NEW Release Arrma Outcast 4s V2 First Run PREMIER

[@jasondearden1394]

Great review THANKS “Diamond dust the murderer” True.

[@KalsRcAdventures]

Now one this is the guy that put it to the test. Guy always gonna keep it 💯 👌. Good or bad for the consumer. Sometimes he goes overboard but he tells it how it is for the consumer. Glad yall gave him a chance 💪🏽💯

[@ubreakitirepairit3569]

30:36 is the reason I always put grease into the slots of the motor mount assembly. Makes it easier to remove. I always do it after I wash my RC.

[@i4nic256]

Arrma: Guy, we'd love for you to test and debut the new Outcast 4S. It's Arrma tough. Guy: Hold my beer

[@rcguygarage]

💥🔥GUY THIS LITERALLY HAD ME LAUGHING 🔥💥

[@williamoleary9330]

Yeh man another channel not afraid to take this to a skate park and dirt/sand areas so we can see what this V2 can and cannot do. Thank you for this!

[@tyrellcorp2118]

It rips! A seized motor bearing is a common problem, especially in fine dirt. You have to prevent dirt from accumulating. Sealing the bottom of the power module with furry Velcro or cutting a hole in the chassis to let dirt out are the main solutions. The seized bearing may have contributed to the high temps. RC Driver Online had the same problem with the driveshaft, but said Arrma was aware and fixed the cause.

[@Victic005]

Never had one failed on me.

[@robertshaw5326]

sweet running guy i ordered one gotta have it now my wife will be upset because im broke keep rippin guy!!

[@riffraffsrc]

Looks great, I'd take this over the 8s Kraton any day of the week. I had to drill out my body post holes on my Big Rock too. Way too tight. I must be old school but as nice as these new arrma rigs are I liked them better before the buy out lol. My old pre buyout Granite bxl is still awesome. Wheelie beast. Great video brother 💯🤜🤛🔥🔥⚡⚡😁👍🇺🇸

[@P.Trick93]

Now RC Guy Garage is even 16 to 17 percent more Savage

[@rcguygarage]

Around that much😂🤣

[@rctd3260]

He's having 16-17 percent more fun than he usually does.

[@restinpiecesrc5528]

Looks like a lot of fun, awesome you got one GUY, wanting to see you impressions of it

[@Frolf25]

Hell yeah man! Can't wait. I'm eying up the blue outcast as you can tell by my profile pic 📸

[@FLPatrick1095]

Looks to be the popular choice, hope you get one :)

[@jasonkraus7442]

Looking forward to the Live bash, Guy. Waiting to hear your honest opinion before I pull the trigger on getting my own Outcast or Kraton 4s.😁😁😁😁I hope it gives you miles of smiles. Bash on, brother!!!🙃

[@mact153]

My big rock motor bearings are still ok after over 40 runs but the back of the motor can did fall off last week, nice run👌

[@earlmoorhead5555]

The bearings issue is one thing what about the axle is what really has me worried as I was hopeful this time arrma got that problem fixed 🤔time will tell 💪🔥

[@BeardRubEnjoyer]

Thanks for sharing your experience. I had the same pin issue on the 3S Senton and Vorteks. Hot Racing clips fit the Senton perfectly, but Vorteks has fatter posts. I didn't think to drill the holes out, good looking out!

[@kenneth4098]

Great review 👍 I bet no one else does what you just did good info

[@2040RC]

Nice and impressive car, love it is a beast, nice to watching video....good job!! Hope to try it soon.

[@drivenrc]

Let me just say your intro video was amazing! My favorite part was watching your son run his car straight into the woods lol…hopefully no RC cars were harmed during the intro 😂

[@rcguygarage]

Drag racing the Traxxas Maxx V2 vs the Arrma V2 😂🤣

[@blacksheeprc8113]

Their dad is awesome man that you got sent one dude I'm proud of you bro hell yeah

[@Macgyver46]

Ok only after 15 minutes I want one. Hearing you laugh just sold it. Now to sell a kidney to buy it 😆

[@GaveitagoRC]

Awesome stuff mate. I'm super jealous! I'd love one of these and waiting is always hard 😅 Congratulations on the new rig, enjoy champ.

[@rcguygarage]

This thing is MINT so far

[@GaveitagoRC]

@@rcguygarage it definitely looks it. The fun of the rig came through in your video 💯 As I sead I'm super jealous 😜 At least for now I can live it through your videos 🤗

[@rcguygarage]

@@GaveitagoRC there's LOTS coming

[@GaveitagoRC]

@@rcguygarage cool, I'll check them out for sure! 🤜🏻🤛🏻

[@runnerbaba]

I dont run such big lipos. More heat and more weight. 5000mah is enough. Temp check, Lipo switch, and next run.

[@rcguygarage]

Nice👍💯

[@Rusty-Metal]

Melts the car like a trashbag! You beast! 8k mah pack. Way too large. That thing needs a break. Too long of run time for it with no cooling time. Maybe with high end electronics, yeah.

[@joshuaheintz4657]

Looks like you are having a blast!!!!!👀🏎😁

[@rcguygarage]

TOTALLY

[@EXTREMERC416]

Drilling a slot under the chassis would help imo thats what i did. I serviced my kraton 4s motor bearing twice more regularly than i do with my 6s. Its just how the car was designed and you must keep an eye with the front bearing.

[@truerc]

Congrats. Good to see some upgrades. Still dumbfounded by the plastic pivot balls.

[@kenneth4098]

It's good you stepped up on music 🎶 Cool 😎

[@rcguygarage]

You have to know it's tough picking music out right because music that I would choose would be Static-X, Korn and Godsmack and that's not necessarily everybody's cup of tea

[@MrtipRC]

Nice video and I ordered both , 3s Typhon and 3s Infraction all on the way

[@P.Trick93]

Is there a new Typhon 3s as well jesus i cant keep up with all the new releases

[@johnnyhaberfield721]

Still love the version one.had the same heat issue ,motor plate wise.CRCU plate stayed proper straight,and didn't reach bending metal temps.✌️

[@Hoosierdaddyjones812]

I just ordered this same one and another 6s outcast for 10 dollars more then the 4s was lol. Tower hobbies has some sweet scratch n dent sales going on right now.

[@EJ-74]

Love the Outcast 🔥 That thing rips 👍 I used to put zip ties on my body pins, gives ya something to grab Hell of allot easier to find also. lol Nice bash Guy 🔥👍✌️

[@rcguygarage]

Great idea

[@chadbiermann3380]

That was a great rip Guy!! All the way til it wasn't!! That was a lot of dust in the slipper housing!! I cut the slots in my 3s trucks. Seems to work well for letting stuff out of there. Any fine dust that gets inside the chassis will eventually work it's way in there when your jumping and doing wheelies all the time. That truck was handling the jumps and bumps really well I thought!! 💯💯😀😉

[@ThrillFPV]

do not drill out your body posts they are not the issue. Stretch the pins with a flathead or pliers whatever u have. simple fix and less damage.

[@HJESR]

One guy posted a vid we’re he added a slot to release the Dupree

[@frankasus2010]

I have senton with blx 2050kv brushless I running in the beach and have this problem a lot the sand inside the motor, I clean put oil in the bering and make a hole in the chassis never had the problem again

[@Johnwick-ed7vo]

Production models will have this issue fixed, it is a known issue the drive shaft issue

[@rcguygarage]

Yes it is known 😂 and Arma is said to already have the fix🤫😂🤣

[@henryfoster3212]

I think the new Outcast need a little more work done to it but don't worry the guy mechanic is on the job🔧💪

[@KevinFox-fj6mp]

Same stuff as the 3s power module. Either seal up the gearbox or cut a hole in the chassis to let the dirt out…..or maybe both. Fuzzy side Velcro works pretty good to keep out the dirt. Apparently the o-ring on the drive shaft is a known issue that Arrma is resolving before 1st shipments. Need to do something to keep temps in check….way too hot!

[@rcguygarage]

MORE COOLING

[@tyrellcorp2118]

@@rcguygarage I think the seizing motor bearing may have something to do with it. A lower kv motor will reduce temps much more than any change in fan.

[@rcguygarage]

@@tyrellcorp2118 yes I've checked out a couple things

[@Wotup72]

I really appreciate you doing 16-17% more Demon voice! Thanks 👌

[@rcguygarage]

😂🤣😂🤣

[@i4nic256]

I toasted a couple of spur gears on my Big Rock because of the same problem. Arrma should have already cut the slot in the chassis to allow debris out or found anther fix by now because this is a known issue.

[@rcjunkie260]

Motor bearing is toasted. Not that their was ever a problem with arrma 3 and 4s brushlessmotors.

[@lukerecore3211]

And i live in Massachusetts so the weather here is crazy.

[@whatsintheboxx]

What a cool video. You really put some work in it. I’ve been really enjoying watching it. I really want the new outcast bad. But I think it should have taken this kinda abuse, it was no hardcore bash. Kinda disappointing

[@andrewtexiera2858]

I had some crazy binding with my outcast 8s exb turns out they didn’t put a bearing on the right side of the front diff cup

[@RCvapor]

Cool video saving my pennies for one of these 👍

[@michaelhimsworth6512]

I so want to pre order the v2 4s, I'm in the UK so not available till the 30th😞 all ways good to have your opinion 👍

[@raresttortoise]

I’ve pre ordered the kraton and expected delivery is 2 august

[@B2Humla]

Had a 3+ houres bashing session with my HPI Trophy Truggy nitro today. Could stayed there even longer but the sun was hot today also in Norway. Nitro is still smoking. But this is some of the problems I also had with my Big Rock 3S. I prefer the 6S cars. That motor mount and that slipper, I just dont like it. Also the steering module I think is to loose, to much play in the parts. But... ok price and it sure goes fast and good when its work 🙂👍

[@somedude3601]

Sanding the coating off the body clips make a tight but smooth fit.

[@rcguygarage]

I can barely grab onto the pin with my sausage fingers and you want me to SAND THEM😂🤣😂🤣 now you better have laughed about this comment

[@somedude3601]

@@rcguygarage 🤣

[@Sixbillion1]

Well if there’s anyone who will give this thing an honest bash and review on the tube without trying to drop it from a helicopter “test” , it’s you 👍🏼

[@rcguygarage]

😳Ummm 😳 DAMMIT how'd you know a heli was involved????

[@Sixbillion1]

@@rcguygarage well its a great video, and the spot is awesome and perfect for running these kinds of vehicles, however, i am still very un impressed with arrma durability. i dont think you were bashing it hard enough to cause any issue for the money you pay for these things. sure it performs well, when its working, but theres always something with these arrma vehicles.

[@rueagonvyceratops2879]

seeing all the gears and all . i will be getting all this for the 3s blx typhon. and getting rid of the crappy hd plastic output gear and ring gears.

[@MrJaleho]

Yeah.. nice music man :)

[@rcfanboy4264]

car looks awesome \

[@AlexHT100]

Hey Tim/Sasquatch hunter! So another one bites the (diamond) dust… been waiting to see if my £ go on this 4S instead of the Lasernut I fancy!? Maybe I can follow my heart and go Losi after all? ❤️🤘

[@nezzysrcadventures1256]

I already pre ordered it for the 22nd

[@wallacengineering8096]

Arrma is apparently already aware of the issue with pins falling out. Other reviewers already reported it. RCDriverOnline said that Arrma has already revised the little stell bands on the driveshafts for production models and will be changed before they ship. Ya its been known for a while now on all the Arrma 3S and 4S trucks that you should drill out the body posts one size up. Find a drill bit that barely fits through the clip holes and then go just one size up, if the bit barely wont fit through, then its the perfect size, go ahead and drill it out. That and the getting rocks in the servo are normal. Little annoyances but overall I love my Big Rock V3 and can't wait for my Kraton 4S V2 to show up in the mail! Finally the feature set rivals the Traxxas Maxx V2! Ive got some lightweight SMC Racing LCG 6000mAH 100C packs thats will probably be perfect for these trucks.

[@monsterrc1681]

Nice guy that’s how you do a unboxing tear that SH$t up lol

[@lukerecore3211]

I need ur help guy, im going to get either a granite 3s v3 blx or a big rock 3s v3 blx. I know that u have driven both of them, which one would u buy?? This is my first hobby grade rc and in kinda a noob. And i like all around fun, like driving through grass and drifting, im not to much of a big jumper but I do like to jump. Plz tell me which one i should buy??

[@rcguygarage]

Both are great but because you said drifting I'd go for the big rock before I completely read your sentence I was saying granite.

[@lukerecore3211]

@@rcguygarage Thank u Guy for the advice. And im going to the Foxborough hobby shop, the one from ur videos.

[@lukerecore3211]

@@rcguygarage I wonder if I could get a discount just by mentioning ur name to the guys. Lol.

[@rcguygarage]

@@lukerecore3211 Horizon doesn't like me very much 🤣😳 So if you mention my name they might tack on 10% 😂🤣😜

[@lukerecore3211]

@@rcguygarage Lol good to know, but im going to hobby quarters.

[@fiatfixie4344]

Electronics got so hot on my 6s today that even the chassis was very warm to the touch. It's like every piece of metal the motor has indirect contact with acts as a heat sink.

[@rcguygarage]

Yes pulling the heat is good

[@fiatfixie4344]

@@rcguygarage Just saw the RC driver online vid. He had the exact issue as you with that shield on the universal failing. Supposably it's a pre-production issue Arrma knows about and is correcting...

[@rcguygarage]

@@fiatfixie4344 yes they are but for me at the time of filming I was unaware. Next run video I think I mention it. There's TONS of footage and even if I had to buy this thing I would it is that good it does have minor little tweak issues but those can be combated the way the vehicle handles and maneuvers is exactly the way I like to run

[@fiatfixie4344]

@@rcguygarage Like a best of both worlds thing. Precision and sharpness of 3s meets power to weight of 6s. 👍

[@crazyivan512]

I think for me I would leave it 4S unless I turned it into a speed ripper, at 4S it seems like its plenty powerful enough for mild speed runs and some off-roading

[@rcguygarage]

6s ESC will just work less for power gains on 4s👍💯

[@crazyivan512]

@@rcguygarage ahh,.. you meant just a 6S ESC... I gotcha now.. 👍

[@fergsrcenjoyinglife352]

Is arrma coming out with anything new this summer 2023

[@wasa7]

It’s a good job it’s not due in the Uk yet, I’ve spent all my cash on speed running 🤣

[@nezzysrcadventures1256]

Nice video brother I subbed ya!!!!

[@rcguygarage]

👍💯🙏

[@bryanharness1122]

This or another maxx I was wanting to try an arrma but man they break alot it seems from videos I've watched anyways. My maxx has been awesome

[@rcguygarage]

This one has been well documented on my channel and is my TOP PICK OF 2022 even against the Maxx V2

[@johndorff2600]

Bravissimo

[@Luke-en2tk]

The driveshaft issue is supposed to be being fixed before official release, looks like most the other issues were caused by too much heat. Also all the loose dirt getting in everything not helped

[@rcguygarage]

Yes they are very well aware and I hope to see the resolve for the purchased units👍💯

[@randythompson1723]

Is it 16% to 17% better than V1?👍👍

[@rcguygarage]

This is unknown as I think I said that I never had the original but what I will tell you and you're only hearing this through this text messaging app I REALLY LIKE THIS THING

[@randythompson1723]

@@rcguygarage It looks like you were having a Blast with it.

[@-gh6694]

The body clips are 16% to 17% larger...

[@kenneth4098]

Is the spur gear still or plastic

[@rcguygarage]

Metal

[@chefbeardsly]

i need to come to diamond dust

[@whatsintheboxx]

Thinking the same. Let’s meet there for a huge bash 👍

[@s.h.1095]

Yeah body posts on arrma do my fingers in 🤣

[@rcguygarage]

😂🤣

[@johnnyhaberfield721]

Beans on toast.✌️

[@kennethmeyers5008]

Nice

[@jim3041]

godamm that music's loud!

[@rcguygarage]

Good thing you control the VOLUME 😜

[@Fpsnut]

Stock pins are so tight it's infuriating, I would pull and yank on them until ripping them completely off. Finally got fed up and used 5/64 drill bit to make holes a bit bigger and now it's pretty effortless and smooth. Blows my mind that Arrma can't even figure out the right size hole for body pins.

[@rcguygarage]

RIGHT😂🤣

[@-gh6694]

Use smaller clips!

[@ThrillFPV]

just bend the clips open lol why does noone understand the hole is measured and the right size... they wouldnt make an rtr with pins that didnt go in. if they went in once its not the whole size.

[@Fpsnut]

@@ThrillFPV It is the hole size, I own multiple 1/10 arrma cars and every single one was too freaking tight. It works ok on first few tries then starts seizing up. In the video you can clearly see it starts jamming after a single use. They make them so tight any temperature change or a spec of dust will deform it enough to where it seizes and won't want to let go. One time after a good dirt bash with Big Rock, I had a clip completely unbent pulling on it so hard I thought I was gonna rip a body post off. After using 5/64 drill bit, it's smooth as butter. I also own Losi car and have absolutely zero problems with clips. Looks like team Losi figured out how big of a hole size they gotta have to not have issues, but it's too big brain for Arrma crew.

[@puddlejumpernva]

I would be willing to bet that the wrong body clips have been installed at the factory, just like the V3 3S vehicles. Get the correct ones, part number AR390165 and they will slip in and out just fine. The ones installed are AR390178 and are meant for the 1/8 scale vehicles. The 390165s are meant for the 1/10 scale.

[@Naginc]

My guy! Very nice video. So I currently have Notorious 6s, Kraton EXB 6s, Big Rock v3..Give me a solid bro..Should I pre order? And do you think Arrma has a new 6s line coming?

[@rcguygarage]

🤫I would buy this with 6 own cash if I had to. You'll see why. Couple minor things but the smiles for miles is INCREASED by at least 16-17% and I'm leaning towards the 17%

[@Naginc]

@@rcguygarage Of course! I should have known..17%-18% more fun! Lol

[@truthbetold916]

Sports field grass is pretty rough. You get so much traction its hard to steer and all the little bumps working the suspension while the tires are breaking loose and getting traction is hard on the drivetrain. At least in the sand you break traction easily and when you crash the sand is soft lol.. 4s is fast enough to have fun without a lot of damage but is never enough knowing 6s is 25% faster!!! And then you upgrade to 6s and do standing flips and break everything!! Rc hobby is more the enjoyment of working on/fixing them to go outside and "test run" with a 60% chance your going to break or crash it!! 😂

[@rcguygarage]

Living on the edge you can have yourself some fun

[@rcjoe406]

Magma lol....I think the extra money for the 6s is more the direction I'm thinking of heading or maybe a maxx v2

[@rcguygarage]

Hmmm you have inside info to my content???? Are you a hacker?

[@rcjoe406]

@@rcguygarage I wish then I would hack hobbytown and get one of everything they sell lol

[@TheAdventuresofWally]

smash that like button on your way out

[@krunoslavbenko690]

Wtf new one already ? That's why I stay on 6s talion and outcast...

[@michaelgarland579]

I get rocks in my steering all the time bro I live on gravel road all arma rc do it Traxxas doesn't have that problem and with the motor gets hot it seized in it happens to me got watch temps

[@Enduroger]

This video was more than 16-17% longer than the other Arrma 4S videos. 😁😁

[@TheToecutter69]

Piece of magma😂🤣Awesome vid guy! 🤘🏼🤘🏼

[@MrtipRC]

That fine sand and dust killed that motor etc

[@gowerski]

ah the perfect sized rock strikes again

[@rcjunkie260]

No need to drill the body post. Just stretch open the body clip a little. Hole is big enough, the body clips are to tight.

[@rcguygarage]

For me stepping up the hole size and leaving the clip closed works great where I run RCs 👍💯

[@rcjunkie260]

@@rcguygarage on one of my kids Granite trucks 2 clips fought even after drilling post. Body clips would not open. Had to stretch open a little.

[@Victic005]

It's not the bearings, it's the motor winding. It got too hot, and the insulation melted.

[@rcguygarage]

Hmm 🤔 I did take this motor apart in another video👍💯

[@Victic005]

@@rcguygarage didn't see that video. The ESC didn't shut down early enough to save the motor.

[@rcguygarage]

@@Victic005 the ESC didn't need to it just supplies power. It did a great job but that motor bearing didn't. 👍

[@Victic005]

@@rcguygarage motor bearing rarely fail. You got lucky.

[@rcguygarage]

@@Victic005 yes I've had this issue several times with the motors pinion side bearing. Depending on degree of failure some are definitely easier to repair for sure 👍

[@27pugsly]

One trick I do for those stupid body clips is I take my car key 🔑 to pry them off such a pain getting them in and out

[@superstatus2640]

Im not a fan at all of the Outcast body. I think it looks hideous. Funny thing is that i absolutely love how it looks on the Infraction lol

[@nofreerides7033]

That dust almost looks like sand blast material… I like the abuse vids but don’t torture them GUY …😐😐😐 one run and cut short ima definitely wait as long as it takes to get my own … cool new jump spot though … great footage 👍👍👍

[@rcguygarage]

BLACK BEAUTY super nice stuff

[@nofreerides7033]

@@rcguygarage for sand blasting 😳😳😳

[@rcguygarage]

@@nofreerides7033 Yes enclosed respirator it's back when I was in Auto Body used it all the time 👍💯

[@ronniecreason7870]

200° will make any RC motors Seize up

[@rcguygarage]

I guess the fan is too small then😂🤣

[@rueagonvyceratops2879]

just a new rc truck , i will never be able to affdord a day in my life , and im 47 now , yay for being poor in a entire family of poor , when its living good and not in a crappy ass trailer we can not repair , no one in the family can.

[@laddridgerc3828]

Name of song??? 0:00

[@rcguygarage]

If you play it and ask Google or Siri I think it will tell you cuz I don't actually know the name but it's a good song isn't it

[@laddridgerc3828]

@@rcguygarage it is a very good somg

[@ThatCrazyRCGuy67]

No way you got one?

[@rcguygarage]

One what?

[@ThatCrazyRCGuy67]

@@rcguygarage outcast 4s v2

[@rcguygarage]

@@ThatCrazyRCGuy67 could be SMOKE Ñ MIRRORS guy 😳🤣😂

[@ThatCrazyRCGuy67]

@@rcguygarage I will have to find out....

[@michaelkowell7106]

👍💯

[@HJESR]

Arrma Junk! Looks good but not long! Good luck with Horizon..

[@rcjunkie260]

8000mAh is just too heavy. 5200mAh, 6000mAh max.

[@rcguygarage]

Max capacity fitment👍 no need for foam pads👍 HEAVY PACK 👎

[@TheSpeedrunRookie]

🤙🏾

[@deontay79ify]

Lol pretty weird they sent u one

[@russc7158]

get some sand paddles man

[@rcguygarage]

🤣😂 now THAT would KILL this thing

[@russc7158]

@@rcguygarage lol gear it down

[@mikegregory8917]

Come on Tim diamond dust no good for rc cars…

[@rcguygarage]

As said "DIAMOND DUST the MURDERER of RC CARS" 😂🤣

[@randall4411]

Cool place to bash but it'll eat your RC . I've seen Arrma's take more bashing than that . I have one .

[@twanmcnasty4012]

3s?......

[@rcguygarage]

4s?

[@twanmcnasty4012]

@@rcguygarage I wonder if 3s with a gearing change would be The Sweet spot on this thing

[@rcguygarage]

@@twanmcnasty4012 see all you had to do is just add a couple of words and then I could understand 🤣😂🤣😂 I couldn't figure out if you didn't know I was running 4s and maybe thought it was only three 🤣😂

[@twanmcnasty4012]

@@rcguygarage I know man I'm sorry. but man that thing jumps good I was loving watching you watch that thing....

[@rcguygarage]

@@twanmcnasty4012 I'm telling you that's just the half of it people just aren't seeing yet because of how I do my videos how much I actually like this truck and that I am impressed and yes it does piss me off that a couple of things were or are screwed up and it's a simple remedy and it's a learning experience don't take your brand new truck that you haven't even pulled the trigger on throw a honking battery in it with max power run it full trigger for 20 minutes without stopping is going to net couple issues 🤣😂🤣😂🤣😂 but that's the way I do it cuz then for myself I can see okay this didn't work what do I have to back off from if any