NEW | The JAKL 2.0 - Palmetto State Armory

[@mrsimple4697]

This might be my favorite gun company

[@PalmettoStateArmoryVideos]

Love to hear it!

[@Joeak74]

What's with this "Might be" bullshit? PSA and Kel-Tec are the only innovative firearm companies that exist

[@dmining65]

Lol sounds like ass.

[@rhodeeznutz]

​@Joeak74 i dunno the HK Mr556 a4 is a massive leap for barrel technologies.

[@Joeak74]

@rhodeeznutz $3600? It better be. And... no thanks

[@johnnybagofdoughnuts4193]

Proprietary was necessary, but thank you for keeping the pistol grip/fire control the same as an AR.

[@PalmettoStateArmoryVideos]

🫡

[@matthewconnor5483]

Great seeing a company ask for feed back and actually listen.

[@jimmothypakistan5223]

Palmetto is an incredible obtuse company and makes it incredibly hard to give feedback

[@Nperez1986]

You're kidding right?

[@SteelCityIceBirds]

lol, put out a subpar product. Fleece people for money, “ask for feedback”, continue to repeat the process without making any significant changes.

[@xi-deadshot-ix5838]

@@jimmothypakistan5223I think you mean Glock lmao.

[@SamSam-ih6nt]

No one literally no one asked for this proprietary crap 😂

[@comradethorn6803]

As long as you continue to service and sell 1.0, this is a good thing

[@GetSmartGrips]

Rt

[@BigGreyDonut]

@@comradethorn6803 made a similar comment and they said they would consider uppers in other calibers still since their still making Gen 1’s rn. I think that’s super fair since it’s basically a different platform due to Gen 2 not being backwards compatible

[@6030jdr]

Except they hold drop significantly in$

[@traceyevans2757]

@@6030jdrI think that’s irrelevant. The firearm itself is what needs to be supported.

[@jUsTaSgEwD]

Danny has confirmed on reddit that the 1.0 isn't going anywhere

[@Eli1981-re5bh]

Looking more and more like the ACR.

[@bev8200]

They did buy Remington

[@fourthhorseman4531]

@@bev8200 They bought part of Remington. The Bushmaster part of Remington that had the ACR went to Franklin Armory.

[@ryanrichardson1169]

“ACX stock” 😂

[@mmancino1982]

JACR

[@DoctorRimfire_PhD]

@@bev8200no they didn’t. RemArms owns the Remington IP.

[@VintageWarfare]

Honestly, I will buy this, glad you listened to feed back. I want the ACR we never had.

[@Kocala]

look here hoss *blocks camera with finger

[@thelastjohnwayne]

It is amazing how PSA has gone from a very small firearms company not that long ago to one of the largest firearms company in the US in such a short time is incredible

[@xxdarkxxgamer6250]

Man shut up​@@Shaboomquisa

[@kyle18934]

They are basicly the only company I buy firearms from. 6 of my 7 firearms came from psa

[@JaySubii]

@@Shaboomquisawahh wahhh.. thats bullshit. Maybe 5 years ago sure but ive spent over $9k with PSA and NEVER had any issues. So its a you problem

[@rustymacshackleford6276]

That's one helluva statement dude and it is not accurate at all.

[@gavingraves7919]

Have any of you actually been to their factory or seen their processes? Do any of you design firearms for a living? Well I have and I do. Your status symbol weapons mean nothing to me when I run a PSA the same way as any duty weapon. They may not be the greatest gun company but their quality is fine. I've had more problems from FN and Sig then any other weapons manufacturer I buy from and I still don't give them shit for it, with the volume that PSA spits out and the real quality not your hyper fantasy PsA iS GaRbAgE rhetoric with no standing PSA is great.

[@adamresnick9027]

If you’re going with a non-AR lower, let’s see a 6.5 Grendel / 6mm ARC option with those new wider Magpul mags!!

[@Korbloth]

This

[@twelvepercentitalian2511]

With a 30 round magazine

[@shadowulf]

Mmmm, grendel 🤤

[@Rubeless]

Budget gun with expensive ammo, makes sense

[@detroitvseverybody3813]

yes use "precision" calibers in a long stroke gun, makes tons of sense lol

[@jjj0309]

This is the ACR we haven't had.

[@forestryfuelsandfire213]

Thats exactly what i though!!!

[@caleguenther8947]

No quick change barrel and it's not a short stroke piston. It looks like a modern modular rifle but it's pretty much nothing like the ACR.

[@mickeymang6]

​@caleguenther8947 true but this is better. You can actually buy one

[@Furiouspenguin27]

@@caleguenther8947bros going through several comments

[@krewslapyou]

​@caleguenther8947 still looks like a acr.......

[@WhoFartedSeriously]

This is why PSA will always get my business. They listen to customer feedback and actually implement improvements. Hell yeah.

[@TJUtes]

Looks beautiful. I’m still saving $ to get a gen 1 JAKL. Now I have to consider waiting for this one. Doing the Lords work, PSA, bravo.

[@J1Pa17]

Yall made defending myself and developing a new hobby/skill possible thank yall and much success

[@pereira.powerhouse]

There’s other companies that innovate but I don’t know of another one that follows customer feedback so closely when doing it. Love to see it!

[@Nperez1986]

You're kidding right? I strongly doubt they redid alot of machining based on feedback...it was more likely already in the coming run

[@Sivyis333]

Only feedback i suggest stop selling blems…..

[@Civiliansoldier762]

You guys just don’t stop knocking it out of the park and making firearms I need in my collection.

[@ThatPupRain]

The ACR is so back. I want it in Grey and slap an EOtech on it to match the MW2 vibes.

[@ethankaryadi37]

Shame we can’t get a heartbeat sensor 😭 😭 😭

[@DeimosPC]

@@ethankaryadi37 There's fake ones out there, I've seen em lol

[@caleguenther8947]

Not even close to an ACR. No quick change barrel and no short stroke piston.

[@petemcc6459]

You know you want pineapples or marijuana leaves for a paint scheme.

[@Yeedo420]

@@caleguenther8947 for a quarter of the price, I’d say it’s better either way.

[@davidbrown2284]

What a change. I had been holding off the first Gen hoping for some improvements. Love the closer charging handle, and love the lower, it honestly looks amazing.

[@PalmettoStateArmoryVideos]

We think it’s a winner!

[@jpk9171jpk]

Jakl 2.0 vs bnr 180 gen 3. Excited to see this head to head.

[@caleguenther8947]

The BRN is using a self regulating system. It beats the JAKL on that alone.

[@THEPRESTIGEWORLDWIDE]

@@CallMeSqualeno

[@Lowehomie121]

One is short stroke, one is long stroke.

[@caleguenther8947]

@Lowehomie121 been trying to tell people there's a difference and it matter. The density in the comments is wild.

[@kellscorner1130]

I can turn any milspec lower into a folder with the BRN, the PSA requires propitiatory parts and can't be built from a previously owned jakl lower. It's the Apple approach of making thing not backwards compatable so you're forced to buy more shit.

[@jimm7346]

You guys have been killing it, PSA. at least 3 of my 5 "must haves" are from you guys at this point.

[@AKnutt]

PSA is the company we needed a long time ago! 🔥💯

[@blackicekck9family379]

For sure that part…

[@agentrocco8042]

I hit up the website daily ,I love psa , we are so lucky someone is hearing our voices

[@StacyDaFunkBoogie]

Think I need that 308 version, thanks PSA, you guys ROCK….

[@waywardson911]

I was kind of surprised/disappointed this wasn’t 308

[@alexgriffin2732]

Pretty sure they have a 308 version. They're technically different guns (jackl 10 and jackl15) ​@waywardson911

[@evildrizzt1]

@@alexgriffin2732but is it a gen 2 .308 version?

[@roonimac]

@@evildrizzt1no

[@jerrylarios6398]

I got it and I love it, now I need this new jakl

[@PubliusRutiliusLupus]

Two things (possibly) prevent this from being a 10/10 for me: 1) I'm left handed and would've preferred a full ambi setup. 2) I'm in a state that is weird about folding stocks, so I hope they release a non-folding stock version. I guess the pistol brace should be good for a workaround.

[@Saberjet1950]

What state has laws on folding laws? And what are they?

[@PubliusRutiliusLupus]

@@Saberjet1950 Maryland. We can only have 2 of the following 3: 1) folding stock 2) flash suppressor (including silencer) 3) detachable magazine

[@MINUStheHEAT]

That's crazy they care about folding stocks. I doubt they'll be coming out with a non folding stock though. The main selling point of the Jakl has always been that it's bufferless. They'll probably just continue their Sabre line on their regular ARs.

[@Cjkolbrek]

Nice. Ty PSA. you made a affordable and reliable pistol option. I was able to afford the dagger. And it saved my life. Ty.

[@anthonys8947]

We need more details.

[@wilgiambra6930]

Yes

[@Cjkolbrek]

@anthonys8947 Kid tried to pull a glock on me, and I was faster. Took his gun from his belt. Drew mine from side concealed under my overshirt. I was working loss provetion and didn't see he was armed. The bottle of Jack he was stealing shattered on the floor after he slipped and got up he said he was going to shoot me because I called him an idiot.

[@Cjkolbrek]

I'm not sure how much detail I'm allowed to get into. He is in jail, and I am not. No shots fired.

[@Xenix-xb4gw]

​@@Cjkolbrekit's good that you didn't have to use lethal force, but the threat saves lives every day.

[@GoatDR]

Great job on this. Fixed everything I hated with the OG Jakl. You guys are killing it with this, H&R, and the mp7 clone.

[@masterkiloren99]

Welcome back ACR

[@chadjones7722]

this is knocking it out of the park, letting us chose new barrels, new handguards, even new cailbers, this is awesome. Lower weight, slimmer profile, farther back charging handle back, you really killed it guys. I hope you continue to support and expand the 2.0 line. This is awesome.

[@Letmec0mmentplz]

PSA is such a young company, but has so quickly become an empire. Of which, I am a proud citizen!

[@MedicAthlete24W]

@@Shaboomquisa how do you like beating a dead horse? I haven’t had any issues with the PSA stuff I’ve built and it sounds like they’ve improved over the last couple of years.

[@Bearjew2995]

​@Shaboomquisa So the buffer retaining pin broke.... ya happens in ARs bud. With your description you clary have no idea what you are talking about about. Stick to airport little guy

[@Bearjew2995]

@Ethan-oq2ds Had it happen at the range on my buddys BCM. I didn't blame BCM. Little parts brake carppy happens.

[@Bearjew2995]

@Ethan-oq2ds Shit happens. I've had good luck with my PSA ARs, but they are not my shtf gun. I would take my PWS.

[@ZeChamberlin]

1:45 why does it sound like a cat is meowing in the background?

[@patsaunders6035]

Bro, I thought that was my breathing 😂

[@KilroyMosin38]

I thought I was just losing it, lol

[@skothale4296]

I thought there was a cat outside!!

[@timbogenreif7303]

​@@patsaunders6035i thought my asthma randomly kicked in lol

[@infidelsinc3482]

I thought I had been drugged

[@cobaltcardsgaming5982]

Very sad its moving away from the standard AR15 lower. Probably will stick with the Gen 1 JAKL for that reason.

[@Liberty4Ever]

This is why we love Palmetto State Armory. They make quality products that we want, and when they say they want our feedback, PSA means it. They're a very customer focused firearms manufacturer.

[@FlyingDoge1]

You guys are absolute legends So much fire stuff you guys have been dropping

[@HarvickOne]

Great to see more additions to the JAKL family! I'll gladly spend my money on a 18-20" 6.5 creedmoor when it comes

[@watariovids1645]

I am happy with the Gen 1. 300 BO one I have but all these changes look like nice upgrades for people who are looking for a new one.

[@kyle18934]

Do you have feeding problems? Another comment said their gen 1 300blk out had lots of feeding problems

[@HDHNTER]

@@kyle18934 Gen 1 300BLK owner here. I've had no feeding issues aside from when I initially tuned the gas. Lancer mags for 300BLK - that's the way to go to avoid feeding issues.

[@watariovids1645]

@@kyle18934 None whatsoever. I don't shoot much subsonic out of it however. Most the ammo has either been S&B or AAC. I do use 300 BO specific magazines with it (mostly to make sure I don't mix them up with anything). I think I have one of the slightly revised ones as i bought it a while after they were released.

[@kyle18934]

@ I wonder if the guy was using cheap magazines. that would do it. I know Ive had some jams from a cheap metal magazine in my ar15

[@user-wc1em7pc2p]

The best part of the first one was drop on to milspec lowers... creating a platform on a proprietary lower is several steps back, especially as you noted, because it's just for the aesthetics...

[@brendanakers7294]

I agree completely

[@Ranny0000]

I’m with you for the ability to drop on mil spec lowers, but gen 2 clearly has more improvements than just aesthetics. I just hope they don’t stop selling gen 1.

[@georgewhitworth9742]

The problem with the Gen 1's is that they didn't actually didn't drop into mil-spec lowers, but they needed a special bolt catch in order to fit. And unless you got those special Aero swappable catches, thats a bit of effort just purely to go on a AR lower. Might as well make it its own lower.

[@Ranny0000]

@ maybe it didn’t work out fantastic with the JAKL, but I do appreciate PSAs approach in allowing people to build their own pews. Keeps the barrier of entry down. It’s a lot easier to buy an upper and have it shipped to my door than fork out the extra cash for a complete one and go to/pay an FFL. Oh well.

[@somefreedomfries]

@@georgewhitworth9742 The extended bolt catch needed by the jakl also works with standard AR upper. Besides, if you want to switch back and forth between AR and jakl configs using the same lower you need to do some work anyway to remove the buffer tube.

[@austinpatkos7563]

Love it. Sometimes not having everything an AR-15 has is a good thing. The market is so odd sometimes, "We want it to use, ar15 lowers, ar-15 fcg, ar-15 bolt, ar-15 bcg, ar-15 stocks, ar-15 handguard, ar-15 barrels, ar-15 buffer tubes, ar-15 upper receivers, ar-15 dust covers.......but we want it not to e an AR-15" . Sometimes different is good.

[@georgewhitworth9742]

Sometimes thats pretty reasonable to ask when the entire market for the AR15 is as huge as it is. 🤷🏻‍♂️ What needs to happen is the *non*-AR15 market needs to standardize on SOMEthing, rather then a million different proprietory rifles.

[@herbderbler1585]

@@georgewhitworth9742 sadly the closest consistent alternative we get is "SCAR but not really." The lack of standardization there rivals the AR-10 market.

[@Dominator2930]

​@@georgewhitworth9742 the AR15 market is huge, so if you want something that takes AR15 parts you get an AR15. I do agree it should take some common things like magazines and triggers, but I prefer seeing purpose built vs AR15 in a trench coat.

[@justsmy5677]

1. Happy you are listening to customer feedback. 2. I hope you continue to concentrate the majority of your effort on mil spec / standardized weapons. 3. When times get tough, parts accessibility, commonality and familiarity are key when trying to keep a couple of rifles running. 4. Unique and proprietary weapons and parts are not what most folks are looking to own, run or stockpile parts for.

[@rhodie33]

Honestly all the changes I wanted.

[@combatreadychannel]

I’ve done a couple different versions with the Jakl Gen 1 and am loving it! Excited for this next Generation!! Reap Weaponries SCY Chassis with the Palmetto State Armory JAKL with Franklin Armory BSF3 trigger kzbin.info/www/bejne/ppbYfZ2bedh4eNk The PSA JAKL: Part 1 kzbin.info/www/bejne/pYSqlHSJhd2hidE Palmetto State Armory JAKL. How is it after 1,000 rounds. kzbin.info/www/bejne/Zn3Chnijgqigjas

[@flexvolleyballclub2166]

That bullpup version looks sick!!!

[@BuckPear]

That reap weaponry looks good with the JAKL. I wonder if it will still work with the Gen 2???

[@BattleBlasterkids]

I want that bullpup!!!!

[@FluxApex]

1:25 Cat 🐈 meowing? Do yall have a shop cat?

[@TheTexasOiler]

Whammy bar on the guitar

[@spartanb013]

I heard that too lol

[@JrayRob79]

I just muted my phone thinking there was a cat in the room. Lol😅

[@perez5249]

Also @ 1:49. It’s a baby Jakyl.

[@kzarnold3678]

I thought that was me wheezing as I breathe

[@TacticoolPenguin]

The barrel was the biggest reason I didn’t get the original. Now I gotta get this one! Thanks guys!

[@GoldenWebb]

Can’t wait for it to come out! When will it be out??

[@paullane7489]

I love it! The innovation with you guys is great!!!👍🇺🇸👍🇺🇸

[@brittainwoolley6848]

PSA took all the design complaints and overhauled them. This is the single most exciting firearm release I've seen in a few years. Now, make a bullpup variant.

[@flavortown3781]

Check out the MBAR, bullpups need a very different set of features than traditional rifle layouts offer

[@aaa3d473]

Why a bull up.

[@brittainwoolley6848]

I'm very aware of what bullpups require lol. Thanks. Because, bullpups are cool and so far nobody has exactly done it the way the US wants. Desert Tech is close, but still not quite there.

[@scottchristiana3449]

​@brittainwoolley6848 my x95 (300blk) is pretty damn perfect

[@aaa3d473]

@@brittainwoolley6848 I don’t think the us really wants them at all. They are niche and kinda just a novelty.

[@peebreezy5015]

Would love to see it in the 338 ARC. Keep up the great work!!

[@RetroGameDungeon]

This Jakl 2.0 is insane! Wow.

[@BertShackleford]

*_JAKL 2.0_* in _6mm ARC._ Please and thank you. Stay classy my friends.

[@firstshotprecision3360]

If you keep it up with the support for this line offering barrels in all kinds of calibers this will be the acr that everyone always wanted and at the price they originally promised

[@caleguenther8947]

@@firstshotprecision3360 needs a short stroke piston and a quick change barrel system to be anything like the ACR. This is closer to an updated AK or a Galil.

[@usarms149]

Dude, you guys are killin' it this year. Can't wait!

[@graycockerpunch6191]

I love everything that have been coming out recently

[@Sneedmeister]

Not being able to use a normal ar15 lower makes this a major NO for me. Being able to reuse your ar15 lower was a major selling point of the JAKL itself; now that it lost this I might as well just keep saving for a Bren 2 or Karmel or something. Sorry PSA but you forgot what made people like the JAKL to begin with.

[@MatthewC176]

A 6arc version taking the icar PMAGs would be great

[@joshuadrake1993]

Yes yes yes

[@jaredvos4431]

Agreed. Add 6.5 grendel and 338 ARC barrel options as well, and you have a ton of good options for that new mag-well standard

[@MS-1994]

You guys are killing it!

[@mr_trigga-time]

Every gun doesn't have to be Glock-based or AR15-based, thanks for diversifying the market and making something new!!!

[@effu9375]

"But does it take glock mags?" people are hilarious.

[@VoFALT]

No one wants this

[@Mathewson1G]

eh, affordability and efficiency are usually all i look for in a gun lol unless it’s a collectors piece

[@dsmith14k]

Love it! Can't beat a company who takes customer feedback seriously!

[@irysh9]

0:44 The reason why we did this is MONEY

[@Yeedo420]

No shit, they’re a company. They also care about what we want.

[@TazyBaby]

Seriously, all of the other upgrades completely fixed gen 1s problems, and then immediately made the platform obsolete for upgrading other rifles

[@Relentlesscopez]

Nah. Im sick of ar15s give me something else.

[@jb76489]

Oh no, do the big meanie heads want to be compensated for their labor? You poor poor baby

[@dejonallen18]

⁠@@Yeedo420are they saying in 0:44 meaning that the jackle 2.0 will locked as far a upgrading meaning, you have to buy parts from PSA only?

[@joshuacharles7769]

Every single time yall put out videos I get more and more excited

[@Strohmister]

I really need to make more money for one of these…

[@Paintplayer1]

PSA listens to their customers and always innovates. I love it

[@PalmettoStateArmoryVideos]

We love the feedback!

[@JonathanC199]

I’m so glad that I waited to get one

[@thewatcher4552]

Listening to customers and doing something about it...that's a company I'll stand behind! 👍🏾👍🏾

[@2ndHandReview]

I like the looks of it. Let's see some specs, and reliability testing.

[@PalmettoStateArmoryVideos]

Stay tuned!

[@snookiewozo]

It's beautiful. Fantastic work. You're doing things that most entire countries are unable to do.

[@combatreadychannel]

The JAKL Gen one was already good! The Gen 2 looks even better

[@combatreadychannel]

I’ve done a couple different versions with the Jakl Gen 1 Reap Weaponries SCY Chassis with the Palmetto State Armory JAKL with Franklin Armory BSF3 trigger kzbin.info/www/bejne/ppbYfZ2bedh4eNk

[@combatreadychannel]

The PSA JAKL: Part 1 kzbin.info/www/bejne/pYSqlHSJhd2hidE Palmetto State Armory JAKL. How is it after 1,000 rounds. kzbin.info/www/bejne/Zn3Chnijgqigjas

[@buckwild9080]

Definitely looks like they listened to their customers. Everything I could think of that could improve the design, they did!

[@flexvolleyballclub2166]

I’m glad that they are making improvements but made that I just got the Gen 1 recently 😢

[@Lazy_Hazy16]

@@combatreadychannel I’m liking that bullpup design!!

[@Iamgroot377]

PSA is taking over!! Whats awesome about this company is they actually listen to the customers.

[@kurtis7328]

A 308 version would be nice js

[@otakuskateboarding9617]

from feedback to fruition psa hears the consumer loud and clear and innovated accordingly good job👍

[@xenomorphelv4265]

The first jackal passed the InrangeTV mud test flawlessly, which was impressive. As long as the manufacturer works on the flaws the customers spotted and release something better, we can only support you. A rifle must always be minded and built as if your life was literally depending on it.

[@cjking4052]

I am SO glad I have been waiting to get the JAKL can’t wait to get the 2.0 in 13.7” 🤤. This is the rifle I’ve been waiting for!

[@GolfNguns23]

I love psa so much, keep doing yalls thing man

[@whitefeather2727]

Biggest attraction to the Jakl in the first place was the ability to retain my OG lowers and now that they've gone full proprietary I ain't into it so much. Hopefully the continue to produce both versions.

[@asnetherlin]

You guys are killin it!

[@ricktieken7025]

Nice job on this one! This will be on my must have list! Thanks PSA!

[@1stShotTactical]

Very EXCITED for this! Looks awesome!🇺🇸

[@PalmettoStateArmoryVideos]

Us too!

[@thicock45]

Love seeing the platform being further developed. Although the change of lower receiver concerns me a bit. I hope the "unique look" and proprietary buttstock are not the only reasons you decided to ditch the milspec ar lower

[@Pilot--]

The proprietary lower change is a mistake. Hopefully you keep selling the original version.

[@michael8.6]

Amazing job PSA!!!! LOOKIN GREAT😅! Can't wait to get my hands on this and put it through it paces! The ability to swap barrels/ calibers. The ambi controls a lighter frame while still being monolithic. The only thing I might add is a wider range of muzzle devices to choose from especially because of the pin and weld requirements for shorter barrels

[@bilson7523]

You gotta do the shorter handguard, so it maintains that ACR look.

[@00-Dima]

Buy a angle grinder

[@bilson7523]

@00-Dima Or PSA could just keep a handguard like the Gen 1 had, so I didn't have to take an angle grinder to a 1300 USD firearm

[@honzabalak3462]

The alternating Mlok slots would make shortening the original handguard difficult anyways. A factory made short handguard would be the better option.

[@jacesmith9342]

I’ve always said that PSA should offer buying just the barrel and trunion to do barrel swaps vs buying a whole new upper. I understand that can be difficult with the slot for adjusting the gas system would be out of place if you get a barrel with a different gas system length than the original purchase. But that has been one of the things keeping me from getting a Jakl so far.

[@invaderjoshua6280]

Just one question. Why is there not a ambi safety in this when all the other controls come ambi? It can’t really be cost because the difference between a one sided safety or an ambi safety is only a few dollars. I would highly suggest including a ambi safety. It’s become standard on this kind of firearm from every other manufacturer. The dissent from Cmmg, the apc from B&T, the scar from fn, the MCX from Sig. All those piston guns have fully ambi controls. Even if it’s not necessary it just makes yours look cheaper and subpar without it.

[@Wind_slash0]

Coming soon in gen 3 😆

[@zachfrickel]

Love this option and what PSA is doing. Keep it up!

[@myk_islive6471]

I think that the non-interchangeability with the standard AR15 lower kind of ruins the magic of this rifle. I love the Gen 1 for this reason, and imo was the one great Equalizer in this guns success vs just buying a CZ.

[@johnevans1969]

Outstanding PSA🎉, I can't wait to begin my journey with this platform. Thank you PSA🎉

[@brandon152lee]

This is 6 mm ARC would be sweet! Excited for the future!

[@robboss1839]

Very interesting as usual, I wish you guys the best. PSA gets some hate but it’s a cost of dong business at your consumer friendly budget level. You guys do a lot for bumping the numbers up in the community so I respect it.

[@soiralknarf]

Jakl 1.0 owner status: RUGPULLED

[@gifthorse3675]

Every gun owner ever…

[@kylet6898]

Happy to say I live in the Palmetto State! Absolutely love PSA and please just take my money!

[@TheHuntingTrout]

I need this and the Sabre 6 arc!

[@radf-zf7ev]

Those are very nice changes. I have a Jakl 300 BO and I like it but these are improvements. I've been wanting a 5.56 Jakl and now I want the updated version. I hope the .308 Jakl goes this route as well someday. 👍🏻

[@kujokage1911]

having to buy another lower is kinda annoying but looks worth it thank yall for making getting into guns affordable

[@joshuawoodman6603]

PSA is the best thing to happen to the firearm community right now. Thanks for being america's armory.

[@C_Swells]

A company that listens to customers, then uses the feedback to offer solid product improvements….What a strange concept!!! Keep crushing it PSA 💪🏻💪🏻

[@Steve_Seese]

Love it! Keep up the good work! Yall are the best!

[@GiuseppeSimonetti]

This is awesome, I love PSA. They always never fail to impress. Best firearms manufacturers in modern day America

[@dakotajoe8684]

The revolutionary thing about the jakl was that it was compatible with ar lowers it was the best part a bufferless ar upper that was compatible with what you had

[@johnathanhall5438]

Badass!!! Arc cartridges and it'd be perfect. Need a jakl upper for the ar-v!!!

[@itsheresy]

I was just about to buy a .308 JAKL, will be waiting for the 2.0 now! Good stuff

[@droy47]

Thank you for making it different enough not to piss off the Gen 1 owners. There's still a reason to buy the Gen 1. Kudos. I might buy a 300blk pistol

[@BradyLSmith]

This looks fun. I know I could say more but I think that's good enough. Can't wait to see you in my hands. Thanks PSA for always making sure I never have too much in my bank account. Lol

[@robertknight6824]

Awesome! I'll take mine in OD Green, please! This company never ceases to amaze me.

[@stephanieandjared390]

PSA is the best. These guys continue to innovate. They are America's gun company. You could 1000% justify their guns being priced way higher for the amount of r&d they must do 24/7. But they dont. There is literally only one reason why... because they respect their customers. They could sell you their guns for twice the price and use the excuse of cost of innovation, but they know they will sell enough to cover costs, and pay for the next idea. Its really something to be proud of these days. Honesty and Integrity... 🇺🇲