New WE Browning Hi-Power MK3 MKIII GBB first look (Airsoft)

[@wasdasd100]

Thank you for making this review. Now I'm not afraid to get it anymore. WE has been hit & miss in the past but I think this is worth a shot (despite the hop up) and I've been waiting for a proper mk3 for too many years now. We'll see how it lasts in the long run.

[@Airsoft-ED]

Thanks. Yeah, not many other choices are there. My other WE pistols are great and even though this one isn't great out of the box, a little work can improve it. I will do another video showing how to do it...

[@osram2739]

@@Airsoft-ED would love a video doing that, too many tell us newbies about their Mods but don't teach us 😂

[@Airsoft-ED]

@@osram2739 OK see what I can do 😉 (On this pistol there aren't many mods but I'll explain a couple)

[@jimbob465]

Watched this from America with a real hipower on my hip. Had to pause to compare, this is scary accurate.

[@Airsoft-ED]

Thanks Jim. Yeah, I'd love a real one but with this one I can have fun shooting my friends without making holes in em 😄

[@sierrabravoairsoftevents]

Weathering looks great! Good review, very informative, thank you for giving me the heads up that I had mistaken the operation of the hop unit on my video!

[@Airsoft-ED]

Cool, thanks for your feedback 👍

[@unknown_1018]

Great review. Look forward to future content.

[@Airsoft-ED]

Cheers. Good to know its not a complete disaster 😆

[@osram2739]

Really nice review man, could maybe point the camera down a tad so the pistol is more central to the screen and we can see everything, but it's a great review and you've def gained a sub! Any chance you could add subtitles as I'm a bit hard of hearing but if not no worries as I can make out enough to get along

[@Airsoft-ED]

Thanks Osram. Yes, I realised the camera was a bit high afterwards but couldn't do it all again. I'll fix it for the next video. You should be able to turn on subtitles. First icon bottom right.

[@clivestrachan]

Love this model and I have always liked WE I have many models from them including a 1911 made before the ukara came in to practice and it's sill working , u can see a slight difference in the build quality the old is more tough but I still rate them , I can't wait to this lockdown to end so I can renew my ukara so I can treat myself to one of these and a set of the vx-9 hitman guns , I think the worn in look is best as well good vid 👍

[@Airsoft-ED]

Thanks Clive. Yep, I've got a few WE's and I like em a lot. Unfortunately the hammer mech design in this one (and the older P35) is not very robust. When you get one make sure to pull the hammer back a bit before inserting a mag. (I may do another vid explaining this and how to strengthen the hammer mech a bit)

[@clivestrachan]

What company did u use to get the marking I have a load that I would like to get done in mean time while I wait for clubs to open

[@Airsoft-ED]

@@clivestrachan I just searched for a local engraver and took the slide to ask if he could do it. Make sure they'll actually engrave rather than just etch like mine turned out.

[@grahambamford9073]

Nice hi power I know it's not real, but keep your finger off the trigger when not planning to shoot it. Rest it on the outside of the trigger guard. Most shooting accidents happen because someone had there finger unintentionally resting on the trigger. It's just a bad habit to get into.

[@Airsoft-ED]

Yeah, I'm usually quite good with trigger safety.

[@captaincodpiece3263]

It does look a lot more realistic with the worn look

[@Airsoft-ED]

Yep, I always give em a bit of wear.

[@umarcem]

Nic3 for first video. Looking forward for new video. Also we m9 using same hopup system. Mine m9 also have poor accuracy. What did u do to fix it ?

[@Airsoft-ED]

Sorry its taking so long. I will do a video soon. Unfortunately there isn't much you can easily do to improve it but I found a way that may help a bit.

[@umarcem]

@@Airsoft-ED I'm ooking forward.

[@Airsoft-ED]

@@umarcem See my new video about how to improve it (a bit)

[@umarcem]

@@Airsoft-ED not perfect solution but it will matter. Now i will fix it. Thx.

[@kenthethistle]

I can't get my outa barrel out yet other videos the barrel comes out no problem

[@Airsoft-ED]

Yes, it is tight on mine. Luckily I haven't needed to remove it. If you really need to get it out then you'll have to carefully wiggle it as you push it out.

[@lli976]

Hii! I would buy it, but only for decoration. I do not want to fill it up with gas, just racking the slide or take in-out the mag. What do you think, is it good for it or the possibility to get an absolute lemon is high?

[@Airsoft-ED]

I've just bought another one and it works OK so I think its safe to buy one. (Test before throwing away the box) The tip I would say is to pull the hammer back before inserting a mag. You can manually lower the hammer once the mag is in.

[@qrw460bhv6]

Now what is the best pistol out of the box.....

[@Airsoft-ED]

I'd say the AAP-01 is the best pistol for a good price. You can spend a lot more and it won't be much better.

[@qrw460bhv6]

@@Airsoft-ED Even compare to TM Gold Match or AW Split Slide? How about Novritsch guns?

[@Airsoft-ED]

@@qrw460bhv6 Haven't tried those so can't compare but the AAP-01 is certainly the best pistol for the price.

[@mikaelsoppa]

Can this hi power be adjusted to have a ring hammer like the GP35?

[@Airsoft-ED]

Yes, you can buy the ring hammer separately and is a direct replacement. (I actually did this too) Bought from: www.kyairsoft.com/parts/we-pistols-gbbp/b-series-mkii-mkiii-hi-power-browning/b-series-hi-power-browning/b-series-hi-power-8.html

[@mikaelsoppa]

Thanks, You should do a video on it as well.

[@Airsoft-ED]

@@mikaelsoppa I may do 😉

[@dangermouse1626]

Good review, You mentioned about trade marks, do you know anyone who can do that?

[@Airsoft-ED]

I just searched for 'engraving' service near me. I found one and had it done but it was only etched and not properly engraved. I'm happy enough with the results because it was cheap but if I had to do it again I would check that they would do proper deep engraving.

[@BeanMartinVEVO]

Are the magazines proprietary or are there other magazines you can use?

[@Airsoft-ED]

They are specific to the Hi-Power. I think you can use the magazines from the older version GP35 but you'll have to check that.

[@bobbybeegan3651]

First mag hammer back and gas knocker broken € 149.00 A heap dirt. Kicking myself I spent hard earned money on on this shit.

[@Airsoft-ED]

Sorry to hear your bad luck. You should be able to return it to the shop for a refund

[@wsiur_gaming]

how many times did it break to this day?

[@Airsoft-ED]

Just once so far but I haven't used it much since replacing the broken part.

[@wsiur_gaming]

@@Airsoft-ED thank you for answering, would you reccomend this pistol for a beginner?

[@Airsoft-ED]

@@wsiur_gaming Any other pistols are easier to use because they don't have the same problem with the magazine. (See my other video) But if you want a Browning Hi-Power MK3 then this is the only choice. Don't get anything Co2 powered

[@wsiur_gaming]

@@Airsoft-ED why shouldn't i get co2?

[@Airsoft-ED]

@@wsiur_gaming Because it works at much higher pressure than green gas so everything from the mechanism in the pistol to all the valves and seals are under much more stress. If there is a leak or problem then the gas bulb cannot be removed until its empty so its wasted. You will waste Co2 bulbs until all leaks are fixed.

[@AmbiAmphib]

Where did you find this one? All I've found were the ones with the adjustable rear sights, though I like those Hi-Powers, the MK 3 looks nicer.

[@Airsoft-ED]

I got mine from Bespoke Airsoft in UK (Oh, it sold out already. Keep looking as shops will get more stock soon I'm sure)

[@AmbiAmphib]

@@Airsoft-ED alright, thanks

[@Airsoft-ED]

@@AmbiAmphib Have you seen its back in stock at Bespoke

[@AmbiAmphib]

@@Airsoft-ED oh wow, thanks

[@青地秀通]

コレってタナカのシリンダー径を少しだけ大きくしたピーコ？

[@Airsoft-ED]

田中の詳細はわかりませんごめんなさい

[@harry25162136]

Is it full metal construction ?

[@Airsoft-ED]

Yes, its all metal

[@kingpinstewie4961]

Are you able to change the grips?

[@Airsoft-ED]

Yes, there is one screw holding each side on. I don't know if the wood grips would fit without modification though.

[@kingpinstewie4961]

@@Airsoft-ED I might just spray paint the black ones wood

[@kingpinstewie4961]

@@Airsoft-ED also is it still working for you? Have you had any issues?

[@HHBALMun]

Satılıkmı

[@north-eastassamwildlife7756]

How many price of this gun sir

[@Airsoft-ED]

You have to look online or airsoft shops near you

[@SuperEvilMonkee]

Range?

[@Airsoft-ED]

Not had a chance to test full range but it looks like it could do 30m quite easily so possibly more. The problem is getting the hop adjusted properly.