New Milwaukee Tool TRIM SQUARE Can Replace Your OLD RAFTER SQUARES

New Milwaukee Tool TRIM SQUARE Can Replace Your OLD RAFTER SQUARES (MLSQ040) we talk about the features and benefits of the new trim square from Milwaukee Tool. Milwaukee claim it's the most versatile framing square on the market. You should replace your old speed square with this new trim square. Let us know your thoughts on this new trim square from Milwaukee Tools in the comments section below.

[@amoscardoza5253]

It does seem it would handy. I'm a big fan of the notches. Hope you gentalmen had a wonderful holiday!

[@VCGConstruction]

I like the notches as well cuz! Happy holidays to you and yours as well!!

[@Aepek]

Amos Cardoza Like notches too, very handy doing work

[@dianafertig2188]

Gotta have notches.

[@konamanstudio2447]

It is very useful I bought one as you carry around little bigger Square yes I keep all three of them in my toolbox but it's the one gets used the most you take care and cheers with a beer

[@konamanstudio2447]

@@Aepek cheers with a beer

[@samshim3149]

I'll wait for the Fuel version.

[@DrFearCo]

Fuel surge. More quiet.

[@OdinJB]

Lol

[@bryanliloli1041]

Lmao!!!😂

[@MitchellGWhitehead]

Fantastic

[@fookyu1621]

Yeah id hate to have to send in my square for new brushes

[@CarlosRodriguez-tn8yq]

Is it Brushless?

[@VCGConstruction]

Cordless

[@sumandl]

hahaha 😄

[@blakekuhlmann2143]

brushless, fast charge, ultra lightweight, M0 fuel performance, this baby is loaded

[@scorporsupremacy7948]

👍🏽...😂🤣😂

[@sawdustandsurvival]

Once I was carrying a speed square down the back of my jeans. I sat down and the thing totally violated me. I'd have been grateful for a couple of inches less penetration. They could use this as marketing?

[@brilliantvisuals6181]

🤣🤣🤣

[@JohnnyUmphress]

After seeing this video I made my 3 hour round trip to my nearest Home Depot and bought this square. I really think I'm going to love this square for trim work. Great product. I would have not known it was available if I hadn't seen it here first.

[@meagaindave2049]

The notches? I'm sold! Especially when cutting 1-3 inch rips of drywall 10-12 feet long! Too short to hold a razor knife and tape measure together. Chalk line is okay but takes so much time when working solo! The notch with a pencil (or maybe even with razor?) is huge! Slide it right along in no time. Thanks, Vince, hope your Christmas went great and God bless!😁👍✌

[@XxStratAttackxX]

I bought the square after watching this video. I like scribing notches and the quality of materials as well as the laser etched marks. but after a simple test to determine if it was really 90° it turns out that it's about 1/32 out of square over 4 inches which is a considerable amount of error for finish work. Especially considering that a speed square isn't adjustable like a combination square and it should be machined perfectly to 90°. I can't believe that a company as big as Milwaukee with such a reputation can't even deliver an accurate tool.

[@cbdfpv]

Vince I got that square when it first came out 💪🏽 fits perfectly in my tool bags and not big and bulky. Plus has different measurements as a electrician I love it.

[@Bradkurily]

This is my go to when I’m doing tight quarters marking and trim. I even love having the keychain measuring tape handy. Imperial and metic not too bad. Thanks for the work you put in to this. Happy holidays.

[@michaeldahm214]

Loved the “dead pan” aluminum/aluminium joke. Very good.

[@VCGConstruction]

🤣🤣👍🏻

[@WEALRO]

I like the edge that wraps board can be used to mark a 1/4 or 3/8 on the side of lumber also , great job Vince 👍 always a great video

[@landonm11]

I love mine. It fits perfect in a tool belt pouch. Just dang handy!

[@joaquinalvarez8202]

Great videos man, I like the positive attitude and it does seem you enjoy what you do which if just great. Best wishes and keep the great work.

[@eastade]

I definitely see the appeal. Especially for trim work, as intended. I really like the 'dual reference heel' for reveals when casing windows and doors. It could replace the combo square for me in that circumstance for sure.

[@relativelynomadic]

I picked this up because my square lives in my back pocket and is always falling out, this is perfect

[@jeffparker360]

I picked one up because of this video. Thanks for the review!

[@soma7040]

vince you are a beast!! happy holidays brother! thanks for all the help!

[@VCGConstruction]

Happy Holidays to you and yours Soma!

[@chancecarlton8403]

I've been using this along with the 7inch for awhile now. Mostly using it on sunrooms, it fits nicely in the tracks and they are only 3.25 inch thick walls. Use it to get into tight spaces and even with the 7 to transfer lines. It's not a replacement to the 7 but a supplement for me and I love it.

[@spanzek]

Great video Vince! I just picked up one of those trims squares at my local Home Depot. Seems versatile enough but the compact size is what really makes it a hit. The larger one is always getting caught on something in tight spaces. Plus love the red color!! Can't lose that on the job, but someone might snag it from you!!

[@justinedwards1861]

I love it being a plumber I can mark studs on exterior walls that are sheared. And it fits in hoodie pocket as well as back pocket. All I use now.

[@mariacarneglia8483]

Hope you are all having a great evening! Great job VCG, keep up the good work!👍🧰👍

[@randymathews3348]

I like it, the offset heel is great for casing reveals. Fits well in my back pocket too

[@begpard]

Omg!! Using my speed square to ensure I have square cuts...I wish I thought of that!! I am most definitely using that for sure

[@grantbyrwa3992]

I love this for off-road fab it’s my favorite

[@rodw]

I agree totally Vince. What I like most is the contrast, you can clearly see the numbers. I've noticed that lately most of them are the same color.. I've seen green, Orange, silver and grey. Stanley has one that is nice black with yellow numbers. Very visible !!! This was a fun short video. With all the fuss over power tools, we overlook the basic tools sometimes. Thanks Vince !! I hope you had a great Christmas and look forward to a great 2020, Happy New Year my Friends and all of the VCG !!! Rodney

[@VCGConstruction]

I have the Stanley Rodney and I really like that one as well!

[@dustinlewallen2645]

Being an electrician, I love my trim square.

[@gearhead4013]

I love mine! No oxidation on mine yet but I’m glad to know it’s covered lol. It’s definitely a handy little square!

[@VCGConstruction]

🤣👍🏻

[@scorporsupremacy7948]

Got mines for the size and it’s working out fine for me.

[@elfllaco555]

I already habe that square i love it Vince please talk about tool you need for professional fly reglet installation

[@ibrazeau3044]

Good and useful little square. I just bought two of them. I use it now for electrical installs, panel boxes and saw blade square adjustments... faster then a tape and not too big. I do not use it for framing at all but I'll use it for marking. Two things though 1- the edges are quite sharp, real sharp and I had to I dull them out with a very fine sandpaper, 2- the markings are not bright white but are more of a beige like colour. Not as bright as the marketing images want your to believe. Future upgrades wanted - To have an incorporated mini level in it like the Martinez (also on the bigger one) and to have an even smaller model... say 3 1/2" max like Woodpecker. Best of all worlds.

[@jeffreychance2000]

Just found your channel, instant fan lol I use one of those trim squares and know a few tricks 👍

[@VCGConstruction]

Awesome! Thank you!

[@dakotaslim]

Vince's east coast, high speed patter initially made these videos difficult to get through. Until.......I started talking back to video Vince. Now it's a dialog. Makes my wife think I'm crazy though. Small price to pay for the knowledge gained.

[@nicholasameline7362]

I just got the millwakee 12volt rafter square works great

[@LaGrasa617]

I made it to Home Depot before 9pm. Thanks Vince!!! Milwaukee is always welcomed!

[@shhonda599]

I picked this square up at Christmas. I haven’t had a chance to test it yet. I have always wanted a smaller speed square because of different reasons. This is an awesome square.

[@konamanstudio2447]

I bought one of those little squares from 3 to 4 months ago every time I load up my box I put it in there does this lot easier when you're cutting two by fours down when I'm cutting angles I do like to have my bigger Square I like that room the clampdown I just got into two-by-fours at the perfect take care guys and cheers with a beer

[@chipshot442]

Love it Vince, Merry Christmas and Happy New Year my brother!! All the best!!! If its a new tool I want it, LOL.

[@VCGConstruction]

Yoooo Chipshot!! Happy holidays to you and yours!!

[@AntonioClaudioMichael]

I picked that Milwaukee trim square up few weeks ago love it

[@ghg789987]

I just bought one. Could think of a million great uses for it! Most my work doesn't require a full sized square.

[@themaintenanceman1]

Merry day after Christmas!!! I’m grabbing one for when I do back splashes at work. We do 3x6 subway and this would be perfect. 7 inch one works and isn’t real bug but this would be perfect. Thanks for sharing!

[@Das_burrito]

Already got it!! Love it

[@lovableted]

i got i like it i don't use one much fit in my pac out nice good for when i need to make backing for plumbing when have to support

[@johnlegnos4727]

use mine every day. I love it

[@GG-tt3sg]

Like this guy always real with any product

[@stmichale6192]

I’d like to try it just for it being smaller. My speed square pops out of my pouch more than I’d like it to.

[@robertgeary7520]

Great video thanks 👍

[@Joenoblocks]

This is awesome i may have to pick one up on the next depot trip thanks Vince

[@VCGConstruction]

Thanks Joe!

[@thomasbeckett1245]

Definitely a handy tool for my leather work… love ❤️ it

[@ProfAngusMacgyver]

I got both Milwaukie squares in a package deal. And I do love the smaller trim square. Fits nicely in to my back pocket on the days when I don't really need my tool belt

[@SuperAbuDawud]

Top video. Hat's off to Vince

[@CirYdnar]

Happy Holidays to you and your family.

[@nuclearexplosion5841]

Nice vid I think I might just have to find one now

[@anthonygm85]

This seems to be like a handy little guy, I'm a automotive tech and my speed square followed with me I still find uses for it even though it's wood tool technically had my Swanson for 20 years

[@spdracr4life]

The notches are every 1/4" and not every 1/8"

[@TheNorthlandWorkshop]

Just got this square for Christmas! For what I do a regular speed square is over kill and this is a much handier size.

[@ejm_demon8263]

Great video, I need one of those 👍

[@josejuarez8227]

Vince, you rock brother! Infected, LOL!

[@shawngraham4902]

I'm a structural steel fitter and this thing is great on small beams

[@eatmelily]

Almost bought one the other day, after seeing your demo with the notches, I'm buying one...

[@VCGConstruction]

I like the notches

[@gobucky3610]

I've got one and its awesome. I use it mostly for marking 2x4s and its the perfect size. If I need to mark something bigger like plywood, I just use a framing square.

[@williamrickelman8208]

I use this square almost daily. I love compact tools.

[@prodesigncarpentrysubcontr989]

I like that speed square i think i may have to get one of them!

[@josephmalinowski6817]

I actually purchased both of the Milwaukee squares and the smaller one is nice just because it fits into your tool pouch so much nicer but it's only really good for two by fours one by threes and then I have the big I go Waukee speed square for two by sixes but I do find myself using the bigger speed square in the smaller ones

[@ManCaverTools]

I will be picking one of those up

[@midas3094]

Dewalt for life this guy is a Milwaukee rep

[@bullyjay1957]

Cant wait for the "Fuel" version of this

[@802Garage]

LOL I literally just got a set of Swanson speed squares for Christmas and now I'm wishing I had this one. I like the notches, the precise markings, and the size! Being a bright color doesn't hurt either. Easy to spot!

[@VCGConstruction]

I do appreciate the notches!

[@petetakingover1550]

these marking notches are sick !!

[@nobodyisprfct]

Have you ever used any woodpecker products? Wondering if there is an alternative view.

[@johnpostlewait4219]

So anyone catch the bit box still hanging by the magnet in the background.

[@MrBruce-nd8fs]

What kind of pencil are you using?

[@RockingB5]

Have you seen the new Rigid flip out speed square?

[@mjc8761]

Would have been a good stocking stuffer I think! Thanks for the review

[@VCGConstruction]

It sure would have!

[@ManCaverTools]

awesome video

[@mrSaviorself]

@vcg_constructio I don't know where to post this. I just saw Walmart is selling hart power tools where do I suggest this for a TTR?

[@chrisfyfe4047]

Do want ! haven’t seen one in Canuckastan yet !

[@danieldepot4090]

Now I'm going to have to buy 5

[@jakerogers6562]

On a side note, i have witnessed a speed square being used as a nail set. I would dare to guess that the limited warranty doesn't cover that lol. I like the red of this one. Thank you for the heads up VCG !

[@AngryGinger1108]

You should review the kreg multi mark next. Great little tool.

[@brents2848]

I would like to try one

[@kaipo8489]

Is it big enough to be used as a saw guide?

[@kbguthriehomes2343]

Love this sqaure had to get mine sent from over seas not available in Australia.

[@completeconcrete5624]

I carry a small trim pouch for working in kitchens, baths, and doing flooring. It has a small slot in it that fits a 7" s.s. but it sticks out a bit when I holster it. This trim s.s. fits perfectly in their; it's light, has good heft to it, edges are more crisp than other squares I own, and I love the machining etches or marks/chatter on the edges that make a nice zip sound when I slide it along the workpiece or lumber. Compare it to other squares out there from Stanley or Swanson and you will see the difference in the small details that make this speed square a cut above. Pun intended.

[@chrisfyfe4047]

I’ve been using a Starret machinest square ( 4”) and a protractor .

[@chriscrux4556]

Legit question, why pay 10x the cost for something that does the exact same job for a fraction of the price?

[@latinhorse75]

Who makes that pencil please?

[@davidbahr9068]

Takes an interesting carpenter to get a painter to subscribe. I'm a painter, and I subscribed

[@sgtron116]

Picked one up

[@WEALRO]

Nice pencil you got there lol I love my trim square by Milwaukee 👍✌️😎

[@VCGConstruction]

I like that pencil cuz, thanks!!

[@bushwhackfpv6610]

great video!!!

[@VCGConstruction]

Thanks Bushwhack!!

[@SouthBaySteelers]

40,000+ views! Pretty cool

[@eddieabernathy5998]

Should I buy a Dewalt jobsite table saw or Metabo withstand both $300

[@fernandofuschini2543]

Hey Bro, do you know, If they make the speed square with metric system? Here in Brazil, we use the metric and i believe, that can be more prodctutive to me. Thanks Vince.

[@caminoprojectUS]

there may be one closer .... 120mm would be about 4.72in size....180mm is 7in

[@wemcal]

Ok, The notches sold me... I can see it being useful

[@VCGConstruction]

I agree on the notches!!

[@austinjk24]

Johnson level also has a small 4 1/2 inch .

[@kingofthecrease30]

CONGRATS TO VCG ON 154,000 SUBSCRIBERS !!! 👍👍

[@VCGConstruction]

Thanks KOTC, we appreciate it!

[@TheCrash2769]

i used to use my speed square to cut my 2x4 and what not but then my boss told me not to and that it take longer and im wasting time to use my speed square when cutting studs and what not. but the funny thing is i can cut faster with it then with out. plus i dont waste time marking the work. my boss sometimes thinks his way is best and fastest when in reality its not. yet he is not willing to be shown differently.

[@hl9740]

thanks vince!

[@VCGConstruction]

Thank you!

[@tonytully4943]

Sometimes it would be really handy to have a smaller speed square. I'm going to get one

[@sawdustandsurvival]

Even on 2x4s I like the overhang of the good old speed square to use as a guide to keep the plate of my saw vertically level. Although this would make my arse look more 'trim' when carrying it around.

[@SweeturKraut]

I picked up one of these today at the depot. It was packaged together with a full size square too. I think it was

[@jamielukas100]

Something in the uk air that turns it to aluminum for sure

[@michaeldahm214]

Or it could be an “eye” problem. It’s a long word, easy to miss that last i.