The weirdest thing at the Sydney international boat show 2023. Interesting design, time will tell if it’s a winner.
Пікірлер: 46
@DktheWelder10 ай бұрын
Cool , I was thinking of a surface drive like that but with the prop straight off the crank but just above the planing surface
@25hpboatracerman10 ай бұрын
Hi mate, Now that’s a way better idea, that I would buy 👌👌 Cheers 🍻
@XSAILOR6510 ай бұрын
Interesting concept! a bitt worried though about possible water ingression....but if the duct can be routed high enough, maybe OK. Servicing in water is guess about zero, absolute nothing that can be done?
@bradleyfarquhar202310 ай бұрын
good job mate very interesting out bored some think different
@25hpboatracerman10 ай бұрын
Hi mate, Very different indeed, don’t know if it’s going to succeed. Cheers 🍻 Aussie Boat Guy 😎
@josephhalwagy643510 ай бұрын
Thanks for the clip. Would it fit on a standard 5.5m Quintrex without extensive mofification to the ass end of the boat?
@25hpboatracerman10 ай бұрын
Hi mate, I’m not sure but think it does come to suit long shaft transom. I would stick to standard outboards though until it proves itself. Cheers 🍻 Aussie Boat Guy 😎
@TracyGolden5 ай бұрын
under board Evinrude force
@25hpboatracerman5 ай бұрын
😂😂😂
@stancrawford21473 ай бұрын
They say it only needs to be serviced every 500 hours or 5 years however; they only warranty it for 3 years! What does that tell you. Another e-tech situation brewing! Run!!!😢
@25hpboatracerman3 ай бұрын
That’s funny 😂 Can’t wait to see how they last, seems weird to have an outboard underwater. cheers 🍻 Aussie Boat Guy 😎
@mofjet10 ай бұрын
Looks like a solution to a problem no one knew existed 😂
@25hpboatracerman10 ай бұрын
😂😂 I do like new things but we will see if this one is a winner. Cheers 🍻 Aussie Boat Guy 😎
@woodfamily469110 ай бұрын
You know my thoughts 😂
@25hpboatracerman10 ай бұрын
Yep, I do 😂😂
@galada5210 ай бұрын
That thing is a disaster right from the drawing board. The tests have shown that the holeshot with this engine compared to a normal outboard...the Evinrude 150 G2 (some powerhead as the Rotax) over 10 times longer, 36 seconds to get on plane. Speed was lower, maintenance was more difficult. There is a big fall out at BRP over this disaster. If you go to Team Marine Service channel you can see for yourself what a clust F*** outboard is and how BRP treats their employees!
@25hpboatracerman10 ай бұрын
Thanks for you comments mate. The added weight further aft of the transom (planing surface) would definitely make it harder to get up onto the plane. I was a bit shocked to see that design. Cheers 🍻 Aussie Boat Guy 😎
@TeamMarineService17 күн бұрын
UNDERBOARD!!!!!
@JR-ho5qmКүн бұрын
@@TeamMarineService the outcome of this Rotax is still to be determined. It seems to make sense on the Pontoons. But just so you know the Evinrude G2 is a much better outboard than the internet makes it out to be. There is allot of haters and negative coment leavers spreading hate on what really is a fantastic 2 stroke engine. I’m on my 8th year owning a 225 H.O. And it’s a rocket! 🚀
@Phantom-mk4kp10 ай бұрын
Looks too vulnerable to me What happens when seals fail. Would never go to sea with it
@25hpboatracerman10 ай бұрын
Hi mate, I was very surprised to see that design, time will tell if it is a success.
@Phantom-mk4kp10 ай бұрын
@@25hpboatracerman Another point how do you inspect/work on it while afloat Edit: just seen another video that shows it tilted right up, the whole engine clears the water. So still accessable
@25hpboatracerman10 ай бұрын
@@Phantom-mk4kp But not accessible really as the cowl is a sealed unit and apparently needs to only be opened by a special specific mechanic 🤷♂️ Cheers 🍻
@Phantom-mk4kp10 ай бұрын
@@25hpboatracerman OK, so it's back to a NoNo then, especially for the ocean
@gabenieto31139 ай бұрын
As a boat mechanic i thought the new yàmaha and mercurys were a pain to work on Evinrude is in its own league with this one
@25hpboatracerman9 ай бұрын
😂😂 Hi mate, You said it very well, let’s just say, it’s an interesting design 😁 Cheers and all the best, Aussie Boat Guy 😎
@wessle32338 ай бұрын
ya i work at a BRP dealership and i hope nobody buys this shit
@JR-ho5qmКүн бұрын
@@wessle3233how were the Evinrude G2s for you guys? I have really enjoyed mine for the past 8 years (225. H.O.) people really like them in my area. I really don’t understand the hate. I think it’s mostly haters spreading rumours.
@jacquespoirier907110 ай бұрын
what the life expectancy for that engine, to pull 150 HP from 1.9 litre, the engine should be overstressed and of course its life is reduced, for example, the expected life of a jet ski is about 500 hours when the life of an I/O drive based on an automotive engine can easily reach 2000 hours if treated reasonably. good video
@25hpboatracerman10 ай бұрын
Hi mate, I also have a lot of questions about that motor and share your thoughts too. Cheers 🍻 Appreciate your comments Aussie Boat Guy 😎
@Phantom-mk4kp10 ай бұрын
@@25hpboatracerman It's 2 stroke so not much different to a 2 litre V6 mercury for power output, in fact a bit less
@ptsdgopedsnbikes815610 ай бұрын
@@Phantom-mk4kpi don't think that's a two stroke
@Phantom-mk4kp10 ай бұрын
@@ptsdgopedsnbikes8156it's a 2 stroke
@davidlove78255 ай бұрын
From the people that bought you ETEC.....an outboard which lives underwater. What could go wrong. Seriously it looks wrong.
@25hpboatracerman5 ай бұрын
Hi mate, Yep, well I can think of a lot that can go wrong 😂 cheers 🍻 Aussie Boat Guy 😎
@chrisandwillhobbies10 ай бұрын
looks like a rich mans toy thats not really intended move past the first owner, bit concerned about the lifespan of a jet ski motor,
@25hpboatracerman10 ай бұрын
Hi mate, Does look that way, I’m not 100% sure it’s a jet ski motor, I could not find much out about it at the show. I just don’t know about the actual motor being submerged 🤷♂️ Cheers 🍻 Aussie Boat Guy 😎
@kevinwolfe46324 ай бұрын
Junk
@25hpboatracerman4 ай бұрын
😂 you said it. cheers 🍻 Aussie Boat Guy 😎
@justinschmidt91809 ай бұрын
What a complete pile of absolute junk . Only an engineer would submerge the entire engine under water what could possibly go wrong
@25hpboatracerman9 ай бұрын
😂😂 Yeah, well I was very surprised to see it at the boat show, I could think of a fair few things that I would have made different. Cheers 🍻 Aussie boat Guy 😎
@anthonyrodriguez6516Ай бұрын
Absolutely garbage
@25hpboatracermanАй бұрын
😂😂, yeah, I don’t think they will sell too many. Cheers 🍻 Aussie Boat Guy 😎