Nez0's Bad Shoppe @ Strickly Sidewayz: MST RMX 3.0 KMW

I decided to setup the car with half of it as the out of box spec and the other half lightly tuned as per the previous owner's settings which worked out excellent :D Basically it's a mix of the High Center of Gravity Modes #1 and #3 in the manual. The was some optimization done already before I purchased this car in the steering geometry and suspension settings and I liked what I seen so I stuck with those settings. I will change some later on as i drive this car more but to be honest it is just epic as it is. Feels nicely planted and I can whip it around as I please..."point and shoot" as my test driver said during his runs :D I'm happy to own this car and add it to my fleet of limited edition machines :D I must choose a body and electronics to keep with this car so I can run it whenever I want. There is also a good amount of weight shifting going on as well and that also makes me love it. I can see where the RMX 2.5 has gotten some of it's design and setup from this RMX 3.0 and that is a good thing because the 2.5 version does work quite well from the RTR and RS models I have driven. Expect more videos of this car on track and in comparisons. I really do love this car and if you get a chance to own a KWM edition MST chassis...just do it ;) Shoutout to Team Strickly Sidewayz Driver Steve A. for sending this machine around the track :D He said this is the first MST chassis he really enjoyed driving :D Thank you for watching! Enjoy the video!
Equipment Installed:
OMG Polaris DR-120A X3 2023 Purple ESC (Boost Enabled)
OMG EPIC-2 10.5T Bad Shoppe Edition Purple Brushless Sensored Motor
OMG Predator NBS-LP-16BF Bad Shoppe Edition Purple Brushless USB Programmable Servo
Yokomo Drift Performance V4 Gyro Purple DPP-302V4P
Futaba R304SB T-FHSS 2.4Ghz 4-Channel Receiver
Futaba 4PM 4-Channel 2.4Ghz Radio System
Yokomo 3500Mah 100C 2S LiPo Battery
Yokomo DRC Tires Mounted On Topline 7mm Wheels

[@curtisknudson8966]

Congratulations!!! It's Fantastic!

[@BadShoppe]

Thank you v muchly! :D

[@sidokter]

wow nice drift !!!!! one question, how this mst rmx 3.0 compare to yokomo md 1.0 ?

[@BadShoppe]

Thank you :) They both drift on a super high level. The RMX 3.0 released a few years ago, MD 1.0 is new generation mode. Biggest difference is the RMX KMW 3.0 has a nice limited edition plate with a number :D

[@MrKampa]

Yees

[@jimmorrison5574]

I have #255 with full onisiki electronics, I do want to try acuvance esc and motor next tho.. do u have a setup sheet you can post somewhere?

[@BadShoppe]

0o0o very nice! So far no but I need to translate the car's current settings to a setup sheet :D

[@Validsmokey]

Hey do you know where I can get a MST RMX 2.5 RTR straight from the company? I’ve gone on their website but I can never find a checkout, it just shows specs and support.

[@BadShoppe]

From MST directly I don't think it is possible. Your best bet is 3rd party suppliers.

[@joshuacollins789]

This makes me want to go with an MST. I’m debating on getting a yokomo rd 1 kit and build it or get the MST RTR rmx2.0 that rocket bunny e30 looks so nice. Or I could get an MST kit. I don’t know I had an hpi drift set up years ago but sold it. Just recently got a basher gifted to me and really want to get back into drifting.

[@BadShoppe]

The MST RTR's are minty, RMX 2.5 RTR is my top fav RWD RTR currently for fastest way to go RWD drifting from the box. If you like to build both Yokomo and MST do well with overall quality and selection. I did go with the E30 RB RMX 2.5 RTR myself :D

[@joshuacollins789]

@@BadShoppe o nice I wasn’t aware of the 2.5 rtr I thought that was only a kit. They must of just came out with it I wonder how long a pre order takes from amain.

[@BadShoppe]

oh yiss they have a few versions of the RMX 2.5 kits and the RTR version too. Some versions are already discontinued but were just replaced with refreshed versions.

[@spinrushrc]

Which YoKoMo kit do you recommend? I LOVE BLING! So I want something that has Titanium Screw Kits, lots of anodized aluminum. BLING! Any recs?

[@martinjagger5362]

Hey buddy where can I get those rims/tyres.......from in that sick pink🤙👍🤟💯

[@BadShoppe]

Howdy :D The wheels are Topline "N Model" Ver 3, they do a couple of colours and in several offset sizes from 5mm to 8mm. THe tires are Yokomo DRC "C" HDPE drift tires :D

[@martinjagger5362]

@@BadShoppe thanks 👍👍 buddy .....💯💯

[@MRJZA75_34]

This compared to the MRX gt or Sakura overdose or MD 1.0?

[@BadShoppe]

This RMX KWM 3.0 is in my opinion better than the MRX GT, D5, MD 1.0 and the Overdose GALM from the out of box spec. With tuning it will be right up at the top with any other highly tuned car. The price point and limited # editions make it harder to purchase however.

[@robertoricardo182]

Hi Nezo, can be tricky question but in your opinion what the best chassi you already tried? Balance, feeling, weight transfer, etc Best Regards

[@BadShoppe]

Hello :) This is a good question, as there have been many chassis that I would consider in the "best" category but for many different reasons. Lots of us agree there is no outright '#1 Best Chassis" but there are some great machines that work very good. Chassis that have stood out for me lately for various reasons have been (in no particular order): -Reve-D RDX -Yokomo MD 1.0 Purple (Coloured) -Yokomo SD 1.0 LTS (Load Transfer Special) -Rhino Racing Shark (RMX Version) -Rhino Racing Rhinomax -MST MRX GT -MST RMX 2.5 RTR -MST RMX 3.0 KMW (#114/300) -3Racing Sakura D5-MR v1 & v2 -3Racing Sakura D5 Mini -TDP PE-One Conversion Kit v2 (Yellow Spec)

[@robertoricardo182]

@@BadShoppe I understand, have so many good chassis today on market. At the moment want to get another one, i like the MST MRX GT but read few times this model is discontinued so i waiting for new Yokomo SD 2.0 to come out next month!

[@BadShoppe]

Heck yiss, SD 2.0 does look nice with the gearbox of the MD 1.0 on it :D

[@DJ.1001]

Got the transmission destroyer + tune up in it. I don't understand why people run their brakes so aggressively. All you're doing is beating up your car.

[@BadShoppe]

Which car are you talking about?

[@HasSF]

Your content is great! (and rare) Have you thought of offering membership subscriptions? I'd be the first to join just for the sake of supporting this hobby.

[@BadShoppe]

Thank you v muchly! I have thought about subscriptions, just not sure what to offer behind a paywall. Possibly full build videos or drifting theory lessons. Any ideas? :)

[@HasSF]

@@BadShoppe Sorry just noticed your response! Frankly, I would be joining to support the hobby first and foremost. :) Full build vids and drifting lessons would be great! And maybe track ideas. Your MD 1.0 constructor vid is super helpful.