erickadolfocancinoaguilera495]

¡Hello! Mr. Jeff, my name is Erick, and I want to congratulate you on the great work you present in this video and in all the others. It is a great experience to watch his videos, he is a great presenter, and he shows his good education, he seems to me a person of great respect and admiration. Thank you very much for what you do for us, your followers, it really changed my vision about native instruments production instruments, specifically Maschine and Komplete. I just wanted to ask you in the most attentive and responsible way, would it be possible to create a video where I explained in depth the use of Maschine's "Drum Synths"? each of the instruments, it would be great if you had such a video. I appreciate your attention, the effort in your videos and the dedication to make them. You are the best. ¡thank you very much!.

[@jefgibbons]

Thanks Erick! Much appreciated! Thats a really good idea, and I'll put it in the queue!

[@Narinorth2]

Do I have to have massive x in order to use the massive expansions? Because I think I’ve made a bad decision buying it first smh 🤦🏾‍♂️

[@jefgibbons]

Shoot! Yes… massive x isn’t in the other expansions though. You should contact NI, they might refund you!

[@CEDiih]

Heii Jef, Hei Jef‘s community, a noob here! I‘m new at the maschine world and asket me, how can i put a FX on my track, chance it until the track goes on and record that chancing FX. Do anybody understand what i mean? 😅

[@Yadozer]

If I understand you correctly, I believe the easiest way to achieve this is to automate your desired effect within the arrangement on your DAW.

[@domlucie9764]

Merci Jeff!

[@GOASTWRITTER]

NOOO why isn't standalone!

[@Boissinova]

First! Hey Jef! Hope you’re doing well with quarantine! 👋

[@Boissinova]

Also, if you HAD to pick, would you pick Arturia Pigments or Massive X?

[@wizmos74]

@@Boissinova Take Arturia in every way better

[@jefgibbons]

@@Boissinova Massive X if you're into musical sequences and adjusting them with keyswitches. Pigments for the simpler layout, and ability to import your own stuff into it... Both fantastic synths, do you have one of them already?

[@drne6244]

just crashes my ableton

[@jacksp8de]

You the man. You give me Massive Inspiration for my own youtube channel. See what I did there?😏

[@jefgibbons]

Freakin love it Jack! If I had a name like yours... do it! Get that channel going! I’ll be your biggest fan. There’s always room for more youtubers!!!

[@jacksp8de]

Jef Gibbons I wasn’t clear. I have had my channel for a while and I’m upgrading my studio at the moment. Seeing your channel is inspiration for me making improvements. Check it out if you get a chance. Thanks! kzbin.info/www/bejne/r5fdqKGlh6aNbbM

[@midisoul1]

Why do you not say we need machine ? To follow your tutorial

[@jefgibbons]

Almost everything in Massive X here is do-able in any other DAW except for the browser. I'll have more Massive X tutorials coming, and I'll try to be aware of when I'm doing something specific to Maschine.

[@prodbyjxff5724]

Bro you are really close to that big ass tv……

[@RoderickNunn]

Nicely done, Jeff. May I ask what monitor and computer you are using?

[@jefgibbons]

Check the description, I have a link!

[@RoderickNunn]

@@jefgibbons Got it. Missed that. Thx

[@jefgibbons]

No prob, it’s a common question!