New Traxxas E-Revo VXL vs. Old E-Revo Brushless Edition SIDE BY SIDE Comparison | LVC RC

The new Traxxas E-Revo 2.0 compared to the original E-Revo Brushless Edition. I may not have covered all of the differences, but I hope you enjoy. At the end, I talk about MY OPINION. It's what I personally think about the situation; it may not be right.
E-Revo 2.0 ▷ bit.ly/3AZXmnh
▵ SUPPORT LVC RC ▵
Merchandise ▷ www.lvcrc.com/shop
Donate ▷ www.paypal.com/paypalme/LVCRC
Business Inquiries ▷ [e-mail]
▵ FOLLOW LVC RC ▵
Website ▷ www.lvcrc.com/
Subscribe! ▷ / @lvc_rc
Instagram ▷ / lvc_rc
TikTok ▷ / lvc_rc
▵ SHOP LOCAL ▵
Where I get my RC gear ▷ / hturockford
Go find your local HobbyTown USA! ▷ www.hobbytown.com/store-locat...
Intro Song:
Music provided by Montage Rock
"Might and Main" by Defences
Brand new music from Defences' debut album 'With Might And Main' which you can purchase here: itunes.apple.com/us/album/wit...
Check out the artist's pages!
itunes.apple.com/us/artist/de...
open.spotify.com/artist/6M3Ix...
/ defences. .
/ defences
/ defencesband
/ defencesband
defences.bandcamp.com
▵ DISCLAIMER ▵
Some links in the description of this video are affiliate links. As an Amazon Associate I earn from qualifying purchases. Purchasing LVC RC merchandise and items through the affiliate links helps the channel grow and is greatly appreciated. Regardless, I will give you my unbiased opinion. I pay for everything with my own money unless mentioned otherwise in the video. These videos are primarily for entertainment purposes. Use the information in them at your own risk.

[@LVC_RC]

Buy an E-Revo 2.0 here! (affiliate link) ▷ bit.ly/3AZXmnh

[@justinvanaulen2478]

Best video comparison of the two on KZbin. Thank you for your hard work! I own both and I'm loving the updated version.

[@Skynet151]

I love 2.0 upgrades, but I prefer 1.0 body. Looking nicer.

[@rcplayground7]

Agree!! Looks sooooooo much better I miss the old one 😢

[@McDonaldsplayer]

No

[@tommyd3jr]

The rubber-flap on the receiver is for quick access for programming

[@offroadzone6972]

Really honnest point of view....great comparaison 👍

[@jasonbrown1505]

This was a cool vid!!! Ive been looking for some true feed back on the 2.0 !!!

[@gotti84121]

I’m a first time viewer and really enjoyed the program content and the perspective you shared as an owner of both generations. I have “subscribed” to your KZbin channel and have it set-up for all notifications. I’m relatively new to the hobby and enjoy learning everything I can about it. I look forward to being a regular viewer of your channel and the content that you explore with us... gotti

[@LVC_RC]

gotti84121 That’s great to hear, thank you for the kind words. 😄🤝 Welcome to the hobby! I appreciate your support, it means a lot. 👍

[@wolfenher6937]

This is one of the greatest comparison I’ve really enjoyed. You deserve a like man 👍👌

[@martinplayz6490]

i'am happy with my E-revo brushless 1.0

[@vikingselph5475]

I am happy with my 2.0

[@DB-qm4jx]

I’m bicaruel

[@rcplayground7]

It's soooooo much better actually.

[@VoidXRC]

That was a great comparison well done. in 2006 I had the Revo 3.3 nitro but all I have left of that is the chassis now.

[@LVC_RC]

Void X RC Thank you, I try. 😉 That would be cool to build it back up some day since you still have the chassis.

[@Megasty15]

I had the 3.3 as well. I only have the chassis & a set of tires now. It stayed in the parts bin for the entire 7 yrs I had the E-revo, but that's gone too. Maybe one day I'll use it with the parts from this one to make an awesome E-hybrid.

[@VoidXRC]

I have thought about building it back up before a few times, definitely something I would like to do some time. It's actually the original revo too now that I just looked at the chassis

[@netcruzer]

The rubber piece on the RX box is a quick access to hit the Link button to bind with another TX. At least that's my opinion of what it's for.

[@TheDotransporter]

I just got an erevo in parts and didn't know which one was, you saved me tons of time and hours of research. Thank you!

[@MTMskate1]

Only complaint I have is the graphics on the new body. It just looks too flashy for my taste. Personally liked the older bodies better. Cool thing is, you can run pretty much any other Revo body by switching out the body posts to the old ones. The X-Maxx style latching system was a great improvement non the less. Great video!

[@StevenVanCauwenbergh]

Thanks for putting the video together! Loved it!

[@BuyitBreakitFixit]

Great video. I might pic one up for my channel. The rubber plug on the top of the receiver box is for ease of access to push the bind button, if needed.

[@nikolaiiaksenov]

In my opinion, it’s the same truck, but traxxas fixed all the issues, really this is how the first e Revo should have been! Great video Garrett.

[@mikes062]

Breaking rc don't forget the old one came out in 2006 and it's competition was their own emaxx and some sort of savage. They didn't have to have something as built as the new one.

[@nikolaiiaksenov]

mike s wow that’s crazy haha. I bet back in 2006 it was a beast. I’d love to get the new one but I think I should quit rc

[@mikes062]

Breaking rc yea, it's always been a beast and like he said, if there's really a problem with the v1 it's the driver way more than the truck.

[@nikolaiiaksenov]

mike s no way, all of my traxxas cars always break and it’s not really my fault. I don’t break structural parts I always break esc’s, motors, diff gears, etc.

[@tommyd3jr]

Breaking rc with glass diffs

[@ReadySetRC]

Nice thorough comparison! Great video!👍👍

[@paulkauss9346]

Good video, just got the 2.0 and broke the back tower where the body clips in. I fixed it with jb weld and zip ties. The E revo deserves pro level bmx dirt jumps or bigger skate parks--this is where this thing shines. Love my E revo.

[@adambgunn]

Best comparison of these two trucks out there. I sold my revo 1.0 a long while back and have driving my Arrma Nero since.. but I took the revo 2.0 plunge last night.. it arrives tomorrow.

[@Bustedrc]

Thank You very much for such a good comparison.

[@STEVOD313]

First on the list today, quick draw! Awesome erevos, I’m glad u did a comparison I’ve been wanting to see a side by side 👍👍👊👊📹📹

[@LVC_RC]

Thanks! I figured that it was something a lot of people would be interested to see.

[@RickyRevorc]

I want a mini revo 2.0!

[@LVC_RC]

That would be really cool to see Traxxas make!

[@codyjohnson5161]

Yes, We all need this.

[@dicktrickle5352]

I have Mini summit and it’s badass

[@centuian]

that would be sick ill take it to work hahaha

[@jamesandonian7829]

Ricky Revo YEEESSSHHH

[@outerzonerc777]

Thank you for such a thorough review! That's how I try to review cars. Awesome job!

[@LVC_RC]

Thanks! Glad you enjoyed the video. 👊😄

[@nomusicrc]

I have the E Revo brushed edition I put a 775 motor in it I’m pretty happy with it but I wondered what the difference between the old and new brushless thank you

[@4WheelRCUK]

Great comparison video. Loads of detail, nice :-)

[@Hinoki_Weitzel]

best traxxas informational video iv'e everseen!! very well planned out and thought out amazing. must have taken alot of time thanks so much!!

[@LVC_RC]

Wow, thanks! Glad you found it helpful. 😄

[@RCsBigAir]

Great info! Gonna get one.

[@rcmodeltest390]

Very true, the diffs didn't fair too well on the previous models

[@fogcityrc4874]

thanks for this...great video!

[@Brinta3]

I can hear the excitement in your voice.

[@grahamhutchins9588]

Awesome video, very helpful

[@nomusicrc]

Thank you for this and not putting music in the video I got the dual brushed version before this came out and I’m happy with it

[@LVC_RC]

No problem man, I'm glad you enjoyed the video! That's awesome, the brushed E-Revo is a great truck.

[@nomusicrc]

Overkill Rc I but the summit first and then a month later they had this I didn’t want it until I took the top off and then they let me test drive it so I bought the display

[@sethpianga4176]

very informational I did decide to go with the 1.0 because it fitted my budget better

[@isaaclyonsf1]

Both look awesome!

[@JAGRCandOutdoorAdventures]

Awesome video! nice shots!

[@davidigra]

Very thorough comparison, thanks for that. It was quite helpful.

[@LVC_RC]

I'm glad you found it informative! Thanks for watching! 👊😄

[@CandanCamgoz]

Thanks realy helpful for my rc hobby🖒

[@edumacaco1696]

Twin brothers exchanged sneakers and t-shirts lol. Vry good vid

[@kylecaldwell6818]

I had the rod end problem with my 1st gen erevo after about 3 years, i ended up super glueing the new ends onto the rods before putting them back onto the truck but i made sure to realign the ends before everything dried, but after jumping it a ton of times and letting my friends beat the living hell out of it i havent had a rod end pop off yet, also i put tiny zip ties around the rod end to help prevent the rod end from splitting down the side

[@dmilnes7007]

Great video thanks. I just bought the 2.0 today. Can't wait for it to get here.

[@LVC_RC]

That's awesome! Have fun with it, the E-Revo 2.0 is an excellent vehicle. :)

[@y_us_12]

Thanks. Useful info

[@generalrepair8731]

Best video I found for the comparisons. Watch this one guys. Very nicely said.

[@RcBasherBoi]

Great comparison.👍

[@Megasty15]

I have a set of the 3.3 tires. They are nearly the same size as the EXT's. Same tread thickness & they feel very similar as well. They haven't been run for 2 yrs now but they still feel up to it

[@LVC_RC]

Megasty15 Nice, I’ve heard some good things about those 3.3 tires.

[@Megasty15]

I've had these tires for over a decade now & they have about 8 years worth of use between my E, 3.3, & Summit. They have even seen 6S action on the E-revo when I blew the shock tires. I can't think of another stock tire I've had as much history with as these. Maybe that's why I still have them.

[@LVC_RC]

Wow, that's pretty amazing. Hey, if they work good, you might as well keep them as long as you can!

[@Megasty15]

I just gave them a quick run on my Kraton on 6S. A few quick dustings to see if they would hold up then nothing but full speed passes down the block. They are amazing. They balloon a little, but I have full control. I can't believe I had these sitting in the closet for 2 years.

[@fabianrengelink2662]

That rubber cap on the transmitter box is for easy binding when necessary. 😉😉🇳🇱

[@isiahsmith4927]

Hopefully they Make a Summit 2.0 soon

[@LVC_RC]

That would be cool to see. ;)

[@moistavocado2350]

Same!

[@complexandcooltechnology2049]

They did

[@xWORLDxCHAMPIONx]

Planes Cars and drones did they?

[@festushaggen2563]

Traxxas has my money as soon as they make one. Love my Summit and I'll never sell it but a brushless Summit 2.0 would be awesome. I think it's long overdue.

[@ponyboy2195]

I love my 1st generation revo still all original parts had it for at least 4 years now

[@FulTrotl]

Nice video man. Could you please test out the parts compatibility more (meaning removing the parts like A-arms, shafts, etc.) from 1.0 chassis and putting it to 2.0 chassis? I know it would take some time, but you would be the first person to do that and that's worth something, at least some KZbin views.

[@RallyandTrail]

Nice video man 👍🏻 Does the new erevo have a centre oil filled diff ? Thanks

[@cam872k3]

Before even watching, I will say, yes! It is worth it! I paid over $700 for my gen1 e-revo and never regretted it until this came out! The gen2 is $550 at most retailers and solves many of the issues the first one had. -I've blown up countless rear ring and pinions, gen2 comes with larger, stronger gears. -I added larger tires from proline, gen2 comes with larger tires. -I destroyed the plastic axles and traxxas crappy steel axles, ended up with mip axles, gen2 comes with steel axles that are probably stronger than the steel offered for gen1. -I added a center differential, gen2 comes with a center diff. -I kept melting spur gears due to over heating the slipper, so I tightened it so much that it wouldn't slip, gen2 comes with a cush drive. I was contemplating replacing all my gen1 parts with gen2 parts, but by the time I do all that, I can buy a complete gen2!

[@chasebaxter5846]

What issues did the first one have?

[@cam872k3]

@@chasebaxter5846 Edit: I just realized I said pretty much all of this in my original post. Gen 1 was pretty solid out of the box, but one of the first modifications I did was larger wheels and tires. If I remember correctly, I went from stock 5.5" tires to 6.5" tall which is like going from 31's to 36's on a full size truck. Soon after, things started breaking regularly, starting with the plastic axles, then the traxxas steel axles. I ended up with MIP axles, and haven't had any problems with those. I also went through countless rear ring and pinion gears. I do think traxxas's casting for those ring and pinions is lacking, but the set I have now has lasted a long time, so I must've found a straight set. I also melted a couple ring gears because the slipper clutch overheated. I tightened the slipper to not slip which contributed to driveline failures as well. So of all the issues I had with parts failures, the Gen 2 has addressed. It comes with larger wheels and tires, steel axles, larger diff's and no slipper clutch. It's upgraded every part I had problems with, and is almost $200 less than I paid for my gen1 originally. I also killed a couple ring gears due to improper gear mesh due to the motor screw loosening. The new motor plate is thicker and has predrilled holes for proper gear mesh with different ratios.

[@Garrysullivanjones]

Should I throw my 1000 upgrade revo version one I trash after reading this. Mine has been in storage for over 2 years because of mainly melting gear spurs , sometimes in one run before having a run, the car is plagued . I retired it this time because the spring cup broke on rear and i said this hobby is piss thanks to traxxas

[@cam872k3]

@@Garrysullivanjones I don't think the gen 1's are trash, I just think it was a little shitty for the gen 1's to cost over $700 US, and the gen 2's to be so much better at only $550. The melting spur gear is due to heat from the slipper clutch. I tightened my slipper spring so tight, that it doesn't slip anymore, to solve that problem. However, doing that, contributes to harshness in the driveline, so you may start breaking other parts. Specifically for that issue, I have looked at the parts diagram for the gen 2 cush drive. I haven't done it myself, but I'm pretty positive one could install a gen 2 cush drive on a gen 1 to eliminate the slipper clutch.

[@s14tat]

the new e revo chassis has 2 bumps at where the diffs are for clearance for the much larger diffs. that is one of the main reasons why you cannot put the new diffs and bulk heads on the old chassis. the rear a arms on the new ones look like beefier extended wheel base arms.

[@RickyRevorc]

Nice job bro!

[@LVC_RC]

Thanks!

[@gorillabeartech4577]

Ricky Revo RC I agree Ricky I gotta get me the new e Revo and the mini e Revo lol

[@SuperSmashHoes64]

The plastic "body protector" on top is also part of the self righting feature

[@superchillisplash1216]

I think old e revo is the same as the new but they make bigger wheels on 2.0 and better spedd an the servo better.

[@lnsvett1]

Nice video. I just bought a used gen1 brushless edition with tsm/tqi . Has a few aluminum upgrades and runs very nice. Thanks for the comparison.

[@Garrysullivanjones]

Does your revo have all issues fixed that were mentioned ? My main problem is slipper clutch eats spurs on regular . Bloody annoying stock traxxas

[@olds97lss]

Converting my v1 to a v2 made me really enjoy the ERBE again. I ran my v1 on 4S only and had to replace the sliders 2-3 times a year due to stretching/wear/breakage of the yokes. Never even tried 6S in it. After getting a v2 roller and transferring my old motor/esc/single servo and a few other misc things, I've only run 6S on it and it's a beast of a truck. Kind of bummed I couldn't transfer my RPM arms/carriers (true track on the rear), but the stock arms/carriers are holding up surprisingly well. With the v1, I would bust the carriers or arms within a pack of run time. Unfortunately, on the 3rd bash, my mxl-6s esc died. Lasted 3 years on 4S in the v1. I replaced it with an old HPI F360C (MMv1) which got me by for a while. It was pretty chattery and would lurch on me sporadically. The old motor really howled on 6S. Not sure if it was the bearings or something else (never had it apart in 3 years), but I replaced it with an arrma blx 2050kv and increased my pinion from 16 to 18 to make up the difference in kv. I just finished installing a max6 esc in it. Will see how that does. A bit overkill, but should let me gear a bit taller yet without overheating. The MMv1 did ok and didn't run overly hot, just felt very unrefined and wasn't waterproof. I conformal coated it, but will just keep it as a spare.

[@b00___]

i’m gonna just continue to mod the shit out of my 1st gen

[@hirthirthirt1693]

And what did you do, I want to upgrade mine as well, Sir. Espcially axles and diffs as it will be a 6S-er

[@kadenlane2523]

Exactly

[@Garrysullivanjones]

I did all that shit to my version one revo. Waste of money all the telemetry crap. Revo shocks are crap and break to easy. Brittle crap.

[@crazyrusty7688]

@@Garrysullivanjones I agree 100%, my 1st gen E-Revo is all decked out and it’s been my #1 go to backyard/track basher, my buddy had the 2.0 and it instantly became a money pit cause it kept breaking

[@taevy12]

I've invested too much money in my old erevo. can't get the new one. you are right about the diff though. you have to ship shim it

[@olds97lss]

The shock ends and shock caps are beefed up as well. If you hold them side by side you will see around the ball, the plastic is thicker on both.

[@anthonyarnold906]

First side by side I have seen. Props to you brother. I’d say they are worth buying especially since they finally lowered their prices and are now more competitive with other companies. I’m not a traxxas guy by any means but so far I like the new revo

[@LVC_RC]

Anthony Arnold I completely agree. This truck seems to be drawing some people back to Traxxas which is cool to see. It’s a great truck for the price. Thank you, I hope you enjoyed the video! 😀

[@juanmacantarero3884]

After 3 years of use of e-revo 1.0, have you had any problem of roominess of any kind? Maybe at the direction or other sites? thanks, great video!

[@TodoInventosTV]

Today run my E-Revo 2.0 first Time in Flushing Meadows Queens, come to edit the video and upload

[@coreypreston457]

I'm new to the rc hobby grade car I just got my first truck the rustler 1.10 model I wanted a revo 1.10 couldn't find it have traxxas stop selling them they only had the small one great video still years later

[@phk818]

Great video

[@AxiomaticPro]

The rubber piece on the receiver box is so you can bind your radio without having to take apart the receiver box! Pop out the rubber piece and you can use a screw driver to hold down the bind button on the receiver.

[@LVC_RC]

Axiomatic 113 Thanks for letting me know! I was thinking that it might be for that, but I wasn’t quite sure and never took the piece off to see if the button was underneath. 👍🏼 I appreciate it!

[@alimaleki217]

Excellent comparison!

[@yugorc2248]

Great review

[@LVC_RC]

Yugo Boss Thank you!

[@PtakLight]

The rubber tab on the receiver box is a carry over from many years ago with AM/FM and having crystals to change radio frequencies to not accidentally drive your friends truck into a wall 🤣. The have been using this radio box since the original tmaxx .15 I believe. I know my first bandit and stampede didn't have boxes for the receiver and I added them when the tmaxx came out.

[@omardennaoui]

Great review. How do you compare the 2.0 VS. the new Maxx?

[@sarahdeeks7306]

Good vid dude👌🏼

[@LVC_RC]

Thank you!

[@stevemitchell7193]

Great comparison, still tossing up on whether E-Revo 2.0 is any better than fully ungraded Rustler 4x4 VXL. I think i am just looking for an excuse to have both!

[@Bigheadguyfromsmolmovie]

I found a good deal for the original so i checked this vid out. Awesome review.

[@shanemcglashan8822]

Can you PLEASE check if those driveshafts will fit old erevo. This review is amazing btw :)

[@Chaseblackburn7]

i honestly would rather have a plastic chassis brace. Because a little flex is better than zero

[@mrTIMMBUR]

Haha..... keep telling yourself that. Your going to have a taco for a chassis after launching 40 feet in the air. Oh sorry, my bad...... forgot, this is a Traxxas, you guy's dont blast, you just bash....

[@Chaseblackburn7]

Mad Man Slice First of all who is the one going out of buisness because they cant come up with one of there own ideas to save there lifes.... Arrma. You Would want more flex in a chassis so you dont have it break on half, why dont you get of your keyboard and. go outside and TRY to jump ANY rc 40 foot without breaking, it will break nomadder the brand. Traxxas works there ass of to create BEASTS, alot of engineering goes into a traxxas vehicle, Unlike arrma where EVRY vehicle they make is copy and paste!!!

[@mrTIMMBUR]

Yawn.....

[@bradylorenz5219]

OverkillRC why are you talking about copying when you literally have the same name as the person that uploaded the video lol

[@rgqban6380]

OverkillRC than suspensión on the revo is old, it actually came from monster trucks and also vintage tamiya. Traxxas just brought it back to life on the revo and Arrma made the Nero base on it but it’s not even the same dimensions, But traxxas patented their parts and that’s where the problems started

[@based_will]

I have rpm bearing carriers on mine and the same rear chassis brace

[@sizzorjack]

I have to be honest I'm still in love with the first one.

[@panwellz645]

True

[@nfconstruction1087]

I have a revo 1.0 had it for a long time broke several driveshafts can’t even count them anymore haha, do you know of a parts list that are interchangeable between the 2 I can’t seem to find any info recently lost a rear diff wondering if 2.0 will fit it

[@shadowdemon5730]

I've been out of the rc game for @ 5 years. Decided to take a look online and see what's up. And this new Erevo 2.0 has my full attention. But all the online dealers Ive seen say that it's pre-order only. Not gonna be available until next month.

[@LVC_RC]

The new E-Revo is an amazing truck without a doubt. It's a tough vehicle to get though. There was a small shipment sent to hobby stores but they sold out very fast. It's a bummer to see that they've pushed the date to next month. It's definitely worth the wait though, you'd love it!

[@loose-hotline5026]

I want an e revo but I don’t know if I should save for a wile and get the 2.0 or get the mini vxl and also there is the new rustler vxl 4*4

[@richardcalf8337]

I recently bought the new e-revo. The dogbones notch out the drive cups after a good few runs. but I think this is a problem with many big power rc trucks.

[@rcpatapouf]

+1 suber, liked and subed !!

[@9_19Ming]

I got one, a brushless version. i love it so much !!!!💙💛💚

[@Sloppyjoe96]

i wander if people with old revo can put the new Maxx diffs in theres

[@stradale1310]

Damn the 1st gen E-revo was my childhood dream unfortunately I can't buy it anymore 😔

[@Anthony-rh7dh]

If you buy the e revo 2.0 tires for the first e revo, would the size difference affect the steering ? Like would it scratch the body or can you run the new talons on the old e revo?

[@paulcherry1520]

Awesome job can't wait to see if the diff and bulkheads will swap over with a little modding or just buying chassis bulkheads and diffs

[@Deaner3D]

it doesn't look like they'll be swappable. The new diffs seem to be based of Xmaxx design which IMO was really needed. The V1 diff was really a minor upgrade from the old revo nitro(added dogbones to help stabilize).

[@paulcherry1520]

Dean Cripps yes I know just straight up they wouldn't fit in the old erevo chassis and bulkheads I mean like new chassis and bulkheads transmission and then move over the old stuff have to use the cvds and axles from the new one

[@markweinberger3693]

I have a nitro 3.3 version. I think most of the parts will fit this 2.0 right ?

[@vitallibell8363]

I love it men and nice video

[@coasterfanatic3441]

I’d take the 1st gen all the way

[@hirthirthirt1693]

Not when you get a 2.0 for 300 bucks including charger, lipos, hopups and 4 sets of tires

[@happyhappyjoyjoy6563]

rubber plug to hit the link button without removing cover..

[@brandoecobb1919]

Love it

[@barharborbasher249]

Excellent job on the breakdown Garrett👌🏼 2.0 deafly looks like it’s a major step up from the original but I figured Traxxas would’ve got a little bit more creative ...

[@LVC_RC]

BarharborBasher Thank you! Traxxas did a great job with the improvements on the 2.0. I have to say, I expected a few more changes as well. It would’ve been cool to see them get a bit more creative like you said. It was awesome to see them carry over the X-Maxx style parts, but a unique/new idea would’ve been cool to have.

[@barharborbasher249]

Overkill Rc Agreed 👍🏻 I think they should’ve definitely increased the battery compartment size because the 8s version will be next.. Then again Custom thin factory “ Traxxas “ batteries might be a marketing angle 😁 I’d like to see a AvE style video testing the V1 plastic vs V2 maybe that’s my nitch lol Traxxas definitely has been killing it !!!! Too bad they don’t have any competition 😑 keep up the great videos bud👌🏼

[@barharborbasher249]

Time for a comparison video over the V1 vs V2 diffs and gearbox 👌🏼

[@xmaxxfan1857]

I have the Revo 2.0 I really like it they should make one the size of the xmaxx now that would be an awesome trk and call it the XRevo

[@thundergun100]

Im like super late but the hard rounded plastic on top of the E Revo 2.0 is also for the self-righting ;)

[@krc073027]

Just got one thanks for info

[@gorillabeartech4577]

I'm keeping my original E Revo but I am deffinately buying the upgraded xmaxx different version !. Self riding, not having to fix or get rpm parts right away.... Stripping..... Forget about all of that repair if I don't have to do it at all!!!!!!.

[@rcconnection4421]

GORILLA BEAR TECH self riding? I think you ment self righting.

[@facehunter504]

I love my E Revo 2.0.. I have the mini and love it and have driven the 1.0 a few times. Doesn’t even compare, the 2.0 has me wanting to sell all my Rustlers, Slash’s and whatever else it’s that amazing

[@LVC_RC]

I completely agree, Traxxas did an excellent job with the E-Revo 2.0 ;) Thanks for watching!

[@facehunter504]

Overkill Rc I’m selling all my other cars I decided. It’s that amazing. But thank you for providing helpful info for us.

[@LCNismo]

I still have my revo 3.3. with os21. I'm thinking about the new one

[@codenamethecleaner7519]

I have never broken a axle or diff in ny V1 and have been on a stronger 6s system for 2 years

[@LVC_RC]

Nice! It's all about throttle control. :)

[@Deaner3D]

I can't believe this - I was going through diffs but I think that was down to Trench tires, metal axles, and driving a lot in the wet. And...yeah, my poor throttle control.

[@codenamethecleaner7519]

Dean cripps ya idk i dont take throttle lightly but dont drive in wet areas i have stock axles but the most ive broken was a suspension link, shocks, and axle carriers no diffs or axles though

[@paulcherry1520]

Jojo Aguilar yeah I never had any issues with my diffs either untill I put threnchers on it , and now I just don't use them and I have a slipper elimnator and still everything is working great when I plan on using the trenchers or jumping it hardcore I throw the slipper setup back in I'm thinking of waiting a awhile and grabbing a erevo 2.0 roller on eBay and moving over my electronics

[@codenamethecleaner7519]

Paul cherry yup ill wait awhile and wait for part support and then get one but my v1 is totally fine so idk yet

[@BigWillieFPV]

Watch a few videos on the new truck but no one mentions the Tx is it the same or has it been upgraded can you still use your phone does it now have a lighting connector for newer phones?

[@LVC_RC]

Big Willie FPV It still has the exact same 2.4GHz radio. The Bluetooth module comes separately, but it is an option at least.