Newer Chevrolet Silverado Gets Nasty Audio Sound System Fixed and Upgraded by the Pros. EXPOSED!!

This customer brought us his truck that had a full sound system consisting of 2 amplifiers and 2 subwoofers and 4 new speakers. The client complained about the quality of audio and messy install. What was discovered was a shame that any audio shop released a vehicle as such!
Moving Forward...
we have installed a beautiful 3 way active system consisting of
-Helix v eight mk2 DSP processor amplifier
-Hertz mlk165.3 Mille Legend components
-Hertz ml700.3 3' Mille Legend Midrange
-Hertz Cento cx165 rear fill coaxials
-Audison sr1.500 amplifier
-Kenwood Excelon ddx6906s
Everything was completed running all speakers active without any crossovers and retaining all factory feature such as cameras and volume controls on new stereo as well. the difference in install quality and sound quality in night and day. We hope you enjoyed this video!

[@brianwaller7383]

I’ve been having stuff installed in my vehicle for years. And I kid you not every time I always had something go bad. I stopped going to audio shops and started doing diy.

[@HvyMetal4Ever]

Anything worth doing is worth doing right, and doing yourself. Besides, any extra you would be spending on labor can be put toward higher-end equipment.

[@TeddyStage3motowerks]

Imagine paying all that money for "quality" parts, only to have a dude throwing boxes around for views. If youre doing that in front of a camera i sure would hate to see what you do when someone's not recording.

[@wizardindustriesusa]

I came in for this comment. He obviously does the equipment no favors by slamming it down like that, but the impression it gives to an observer is probably more damaging to the business.

[@EM0601-x4h]

Your mind would be blown if you seen how fedex and dhl handle all this stuff lmfao what buddy did was nothing

[@twizzian]

I’m not sure I’d let you do my install after seeing you chuck and slam those audio boxes

[@deepredstate4414]

I thought the same thing and actually couldn't get through the video because it was so unprofessional...

[@Sacriflst]

You do realize the boxes were probably empty lol

[@hueroski]

Did the customer take it to a 3rd shop?

[@audiolux6009]

There was no need. Satisfaction and quality was achieved :)

[@-Primer-]

Drywall screws holding the 3" down. LMAO ... 3:14

[@HvyMetal4Ever]

Right! No wire ferrule's drywall screws holding in speakers.

[@shawnroddick7523]

I am not generally for bass knobs but I like that idea. I like my radio to be able to control the bass.

[@RyanBassForLife]

I wire everything myself and if I dont like it i changed it myself.

[@kimberlydonaciano1377]

Dude just yeets the DSP on the table 🤣

[@wallheadkdir]

😂😂😂😂😂😂

[@Punkinspapa]

Tad rough on the new equipment. Geez!😫

[@805SantaPaula]

Thats some Serious shit right there.. Nice job

[@Urbaneism]

I'm taking my whip there. I know they going to do some dope work. I'll return here to tell yall how it goes 💯

[@audiolux6009]

We are looking forward to it!

[@lovelivelaughbgreat9626]

I'm going through this now with a Ford edge

[@josephbryant1082]

I bet the owner did the installation lol

[@jessienavarro1431]

Need a dual alternator bracket for a 2020 Chevy Silverado 2.7

[@romans116notw]

Looks like they went to Bobs car audio in Torrance Ca.

[@johnnydough8841]

I’ll bet the customer installed it

[@kuntryboy33]

Good place to mount amp so it can be kicked and get dirt on it and inside of it. Why not install it behind rear seat on back wall

[@audiolux6009]

No feet can reach these amplifiers, shorter run to signal and batteries, easier serviceability and dirt isn’t really anything that is flung on the amps under the seat in most situations. This comes from over a decade of us using this method, so we ask you to trust us :)

[@shawnmcclure7282]

Do u guys have a full video of everything u did

[@orlandothom]

How can I get in touch with you I have a 2018 Chevrolet Silverado I like everything that you put in that truck

[@audiolux6009]

Reach out to our direct line. We are open Monday-Friday from 9am to 6pm. Our shop line is 6198203778

[@TheSkunk1996]

What state are you guys located?

[@1904audio]

San diego, ca

[@soggybottomboys2792]

So wyd about the under seat ventilation? It’s going to be fine in the summer but the winter your going to be blowing +80° air on that mf

[@paulmarciello6822]

Would of taken it to a 3 rd shop after all the new components being thrown and slammed on the table smfh

[@audiolux6009]

haha 😂

[@Nelsonbv3]

What does something like this cost ?

[@gregcastorena9438]

What's the link for the speaker on the dashboard

[@caseyturner8773]

So how do you get the factory bose to send a frequency below 30hz?

[@caseyturner8773]

Ill pay you for this answer

[@ENCXBG1]

You probably can't. You can boost it if it just rolls off. An Epicenter is probably the only answer.

[@BubbyPlaisan]

No Bose?

[@TheTexan99]

The Bose system Chevy puts in there trucks hit so hard 💯🤷‍♂️

[@MomJeans2]

@@TheTexan99 lmfao

[@EMJ1472]

Where ya at bro I need some work done

[@audiolux6009]

9551 mission gorge rd santee CA

[@mponce661]

Are the mids and highs hooked Up to the head unit or to an amp ?

[@squarebodyseth5986]

Hope all the extra comfort features were to his liking before you took away his ability to change them with that new headunit. No reason at all to replace the headunit on these just needed a better line output converter and wiring.

[@johnjesus971]

Hmm never heard of Idata Maestro RR, huh?

[@squarebodyseth5986]

They dont do the job for what im talking about, learn the vehicle before you spat out nonsense.

[@johnjesus971]

@@squarebodyseth5986 haha OK what features can he not change in his Silverado? The Maestro RR will retain all the features. Including, backup cam, steering wheel controls, all your HVAC controls (through the head unit) and any other settings you could do through the factory radio. Also who tf wants to keep a POS factory radio.

[@wallheadkdir]

The amps stacked was bull shit but them wires were purposely made long for easy in an out of the amps an the wires looked well managed....nice try tho trying to add to the list of bullshit instal

[@audiolux6009]

We are going to disagree, wires long would mean improper disassembly and laziness to have a near tuck install. Amps don’t need to move in and out obviously. Once they are set properly in tune, really, no reason to touch them, regardless, you are entitled to your opinion, and to assume that it was a completely fine, install without having seen it.

[@brettbarnett9823]

Ballpark figure on $$ of this install?

[@audiolux6009]

Ranging from around 5k-7k depending on certain choices of components and of course personal preferences

[@juliosandoval8244]

5k to 7k ouch that seems to high

[@chrisburrows6989]

Way too high

[@agugabri14]

You could get better quality for roughly 1k, plus doing your own labor!

[@orlandothom]

What brand 6 by 9 did you use

[@donearl6675]

😆😆👍👍

[@juliosandoval8244]

Hahaha thats kustom I just did the same truck this weekend but I installed 1 high n low adapter with a passive eq 9 band sounded bad as

[@johnnydough8841]

Yawn