Get your AUXBEAM Panel Here: shrsl.com/3qdzv Use 12% Discount Code : DONS linktr.ee/donslife - Links to all of my products and discounts
@frederickstirtz64292 жыл бұрын
Oh yes! Finally a DIY channel with clean installs. Clear video quality and angles. Thank you for taking the time to do this. Gained a subscription 💥
@Donslife2 жыл бұрын
Happy to be of service! Lots of videos over the past couple years. Hopefully they are getting better 😂
@GordonStevens722 жыл бұрын
As always, excellent step-by-step walkthrough as well as post install feature demonstration is greatly appreciated.
@Donslife2 жыл бұрын
Glad you liked it. It takes a long time to film 😂
@jlj2092 жыл бұрын
Nice Job, Don. I just bought this unit for my 2019 Tacoma. It arrives tomorrow and I wanted to jump right in cleaning up all the wiring that some unprofessional professionals left excessed of tangled up under my hood. I've watched a few of the tutorials/reviews for this product and found that yours was presented the clearest and most helpful. Thank you, sir.
@Donslife2 жыл бұрын
I appreciate the kind words
@donearl66752 жыл бұрын
i install that in my truck 3yrs ago.it works and held up great...and i live in a cold and snowy area like you🤣👍❗
@CoastalBoating2 жыл бұрын
Just got done putting this switch in a 2022 refresh with the Duramax. Everything is the same, except getting through the firewall was a pain in the butt. The air intake tubes block it. Removed the first elbow, and access was still tight, but I got it... if you remove the back part of the intake hose, it wouldn't be too bad, but that seemed like it would be more trouble than it was worth. Oh, and finding the wire was a little challenging in the cab. I don't know if the 2022s have more sound insulation, but I had to dig for it.
@freddynigoche83102 жыл бұрын
I have a Auxbeam and a light bar just like that, I want to learn how to install but I’m having trouble. So I cut the wires like you did in min 14:22 but I don’t know hot to connect to the box which wire goes to negative and positive since it’s it has a red blue and white wire, it’s also a RC led light bar with DRL
@bradleyetherington97662 жыл бұрын
First Purchase HERE
@Donslife2 жыл бұрын
The cord was long enough. The only cutting of wires was my light bar switch
@MudBeaner Жыл бұрын
Finally something cheaper than the switchPro
@chadkauffman27442 жыл бұрын
Don your incredibly smart!! All your work is impressive 👏 your a great DIY! 👍 thanks for your time chatting with me too!
@Donslife2 жыл бұрын
Happy to help Chad!
@emd6456 Жыл бұрын
Prefer the replaceable relay version, easier troubleshooting. Also if relay fails you can swap positions to put the circuit back in operation. Relays fail, I like the option to replace. I would not like to replace the whole relay power unit because (one) potted relay failed. They should keep the previous (old) form factor and add the RGB/Blue-Tooth features. Don, great videos. Thank-you!
@Donslife Жыл бұрын
Thanks for sharing! Weighing the pros and cons as you research what works best for your project makes sense
@tom73055 Жыл бұрын
I like how you responded to his video . Great to see someone thinks lie me . I also would like to know if this company will provide any help, customer support and is in the USA most importantly this system is not waterproof from what I can see I put my money on Finex 4200 mini controller made in the USA, they provide lighting equipment for fire, police and public safety
@tom73055 Жыл бұрын
Thanks buddy for your vid but I’m still looking for quality waterproof system
@adamhamill46372 жыл бұрын
Just wanted to point out that there is also a firewall penetration on the pasenger side as well. Might be a little harder to access from inside the cab though depending on the size of your hands.
@Donslife2 жыл бұрын
True! I used the passenger side one for my onboard compressor auxiliary circuit. Either route, I found them both difficult 😂
@Lonewolf_Will2024 Жыл бұрын
So, Don quick question, on the driver side, penetration can you give a little input how or what did you use to get it through the fire wall?
@ChrisDIYerOklahoma2 жыл бұрын
Hey Don. Betcha that truck will soon be able to make coffee in the AM before too long with all your DIY mods! Hahhaa...nice work (as always)
@Donslife2 жыл бұрын
Great idea 💡!
@stevejobbs38372 жыл бұрын
I made me some wheel lights out of a 5 gal bucket and the 5050 leds and they work perfectly
@edgards2 жыл бұрын
Thanks for this video, great install and demo, definitely a good investment to slowly add accessories to your vehicle, gonna do this on my 4R.
@Donslife2 жыл бұрын
It has been a great solution for me so far. Filled up 7/8 spots!
@edgards2 жыл бұрын
@@Donslife can you list all of those 7 items? Just to see the possibilities?
@Donslife2 жыл бұрын
Light Bar Light Bar DRL (White) Light Bar DRL (Amber) Rock Lights On Board Compressor Pod Lights Interior ambient LED lighting
@Donslife2 жыл бұрын
Videos for all of these on the channel
@ronhinkley3930 Жыл бұрын
Nice option. I just had the OEM Up Fitter switches put in, but this looks like a cool option, too.
@Donslife Жыл бұрын
Thanks. I have both now! No shortage of switches 😂
@greatlakesbowhunting30072 жыл бұрын
You should add dual roof ditch lights next!
@Donslife2 жыл бұрын
🤔
@mikee23982 жыл бұрын
We'll done video. Great production value
@lalok9912 Жыл бұрын
If you leave the light bar on in the switch panel and you turn off you engine and you turn on the engine back on the lights are on or you have to press the on button in the switch panel to turn them on again
@Donslife Жыл бұрын
If main power is cut from the panel, everything is off and has to be repressed. You can wire it up differently of course. After this video I added a wireless remote that can turn it on regardless if the truck is on or off too
@jkeeven2 жыл бұрын
Great video, this honestly sold me on it.
@Donslife2 жыл бұрын
It made sense for me and has been working well
@MrColdcloud2 жыл бұрын
Great walk thru, appreciate it!
@Donslife2 жыл бұрын
Absolutely 👍🏼 Glad you like it
@paulblack56792 жыл бұрын
Excellent video Don!
@Donslife2 жыл бұрын
Thank you Paul!
@elvisdutan9246 Жыл бұрын
I would like to see the video from where you took the power with the ignition switch thanks
@Donslife Жыл бұрын
Since most of the viewers don’t have the same vehicle, I left it open ended for the ignition trigger. But I did make a video following up: kzbin.info/www/bejne/l4ealqxraZZomqs
@jakelbz1644Ай бұрын
What kind of compression is that that fits in that front quarter panel?
@DonslifeАй бұрын
AirLift wireless compressor. I’ve made videos for the installation
@bankruptseeАй бұрын
Indoector gadget truck lol. Nice install
@DonslifeАй бұрын
😂 you have no idea. This is an older video too
@PeterKnagge Жыл бұрын
Thanks for taking the time to go through the app. Many videos and still no one has demonstrated the app as clearly as you have. Is the app compatible with android auto? (Disregard, I now know you mean something like carlinkit.) Im looking for a replacement to the CTS2 powerswitch.
@erwinolson80452 жыл бұрын
Don - loved the video and the step by step install directions. My AR-800 arrived yesterday and followed your video and the supplied installation brochure supplied by Auxbeam. Unfortunately, despite everything being hooked up correctly I cannot get the control box to turn on and illuminate. I tried to reach Auxbeam for assistance but to no avail, and they don't have any Q&A or Troubleshooting links on their website, or none that I could find. My 2016 Toyota Tundra has LOW PROFILE mini fuses, so I used the supplied fuse tap, which is designed for mini fuses, and replaced my 10 amp low profile mini ignition fuse with a 10 amp mini fuse. The supplied fuse tap seems to fit fine into my truck's fuse box, and even with replacing the truck's 10 amp low profile mini fuse with a 10 amp mini fuse the truck started up just fine. I haven't hooked up any accessories yet, but one would conclude the control box should display it is receiving power with or without any attached accessories. Do you think the issue is using a fuse tap with mini fuses instead of LOW PROFILE mini fuses? Any troubleshooting ideas?
@Donslife2 жыл бұрын
Sorry just saw this message. KZbin flagged it as spam. Have you tried bridging the trigger wire to the main power lead just to test it out for power. That small trigger wire is on a two prong pin. Maybe the other side is live. Just making guesses in the dark
@donjelonek811510 ай бұрын
Good morning, For the wiring of the RC light bar. I notice u cap the red wire for the switch, at 14:29 of video {New Switch Panel Auxbeam AR-800} that being said..... you run the WHITE wire into the positive terminal using 30 amp location on AUX box and then the BLUE wire into positive terminal of next switch over ? Using the 30 amp switch right next to it ??? Lastly, do you connect the power leads that come with wiring harness for the light bar or just burying them ? Thanks Don J
@MrHelipilot2 жыл бұрын
What’s your next lighting install now?
@Donslife2 жыл бұрын
Maybe the Strand. Any other suggestions…I have some ideas
@Juddmann0072 жыл бұрын
Underglow kit!! But it has to light the entire area under the truck and hiding the lights is the key! I hated seeing the neon and led strips.... took away the whole effect. Bright white to match the light bar and running lights. All other colors optional lol
@Donslife2 жыл бұрын
@@Juddmann007 I have been looking. I also do prefer the glow and not being able to see the bulbs. So much junk out there, I have been having trouble finding some that look like they’ll survive 4 seasons.
@Juddmann0072 жыл бұрын
I ran a set of streetglow neons back in highschool but on a car. Not sure if they are still around or even make neon tubes anymore. They held up through several winters and were brighter than any led strips ive seen
@tmyers53002 жыл бұрын
I'd like to see ditch lights!!
@jgyrwa Жыл бұрын
You have a compressor on your truck? Any video of the install?
@Donslife Жыл бұрын
Here’s one: How to Install a Wireless Compressor for your Air Suspension kzbin.info/www/bejne/pn2mepyXq9Z-qqc Later on I add an auxiliary air line too
@viralinfection7861 Жыл бұрын
Any chance you could make a reel or shorts about which accessory you have in which slot?
@Donslife Жыл бұрын
My Community page here on KZbin and my Instagram both have a picture with labels that can help you out
@Arthurmd224 ай бұрын
Any sealant needed where you cut the rubber portion of the firewall?
@Donslife4 ай бұрын
Not really. I mean you could but the chances of water or dust getting in is highly unlikely
@hj7993 Жыл бұрын
Great video and clean installation. In regard to the compressor, how do you deflate/flate the tires pressure?
@Donslife Жыл бұрын
Without an auxiliary tank it is slow, but possible: How to Install an Air Line in Your Truck! kzbin.info/www/bejne/iJnUpHxqg6hlqLc
@sekmeas8 ай бұрын
Great video instruction. I see that you connect the remote wire to the ignition. Does that mean you can only turn lights on when the ignition is in "on" position? If so, is there a way to bypass that and give you the ability to turn the lights on without turning on the ignition?
@Donslife8 ай бұрын
This video should help: Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@Bward216 Жыл бұрын
What was the noise when you made the light strobe?
@Donslife Жыл бұрын
Without rewatching the video, probably the relays clicking on/off rapidly
@skm9420 Жыл бұрын
This really helped, you made a good video
@Donslife Жыл бұрын
Glad you think so!
@RTB13685 ай бұрын
You still need to have the actual controller hooked up to use the app though?
@Donslife5 ай бұрын
Correct. The App communicates with the controller via Bluetooth.
@offroader4715 Жыл бұрын
Wish you would’ve shown were the wire comes through under the dash!
@Donslife Жыл бұрын
There are two circular grommets on the firewall. One on the driver’s side and passenger side. They are made out of rubber and need the end cut open to pass wires through. That’s what they are there for. In some of my videos I show them
@ElChileno420 Жыл бұрын
Please someone help been trying to find this information everywhere. I have auxbeam light bar that has a power button and a toggle button to switch from white amber both and stobe would this allow me to turn them on and switch in between the different modes? Thanks
@Donslife Жыл бұрын
It would have to have each feature (wire) hooked up to separate switches on the Auxbeam panel instead of using the switch it came with. Then you would program each switch to behave how you want it to (on/off, momentary or strobe)
@ElChileno420 Жыл бұрын
@Donslife would I be able to switch in between the different color modes I don't know if I explained it right. Have a switch with 2 buttons one is on/off the other switches in between white, amber, white and amber then white stobe Amber strobe and white and amber strobe. Thanks for ur info and time.
@Donslife Жыл бұрын
With the Auxbeam you could do all of those modes separately
@Joshua3131cc Жыл бұрын
So I'm wondering if I can cut the switch controls off and tap my DRL so they can work automatically? Then make everything automatic except things like light bars that are not for road use! Maybe i just need to find a way to split or separate the switch controls wire. Great videos keep up the great work!
@ThatOneGuyWithAReallyLongName.2 жыл бұрын
So, theoretically, would I be able to run this purely from my phone without installing the switch panel? I'm looking at getting these for my RHD Jeep so I can finally get some strobes on it, but not super keen on the idea of tearing the dash apart to run the wires. Great video, super informative!
@rwooley44946 ай бұрын
to group lights do you have to have your phone hooked up all the time or will the control panel remember the group?
@Donslife6 ай бұрын
No need to use the app each time.
@mattwitzig9462 жыл бұрын
I was looking to use this panel to run white/Amber pod lights. Would I be able to have 2 switches control each color of the light (set one to run solid white, the other strobe Amber). Would I have the jump the ground between the two switches? Thank you.
@Donslife2 жыл бұрын
I have a newer light bar with amber and white DRL’s. They are hooked up to 3 switches. One for each color and the lightbar array itself. Works wonderfully. You should be able to run each positive wire to each individual switch too.
@smile4ever3635 ай бұрын
Hi Thank you for the nice review Can I control the intensity of the lighting, make it dim or strong?
@Donslife5 ай бұрын
No problem. Thanks for watching. This product doesn’t allow you to adjust the brightness of the connected devices.
@smile4ever3635 ай бұрын
@@Donslife Mmmm Thanks 😊
@Juddmann0072 жыл бұрын
A+ work as always! If mine wasnt a lease id consider doing alot of your mods. Have you considered installing the sierra sportsbar from the 16-19 all-terrains? I swapped mine over but on the x-31 package not the at4. Ive had many compliments and would def look good on the artic white!
@mr.workhardplayhard65502 жыл бұрын
What is this sportsbar you speak of? I have the same truck
@Juddmann0072 жыл бұрын
Gm had a factory sportsbar they offered on the 16-19 all-terrainX packages. I kept mine when i sold the truck and put it on my next one which was the '21 new body style.
@Donslife2 жыл бұрын
I have thought about a couple sport bars including the one you speak of. With my current box cover I just can do it. But I haven’t ruled it out
@Juddmann0072 жыл бұрын
Box cover definitely wont work. I had to do a bit of modding to the tonneau cover to make things fit right. The factory covers will not fit either. Only certain aftermarket ones will work.
@curtiscorzine57184 ай бұрын
Can you make a group that would turn on all of you lights and make them flash but the other buttons would be a normal setting of on and off?
@sand-barry Жыл бұрын
Are you able to customize the pulse pattern? Or is it always the same?
@Donslife Жыл бұрын
This species unit allows the one speed for pulse on each switch
@sand-barry Жыл бұрын
thanks!@@Donslife
@samhartfieldlewis52472 жыл бұрын
Really smart, like got both standards buttons or the Bluetooth. Nice one thanks
@Donslife2 жыл бұрын
I also like the dual functionality
@grupohastaelfinluchare9418 Жыл бұрын
Do both units do the strobing or just the one with the Bluetooth ?
@Donslife Жыл бұрын
Some non-Bluetooth models have the feature. Look for ‘pulse’ as an available function
@JR-pd9xz6 ай бұрын
very good step by step explanation - question? the ignition/accessory switch wire - where would I connect it since I can't do your option where you spliced into a red wire? I have 2024 GMC Canyon elevation - please advise
@Donslife6 ай бұрын
Heated seats circuit? I used my cooled seats for these things
@Imheem902 жыл бұрын
Does this kit has the feature come in white?
@terrymills987 Жыл бұрын
If you forget to turn the lights off does this automatically turn them off after shutting the truck off?
@Donslife Жыл бұрын
Yes, when the truck is turned off the panel will lose power too and shut off all accessories connected to it. I chose to wire it up this way. In a later video, I added a remote to be able to turn the panel on and off independently of the truck. Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@getoutwitj7192 Жыл бұрын
Awesome job, can you turn on the lights with the app even if the truck is turned off?
@Donslife Жыл бұрын
Yes if you wire it up that way. Here is a video where I can turn it on remotely too: Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@ChristianWobser Жыл бұрын
The light strip had 3 cables, how did you connect it?
@Donslife Жыл бұрын
I replied to your instagram message 😊
@someguy44765 ай бұрын
What sort of range do you get on the app and phone use??
@Donslife5 ай бұрын
Normal Bluetooth range, like 10-30ft. They make a RF remote version too now
@martee42 жыл бұрын
Does the car have to be on in order to use the app? Would be cool to turn on lightbars from the rooftop tent if need be.
@Donslife2 жыл бұрын
No, you can install a remote switch like I did in this video if you wanted: Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@martee42 жыл бұрын
@@Donslife thanks! 🙏
@nodnod01 Жыл бұрын
Gained another subscription! I would be interested in knowing if the Ar-800 is still performing well after a few months now.
@Donslife Жыл бұрын
Welcome! It absolutely is. I just wired up some more lighting in this video last week!
@Donslife Жыл бұрын
kzbin.info/www/bejne/iXTLnHiBYrefi6c
@ShawnDraper-vw8ld Жыл бұрын
Does the ignition need to be on to turn lights on with app.
@Donslife Жыл бұрын
Depends where you attach the remote turn on wire. I did a follow up video here with a wireless remote turn on option. kzbin.info/www/bejne/l4ealqxraZZomqs
@dempseydoodles2 жыл бұрын
I just got to the part of the video where you said you have a compressor under your hood? I know I didn’t hear that wrong because I even ruined it in. Heard it again, lol. Do you have a video showing the install of your compressor?
@Donslife2 жыл бұрын
There are a couple related to it. Here is the main one : How to Install a Wireless Compressor for your Air Suspension kzbin.info/www/bejne/pn2mepyXq9Z-qqc
@Donslife2 жыл бұрын
And another: How to Install an Air Line in Your Truck! kzbin.info/www/bejne/iJnUpHxqg6hlqLc
@TimDurr-x5o Жыл бұрын
Is there an option to have the system turn an input on (light bar) when you start the truck instead of having to manually turn it on via the all or in-cab control?
@Donslife Жыл бұрын
Not on this model that I am aware of. If you wanted to do that, just hook up a relay as a trigger wire to your high beams
@TimDurr-x5o Жыл бұрын
@@Donslife thanks, man!
@travisjesso94158 ай бұрын
Hi sorry to bother you, I have a 2022 gmc sierra at4 and purchased the smoked mirror lights with signal lights. Came with no instructions and wondering where would be the best place to run the signal wire to. It's the light on the mirror face
@Donslife8 ай бұрын
I’m consider finding the fuse for each signal light and connect there with a fuse tap
@travisjesso94158 ай бұрын
@Donslife I was hopping to tap in the harness in the door if there was a wire for the signal, not sure if there is or not. If not I would have to do it the way you said. Thanks so much for getting back so fast and for your time
@teejayyouk8 ай бұрын
Question. If the light bar has 2 color modes (amber and white) , would you need to wire them to separate switches? It looks like you did but wanted to confirm! Thank you. Great video looking to get one for my father in law
@Donslife8 ай бұрын
Yes I have each DRL to their own dedicated switch
@swoleousis9215 Жыл бұрын
Can you turn the pod light on without the ignition on or no? And if yes, how do you wire where the pod light can turn on without the ignition being on and would it drain battery? Thank you
@Donslife Жыл бұрын
Yes there is a way. Here is one way that I did it : Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@raysanichar8098 Жыл бұрын
Whats your thoughts on garmin powerswitch?
@bradbrown21682 жыл бұрын
Pulse mode for emergency road assistance?
@Donslife2 жыл бұрын
Maybe a good plan
@uniteddrones76262 жыл бұрын
If I power off the vehicle “cutting power to accessory wire turning off the unit” if I turn my car back on without turning the switches off first will the buttons that were on. Will it come back on when you start? Or do you gotta turn them back on every time
@Donslife2 жыл бұрын
The switch is designed to turn on and off with an ignition or accessory trigger. You would need to turn the connected device on again after the panel loses power. You can likely do some creative wiring outside of how the manufacturer instructs the installation. Going this route you can forgo using a switch altogether and just use a relay.
@uniteddrones76262 жыл бұрын
@@Donslife hold on I think we might not understand eachother, let’s say switch 1 is on currently, you turn off ur truck without turning off switch one. the device looses power, turn ur truck back on, will switch one also come back on or do you gotta press the button again.
@Donslife2 жыл бұрын
@@uniteddrones7626 sorry! Shutting of the vehicle resets the panel to ‘off’ for all the the connected devices. You have to repress each item or group you have programmed to turn things back on.
@brucemiddleton6697 Жыл бұрын
hope you see this but how did you mount the pod on the dash?
@Donslife Жыл бұрын
Double sided tape (good quality) used on emblems
@markmanning56832 жыл бұрын
Hey Don, a little curious when you are speaking about the "App" and choosing the Colors. Are the Colors associated to the Buttons on the App or colors coming out of your Lightbar?
@Donslife2 жыл бұрын
Strictly the look of the panel buttons can be changed with the APP
@markmanning56832 жыл бұрын
@@Donslife Thank you, Sir. Great Videos and modifications. Must be nice to be rich! Ha, Ha, Ha........
@caseysathan5 ай бұрын
You may have answered this, but I have a 3 way switch for light. On/off/backlit. Will this panel allow for all 3 positions?
@Donslife5 ай бұрын
Not that I am aware of. A 3rd position would need a 2nd switch to be used.
@TexasRho832 жыл бұрын
I am leaning towards Auxbeam > more expensive options but I don't like that I have to turn my IGN on to power up my accessories. Is the app control also dependent on IGN being on?
@Donslife2 жыл бұрын
Fair point. You can wire up the switch panel to constant too. Really up to you…….or you can add a diode and a remote switch like I did in the video. Now I can sit by the campfire and turn the switch on remotely, while controlling all the gadgets. (For example) 😊 Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@jackmeurs2438 Жыл бұрын
Hi, Don. Excellent channel. I am interested in the AR-820, but do not wish to mount switches in the truck. I have a 2023 Canyon Denali, with Google built into the infotainment enter. Do you know if the app could be downloaded to the truck, and I could control my accessories with the screen? Thanks
@Donslife Жыл бұрын
Not that I know of
@SpaceWhiteF150-dg6mq11 ай бұрын
Can this only be used when the truck is on?
@Donslife11 ай бұрын
Depends how you want to wire it up. Here is a follow up video : Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@alefpvc.r.4540 Жыл бұрын
Hi, thanks for the tutorial. What's the name of that light bar that you show on your truck?
@Donslife Жыл бұрын
No Problem. I had a 20” Rough Country with DRL but now I have upgraded it to a Strands Siberia 22” lightbar. I have videos for both
@alefpvc.r.4540 Жыл бұрын
@@Donslife great, thanks 👍
@javieralcala98052 жыл бұрын
What is the fuse # where the thin red wire goes?
@Donslife2 жыл бұрын
I went with the cooled seat circuit
@javieralcala98052 жыл бұрын
@@Donslife could i use one from the front fuse box, i have a 2020 GMC Sierra, or do you recomend not use that box?
@Donslife2 жыл бұрын
Hard for me to comment since I don’t know if your 2020 and my 2021 have the exact same fuse locations. If you can find a suitable circuit in the front box, go ahead. I wasn’t happy with my options in the front fuse box under the hood
@javieralcala98052 жыл бұрын
Ok thanks for u help
@andrewlund38862 жыл бұрын
Great vid. Do you know the power the panel uses to operate itself? Like standby power when all the circuits are turned on but no accessories actually drawing power? I have a different panel that draws 1a constantly just to have switches in on position.It’s a bit of an issue and I need to find new panel. Thanks
@Lonewolf_Will2024 Жыл бұрын
Hey Don what fuse do I use for my acc I have the same truck
@Donslife Жыл бұрын
Try the cooled/ventilated seats on the passenger side interior fuse panel
@johntaylor1992 Жыл бұрын
Can you dim the light bars and stuff with the app also like the trigger controller?
@Donslife Жыл бұрын
No you can’t with this switch.
@stevensam8834Ай бұрын
Hey, great video. Do you know if you can wire a remote switch to power on an off an inverter. You may be familiar with the Renogy brand inverters. I have a 2000w pure sine wave inverter that came with a remote on off switch. I was wondering if there’s any way it can be connected to the auxbeam switch to have all my controls in one location.
@christopherdeo1765 Жыл бұрын
Which fuse did you tap for power?
@Donslife Жыл бұрын
For the remote turn on, I tapped the cooled seat circuit in the panel of the passenger side (in the cab).
@christopherdeo1765 Жыл бұрын
@@Donslife can I tap that fuse even if I don't have that equipment in the truck?
@garys9718 Жыл бұрын
Just curious 🤔 if you can have constant power to the panel since you can shut off the lights anyway? More or less if you're at a car show, that you're not having your acc,on
@Donslife Жыл бұрын
Yes you can. You’ll just drain your battery a little more quickly depending on what you have running as well as the backlight for the switch
@Donslife Жыл бұрын
I added a remote switch : Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@KTMcaptain Жыл бұрын
Are you able to set anything to turn on with the ignition? ie DRL always on unless you switch it off?
@Donslife Жыл бұрын
Yes it could be done but more wiring would be involved.
@KTMcaptain Жыл бұрын
@@Donslife I was thinking of wiring in a normally closed relay and using the switch to turn it off. But was hoping maybe it could be an option in the upgraded one to just be normally closed vs open. Thanks
@Donslife Жыл бұрын
Exactly my first thought. If you do it, let me know how you like it that way
@taylorhart4979 Жыл бұрын
I have the Chevy 1500. You used a existing fuse tap. Which fuse number would you recommend to tap into? Engine bay fuse number or passenger side fuse panel number?
@KC1PDW Жыл бұрын
Thank you for the video.
@jadoiron Жыл бұрын
If I have lights that I would like functioning while the ignition is off, does this switch Bank drain the battery if the accessory wire is hooked up to a power source that isn't ignition dependent?
@Donslife Жыл бұрын
It will drain a little power to illuminate the LED backlights for the panel if the remote wire is connected to an ‘always hot’ source. I left my panel powered up overnight and my vehicle wasn’t really drained. Over a few days it could be a problem. You might want to do something like this : kzbin.info/www/bejne/l4ealqxraZZomqs
@battleboy21382 жыл бұрын
Great Video! Thank You, with the RC Light that comes with three position switch, is it okay for the DRL and the flood to be on at the same time? is it really okay to eliminate relays and fuse holders and tap straight in with this unit? thanks
@Donslife2 жыл бұрын
Thanks! I have looked into the flood light and DRL being on at the same time couldn't get a straight answer. The most of have learned is that it won't hurt it in the short term. The flood light drowns out the DRL too. Each Auxbeam switch has it's own fused circuit and relay so yes, you can eliminate the ones that came with the light bar.
@jamesmanuel99382 жыл бұрын
Those with a 2022 or so GMC AT4 where did you connect the fuse tap wire to an ignition source?
@Donslife2 жыл бұрын
Passenger side fuse box has more options. The cooled seats is the one I used. Not sure the location on the 22’s
@victorayala681823 күн бұрын
When I put the pulse mode, there’s a constant ticking sound. Why?
@Donslife23 күн бұрын
Relays cycling power off and on
@victorayala681823 күн бұрын
@ do you know if there’s a way to get rid of that sound?
@Donslife23 күн бұрын
Not likely. It is normal for the relay to click every time a pulse is created
@coreyandashleysumma26672 жыл бұрын
Ah Don. I was waiting for you to visually show me mounting options inside the cab. Anyhow, I just bought one using the code. Originally $300, Auxbeam is currently already 10% off at $269. With your code it gets down to $243.
@Donslife2 жыл бұрын
I only found the one spot that wouldn’t involve screws or cutting
@jeromefronda25211 ай бұрын
I noticed you didn’t touch the brightness in the middle. Is the brightness for the panel or for the lights you’re turning on/off on the light bar?
@Donslife11 ай бұрын
Brightness is for the panel, which also has an ambient light sensor to adjust itself
@jeromefronda25211 ай бұрын
gotcha, but to confirm no way to dim the actual lights outside of the vehicle? I have Baja S2s on my roof rack, but at night camping it would be nice to dim them from being too bright
@Donslife11 ай бұрын
@@jeromefronda252 unfortunately this panel only does switching, no dimming. Be careful too, not all lighting will allow dimming.
@letseeplan7 ай бұрын
How is that motherboard? Much taller than regular 8 gang? Thanks
@jonathangatten2 жыл бұрын
Don...the link you posted is not the one you installed
@Donslife2 жыл бұрын
It’s fixed. Thank you!
@jonathangatten2 жыл бұрын
@@Donslife now I have to return mine because I didn't pay attention 🙃
@Donslife2 жыл бұрын
I suck 😞
@fouadissawi2 жыл бұрын
Hey Don, love all your vids and mods. Will this work just off the auxbeam phone app or infotainment screen without having to run the 8gang controller into the cab?
@Donslife2 жыл бұрын
Thank you sir! Technically you could leave the control panel tucked away somewhere safely in the engine bay away from heat and moisture. Your phone app via Bluetooth would do the controlling. Personally I would find that inconvenient and would want the panel in the cab, even if you left it sitting in the glovebox or something. If you want to control it with your infotainment system, you’ll need something like my CarPlay AI box to control the Auxbeam switches.
@chrisslavik94392 жыл бұрын
Which fuse was your pink wire going to? I am not sure which fuse to connect to on my 22 sierra.
@Donslife2 жыл бұрын
I ran it to the ventilated seat fuse on the passenger side panel inside the cab
@MikelM06 Жыл бұрын
@@Donslife This is the biggest question I have as well. I looked and a few others, and they also have this question, but I, unfortunately, don't understand your responses. I do think I understand that it's your pink wire in this video. I went to the compressor video but could not find exactly what you did here. Is there another wire or anything anywhere closer or easier to find? or do you have a video clip of this? Thanks so much for all the videos. Just used a ton of your discount codes so thank you!
@calebwooldridge2422 жыл бұрын
sweet video and after seeing some of the updates to the 8 gang panel I'm leaning towards it over the 6 gang, mainly the toggle/momentary mode selection and the slimmer fuse/relay box form factor (since it'll be going into a car). Thinking this is just the sort of thing to make installing various Leds and ambient lighting much easier (since I have yet to install any 12v accessories). I do wish there was a 3 way toggle switch option because for the front light bar I'd love to control it by being on/off/on w/high beams) but might need to wire that separately. One thing I was wondering is that when you were showing your compressor with the inline fuse you said you could replace the 20A auxpower box fuse with a 15A one and negate the need for the inline one. I thought replacing the fuses was not reccomended, did you end up doing that without any issues?
@Donslife2 жыл бұрын
You can change the fuse ratings up to 30A per circuit, just don’t exceed 60A of draw at once.
@calebwooldridge2422 жыл бұрын
@@Donslife okay cool, thanks for the quick reply bud. I just want to add a few things so 60A shouldn't be an issue. Having to run 3 less wires to toggles in the cabin will be awfully nice though 👌
@Overland_eXploits_Oklahoma Жыл бұрын
Great video. I have a question. Can it be operated via Bluetooth with the ignition off? I camp in the middle of nowhere and if something is stirring around camp I would like to be able to "Light up the night". Thanks
@Donslife Жыл бұрын
Yes if you wire the panel to be live with the ignition off
@Overland_eXploits_Oklahoma Жыл бұрын
@@Donslife do you know if it has any amperage draw that way? With all accessories off, of course. Thanks for the quick reply.
@Donslife Жыл бұрын
You can add a remote turn on like I did
@Donslife Жыл бұрын
Adding a Wireless Remote For My Accessories! kzbin.info/www/bejne/l4ealqxraZZomqs
@Donslife Жыл бұрын
This way I can turn the panel on from 20ft away and connect my bluetooth to operate anything
@saulbahena40612 жыл бұрын
great video, have a question.. I install the one thats not compatible with the app. if i get the one with the APP do i have to chasnge just the control pannel?
@Donslife2 жыл бұрын
Good question, as far as I know the control panel that goes in the vehicle is what ‘talks’ to the app. So as long as the switch box is compatible with a Bluetooth capable panel at a later time, I think it would work. I would ask Auxbeam to be sure just in case the physical connections vary. To be fair, I only installed the one panel and haven’t had experience with their other switches/panels
@saulbahena4061 Жыл бұрын
It worked with just the controller. Thanks for responding tho
@gk94172 жыл бұрын
Great stuff thanks 👍 you said you were going to up a different light bar Which new light bar you going with ✌️🇨🇦
@Donslife2 жыл бұрын
I am thinking the Strand 22” dual row with DRL. I haven’t ordered it yet, but I think that’s the one
@PrimoShootz2 жыл бұрын
Hi I have RC pod lights that have drl and spot light how did you wire that up?
@Donslife2 жыл бұрын
Both pods DRL positive lead connected to a lower amount circuit (probably a 10A) Both pods MAIN LAMP positive leads to the 20A or 30A. One ground to the body or the ground terminal in the switch box. I would check the specs for each pod and determine the Amp draw of each so you know what their combined draw is on each switch circuit. Then pick the appropriate one.
@saltlifechris36232 жыл бұрын
Clean! Been planning on the switch panel before I installed any auxiliary lights. Did you consider the switch-pros 9100?
@Donslife2 жыл бұрын
I did! But $850+taxes in Canada is more than I am willing to spend
@saltlifechris36232 жыл бұрын
@@Donslife Damm that's steep... with the auxbeam can you run any lights with the ignition off? For example if I wanted to run some rocklights
@Donslife2 жыл бұрын
@@saltlifechris3623 you could, but all of the connected devices would be ready to go and the panel would stay illuminated while standing by. You could add an inline switch or a trigger I suppose. I’d have to give it more thought. There are remotes you could use as a secondary power source to the panel. 🤔
@saltlifechris36232 жыл бұрын
@@Donslife great suggestion
@joshd74652 жыл бұрын
@@saltlifechris3623 i ran mine to be hot at all times. I shoot commercial gear firework shows so i need the lights to run long lengths of time with the engine and ignition off. It works great, and if just the panel is illuminated it does not run the battery down
@jwcivccc2 жыл бұрын
Once u choose an action for the individual buttons how do you save that so it stays that way?
@Donslife2 жыл бұрын
The order of the pad’s buttons correspond to terminals in the switch box. First button is the first fuse location in the switch box and so on. Example : If you want a 30A device in the third location, just move the 30A fuse to the third location in the switch box.
@jwcivccc2 жыл бұрын
@@Donslife sorry.... I meant "'in the app". Momentary, toggle, etc
@jwcivccc2 жыл бұрын
And I figured out how to do it better ... instead of using the app... double click the on/off on the panel to go into button program mode. Blue is momentary. Once u set the buttons press the power button again to save it.