Many don’t know how some new forklifts come to the customer, but contrary to what most may think, they do not arrive upright so we must stand them up after delivery. Enjoy!
Пікірлер: 47
@JohnnyDub16 Жыл бұрын
Nicely done, many years of service ahead! Drive it on 👍🏻
@chumleelikesHoney Жыл бұрын
So wait if they used a forklift to lift it up, then how did they lift the first ever forklift to ever be made🤯
@pipofix Жыл бұрын
😂
@hakeemsd70m Жыл бұрын
😂🤣😂
@turbo7367 Жыл бұрын
😂
@costel_verde64melcu68 Жыл бұрын
brute force
@R3TR0--938 ай бұрын
Crain's
@jv-co9vc11 ай бұрын
Reach truck gives birth to another reach truck
@gtolex86 Жыл бұрын
Wow that was close…on our stand up jigs we bolt on an “L” beam on the jig to keep it from moving less…
@HASHTAG_SEDORY Жыл бұрын
Corporate has been testing out some sort of new lifting device, it hasn’t hit the field yet, hoping it does make standing up more stable but I’m use to the lifts moving around a little when we stand them up.
@NRC6134 ай бұрын
@@HASHTAG_SEDORY So what you're saying is that your gay for men
@scattman3960 Жыл бұрын
Dont miss workin on crowns!😂
@hakeemsd70m Жыл бұрын
Wow, they were that bad? I've heard some not so good things about Crowns. My old warehouse used Crown exclusively, and something was always wrong with the walkie riders.
@daffyduk776 ай бұрын
Used a Crown for a few weeks 3 years ago, not bad actually, loads of power, nice 360 mode, only thing it needed was a multi-control "stalk" like Jungheinrichs/BT-Refex/Toyota etc or the 2-stick control Linde R14s I used to work with. Would use again if I hadn't retired
@FuckSlowShit6 ай бұрын
Hyster Power
@hakeemdavis66535 ай бұрын
@@hakeemsd70m my job uses crowns exclusively too i dont see anything wrong with them
@ivancorea7229 Жыл бұрын
Crown al mighty😂
@Neminik2 ай бұрын
Is this position safe because of battery? Or you removed battery before horizontal position?
@dannyperez99175 ай бұрын
You definitely work for crown lol
@glailsonsilva964114 күн бұрын
Ja fiz esse procedimento aqui onde trabalho ninguém tem coragem só eu 😅
@JMacho-zk5dt2 ай бұрын
Cut off the straps on the pallet first….😂😂👍👍🇺🇸🇺🇸
@Unknown_OohАй бұрын
Wrong.
@miguelochoa21036 ай бұрын
I thought this was an osha videos 😂
@Wanyekerr Жыл бұрын
You work for crown?
@dirkdiggler87947 ай бұрын
Don't get the Crown hate? Warehouse went to Raymonds n they're just not as user friendly as Crowns are....
@mt10-nick665 ай бұрын
Same !! Been on crowns with a small small mix of Raymond's my first 7 years on a lift. Recently went to a place that uses exclusively Raymond and I quickly remembered why I always picked the crowns when they were available at other jobs!! These things SUCK!
@ohmaigod2Ай бұрын
Anyone else think they have way to much trust in that wooden pallet? Our new fork trucks are coming in held down by one inch chain chains thats crazy
@retroseventy5 ай бұрын
Say Hi to Mark Grages for me!
@setidepp485320 күн бұрын
Awful safety planning. It came out right this time, but it won't always be like that! Put safety first! Use a crane.
@camvvti2 ай бұрын
Staters
@haikudragon10029 ай бұрын
That sh!t will be broken down in 2 weeks
@HASHTAG_SEDORY8 ай бұрын
Only because someone will crash it.
@haikudragon10028 ай бұрын
@@HASHTAG_SEDORY exactly stupid ppl they're at every job.
@josebaltazar-rafael54922 ай бұрын
If the operators drive it without a care in the world, of course they would break down.
@haikudragon10022 ай бұрын
@josebaltazar-rafael5492 you must work in a perfect warehouse or have an assigned unit to reply so sarcastically. You know damn well these things break down for all sorts of reasons but the biggest are operator error and lack of mantinance which well is the norm now.
@AusdemNorden837 ай бұрын
Was so geliefert wird kann ja in der Wurzel nix taugen....
@HASHTAG_SEDORY7 ай бұрын
Sie arbeiten wahrscheinlich für Jungheinrich
@mr_trd21district43Ай бұрын
I own a company and just bought a new high reach and definately did not get delivered like this…. This is amateur
@kottyking22 күн бұрын
This is how you get a forklift in n a warehouse it’s very common dude
@mr_trd21district439 күн бұрын
@@kottyking u sure about that?.. thats not how i got my new forks in at my warehouse
@kottyking8 күн бұрын
@@mr_trd21district43 yep I’m sure about that, I order them for my company. Crown brings in a flatbed with the lift (cherry picker or reach) laid flat on the back on a big ass pallet. The day before they’ll bring in a skateboard and a sit down. They unload it off the truck with the skateboard, haul it to their setup area in our warehouse. Then they tip it up with the sit down counterbalance and PM the life for us.
@kottyking8 күн бұрын
@@mr_trd21district43 forgot to ask… how do they get yours in your warehouse? Do you have doors big enough they can drive in a reach with a mast that tall and damage the new tires driving it in? Even if that’s the case they still have to tip it up the same way out side…..
@mr_trd21district433 күн бұрын
@@kottyking what do you mean?….so it gets put on the truck by driving it and ive got a big transport company and got massive doors so put the roller door all the way up and then drive it down the ramp and into the warehouse and no it doesnt damage the wheels , i get all my counter balance forklift delivered same way, you all sound like you been living under a rock