New Rage Cycles are based in New York and turn out some pretty neat fender eliminator/tail tidies for a large number of bikes. This is their new kit for the Triumph Street Twin
Пікірлер: 188
@TheMdshooter5 жыл бұрын
I am about to purchase a 2019 Street Twin. I have to say that your channel has been extremely informative. Thank you for taking the time to do these.
@mancavemoto5 жыл бұрын
No problem
@MidnightMotoVlog Жыл бұрын
I think this is my favorite kit that I've seen so far. I just got mine in the mail. Waiting on the other parts to come in before I install.
@SachinZagade-xg4zt2 ай бұрын
Hello, great informative vdos, nice shooting and helpful commentary. Man, u r bikes are so clean and u r doing a perfect nice, neat and clean job. Great work. Keep it up.
@mancavemoto2 ай бұрын
Cheers
@GibsonSGJKL7 жыл бұрын
That's the nicest tail tidy I've seen for this bike
@nmintrasak7 жыл бұрын
Tony, thank you for making these videos. I ordered this NRC fender eliminator, and followed your instructions to the dot. Worked out nicely! Thanks for making these fantastic videos and much appreciated it. Looking forward to more videos from you.
@mancavemoto7 жыл бұрын
+Natt Mintrasak Hi Natt, thanks for your kind words. I'm just an ordinary bloke in his garage, so if these are useful for people I've achieved my aim
@JERosa867 жыл бұрын
Mine is scheduled to arrive this Friday. Thank you so much for your videos. They are very informative and unbiased. I am now following this and modifying my street twin as per your recommendations.
@mancavemoto7 жыл бұрын
Jann Eric dela Rosa Thanks! Much appreciated. I'm just here to try and offer ideas
@francesboy25 жыл бұрын
If you're curious as to how to mitigate hyperflash, you don't need to worry about buying a relay or whatever. Just hold the i button with the bike dead, and whilst holding that button turn on the ignition. On the LCD you'll be able to see 4 different modes. Cycle through the modes by pressing the i button, and hold the i button when on mode 2. The bike will cycle the fuel pump etc again and you won't have hyperflash.
@Mauroplcr5 жыл бұрын
It works whit the the turn signals but... when you select the warning signal it doesn't .
@francesboy25 жыл бұрын
@@Mauroplcr Hm that's strange, it's probably fixable with a quick google search, I haven't looked into it.
@MrBarnabeus5 жыл бұрын
The Cheshire Cat anyway for now I have fixed the dual equalizer :-)
@bharatsangha11137 жыл бұрын
They are excellent and have this installed on my Thruxton R. Super clean install and quite bright.
@mikestewart73226 жыл бұрын
Hi Tony, just found your channel a few days ago and have been following your vids. I find them very interesting and informative. I love all the Triumph retro stuff and I’m bolting on different stuff to the 2016 (air cooled) scrambler. You have shown me some very trick products and I’m loving your Street twin, it’s looking very cool with the nice and understated things you’ve done. I’m hooked to your channel now mate so keep em coming. Cheers👍🏻🏍
@mancavemoto6 жыл бұрын
Thanks Mike, glad you like what I’m doing, I’ll be trying to expand the content as the channel develops
@Gilgamesh3477 жыл бұрын
Great review. Thanks for sharing the detail not covered in the instructions! Very helpful.
@GibsonSGJKL7 жыл бұрын
New Rage also sells a Duel-Load Equalizer to go with this for $20. It slows the flashing rate back to stock by adding back the load you've lost with the removal of the stock relay.
@drithen7 жыл бұрын
Hey Tony, I noticed in your later videos you opted not to keep this tail tidy installed, I was curious why you chose not to do so. I'm really enjoying your videos, keep up the great work.
@mancavemoto7 жыл бұрын
Hi James, as you would probably guess to keep the content coming there are parts going on and off the bike all the time. So it does change frequently. Its a great piece of kit, but it does give the bike a bit more of a modern look, and I thought probably wouldn't work with the aesthetic I was going for in the long run. Thanks for your encouragement, keep watching!
@Branchofzion7 жыл бұрын
Thanks for making this. I'm waiting on one for the Street Cup. Great job!
@mancavemoto7 жыл бұрын
+Kaprina Steward No problem! It'll look sweet with the rear seat pod
@absolutelyfreshseafoodcomp78314 жыл бұрын
Ordered mine last night. How do you like it?
@parthiv19918 жыл бұрын
Thanks Mark. Just ordered myself one from the US. Excited!!
@mancavemoto8 жыл бұрын
No problem Parthiv.....who's Mark? ;)
@parthiv19918 жыл бұрын
HAHAHA! Sorry, Tony! I've been pulling an all nighter. Excuse the fumbling
@mancavemoto8 жыл бұрын
no worries, at least if it turns out to be a rubbish product i can blame Mark! go get some sleep Parthiv ;)
@parthiv19918 жыл бұрын
HAHAHAHAHA!
@parthiv19918 жыл бұрын
I'm pretty sure I am going to like it if it came from your channel. You're the go to guy for me when it comes to all this.
@detroitdizzle55137 жыл бұрын
That was very helpful. Thank you for making this video
@mancavemoto7 жыл бұрын
No problem at all!
@motobucks97707 жыл бұрын
Just ordered mine... thanks for the videos
@mancavemoto7 жыл бұрын
Moto Buck's no problem!
@klausoliveira39327 жыл бұрын
13:10 - Try soldering a 1KΩ resistor on each channel (left and right indicators). This should solve the fast blinking problem.
@maximusmax45575 жыл бұрын
If doesn't blink fast when the bike is actually running, I'd see no need to dink with resistors. Personally, I've never had much use for my turn signals with the engine off!
@guitarstud14 жыл бұрын
Thank you so much for this video! It was super helpful! 🤙🏽🙌🏽
@mancavemoto4 жыл бұрын
Glad it was helpful!
@jons81969 ай бұрын
Just installed this kit along with front LED signals as well. Looks clean and super easy on the install but had to tweak a few things as video doesn’t show a couple of harder things but overall great video. Again, The hyper flash issue is still there as only my hazards are in sync but not turn signals. I’ve tried the type 2 settings and still having issues with hyper flash - any suggestions?
@absolutelyfreshseafoodcomp78314 жыл бұрын
This was so awesome. Thank you.
@mancavemoto4 жыл бұрын
No problem
@cloud98479 ай бұрын
Hello! Love the tail tidy. I'm about to order one. I'm also looking for Rear Spool Sliders but can't find any for a Street Twin model!! Can anyone help me lolol i also am having trouble getting the bar end fillers out. I'm trying to install Motogadget bar end turn signals but couldn't get the stuff out of the ends of my bars. It's a '22 Street Twin.
@Ben10twentytwo8 жыл бұрын
Good how to and review! I'd be tempted to get some wiring loom tape and wrap those wires. I recently rerouted some wiring on my scrambler and got some from Amazon. RSM.
@mancavemoto8 жыл бұрын
Thanks Ben, yes i would advocate that too. I didnt show this in the video just for the purpose of saving time
@marcuswinton54245 жыл бұрын
Hi, very nice video! But i guess this doesn´t match with the Slammer seat from British Customs? What tail tidy would you recommend with the Slammer seat? Thank you
@mancavemoto5 жыл бұрын
Marcus Winton Yes maybe not. I’d thoroughly recommend the Motone tail tidy. That with the slammmer seat was the last set up I had and it was awesome
@stevenbattell4014 Жыл бұрын
Surely it's obvious to have all the nuts on top as appose to down where they are open to the elements and also easier to do the nuts up from above.
@mancavemoto Жыл бұрын
I replaced the bolts in the stock positions as per the OEM fitting and the bolts from the kit from underneath
@jstacks10664 жыл бұрын
Just picked up this kit. Phenomenal video, great instruction! If you have a moment, QQ: Picked up a seat from British Customs but there's too much of a gap between the LED and the seat. Any recommendations on a saddle that works well with this tail tidy? Thanks.
@mancavemoto4 жыл бұрын
Thanks. The stock and bench seat from Triumph work well with it. Not sure if there is a little modification you could make to the fender eliminator?
@stevebennett71803 жыл бұрын
Great video. I have had the NRC fitted on my Street Twin for a few years. I was told by my local garage yesterday that it wouldn't pass its next MOT due to the spacing of the indicators being less than 80mm. I'm not sure if this is total BS or not...!?
@mancavemoto3 жыл бұрын
There is a minimum separation distance of 180mm, but it’s a bit of a grey area as the MOT manual states that “there is no requirement to measure the separation distance and they should only be rejected if the separation distance is obviously incorrect” so I guess it’s down to how nice the MOT tester is?!
@rallypunx7 жыл бұрын
As usual, excellent video. By any chance do you have a side profile picture of the Street Twin with this fender eliminator kit? You can't really see this view in the video. Thanx.
@mancavemoto7 жыл бұрын
rallypunx I think so, I'll take a look
@giaxou69312 жыл бұрын
Is it at all possible to add a top box with a tail tidy (like this or similar)? I'm looking at the Givi Trekker Dolomiti Black 46lt. It requires the Givi rack for ST (SR6407) and the base plate (E251) but seems to be hiding the break light/indicators (and possibly even the number plate). Is there any way to fit a tail tidy with this topbox?
@mancavemoto Жыл бұрын
I don't think there is no
@syntaxlies827 жыл бұрын
You have reviewed the jp vintage seats for street twin. They are a little shorter I believe. Do you think this kit can be adjusted to work correctly with a jp vintage seat?
@Vincent79Vega8 жыл бұрын
great video, I like your channel. do you know if it is allowed to use this in EU from the regulations?
@mancavemoto8 жыл бұрын
Hi Vincent, I'm afraid I can't confirm the 'legality' of this part as there will be different legislation in each country.
@custom_treetswin5 жыл бұрын
Hi, sorry - watching this a couple years down the line. But did you need to install a smaller licence plate than stock? The plate fitting looks small? Cheers
@mancavemoto5 жыл бұрын
No you can get away with a stick plate, I already had the smaller one on the bike
@colindeans59726 жыл бұрын
Looks great!
@thomaslovett3183 жыл бұрын
Really helpful video. Could you let me know if you used a EU or US number plate option on this video?
@mancavemoto3 жыл бұрын
Thanks, this came with the US plate mount
@twinwheels47178 жыл бұрын
min distance apart for MOT is 180mm for indicators, that'll be from the innermost edge of the indicator.
@mancavemoto8 жыл бұрын
Hi John, thanks for this. I'm not suggesting this is wrong, but can you confirm where this measurement comes from as i cannot see any rule about distances in the MOT testers manual?
@twinwheels47178 жыл бұрын
Yep here ya go mate, www.gov.uk/government/uploads/system/uploads/attachment_data/file/366046/msva-manual.pdf
@mancavemoto8 жыл бұрын
Thanks John, useful link, but this the the standards for a MSVA test as opposed to a standard annual MOT test?
@twinwheels47178 жыл бұрын
page 6a3/1 I personally wouldn't worry about it as the light looks really good and pretty much stock, plus when was the last time you saw the old bill or an MOT tester get a tape measure out! ;)
@mancavemoto8 жыл бұрын
Exactly John, also anybody with a street twin doesn't have to worry about an MOT for at least 2.5 years. Thanks for the link though
@danishmumtaz56146 жыл бұрын
Hey tony. Just added the nrc fender eliminator for my 2018 triumph street twin. Everything according to how you said but heres the issue. The indicators work but the brake light doesnt. I connected the stock after that and the brake light wont work on that either now. Just the indicators. Any suggestions? Oh and the led license plate light doesnt work either.
@mancavemoto6 жыл бұрын
Danish Mumtaz something’s not right, have you checked the fuses to make sure none have blown?
@Hoshikoification7 жыл бұрын
Thanks for the detailed video, any plans on installing their Rage 360 turn signals???
@mancavemoto7 жыл бұрын
Hoshikoification not yet, but it might happen, they look pretty cool...
@jacobmartinsuarez43675 жыл бұрын
Hi Tony! Sorry for my English! Can you say me if this tail tidy will fit with the Jerez seat from Tamaryt? Thank you so much!
@mancavemoto5 жыл бұрын
Your English is good Jacob! I see no reason why it wouldn't work, but not having tried the two together, im not sure what the overlap between the seat base and light unit would look like?
@jacobmartinsuarez43675 жыл бұрын
Thank you so much, Tony. I'll keep thinking about it!
@aaarghwilson4 жыл бұрын
Loving your content, mate. Quick question: are there any MOT issues with this mod?
@mancavemoto4 жыл бұрын
Thanks, not as far as I know, but i never had the bike mot'd
@MAGirlable7 жыл бұрын
How is riding like this in the rain? Any spray coming up from the rear wheel?
@danvanbelk13 жыл бұрын
Will this pass an MoT I’m the Uk with those indicators? I thought they had to be a certain distance between them? Looks great though, I’m assuming it would fit on the street cup too?
@mancavemoto3 жыл бұрын
The MOT rules are a bit 'grey' on this. There is a minimum mandatory seperation of 180mm, so these would meet that requirement.....just. But the MOT guidance goes on to say "There is no requirement to measure the separation distance and they should only be rejected if the separation distance is obviously incorrect". So I guess it's down to how nice the MOT tester is?! Yes, they'll fit on a street Cup. I removed mine as although it was clean, I didn't like the look. Just a personal preference
@filmdetective8 жыл бұрын
Very good video, loving the channel as you know... Tell me, why does the bike you're showing stuff on, not have the blacked head light and speedo like in previous videos? Do you have two bike? Is it lent? Did you paint it back to silver?
@mancavemoto8 жыл бұрын
Hi, Thanks. Not sure what you mean? This is the same bike and still has the blacked out headlight and speedo....
@filmdetective8 жыл бұрын
My mistake
@mancavemoto8 жыл бұрын
No worries
@ErithacusPlays7 жыл бұрын
Hello there again, I'm planning to winter store my street twin, and trying to learn how to remove the battery so i could keep it under room temperature. Any suggestions would be appreciated.
@nicholasbarrese67454 жыл бұрын
Thanks for the awesome videos! Do you think this will work for the 2017 Street Scrambler?
@mancavemoto4 жыл бұрын
Thanks, yes it should do, but worth checking with NRC
@stuartfillingham70118 жыл бұрын
very nice informative step by step video, thanks! how does the lighting kit look in daylight? it just worries me that it may be just a little too subtle!
@mancavemoto8 жыл бұрын
Hi Stuart, It looks fine in daylight. Maybe not as easy to spot as standard indicators, but I have had a friend follow me who says its pretty clear.
@stuartfillingham70118 жыл бұрын
+Views from the Man Cave cool. I'll maybe put that on the things to do list for my t120. very nice series of videos by the way!
@mark222b5 жыл бұрын
with the gaps at sides, does dust, mud, etc. get into the space between the seat and the metal plate?
@mancavemoto5 жыл бұрын
A little bit, but not too bad
@RicardoSilva-qp4bb7 жыл бұрын
Thank you for the great useful videos. I´m thinking about ordering one of these kits. Can you please tell me if any extra fees relating customs were paid upon arrivel of the kit to the UK? I´ll be ordering from Portugal, and will have to consider the price if any custom fees are added to the kit. P.S: Would love to see this kit being used with the brat track flat seat mounted on the Street Twin. Thanks again for the videos man.
@mancavemoto7 жыл бұрын
Ricardo Silva Hi Ricardo, I did have to pay some tax, but not a lot (about 5% from memory?)Unfortunately I can't help with any info on the situation for Portugal. Thanks for your comments, glad you like the videos!
@RicardoSilva-qp4bb7 жыл бұрын
Ok. Thank you for the answer and for the great videos. Really appreciate them.
@roogarampage6876 Жыл бұрын
do you think this will fit the triumph speed twin 900 2023?
@sophiesmith36786 жыл бұрын
Hi Tony, love your videos! I don't know if you'd know but would the NRC fender eliminator fit with the Tamarit Jerez seat?
@mancavemoto6 жыл бұрын
Thanks Sophie, it would certainly fit, but I'm not sure what it would look like as the Tamarit seat sits above the frame rails with no overlap. I don't think ive seen anyone do that yet, it could look awesome
@sophiesmith36786 жыл бұрын
Ok ,thanks for your opinion. I already have the seat which I love but now desperate to sort the back end out and really like this eliminator kit. I might have to go for it and see what happens lol.
@mancavemoto6 жыл бұрын
Sophie Maycock Cool, lemme know. At least you know what the Motone tail tidy looks like with it
@Nicholasotis7 жыл бұрын
Hi Tony, Is it possible to fit the fender back on with the tail light segment in place? I want to keep the fender (ditch the stock tail light and 3D print a billet to fill that indent) and have an LED array tucked up under the seat. It looks like it would be a tight fit. Thanks, -Nick
@mancavemoto7 жыл бұрын
Hi Nicolas, not with this tail tidy unfortunately. The stock fender has recess mouldings so that it sits up under the frame rails. You could probably use it but with some very considerable modifications. In this case you may as well look for one of the flexible LED tail light strips that are available
@Nicholasotis7 жыл бұрын
Yep, that's pretty much what I figured. Thanks again for your help on this. I really appreciate the incredibly prompt reply. Cheers, -Nick
@vaidoo4 ай бұрын
Great ! Who do you think is the best looks tail tidy nrc or motone ?
@mancavemoto4 ай бұрын
I think the Motone one looks better, but its all down to personal choice.
@LeeJohns337 Жыл бұрын
Anyone know if this would fit on a 2017 Triumph Street Scrambler?
@TK-db1ts11 ай бұрын
Do you think this will work on a 2019 speed twin 1200?
@markmasztal22538 жыл бұрын
Oh those shorts...stylish.
@mancavemoto8 жыл бұрын
Thanks Mark! ;)
@markmasztal22538 жыл бұрын
That's a nice tail tidy. I wonder how much spray you would get up underneath?
@CreativeHealin5 жыл бұрын
I installed this fender eliminator but my blinkers are still faster than stock with the bike running. Hazards are normal. Any advice on how to correct this or do i just need to buy the dual load equalizer from NRC?
@francesboy25 жыл бұрын
Not sure if you've already solved this issue, but as part of the ECU you can set it to mode 2 or B (can't remember the nomenclature) and that fixes the hyler flash. To do this, hold the i button when the bike is off, turn the ignition to on and you should see on the LCD the different modes. Cycle through them pressing the i button, and hold that button when on mode 2/B.
@CreativeHealin5 жыл бұрын
The Cheshire Cat Thank you! That worked beautifully. Cheers.
@shakinsherlock666 жыл бұрын
That looks a very cool mod
@mancavemoto6 жыл бұрын
shakinsherlock66 yep
@bruno.dinis19826 жыл бұрын
Do You know if thei’r working on one for the bobber? Couldn’t find it on their site.
@deadwolfproject8 жыл бұрын
hi great video, I've been looking for this exact thing for my scrambler but I'm not sure if it's legal in the UK as I've heard the indicators have to be a certain distance away from the brake light. please could you clarify as I'd loooove this on my bike. cheers
@mancavemoto8 жыл бұрын
Hi Ricky, Thanks. I don't really want to get involved with the legality of parts fitted in these reviews, as you can imagine thats a bit of a 'tangled web' however looking at the MOT testers manual, I can directly quote the following....The precise position and angle of visibility of direction indicators are not part of this inspection, but they must be on each side of the longitudinal axis of a solo machine.Check out this link for more info www.motuk.co.uk/mcmanual_150.htm
@deadwolfproject8 жыл бұрын
+Views from the Man Cave that's great thanks
@szalczingeristvan36224 жыл бұрын
Might be a stupid question, but does this also go on the Street Cup?
@mancavemoto4 жыл бұрын
Yes it does.
@careltheron56062 жыл бұрын
Hi do you think the NRC tail tidy will work with the Down and Out Short Seat and rack kit?
@mancavemoto2 жыл бұрын
From memory, no I don't think it will, not easily anyway due to the way the D&O seat is bolted to the bike
@careltheron56062 жыл бұрын
@@mancavemoto thanks for replying appreciate. Love your vids keep it up
@jt41053 жыл бұрын
U think the gap from the tail tidy could potentially cause any problem? Thanks alot
@mancavemoto3 жыл бұрын
Possibly in very wet conditions
@jt41053 жыл бұрын
@@mancavemoto thanks! I m probably gonna duct tape the bottom.
@CYOTsNiper7 жыл бұрын
Do you get more dirt and water thrown up under the seat with just that plate for protection?
@mancavemoto7 жыл бұрын
Les Laxson yes a little bit
@AryanSharma-qq4xs3 жыл бұрын
Would you recommend this or the analog motor goods tail tidy V2 for the Thruxton?
@mancavemoto3 жыл бұрын
I have no experience of the Analog Motors tail tidy, sorry
@stevesavage51927 жыл бұрын
Does it look fine with a flat bench seat. I fear the bench would be to short. Any experience ?
@mancavemoto7 жыл бұрын
steve savage Unfortunately I didn't have a bench seat to hand at the time. They are a slightly different profile
@punkrapgirl7 жыл бұрын
How were you able to remove the tail light plug? There are 3 side where you have to push down so that you can actually remove it but I haven't been able to do it. Was there a trick you used?
@mancavemoto7 жыл бұрын
Do you mean the main connector for the rear loom? if so there is one 'tab' on the side that you can depress and they pull apart. I'll try and get a picture to show
@JonnoDoesStuff5 жыл бұрын
If the poster is anything like me, I think they mean actually disconnecting the connector that you plug the NRC connector into. Your video skips past it
@NarutoMorrell2 жыл бұрын
@@JonnoDoesStuff I just got this kit and I am having the same issue… was there an answer to this?
@JonnoDoesStuff2 жыл бұрын
@@NarutoMorrell Hi. This is a while ago but there's a plastic tab that you have push to release the connector if I remember correctly. Go easy on it
@michaelcosgrove9885 жыл бұрын
Got a question...2018 Street twin and I bought those rear shock lights from British Customs and rear fender eliminator kit. Rode a bit Na snow my engine light is popping on and off. Shows a code of 1576. Looks like it has to do something with the LED tail or turn signals. Anyone have those issues? Remedies? I’d hate to put the stick tail back on. Thanks
@mancavemoto5 жыл бұрын
There can be an issue with some after market lights. The stock ones send a signal back to the ECU if they fail and it throws up the warning light. The remedy it to fit a resistor inline on the aftermarket ones to stop this. Contact BC who should be able to sort it for you
@michaelcosgrove9885 жыл бұрын
Ok perfect! Thank you sir
@thowmaz6 жыл бұрын
"the video is now probably gonne go bllrbbblulubrrrlllblblup" xD !
@vuhoangong57385 жыл бұрын
Hello, will this set fit on the street cup? Thanksn
@mancavemoto5 жыл бұрын
Yep should be no problem
@FourthOsprey6 жыл бұрын
I installed this with the optional dual load equalizer to mitigate the indicator hyper flash but now my ABS light blinks while the bike is on. It stops after I start riding but it is still irritating. Has anyone else had this issue?
@mancavemoto6 жыл бұрын
No sorry, but speak to NRC they are pretty helpful
@PNRobo9 ай бұрын
Hi , where can i buy it ? I am from Germany.
@mancavemoto9 ай бұрын
I ordered mine directly from NRC in the US
@vanavana44875 жыл бұрын
Im assuming the kit comes with instructions?
@mancavemoto4 жыл бұрын
There are instructions available on the website.
@siamwatchaddict90726 жыл бұрын
Any Idea why the XSR900 Version has no running light function ????
@mancavemoto6 жыл бұрын
Not a clue!
@siamwatchaddict90726 жыл бұрын
Been in touch with Justin at N.R.C. Looks like I got one with a duff Diode.. He is sending me a new unit.. Very happy with their customer service...
@mancavemoto6 жыл бұрын
Good to hear, he seems like a decent guy
@bactvproduction4 жыл бұрын
hi sir may i know where can i purchase this? any websites?
@mancavemoto4 жыл бұрын
New Rage Cycles should have a list of stockists on their site
@bactvproduction4 жыл бұрын
@@mancavemoto thank you
@nicolasnieto4 жыл бұрын
Does the kit work for street scrambler??
@mancavemoto4 жыл бұрын
Yes it should do, the rear frame is tha same
@nicolasnieto4 жыл бұрын
Views from the Man Cave could you confirm with them for us? I have a 2018 this will be amazing
@mancavemoto4 жыл бұрын
Have a look on their site, all the info should be there
@amar952604 жыл бұрын
Dude will this fit for street scrambler
@mancavemoto4 жыл бұрын
In theory yes as the frame and mounts are the same. Probably worth checking with NRC though
@amar952604 жыл бұрын
@@mancavemoto Can you share the link
@mancavemoto4 жыл бұрын
@@amar95260 www.newragecycles.com
@sanghyenlee8 жыл бұрын
Does this work with triumph bench seat?
@mancavemoto8 жыл бұрын
I haven't had the opportunity to try it yet, but hopefully I will soon
@sanghyenlee8 жыл бұрын
Views from the Man Cave thanks!
@3rdEyeView837 жыл бұрын
Same question from me...have you had a chance to test with the bench seat? I want to purchase both but want to ensure there are no issues with the bench seat vs. stock.
@joshuadaniel54903 жыл бұрын
would this fit a 2020
@mancavemoto3 жыл бұрын
It should do, nothing was changed in terms of the frame or seat components
@docmarc368 ай бұрын
no one shows how to disconnect the harness.
@mancavemoto8 ай бұрын
There’s a small lug that you press in (you can see it in the video) then pull the connector apart. That’s it, very simple
@colindeans59726 жыл бұрын
Is this UK legal?
@mancavemoto6 жыл бұрын
It is, as far as I can tell from looking at MOT regulations
@colindeans59726 жыл бұрын
Thanks. I was looking at something similiar for my Street Triple but was told it wasn't UK legal. I've maybe been misinformed.
@mancavemoto6 жыл бұрын
Oh OK, I can't see any reason why it wouldn't be legal?
@colindeans59726 жыл бұрын
It's the integration element. I think there's meant to be a gap between the rear position / brake light and indicators.
@mancavemoto6 жыл бұрын
Hi Colin, I’ve heard that mentioned before, but there is nothing at all about spacing in the MOT test regulations; “Statutory indicators The precise position and angle of visibility of direction indicators are not part of this inspection, but they must be on each side of the longitudinal axis of a solo machine.
@nellaRissa4 жыл бұрын
very nice but european license plates don't fit on that -.-'!
@mancavemoto4 жыл бұрын
They should do, aren't they 210mm by 130mm? The plate I fitted to this was 180mm by 130mm, and USA motorcycle plates are 180mm by 100mm. So I thought i'd check the New Rage site and found this "Our license plate bracket is constructed from aluminum, black powder coated, and tucks up underneath your Street Twin, providing a very clean finish, as well as giving you extremely bright LED signals! Accomodates both US and EU license plates"
@nellaRissa3 жыл бұрын
@@mancavemoto dear Man cave in italy we have got square plates 180x180 , in germany 220x200 mm!