NEW Paslode Cordless Coil Siding Nailer!

[@driftless7134]

I am so excited for this nailer! Game changer.

[@miillersconstruction]

Its the real deal!!!

[@yiannimamouzelos5391]

Hi, I’m a carpenter from Australia whose had this gun for a few years. I highly recommend to minimise jams, use the Paslode Oil first thing in the morning before use. I find it pretty much removes most jamming problems that Australian Carpenters have had with these guns. They also made a free upgrade to the guns about 3 months ago to fix most of the jamming issues so I’m guessing the US release might have gotten the pre upgraded guns. other than that they are a terrific nailer.

[@miillersconstruction]

Thanks for the feedback! I'll continue to monitor it. We've only experienced one jam so far in 3k shots.

[@Motivation_One88]

@@miillersconstruction You are so lucky mate :D

[@yiannimamouzelos5391]

@@Motivation_One88 Your Gun may be due for the new upgrade kit that’s available. Just take it to anyone that repairs Paslode and they should fix it for free 😊. Also just make sure to not use it for bump firing as it’s not really made for it. It’s more of a cladding and bracing gun.

[@TBird89]

@@yiannimamouzelos5391Paslode USA will release a bump fire mode framer soon. Paslode Australia tested the bump fire framer a few years back but didn’t see if was necessary in how we put things together in Oz. So Paslode has the technology. Time will tell.

[@TBird89]

Mate good review. Being using these since they came out. Great for Hardies cladding, soffits, metal anchors, blueboard sheeting, keep the oil up to the feeder pump on your big days. Gas cartridge is available in Australia in single bottles at the hardware stores so need to buy a whole box of nails. Paslode reps here have also informed me that a new trigger may enter the market as to use the gun sideways and make it easier to squeeze the new trigger. You may get drive pin jams but that’s because the plastic gets caught on the feeder pin or nails have entered the slot on an angle. You’ll be getting the straight bradder soon as well so save your money. It will 14/16 g.

[@samuelbonacorsi2048]

Nice nailer! I like the power to weight ratio of these nailers.

[@miillersconstruction]

@@samuelbonacorsi2048 it's really nice

[@Marcusga41]

Will be nice if you can use it for shingles ❤ I love paslode framing fun never let me down

[@nikosnikolaoumusiclife1251]

Thanks for this video. I need to know... what is the referents with previous model? Because this new one is $250 more expensive in Melbourne. Thank you,

[@sionsanders3008]

Great video! When will this be available for purchase?

[@miillersconstruction]

Its available right now! Lowes and NailgunDepot!

[@charlesjacksoniii8787]

Great review, I will be getting one of these to install some James hardi lap siding on a 12x20 garage I am building.

[@miillersconstruction]

Thanks for tuning in. You will love it man.

[@charlesjacksoniii8787]

@@miillersconstruction I think so to I have the cordless Paslode framing and angle 16 Guage finish

[@СергейРожков-э1ц]

купи лучше milwaukee

[@javierrodriguez9911]

Does it work at a faster pace?

[@darceyrice8217]

I installed a coil of nails, a new fuel cell and a fully-charged battery, but nothing happens when I depress the trigger. I can hear the motor/engine making noise. What am I doing wrong?

[@miillersconstruction]

@@darceyrice8217 great question. I haven't had that issue. Did you try a different fuel cell?

[@thomascarr9763]

Can it be used for vinyl siding? How did you get your blow in insulation packed that tight without a backer board?

[@miillersconstruction]

@@thomascarr9763 there is no siding tip available for it and the heads of the nails are too small for vinyl anyways. That's damp sprayed cellulose. Our favorite.

[@alexsela7507]

Do you need the paslode colatted nails or can you run any coil in

[@miillersconstruction]

@@alexsela7507 I have only tested it with Paslode nails. They are 0 degree plastic collation

[@135SoHc]

This gun uses the same fuel cell at the joist hanger nailer which is not sold separately at least in the U.S like the orange framing fuel or the yellow trim fuel. So you have to buy the paslode nails because you have no other way to get the fuel cell. Complete dick move on the part of Paslode.

[@TBird89]

Duo fast nails as well which is Paslode anyways.

[@joshuawiedenbeck6944]

​@@135SoHc It's how they release their products. There will eventually be separate fuel cells, but the first several months of rollout only have the kits.

[@Caymen43]

Does it have bump fire mode?

[@miillersconstruction]

@@Caymen43 it does not.

[@sataniccrow2607]

Don’t hold your breath it took them 38 years to figure out bump fire one the cordless framing nailer

[@javyjavier7826]

Thanks

[@Motivation_One88]

Bro just return it. We are using in Australia and I keep jamming 🤣.

[@miillersconstruction]

3k shots, only 1 jamb. You must be using it wrong 🤣

[@Jay_Jay1224]

Ill wait for another company to make one that is just battery not that stinking gas cartridges!!

[@miillersconstruction]

@@Jay_Jay1224 you'll probably be waiting quite a while then. Also I hope you can appreciate an extra 2-3 pounds of weight.

[@Jay_Jay1224]

@miillersconstruction I'm fine with that I will never use paslode my Milwaukee framing gun is 100 times better!!

[@miillersconstruction]

@@Jay_Jay1224 Im happy for you.

[@ryanmcgowan9199]

junkwaukee nailers are trash anyway what an overrated platform for carpenters. trash batteries, trash saws and trash nailers. hitachi and paslode end of story. even dewalt framers are lighter and the new version is way more long lasting.

[@Jay_Jay1224]

Hitachi is great but unless it's air paslode is slow garbage!!

[@ManpreetSingh-cowl]

THAT'S QUIET. You ever heard something louder?

[@JohnDoe-mk8qk]

It's dope but it's not knew and not electric ⚡

[@miillersconstruction]

It is new, and it is lighter than battery only powered tools. Dont confuse this nailer with the old and outdated Australian version. This is completely different. Educate yourself before you make comments, you will look smarter.

[@JohnDoe-mk8qk]

@@miillersconstruction I use them both electric n PAS don't confuse your sales n commission with knowledge your look stupid as fook

[@JohnDoe-mk8qk]

​@@miillersconstruction I know better lil homie don't confuse your commission n sales with your videos.

[@miillersconstruction]

@@JohnDoe-mk8qk Now your really looking foolish...