I have fun in the entire process it's my hobby . It doesn't bother me to load up 10 primer tubes . But the main problem now is finding primers 😂
@jonclary784 жыл бұрын
TEST Fifty I used Midwayusa and Natchez shooter supply. Both had primers but shipping took close to a month. Not sure how they’re looking now though.
@62dobie3 жыл бұрын
Facts.
@jamesowens27813 жыл бұрын
Primers are the new unicorn.
@LV_CRAZY3 жыл бұрын
I'm just watching this to remember what primers look like. Ah, the dystopian hellscape we've created for ourselves.
@triarii_004 жыл бұрын
now if they just make this so it sits up top and feeds straight to the press...
@jasonwoody80414 жыл бұрын
i was just going to comment this statement! if they did that i would tell them shut up and take my money! lol.
@Boostin15034 жыл бұрын
Don't see why one can't mount it up high with a longer or shorter tube attached. Just need to make the mounting brackets.
@DaveSmith-cp5kj4 жыл бұрын
You don't want that because if a primer flashes off, it will detonate the entire thing. The Dillon tube is strong enough to contain the blast but a plastic container full of primers is bound to send fragments everywhere.
@bmwflyfisher4 жыл бұрын
I agree with Jason and Bootin...Direct feed into the machine. Make it 550, 650, 750, 1050, 1100 complaint. Just tell me where to send some cash! Flash off???? Really...You must be beating on your machine with a ball peen hammer!!!
@christopherguy12174 жыл бұрын
So buy a Mark 7 and you can get that option.
@marcuspalmer18894 жыл бұрын
Only one size is a deal breaker. I'll wait until the 2.0 version comes out!
@albertthesecond2104 ай бұрын
Your wit is over!!! LOL
@jasond1303 жыл бұрын
The clamps on your workbench are fantastic.
@richlovin21734 жыл бұрын
This was needed years ago. I no longer use primer tubes in my reloading process. I tried all the tube loaders and gave up. I now prime my cases during the case insptection/decapping process using a Lee primer loader. If I wasn't, I would buy this.
@jakesvids34672 жыл бұрын
Never had a issue with my tube loader and have put thousands through it.
@duanestrickler68144 жыл бұрын
I really like the looks of this product. I'm putting it on my wish list.
@arjones23304 жыл бұрын
Dude the vibra prime from frankford arsenal!!!! And a handful of tubes you can load 1,000 primers in 10 tubes in 10 minutes.
@rrl28494 жыл бұрын
I've got a similar Hornady product and I agree completely!
@62dobie3 жыл бұрын
For The Win. Vibra-Prime from Frankford arsenal. Hands down.
@dougkapounek90244 жыл бұрын
Cool, I've got the Frankford Arsonel buzzzy loader and it's ok, but this would be a fantastic addition. But as Marcus Palmer said doing both large and small would be a bonus !
@butchgeagan9768 Жыл бұрын
Needs magnets for 2 tubes, so you keep ahead without changing magnets or waiting to fill a tube. Great looking idea. Just like anything I have seen from them.
@paulvenn44474 жыл бұрын
Those DAA fellas are Hella smart!!
@BrianClarkpharmd4 жыл бұрын
Got the Dillon rf100 primer filler. Best purchase ever. Looks like this one works decent as well and definitely costs less.
@SVTboyy4 жыл бұрын
Nice! Double Alpha makes some good stuff!
@Ultimatereloader4 жыл бұрын
This thing is RAD. Pumped to start using it!!!
@davebittel77764 жыл бұрын
I just got one of these and it works great. I only wish it would run out all of the primers.
@johnmcmahon28862 жыл бұрын
Unit looks like a time saver,if one was able to obtain primers.Thanks!
@joevelaz4 жыл бұрын
Ordered mine and can’t wait since mostly all I load in mass is small primers.
@Ultimatereloader4 жыл бұрын
Perfect!
@daleleath41664 жыл бұрын
gavintoobe would you be interested in building a 300 prc for me
@rob5r14 жыл бұрын
'm going to stick with Vibra Prime. I would like to see a comparison of all the current devices.
@G56AG4 жыл бұрын
I had two different Vibra Prime units, neither one worked right, I finally gave up after spending well over an hour trying to load 100 primers.
@metalcrow88 Жыл бұрын
Just found out about this KZbin channel. I need sleep I keep watching.
@Ultimatereloader Жыл бұрын
Welcome!
@stephenconcannon41243 жыл бұрын
When I get a press that looks like a must have.
@jackkelley8904 жыл бұрын
Oh this is a God sent device. I am so happy someone is trying to remove the bottleneck priming causes in production. I am going to look into one of these asap.
@LuvBorderCollies4 жыл бұрын
Sure looks good, better than Dillon's unit. Was hoping it'd be closer to $100. If my reloading volume increases I might reconsider. It'd really help if it could do both sizes of primers, that's the biggest issue.
@wildmanjeff424 жыл бұрын
like your workshop and the shop video you made bud, that is sweet setup
@patrickc15084 жыл бұрын
I would only buy one if I could shoot a LOT more. Unless you’re loading a ton of ammunition (and already run a case and bullet feeder) I can’t imagine justifying it. You pretty much need to be just pulling the handle and watching the electronic alarms for powder charge, primer level, powder level, etc. I don’t even shoot enough to justify a case feeder. After a 100-300 rounds I am going to take a little break. Walk around a little bit. Sit down and load up a few more primer tubes, then get going again. It’s a great gizmo, but it’s only for high volume users.
@elieuncle4 жыл бұрын
I definitely want one. I gave a try to the one from Frankfurt Arsenal but that one didn't work as I expected it. I was actually surprised as I have other products from that brand that work perfectly well like their wet tumbler. But now that someone designed this machine I think I'm going to order it. Thank you for the review and the always so well produced videos.
@jtr823694 жыл бұрын
That is awesome, can’t wait for it to come to market & hopefully improve on it like 1000 primer hopper.
@zazkariafrady91524 жыл бұрын
$200 you have options. DAA, get guy at exit with will work for food sign to fill your tubes as you load, tell the kids to fill the tubes as a chore, or even stop at your local Lowes for some over the border help.
@chethaynes58024 жыл бұрын
My now grown children have fond memories of loading primer tubes :-D
@huntersmark9174 жыл бұрын
Very good stuff, I will be definitely looking at one of these for future bulk reloading purposes!
@MikeStJohn-du5ue4 жыл бұрын
I would purchase today if they did large primers.
@michaellinder49454 жыл бұрын
Now if I could score some primers!!!
@Tortie3004 жыл бұрын
I could never get my Frankford Arsenal Vibra Prime to work, all the hours I spent troubleshooting it could’ve been used to load primer tubes. This looks WAY better!
@tacitus74083 жыл бұрын
Definitely going to get one
@jeanpierrelabonte28682 жыл бұрын
Yes i would buy it. Now having another kind of vibrating platform for loading primers every 7 minutes. Problem is when my MARK VII drives at 1200 rounds per hour which is 20 rounds a minute, after 5 minutes Dillon’s primer tube is empty. So have to hurry between loader and primer, cause I only want to load primer tube for cartridge made. Don’t want to stock the wall on used primers.
@vintageelectronics96024 жыл бұрын
just checked the product page referenced Seems this product has quite some restrictions. 1. works only with dillon tubes 2. works not with all primers 3. Users have reported they have to make adjustments to the rig otherwise it would not work
@curtis25644 жыл бұрын
for that price id expect it to sit on the press and load small and large primers. maybe I would be more interested in version 2. I sure do hate loading primer tubes though
@paulgandy84004 жыл бұрын
Videos are very well produced! I don't have the budget for an "Exact" sizing die but am looking forward to your review. South African maker
@georgeshaya24503 жыл бұрын
Great information all the time.
@milboltnut3 жыл бұрын
best one so far
@ronaldkaplansky19384 жыл бұрын
Midway sold a vibrating primer loader for Dillon primer tubes for a lot less, a lot less, that worked. It was available years ago and I’ve been using it for years. Is is great for buck reloading
@mattlord29064 жыл бұрын
It wouldn't take much to attach that to the press and have it configured similar to the other feeding systems.
@PeterPetrakis4 жыл бұрын
@Matt Lord that's probably phase 2 of the product.
@jamesgrossmann3714 жыл бұрын
Heck with the primer tube reloader what about the table! Neat how the reloading machine rides on rails so it can move side to side. Anyway the tube step to be eliminated so the primer loader can be attached directly onto the reloading machine's primer feed?
@loupuleff5714 жыл бұрын
seems pretty nice i guess the only thing to make better is having more tubes to load so one or two are always ready to go !
@Ultimatereloader4 жыл бұрын
You actually only need one- fills in 30 seconds while you're loading! :)
@robinengland57994 жыл бұрын
Would like one for large primers as I load mainly 45 acp large primers! Nice accessory!
@bigboyzguns81644 жыл бұрын
Just ordered one. Thx
@Pje3ski3 жыл бұрын
I might buy one if primers ever become available again.
@tonydevich7937 Жыл бұрын
Looks useful
@snowgorilla97894 жыл бұрын
Am getting one for sure have Mark 7 650 Pro that runs 9mm at 810 per hour and don't start it unless I do a thousand. Currently use FA Vibra Prime modified and do a thousand primers in 10 tubes in about 7 minutes but you REALLY need to pay attention
@Bjones6754 жыл бұрын
Why didn't they make a mount for above the machine and have it connect to the primer tube just like the brass and bullet feeders?
@timmcfarland33112 жыл бұрын
I really enjoy reloading I try to have everything match Lymann and I only reload for my .308 precision rifle and my ELR 300 rum so the hand held primer seater is all I need but this looks like a really cool unit and would be very helpful if someone is loading bull 223
@xcaluber4 жыл бұрын
This will really save a lot of time and frustration.
@CompShooter544 жыл бұрын
How many magnets does it come with? Seems like installing and removing the magnet, plus setting the clearance, takes longer than filling the tube, even longer than the old way.
@OnCoreSoftware4 жыл бұрын
I"m definatly down for one. Pre-ordered. I do have the FA Vibraprime and hate it with Winchester primers. And yes, I have tweaked the heck out of it and it is better than when I got it, but still a major PITA. Can't wait for this!!!
@covid-19ispsychologicalwar102 жыл бұрын
With a small needle file, I opened up the small primer hole just a tit towards the tray side and the Winchester primers flow now; just like CCI and Federal do.
@fiftyshooter60764 жыл бұрын
Gavin must have received a special hand tuned prototype. My production model has tolerance problems with the plastic parts. It is very finicky. When it gets down to the last 20 primers my unit might get half of them passed to the tube but it could literally take half an hour. Fill it with 300 primers and start it. I can fill 2 tubes by hand, the old fashioned way before it will fill one tube. It has slots for the primers 360 degrees around the mechanism. They will only pass through the wheel on one small approximately 30 degree section that will actually pass primers. The one in this video works great. Mine passes between 0 to 3 primers per complete wheel revolution. It frequently “times out” and stops itself after making several revolutions without dropping a single primer. I must continually restart it. It is a huge time drain to get tubes loaded. My Dillon 1050 will prime cases faster than this device will fill tubes causing constant stoppages to my work flow. I really can’t recommend it.
@thomaspuma4343 жыл бұрын
A great tool
@mikehunter19544 жыл бұрын
Had to polish the ramp and lightly sand the drop hole for consistent operation. I’m betting 2.0 is what I should have waited for but I’m ok for now.
@johnsenuta10384 жыл бұрын
My Frankford Arsenal Vibra Prime does the same thing for a quarter the price.
@StarDangerous04 жыл бұрын
I was hoping for another box inside the smaller box.
@Andys0514 жыл бұрын
be great when they do the setup for both small and large primers.
@triarii_004 жыл бұрын
will this work will all primer tube or just dillion? can you use this with say hornady tubes?
@hdickmann14 жыл бұрын
Love your channel!
@dagamore4 жыл бұрын
Nice, but $200, that is a big hit for what it does, been using the FA VibraPrime for years, it was less than $50, and works like a champ, yeah it does not run while I am working the press, but for $150ish bucks less, that is a trade off I am willing to make.
@ironbomb67534 жыл бұрын
And you can always have more tubes loaded up ready to use. Usually after 400 rds or so, I'm ready for a little break anyway.
@donbarile89164 жыл бұрын
That's what I use as well. I load 5 or 6 tubes in the amount of time it took to explain about the error code blinking lights and the failsafe.... what?
@elieuncle4 жыл бұрын
The VibraPrime did not work for me. Primers would not go down the hole for some reason, I don't think I need to do anything special to make the product work so I returned it. I really wanted it to work. This machine may not be cheap, but it's cheaper than the one from Dillon and appears to have a better design and more flexibility. I'm willing to giving it a try.
@62dobie4 жыл бұрын
Eliezer Rodriguez, take the tops of the Dillon tubes off, and just load straight into the tubes, then put the tops back on when finished.That’s all. Works like a charm. I load 10 tubes, then start my reloading.
@wilk1284 жыл бұрын
dagamore, but, but, but, it doesn't say Dillon or Double Alpha on the side. hahaha Mine FA works just fine. I load up a bunch of tubes in advance of a reloading session.
@americanpatriot87864 жыл бұрын
I would like to see one under my Christmas tree 🎄
@andrewsteele76634 жыл бұрын
I like the concept, but at $323 plus change, I can buy a lot of primers for that. I will stay with the old method, cheers
@BobBob-il2ku4 жыл бұрын
Really hope they or the aftermarket makes a solution to hook it directly to your press.
@marredandback3 жыл бұрын
I've emailed Dillon and Federal and they both said that using Federal primers in a progressive press was a bad idea due to increased risk of detonation. I also heard that Lee specifically warns against Federal primers in their presses. Have you heard of this?
@chgofirefighter2 жыл бұрын
I've used all types of Primers on Dillon 1100, Evo Mark 7, never had an issue with detonation from "ANY" primers!
@covid-19ispsychologicalwar102 жыл бұрын
Never had a problem with Federal primers large/small on my XL650. I did detonate a large primer trying to fit into a small primer .45 auto case on a Lee Loadmaster one time, rang my ears but that was it. Now I hate loading .45 auto because of the primer size variations.
@stewmanmilner78434 жыл бұрын
Yep, very nice!
@cpfpv64104 жыл бұрын
cool gaget, I wouldn't be able to justify the price. For $200 I think I could find a better way to get the tubes filled. But I don't reload and shoot as much as some.
@kraemer664 жыл бұрын
Loading primers manually into tubess was the worst part of reloading. My solution was Hornady's "1911 auto primer." It is several times faster than that, 1/4 the cost, and can do either large or small primers. Total time to load 100 primers from primer package in hand to tube in press, about 15 seconds
@bsimmons002 жыл бұрын
Completely agree. Takes me less than a minute to load a tube.
@Jcreek201 Жыл бұрын
Cool idea. The fact that it can’t do large primers makes it worthless to me though. Interesting that 3 years later they still haven’t come out with one.
@leobertling6122 жыл бұрын
Loved your video on the Primer Pro. I am going to order one. Next question - Where can I get the slide rail/locks that you have on your reloading bench. I really want a set of those. Thanks.
@alzathoth Жыл бұрын
now. wouldn't it be cool if you could just mount this directly onto the tube feed on your press?
@kengarrett50154 жыл бұрын
what and when for large primers ?
@cwoodside9074 жыл бұрын
I shouldn't bitch about it being only for small primers. But, an added selling factor for it would be to have both options available. With a few parts swap, it'd be a nice feature to have both a large and small primer dispenser!
@richwhippersnapper4 жыл бұрын
How do you deal with crimped primer pockets in 5.56 brass? These must be properly swaged or reamed, or the primer won't fit.
@henryhester18974 жыл бұрын
I don’t load ammo but I want that thing.
@driver8M32 жыл бұрын
have you been using the Primer Pro since you got it? Any issues?
@TTiger862684 жыл бұрын
Love the last 2 videos on (Evolution and this) reloading, unfortunately, the $ is way up above my wallet, I'll stick to my LEE and RCBS. Great to see the items in use though.
@steelchallengepractice4 ай бұрын
Hello, I have just got to terms with me new Apex 10 Mark 7 reloading press in 9mmP, and I wish to start slowly automating it. So, what is the best or recommended primer upgrade?
@barndweller45734 жыл бұрын
This video just cost me 236$ I hope it works as well as he says. Now I need to see if I can make it load RCBS primers tubes as well as my Dillon ones. I use a RCBS bench primer for the stuff I do no the single stage press.
@kevintravis21543 жыл бұрын
Something I found first time. The screws that hold feeder plate are very fussy. Too tight and primers won't make it to the top. Too loose and primers may get to tube upside down. I had to watch the tubes fill 6 times before it worked correctly. The hopper seems to always have 2 or 3 not able to get to top
@jeffreydohl60364 жыл бұрын
I'd love to have one but, I only use large primers for all my rifles and only 2 9mm.
@tuzbubey4 жыл бұрын
Will it grow hair on bold head?
@davidhamrich9 ай бұрын
which way are they oriented in the drop? could this be adapted to a Lee 6 Pack Pro?
@dalefine33294 жыл бұрын
Nice! But $200. I will just keep going with Frankford Arsenal Vibra Prime. It works very well for me. I am sure they will mount them on progressive in one day. Thanks for sharing!
@richardbrouillette76902 жыл бұрын
Do they make one for Hornady progressive reloaders
@DickGibson2 жыл бұрын
I love my primer pro - except when switching from CCI primers which are silver and shinny, to Winchester primers which are gold and dull, the primer pro quite feeding? I cleaned it and it was a little better but not right yet? The winchester primers also got caught in the hole above the tube? Any Ideas??
@covid-19ispsychologicalwar102 жыл бұрын
Silicone spray on the primers helps them flow supposedly
@chrisgilbert21524 жыл бұрын
Oh Lord... Another step closer to heaven!!
@Ultimatereloader4 жыл бұрын
HAHAHAHA, well said!!!!!
@ecleveland14 жыл бұрын
I think I'm going to go with the Dillon it can do large and small primers plus I will have Dillon's customer service.
@jonstoehr1754 жыл бұрын
You'll be disappointed. Read the threads on Enos.
@lausd35624 жыл бұрын
Me wants. Thanks for the review.
@heathdedman14174 жыл бұрын
only for Dillon or will it fit any progressive press?
@richardbrouillette76902 жыл бұрын
Do they make one that you can use on Hornady progressive reloaders
@talibanking3 жыл бұрын
What if you just directly link the primer pro to the primer feed tube on the press?
@o2wow4 жыл бұрын
I just ordered one of these, they have a good bundle deal with some small primer Dillon primer tubes and magnetic collars. if you haven't already tried one, test the Double Alpha powder test die.
@Ultimatereloader4 жыл бұрын
Congrats, you'll love this thing. Magnetic die- hoping to try it this coming year... :)
@eugenejohnson86354 жыл бұрын
That’s cool not a bad price 👈👍👍
@freekshow00114 жыл бұрын
So how long does it take to fill 1 primer tube? I thought you would have covered that in the video. Also can you really call it a pro if it only loads small primers? What if you want to load large primers? Do you need a second magnetic collar to fill a second tube in the background while your using the first tube of primers?
@Ultimatereloader4 жыл бұрын
Fills in about 30 seconds! Only "need" one tube :)
@MrShanegoldman4 жыл бұрын
I ordered one.
@MrShanegoldman4 жыл бұрын
Good thing I ordered it early on. Website says sold out till February 2020
@robertschmits4304 Жыл бұрын
Does this only work for Dillon presses? I have a hornady lnl ap
@BuntMeister664 жыл бұрын
Great concept but one size and $200 is a deal breaker.
@jamessween3 жыл бұрын
Will this do large primers? And if not will it do large primers on their next upgrade?
@markhoulding19384 жыл бұрын
Hi Gavin just watching the PrimerPro video Had a thought if you can find a permanent place on your bench for the Primer Pro why not drill a hole through the bench for the tube to sit in Regards Mark from the UK
@davidunderwood36054 жыл бұрын
1st you said you have to throw away a round with an upside down primer, not, just break it down and deprime, 2nd nice unit but would most definitely be far better if it press mounted and would handel large and small. But given its small only, still very nice but really should mount to press. And with its sensory sophistication they should have taken it that one step further to press mount and only drop on an empty or half empty tube. But thats me. I would still use it. Load a dozen tubes and have them in the ready in a bench rack with a saftey shield. For the price it's in line with other coalators(yea i know spelling) that are mounted on a dillions or other progressive presses, with the expetion of lee which works flawlessly once moded inexpensively. My only other and most biggest concern would be the break down and cleaning as primer dust can build up over time and that can be dangerous. This really should be addressed.