The new PENN Spinfisher V has been upgraded with a Water Tight Design, Sealed Slammer Drag system and full metal body along with several other advancements. Learn more at www.pennreels.c...
Пікірлер: 233
@Meditation4092 жыл бұрын
Penn is definitely on my top list....the 10500 models are pure work horses!!! ❤️😍
@PENNfishing2 жыл бұрын
Yes they are! Thank you for your support Al.
@owencorey97202 жыл бұрын
I want to pick up one of these beauties for shark and tuna fishing!
@PENNfishing12 жыл бұрын
Hi. Thanks for the kind words. Yes, the 9500/10500 SSV are both rated to hold #80 braid and have 40lbs of drag pressure. Both models would be plenty to handle a 220+ lb catfish. We appreciate your support.
@tunanorth11 жыл бұрын
The "threshold" for "made in USA" on Penn reels is about $249 retail. Although it varies a bit, the "threshold" for "made in Japan" from the various Japanese mfrs is about $349, otherwise they are also made in China, Malaysia, Viet Nam, etc.
@surethingsfly12 жыл бұрын
I love Penn fishing tackle, quality, durability, a pleasure to use! I have bought other brands but I keep coming back to Penn.
@sethlindsey1359 Жыл бұрын
My 6500 has been a beast. I've caught several 60+ inch sharks. Several nice grouper, and a few 40+ inch redfish. I also use a 4500 slammer 3. I love my penn reels. Would love to see stainless steel main gear and pinion gear across the board. As well as the power knob like the slammer has. The power knob would be a great addition to the spinfisher.
@PENNfishing Жыл бұрын
Thank you for your feedback and support Seth.
@sethlindsey1359 Жыл бұрын
@@PENNfishing hoping to pick up a slammer 4 2500 in the spring. I do a lot of kayak fishing for stripers and various other species and want to try the 2500 out and see how it handles large fish.
@PENNfishing11 жыл бұрын
For the wind knots yes the number one reason for wind knots is over filling the spool with line. The SSV's comes with line capacity rings so if you fill the spool up to the outer most line then you should not have any issues with wind knots. If you go past the outer most line then you will most likely have issues.
@uros10010 жыл бұрын
I have this penn spinfisher. Its realy great product. I'm using bullet proof 220 lb leader line and never have any problem. Its working prfectly fine and its worth of money.Material look great and solid i mean tough. Its 100 % water proof. Salt can't harm inside. You can fishing in rain or standing in water. Design is very cool. You can change handle to left or right side this feature i kinda like. To be honest penn this is my first product from you guys and u inpress me. I RECOMEND PRODUCT :)
@PENNfishing12 жыл бұрын
Great question. Yes, the new 3500 Spinfisher V is replacing the 4th Generation Spinfisher (430 SSg) and the Slammer 360. Also, the 3500 is similar to the Battle 3000 in size and line capacities. In addition, the 3500 is the smallest Spinfisher in the new series.
@PENNfishing11 жыл бұрын
Hi Jordan, the rod is labeled Spinfisher V. It is a graphite composite blank with stainless steel guides and aluminum oxide inserts. Thank you for fishing PENN, we appreciate your support.
@PENNfishing12 жыл бұрын
Hi, The Battle, Sargus and Fierce are all available in 1000 and 2000 sizes if you are looking for a smaller reel. Most anglers didn't need a smaller than 3500 in the Spinfisher V.
@PENNfishing11 жыл бұрын
The launch date for the LL models was scheduled for January and we have been shipping these models as promised but the demand is much greater than the supply at the moment. Please keep checking your local dealer or even check around on line as there are some stores that have these reels in stock. Thanks for the support.
@tunanorth11 жыл бұрын
The "threshold" for "made in USA" for Penn reels is at about $249 retail, and the models above that price are indeed produced in the Philadelphia plant. The SSV reels range from $139-$199. The Penn spinning reel series that is US-made is the Torque TRQ series [9 models]
@PENNfishing11 жыл бұрын
Not every reel will come out the box with a perfect line lay that is why we put two plastic washers in the box so that you can shim the spool for better line lay if needed. Detailed directions are in the owner’s manual on how to install the washers.
@roadrunner84288 жыл бұрын
I Thank You for the quick reply. I think these were the last series before they were sent to the asian market for manufacture ? Always wanted to add a new reel but couldn't justify the expense when I had my greenies and never replaced any parts on them. Amazing, especially when I have seen failures on the jetty or beach or through discussions of drags failing or gears being crunched by different manufacturers of newer equipment reels. And I never had a bail snap back losing any plugs. I and several other old timers with the old Penn greenies and some Mitchells would look at each other and chuckle listening to some guys curse their reels up and down at what they cost them and losing that striper. I have watched someone open up a Chinese reel of popular name only to see him remove roughly 40 pieces or so for a good cleaning and re-lube. I swear they make a throwaway so you buy another. I merely remove under ten pieces, clean, grease and assemble all in under one hour while enjoying a cup of coffee. Good solid made parts. I know the new reels are smooth and all with so many bearings, but I feel proud to see my reels on the beach vs. those shiny new alloy reels sparking in the morning sun.. There are some 550ss and 650ss in good looking condition on ebay roughly around $80.00 plus shipping. But I also see some 704's for $60 to $70.00. Really? I say I have a good investment in my shed. Contemplating whether i should buy one or not. A couple of the guys gave me that stare down when I mentioned I was looking to add one to a lonely 10' pole I have home. But as long as it's a US made Penn I should be welcomes to fish shoulder to shoulder with them. It's a family thing I guess you could say. Cheers and Tight Lines to all.
@PENNfishing11 жыл бұрын
LL stands for Live Liner and is built for live bait fishing. It has a switch you can flip to disengage the front drag to allow the bait to swim freely for the most natural presentation. It automatically re-engages when you reel in.
@PENNfishing12 жыл бұрын
Hi. Thanks for your question. The SSV4500 or SSV4500LL would be perfect for that application. We appreciate your support.
@PENNfishing12 жыл бұрын
StuckonLand, the Rampage Boat rod would be a great fit with the 10500. Better yet, all rods in the Rampage family are under $100 which is ideal. Thanks for the question.
@PENNfishing12 жыл бұрын
Thanks for the kind words. We appreciate your support.
@jacraig88111 жыл бұрын
I live in Hawaii and I looked at these reels today great improvement smooth I am getting the 6500 soon can't wait!!!
@tunanorth11 жыл бұрын
You don't specify what size line you plan to use or you have a preferred rod length, but the Penn Bluewater Carnage CARJG2050S70 can handle large fish and heavy drag, but is still light enough to be fun and cast smaller lures if necessary, and would balance well with a SSV4500.
@nkryptchn02855 жыл бұрын
I just bought the V 7500 about an hour ago. With a Penn rampage rod. Can't fkg wait to take em out for a ride in the " Salt life " so happy. Thank The Snook Nook in Jensen Beach for the assist. + 40lb Spiderwire Blue Camo Braid. Here fishy, fishy, fishy got huge Penn Slammer Drag for you.
@notaclue6384 жыл бұрын
How you finding it
@PENNfishing12 жыл бұрын
No, there are a few collectors that have them out there but they can be very hard to find. You can search by the model you are looking for or some people call them the "greenie".
@williejr797310 жыл бұрын
Beast reel just bought 4500 caught a 45 pound redfish no problem ,awesome make penn, really good product
@tunanorth11 жыл бұрын
Hi Thang, There are at least a dozen new SSV models; too many to all come out at once. The smaller sizes came out in the fall of 2012. The larger sizes and all of the "Liveliner" models were always scheduled for early 2013 introduction. Hopefully they will be in stores soon. In late 2013 you should also see a "longcast spool" model, and also a "bail-less" model.
@tunanorth12 жыл бұрын
Penn makes over 30 different reel models in the USA, plus another 11 "stock" bail/color options, plus everything in the "Custom Shop" is made right in Philadelphia. Two new "USA" models came out this year, and at least 5 new "USA" models will come out in 2013.
@tunanorth12 жыл бұрын
Penn currently makes over 30 different reel models in the USA, along with another 11 "stock" color/bail options, plus everything in the "Custom Color Shop". Two new "USA models were introduced at the ICAST Show this week, and at least 4 more USA models will be introduced at next year's show.
@PENNfishing12 жыл бұрын
This is really hard to answer because you have so many things to consider. The size of the reel, the rod that you are using, the line that you are using all play a big role in how far you can cast a 1 oz plug.
@PENNfishing11 жыл бұрын
The drags on the SSV's make plenty of noise. If you have a reel and the drag clicker is not very loud check under the spool and remove some of the grease from the clicker mechanism as the grease acts as a muffle.
@PENNfishing11 жыл бұрын
A lot of fishing choices comes down to the angler's personal preference, as a manufacturer we try to draw a portfolio of product that appeals to those preferences.
@PENNfishing11 жыл бұрын
The combo rod says Spinfisher V and is black and gold with a gold diamond wrap above the foregrip.
@Huttywhanga11 жыл бұрын
Ike Here in New Zealand there are not that expensive but top quality Too many positives with this Reel ...Thanks Penn!
@tunanorth12 жыл бұрын
Good choice; BTW there is a full "Penn West Coast Preview" on KZbin that covers the Spinfishers, Torques, Squalls, and more specifically for the California/Baja angler.
@PENNfishing12 жыл бұрын
Hi. Thanks for the kind words. We are sorry to hear about your kayak incident, but it happens to the best of us. We are sure you will love the all new Spinfisher V especially if you take it on your kayak (It is fully sealed to eliminate the possibility of salt getting into the reel). We appreciate your support.
@realtreelife12 жыл бұрын
probably watched this about 20 times now. i'm dying waiting for this reel to come out
@PENNfishing11 жыл бұрын
Our recommendation is 12-20 or 15-30 pound rating rod. It'll work just fine for jigging from the shore, too. Let us know how you do.
@compaqcris12 жыл бұрын
I know what to get on my birthday. im loving this reel hopefully the water tight seals can last ive been searching for something like this
@dewisetyaningsih92044 жыл бұрын
My favourite reel,I'm Indonesia
@tunanorth11 жыл бұрын
Tough to get one rod that does both of those well, but the Bluewater Carnage Jigging Rod CARJG65100S64 or CARJG80-130S60 do a great job of holding big fish out of the rigs, and the CARBW3050S70 casts well for most inshore/offshore species.
@tunanorth12 жыл бұрын
the "threshold" for "Made in USA" on Penn is at $249. For the various Japanese mfrs, the "threshold" for "made in Japan" is around $349; all reels below that line are made in China, Malaysia, Viet Nam, etc.
@MrBlizzard7696 жыл бұрын
I fish Tribs for salmon , I don’t need the saltwater protection but it helps ? I need the drag more than anything and these reels perform flawlessly ..... I have the 3500 for the little guys and the 5500 spinfisher V and the 5500 penn slammer III all with an extra spool for the big Kings when they move in . I lightly clean my reels and put a drop of oil here and there on occasion and have never had a problem ever . Mind you I am nowhere near pushing these reels to there limits . Oh I also have an older penn slammer 560 and the original penn battle that I have passed down to my son both of which are still like new after hundreds and hundreds of salmon . Greased the drags for him and upgraded the slammer 560 with carbontex and there’s no doubt he will one day be passing all of these reels down to his children . Penn is second to none when it comes to reliability ..... you might not get the smoothest but when your a 4 mile walk from your vehicle you trust the durability more than anything .
@PENNfishing6 жыл бұрын
💪💪💪
@Starisholja11 жыл бұрын
Best regards from Danube river in Croatia. We are looking forward to new Spinfisher V beacouse Slammer and SSM moleds are very popular in Croatia. Also hope that price wont dramatically rise.
@PENNfishing11 жыл бұрын
I would say a SSV5500 would ge a good size for surf fishing but would be a little big for throwing small artificail lures like DOA's. I would say you would need a SSV3500 or SSV4500 on a Legion or Regiment (LEGIN815S70 or REGIN815S70) inshore rod for light artifical use and then for surf fishing I would suggest looking at the Prevail series of rods for the SSV5500. The PRESF1220S90 would be a perfect surf combo.
@xavozip111 жыл бұрын
Vamos a probarlo ...
@PENNfishing12 жыл бұрын
Yes. The Spinfisher V will be replacing the PENN Slammer in September, 2012. The two families have been merged into one.
@PENNfishing11 жыл бұрын
The SSV5500 would be the best size to cover all the species and techniques you listed.
@tunanorth12 жыл бұрын
Penn's "threshold" for made in USA is at about $249. This SSV series runs $139-$199, and so are Chinese production. the Penn Torque TRQ series spinning reels [9 models] are USA production, but are of course a little more expensive than the SSV's.
@PENNfishing11 жыл бұрын
With all fishing tackle if you take good care of it you should hardly have any issues. Yes the SSV or Torque Spinning reel would be the best reel for the application if you need a spinning reel. How much line capacity are you looking for? The SSV8500, SSV9500, or SSV10500 would get the job done.
@John_D210 жыл бұрын
I'd love to see this reel with the brass main gear and stainless steel pinion , like the Z reels. For the record my spinfisher v reels have preformed well so far..Alan Hawk summed it up nicely , "a beefed up slammer" and the slammer was damn good reel.
@heyboy9612 жыл бұрын
Looks like its going to be the best again!
@tunanorth12 жыл бұрын
The "threshold" for "Made in USA" on Penn reels is $249; the Penn Torque spinning reel series [3 different sizes, 5, 7, 9, plus bail or no bail options] is indeed "Made in USA", right in the Philadelphia plant where they have always been bade. Reels under $200 are still quite popular; the choice is make the offshore or simply stop making them.
@BassBossEmpire11 жыл бұрын
i caught a 40 lb tarpon on 3500 and that reel kept up with him the whole way awsome product
@davidlatorre425810 жыл бұрын
love penn rods and reels...
@PENNfishing11 жыл бұрын
The perfect rods for the SSV10500 is going to be the PENN Bluewater Carnage(CARBW3050S70) or PENN Ally (ALLBW3050S70). Both rods have plenty of back bone and can handle the extreme drag of the SSV.
@Khartoum296 жыл бұрын
Looks like a nice rod on the table i really like the metal reel keeper and seating what rod is that?
@tunanorth11 жыл бұрын
The smallest size is the SSV3500, which holds 210 yards of 8-pound monofilament, or 165 yards of 20-pound braid. perfect for inland stripers, most catfish, and light-duty surfcasting.
@roadrunner84288 жыл бұрын
I grew up with and still have and fish with my old 710 greenies and a 704, just basic wash down my at the end of day and opened and cleaned and re-greased every December as I slow down beach/jetty fishing. Am much older now and would like to find that sweet spot in between a 710 and 704, preferably in the ss series. So would the 550ss, 650ss or 750ss be that sweet spot with a 10 or 11' pole. ?
@PENNfishing8 жыл бұрын
+roadrunner Appreciate your support and loyalty, roadrunner. The 550ss would be the closest in size between the 710 and 704, however the 650ss would be a better pairing to a 10’-11’ rod. The metal SS series was discontinued over 25 years ago though, you'l need to look on EBay or shop the swap meets to purchase one.
@PENNfishing11 жыл бұрын
I would look at the Prevail surf rod series. I would go with a 15-30 or 20-40 model.
@PENNfishing11 жыл бұрын
Armando, max drag on the SSV ranges from 20 to 40lbs, you can see the specs for all models at the bottom of the product page on our web site - pennreels
@stephultura11 жыл бұрын
Belle promotion !!!! À quand sa diffusion en France métropolitaine ???
@PENNfishing11 жыл бұрын
Hi Jesse, our recommendation is the Prevail 12' rods. PRESF2040S12 is the model number. You can find them on our site pennreels com. (We can't include URL's here, per KZbin, apologies.)
@TootaMagoota6 жыл бұрын
I just bought the 8500 LL, pretty stoked, its my first ever expensive reel, matched it with the Penn Battalion Rod. Just wondering though on this video why every reel I saw was rigged for left hand reeling? Is that a Northern Hemisphere thing? or just by chance all these fellas left handed? Coz thats uncanny.
@assandapain12 жыл бұрын
Penn really out done themselfs .. could use one for my new 12 penn torq rod got to beta test this baby.. love always charley
@BobbyZataTv2 жыл бұрын
love it reliable reel.
@islandsoutdoors23185 жыл бұрын
A friend got me a 10500 about a year back yesterday we were taking it out for a test and review on the beach after trying to jam my rod into the sand the gamble hit a rock and the reel root broke I honestly don’t want to put it down because I’ve never really gotten to use it was wondering if you guys sell the housing so I can probably transfer everything over to a new housing or if the foot can be welded some how
@PENNfishing5 жыл бұрын
Hi, there. I'm sorry to hear about your reel. You can find more info on servicing here: www.pennfishing.com/PENN-service.html
@tunanorth12 жыл бұрын
It will run about $199, but will not be available until a few months after the other sizes.
@357magnole89 жыл бұрын
How about a maintenance video for these reels. I take things apart all the time with no issue but this reel kicks my ass. I can get the handle off, undo the screws that hold the side plate in place but I cant get it completely off. Reel has been running strong for over a year, but its time for maintenance and I cant get in the damn thing.
@Diwash17 жыл бұрын
can anyone tell me why the daiwa reel costs 1300 and is still justified?
@jeremiahdebarge80215 жыл бұрын
Wow I want to buy one of these reels I'm going to see how much it cost on amazon
@thiranaikainetr72885 жыл бұрын
Big game PENN !!!!
@christianmorriswilliams70728 жыл бұрын
what is the difference between the fierce 2 and the spinfisher v.? (talking about fishing capability and not the reel size.)
@PENNfishing8 жыл бұрын
Materials and features, the SSV is a smoother, more durable reel. You can compare specs on both reels at pennfishing.com
@zachmiller245610 жыл бұрын
What type of rod will be best with the Penn spinfisher 10500 for landbased shark fishing and casting out for big sharks?
@mojondro12 жыл бұрын
thanks and im going to try not to tip my yak anymore jajajaj ,and as soon i got some money you can bet im going for the spinerr v 4500 im in love
@TarponWorld8 жыл бұрын
I have the Spinfisher 10500, what Jigging rod will match it for pulling on big fish offshore? Bulletproof reel! Thanks in advance!
@PENNfishing8 жыл бұрын
+Tarpon World Check out the Carnage II jigging rods. We recommend this model for the SSV 10500 CARJGII80200S60. www.pennfishing.com/penn-rods-spinning-rods-penn-carnage-ii/1371189.html#q=carnage%2520ii&start=5
@TarponWorld8 жыл бұрын
Thank you!
@thefabsuz11 жыл бұрын
should add some noise to the drag. i hate the lack of it
@TieOneOnFishingProd12 жыл бұрын
@tunanorth oh ok i see well i dont mind spending a little more for made in the USA quality especially on a penn
@bradneumann8377 жыл бұрын
I bought the ssv 10500 for spoonbill snagging and I brought a 100 lb fish with 100 lb braid to a dead stop in the Missouri River and landed it with ease! What sise would be good for river fishing walleyes? I was thinking the ssv 5500? Need the power for fishing in current.
@PENNfishing7 жыл бұрын
Hi Brad, you can land on the size that's right for you based on the pound test of line you'd like to fish. The SSV 5500 is rated for 10-15# mono or 20-40# braid. Our website shows the full specs for each reel, pennfishing.com, just let us know if you have further questions.
@bradneumann8377 жыл бұрын
PENNfishing ... I fish slow but strong current in the Red River of North Dakota I usually use between 10 pound and 20 pound model or 20 to 40 pound braid and I need at least 250 yards of mono or braid. when the fish get into the current it's hard to bring them back through to my side. sometimes you hook into a great big catfish so I need a good reel to aid in stopping that.
@eddiehernandez10167 жыл бұрын
I have 2 penn spinfisher 8000LL is there anyway to loosen or remove the rear drag I don't want the fish to feel any tension I fish for alligator gar and want the live line to be super smooth with zero tension
@tunanorth7 жыл бұрын
Unfortunately, there is no way to make the Live-Liner tension any less than what you can get by dialing it all the way back.
@PENNfishing7 жыл бұрын
ThHi, Eddie. This rear drag is set at a light drag almost 0, but you can loosen it by turning it counter clock-wise, and you would to set it to your feel/liking.
@tunanorth12 жыл бұрын
Do you most often fish with live bait, yo-yo style jigs, or surface jigs, and do you have a preference on the pound test line you will use most often?
@dougnoble99318 жыл бұрын
just ordered ssv 10500. what rod should i get i do alot of live bait and wanna use from grouper to surf casting.
@charlietaulbee61728 жыл бұрын
+PENNfishing do yall make costomer combos or no ? In intresed in purchasing one of your products
@Sarah-wt2zk7 жыл бұрын
I just need a good reek for catching 25-40 saltwater bass of a boat, and also a reel to cast off the rocks somewhere occasionally? which one do u suggest, I will buy immediately lol
@PENNfishing7 жыл бұрын
Hi, Sarah. Take a look at the Spinfisher series.
@ChinkAssdotcom11 жыл бұрын
wow this is great marketing Im sold I just got an abu garcia inshore but I will probably get one of these too
@PENNfishing11 жыл бұрын
I would look at the Legion and Regiment inshore series of rods. Any of the 8-15 and 10-17lb rods in both series would be a perfect match for the SSV4500.
@PENNfishing11 жыл бұрын
The SSV5500 and SSV6500 would be the best size for Blues and Striped bass.
@tunanorth3 жыл бұрын
The "V" series reels shown in this video are no longer a current model. Check out YT videos for the "VI" series Spinfishers.
@bidhanjoshee45427 жыл бұрын
is the handle is interchangeable in spinfishers?? i mean can you change handle to right??
@PENNfishing7 жыл бұрын
Yes, all of our spinning reel handles switch sides with the exception of the Z Series reels.
@jessejames76011 жыл бұрын
I just bought a spin v 10500 and I need rod advise,I mainly do surf fishing for big halibut and sharks.
@kaped2628 жыл бұрын
What rod was they useing for the groupers with the Penn spin fisher
@hammer44head9 жыл бұрын
I just ordered the Spinfisher 3500, I have 2 older Penn Z's that are awesome reels. I recently purchased the Fierce 4000 and it was a real disappointment. Lasted less than 2 weeks surf fishing. I am anal about cleaning my reels and rods after fishing but it still froze up after reeling in a Perch. Cant wait to get this 3500 on my Lamiglas and go slay some Surf Perch SLabs!!!!
@PENNfishing9 жыл бұрын
hammer44head Sorry to hear you had trouble with the Fierce. All of our gear is backed by a 1 year warranty, we'd be happy to repair or replace the reel for you. Give our customer service team a call and they'll work with you to get you back on the water as quickly as possible. 800-892-5444 M-F 8am to 6pm EST. Appreciate the chance to make it right.
@hammer44head9 жыл бұрын
Thanks for the response but I do only Salt Water fishing and I think the SpinFisher is what I need so I upgraded from the Fierce. By the way I got it this weekend and fished this morning. Fantastic Reel that 3500.
@christianmorriswilliams70728 жыл бұрын
i have a question. will you be able to switch the current drag on the spinfisher v to the dura drag that is on the slammer 3. the slammer 3 drag system looks a little more durable.
@PENNfishing8 жыл бұрын
Sorry but no, they're not interchangeable, the dimensions are different.
@joej24094 жыл бұрын
I have 3 different size penn battles love the make
@leonardomayurbina14177 жыл бұрын
Which recommend for boat fishing and surfs sting i was planning to buy the Spinfisher 8500.
@PENNfishing7 жыл бұрын
The Spinfisher 8500 will work great. The PENN Spinfisher V features our Water Tight Design so whether you dunk the reel in the surf, or let it ride in the spray all the way home, you don’t have to worry about saltwater getting into the gearbox or drag system.
@rizkythb72343 жыл бұрын
Good produk
@GiovannyMoscozo Жыл бұрын
I wanted to know if Penn can make Penn Fathom ll Level Wind in 2 speed?
@jplzkxxx031512 жыл бұрын
Oh my god ! Amazing! Penn is my favorite reel company, and now theyre making sealed, manual bail reels for low prices. Defiantly getting one. Prices and sizing chart ?
@konnib63454 жыл бұрын
I just bought the 10500 for shark fishing what rod is the best
@hcoffman10011 жыл бұрын
I'm probably looking for line capacity upwards of 400 yards with 65lb power pro braid
@nmigliore12 жыл бұрын
Can't wait!
@nasiasteel91054 жыл бұрын
Which Penn reel is best for a 9-foot battalion rod
@hcoffman10011 жыл бұрын
Would you say this is superior to the Battle? Also, I'm looking for a good reel for tapon fishing the surf, one that can stand up to a heavy fish with plenty of line and also endure tough saltwater and sand conditions-is this the reel? If so, what size would you reccomend?