FlyWoo FireFly 1S Nano Baby // Rippin Review // So Quiet!!

A hot micro quad! Does it live up the hotness. Don't forget your coupon!!
FireFly 1s Nano Baby Available Below
FlyWoo Direct - bit.ly/3BbbKpk
Banggood - bit.ly/BGFF1sNano (Coupon "BGNickBurns" 8% off)
MakerFire - bit.ly/3gBSklw (Coupon "NickBurns" for 5% off)
AliExpress - bit.ly/3kzjRoY
RaceDayQuads - bit.ly/2Y6d6Ub
FlyWoo GOKU F4 5-IN-1 AIO - bit.ly/3BdhGyf
FlyWoo GOKU Versatile F745 Pro - bit.ly/3zonkNk
Project MockingBird Website projectmockingbird.squarespac...
Full Long Flights
450mah 7:49 • FlyWoo Nano Baby 450ma...
720mah 10 minute • FlyWoo Nano Baby 720ma...
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use the Jumper T-Lite bit.ly/3ohjEXp
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

[@NickBurnsFPV]

How many of you are aware or familiar with Patrick J Clarke's work of Project MockingBird? Lots of EMU tunes currently. Is that a barrier for you? Get The Quad Below!! FlyWoo - bit.ly/3BbbKpk Banggood - bit.ly/BGFF1sNano (Coupon "BGNickBurns" 8% off) MakerFire - bit.ly/3gBSklw (Coupon "NickBurns" for 5% off)

[@MichaelDFPV]

Nick, did you see that Flywoo posted new pids on the product page? I just happen to come across it.

[@SquatchWerks]

@@MichaelDFPV Glad to see they’re listening. Thanks for the heads up! Also from the product page -> Main Changelog from V1 to V1.2 : （Sept 14th ）Modified the design of the bottom plate. The structure of the bottom plate is more reasonable and strong . The battery can be placed horizontally or vertically. Upgrade to GNB27 V2 for better current flow from batt . ( Tips: GNB27 V2 is very tight, but it will become more suitable after a few uses.)

[@infa008]

Hi Nick. I'm planning on getting this in elrs. I have a module for my controller and my goggles atr the fatshark scout goggles. Will this setup work if I pair it all? I'll be looking for the mockingbird tune too. Thanks for the 10 min flight.

[@NickBurnsFPV]

@@infa008 yes it will work as long as that module is an elrs module and the same frequency as the receiver.... 2.4ghz.

[@infa008]

Awesome. Thanks. This gives me added confidence in a future elrs build I will attempt as well. It will be my first build. Happy holidays to you and yours.

[@DoRC]

Haven't watched a video from you in a while. Congratulations on the weight loss man you look great!

[@Director-M]

He's proactively slimmed down in anticipation of the FAA's next weight restrictions.

[@DoRC]

@@Director-M Gotta stay sub 250:)

[@mattheww9656]

I was going to say the same thing - haven’t watched in about a year and wow, it’s dramatic. Good for you Nick!

[@ooOoo.....]

Just found this guy and I love his style... No BS, straight to the point, and 100% useful info delivered at a fast pace (so I don't lose interest or fall asleep lmao)

[@NickBurnsFPV]

Thank you!

[@quadroneld4401]

I love to see that these small drones actually offer the same possibilities as the large variants, all the information needed to make an informed decision is covered, so what more could you want from a review!

[@VentusFPV]

Incredible machine! thanks for sparing. Cheers from Poland!

[@MrE.]

Loving the way all small 1S craft are going, The Nazgul was on a hair trigger but this is going to end up in the fleet I feel! PJC/PMB rock! Cheers, Nick!

[@JohnCuppi]

I bought one! 🚀 This is an exciting little micro. Always love watching you fly these.

[@sganzerlag]

John, how are you liking this quad 5 months in? I like deadcat frames and long flight times. Seems like it would be right up my alley. Best regards from Brasilia, Brazil.

[@JohnCuppi]

@@sganzerlag I am still happy with it. 👍I did a little video of this quad on my channel as well. I also used it with insta360go2 on it to do some filming indoors for some local businesses, it takes great video for its size and weight.

[@fongfpv738]

Woo! Awesome review and baby nano🚀🚀🚀🚀can't wait to get one!

[@cinemoriahFPV]

Flywoo smashed it with this one! Deadcat frame, awesome camera, ELRS, 1s super long flight time!

[@simonhampton1304]

Would you mind if i asked you a question,with this drone with 1000mW ELRS built in what options do i have for goggles on the cheap do you know,have a real tight budget

[@SummerCrowfpv]

This is so cool. I have a tomoquad sidewinder in 2.5” that I put a naked vista digital system on and with a 3s 650mha batt I get 8 min. With the vista system it’s 93g with battery it’s 145g. When I had analog video on it i was getting 12 min The future is in these little micros

[@MrSmithFPV]

Really nice how you rip this tiny quad in your garden! 🔥👌🍻

[@moreluckthanjudgement8007]

7-10 minutes cruising is wonderful. Superb performance. When I fancy a bit of a cruise, 7-10 minutes would be lush.

[@MegaMathew79]

Nice review Nick! I'm keen to try this one out. Patrick and his PMB tunes are very useful. As a beginner i was about to give up on my betaflight metor 65 until i put his angle racing tune on it, then it was fun as! I found that with emu flight and pmb tunes the whoops felt much more intuitive to fly.

[@JohnFSmitheugene]

Ditto to the comment below; you do look great, Nick! I guess I had not noticed until now. Congratulations! T'ain't an easy thing to do. Love the way this little guy flies (with your hand on the stick), minor annoyances of the tune aside. On that first flight, when you lifted off and then reversed with a cute little snap roll thrown in, this drone had me, for sure. A PJC tune in the works as well? Sold! Project Mockingbird stuff is awesome. Thanks so much Nick, for the review and for sharing the fun of this little drone with us.

[@glenesis]

Howdy, Nick! This bird looks cool! Thanks for sharing - have a great weekend!

[@sixtofive]

I agree with your request at the end. A 2" 2s version would be fantastic!

[@NickBurnsFPV]

Really have been hoping some company would do there own take the the TKS Rocket Race, I have deferred the talks to Kevin, several have shown interest but nothing on the market yet.

[@8BiT_fpv]

Heck yea, nice quad, great flights and review, a project mockingbird tune would be amazing, thanks Nick

[@elvissaraiva7323]

Where can I find the tune for this quad made by mockingbird?

[@dezy8814]

Cool review , thank nick always making great reviews love your content as always . Gonna get one for sure ✌️✌️🙏🙏🙏

[@pksteffen]

Love PMB since my Tinyhawk days. This looks cool. My babytooth is my fave 1s but I’m with you on a 2s version!!

[@keithnerison1017]

Thanks Nick had one ordered by the end of the video, this one looks like fun, with ELRS and great flight times it should only be limited by the video for some easy cruising around the park. But a PJ Clarke Mockingbird tune on this and it will be a beast and probably even more efficient I love his work have four micros/whoops running Mockingbird and love them. Thanks for the review and thanks for helping me spend my kids inheritance.

[@NickBurnsFPV]

lol. Great news kids, we leave you my entire colossal drone collection. :)

[@tomwebber4015]

That's what I'm talking about, a 10 minute flight is what we want .😎👍

[@michaelmatthews6421]

Gonna look into this one. Looks like a perfect 1s cruiser

[@D18racer51]

So glad I ordered one before your review lol😆Thinking I’m going to bolt emuflight on it.

[@tatdj47Buckfpv]

If I won't to know about a quad I watch your videos because you have already done one so happy flying

[@slowentropy4531]

That's a chunky lil 1S battery!! So cool.

[@JohnFHendry]

Another home run for Flywoo it looks like... and @ 20.4g another good reason to hang on to your analog goggles;-) Sweet... almost 10 grams lighter than the Tiny Hawk with way better props and a relatively slippery airframe.

[@northerntierfpv8947]

Great review Nick, i love micros also, thinking about trying out ELRS the more i watch the more I am intrigued with it...thanks again!! Cheers!

[@NickBurnsFPV]

If the budget allows I think it’s a logical next step in our hobby

[@blissbouwerij4033]

Really enjoyed that one Nick! Would have liked an indoor flight of that little guy. Definately want to treat myself with one. Looking forward to see what project mockingbird conjures up, for sure!!

[@NickBurnsFPV]

Yea, I thought about it, but man no prop guards, I have to be very careful not to do an damage or I might get banished from flying inside

[@kevinmahoney9205]

Now this I like! I've been wanting to get into XLRS also. Looks like a good time...

[@Raven187FPV]

Shows just how well the nanohawk x was tuned by emax. Completely different quads I know...but having something pre tuned is such a time saver.

[@ChrisParayno]

But the proprietary nature of emax is what kills me about the brand

[@Raven187FPV]

@@ChrisParayno the nanohawk x isn't proprietary at all.

[@parker1ray]

Just wanted to say, that your channel is one of my favorites. I have 10 5" quads, but have built and purchased 10 or so sub 250 quads! I am hooked on these little rockets!

[@NickBurnsFPV]

Thank you. I am happy to hear the channel is enjoyable to watch.

[@parker1ray]

@@NickBurnsFPV Nick, I have one question on the Flywoo Firefly and all other small 1S quads flying with HV battery. When I fly my 1s quads like the UR65 with 0603 motors, the new batteries sag to around 3.7 volts when starting out. I fly them to 3.3 volts which rebound to 3.4. Is this to low for these batteries? I get around 1.5 minutes on a typical flight. Any advice?

[@NickBurnsFPV]

@@parker1ray 3.4 is likely okay. Ideally, long term we would want to store the batteries at 3.85v. Our 1s batteries don't age well, are the batteries firm and flat? That would be a good battery otherwise its likely past its peak performance. Also the ph2.0 connector on the quad does wear down over time. I suspect if we replace it, some flight time will come back...maybe a lot.

[@Houssam0691]

wow ! nick long time i haven't tuned into one of your videos , you have lost weight !!!!! looks great on you congratz !!

[@volvo850enjoyer8]

Exactly what i tought, Im very happy for you Nick!

[@NickBurnsFPV]

Thank you. Yes, I have been working on being more healthy.

[@Houssam0691]

@@NickBurnsFPV happy for you ! Best of luck

[@jackdaniels7913]

🤯 long time no see I've been out of the hobby fur a min and almost didn't recognize you! Looking good and thanks as always for sharing! 🥃cheers🍻

[@trajanfpv]

Glad you got it, and liked it. They, not surprisingly, did not send me one. I look forward to seeing Patrick’s tune. He always does a nice job.

[@NickBurnsFPV]

Thank you. I appreciate you advocating for the channel. I had meant to give you a public thank you in the video, but I failed.

[@trajanfpv]

@@NickBurnsFPV no worries I am sure that they were sending it to you anyway.

[@da33ie]

Awsome vid. Just purchased one an it turned up today..am excited to take it out for a crash or two!

[@djs134]

Feels like if you tossed that in a happymodel mobula7 v 4 frame it would be a pretty sweet 75mm whoop. 2” version with a 2” prop would be amazing, basically your race rocket build

[@sixtofive]

I was thinking the same thing. I wonder if the 48 mm BetaFPV props would spin on this frame?

[@NickBurnsFPV]

I am not sure we can swing the 48mm prop. I will need to look closer.

[@KOrnhOliO1]

Or, if we took our Mobula7 and tossed it in this frame, we'd have a 2s version of this... That would really RIP! 😎🤘

[@sixtofive]

@@KOrnhOliO1 Good point! Though I think with how spoiled we've gotten on camera and vtx options since then it would be painful to fly through that old aio camera setup now. Still, it would probably be fun!

[@valden]

@@sixtofive thinking the same thing I am..lol I have a set of 08028 16000kv motors and now im thinking they may actually be decent for a light 1s build for flytime. HMMMM. These flywoo motors are probably wayyy better though (and my 08028 weigh like 2.5 grams lol)

[@Dia1Up]

It's so cute. I need it. I was debating on getting a Moblite 7 (I don't have a whoop yet) mostly for flight times, But seeing as this uses the same batteries, has similarish flight times, and is tougher.... I think it's a no brainer

[@BOTGRINDER]

wow it looks like it flys really well, 1s has come such a long way hahah.

[@NickBurnsFPV]

Yes sir! You want one don't you :)

[@valden]

really interesting quad nick! I like that they are introducing more new stuff into the micro scene. I was wondering if the KV on this would be a bit low, but it seems to handle it no problem.

[@NickBurnsFPV]

They do have motors with higher kv, and they are getting emails about a version with higher kv. We may see another version with the higher kv motors, but we will have to wait.

[@nikotttin]

Ahahahah I was thinking of building a 2s! Using some 1102 on 2'' racerx frame and I love it.

[@MADCOWVT]

Well dammit Nick. Now I am going to have to add this one to the fleet. Thanks for the review.

[@NickBurnsFPV]

lol. It seems we have to stay off the internet when our budget is "frozen" :)

[@damianomotta1809]

What a cool little guy

[@zuzmw]

“58 percent humidity” laughs in 85% and 90 degrees in Midwest. Great vid man

[@ckfpv]

Ordering mine today

[@NeoFrontierTechnologies]

Nice little drone. Tempts me to buy another one. But I feel like a child with all my toys already... I like it I like it I like it.

[@NickBurnsFPV]

Yes our toy collection 😄

[@ChainsawFPV]

I kinda want one of these to use my 1s batts in the summer.

[@MCsCreations]

Fantastic flying, Nick! Pretty crazy like quad! 😃 How does it compare to the TKS StarLord 1s version? That's what I thought the whole video! 😂 Great review as always! Stay safe there with your family! 🖖😊

[@NickBurnsFPV]

The starlord has more performance for sure. The larger prop and motor give it that advantage. The starlord also won't fly for 5 mins fun fast, or 10mins slow. The flight efficiency is the separator there.

[@allennickles3970]

Cool little flyer! Looks like a good little trainer to learn new tricks with! 2s would be awesome!😎

[@NickBurnsFPV]

Yep I am so strongly biased but to the 2s on the tiny guys. 1s is cheaper and likely more crashable but the performance on 2s is so good on 2inch light quads

[@allennickles3970]

@@NickBurnsFPV I agree 2s is the sweet spot & more toque

[@dronemaniacsdpreston8497]

Wow so tiny , 10mins flight is incredible 👍👍👍👍

[@Scaze74]

Love the micro ones. Flytime on one batteri is not a big issue with these smal ones then thy r that ceap. Nice rewiew.

[@kxdmotovlog6898]

Hi, I have a problem with the drone, but not all my LEDs work, only a small red one goes and only makes a beep! He has to make 4 beeps and he doesn't ... Please help me and tell me what it has or how I can reset it! I'm using a FlySky i6 and it's not even connected to the drone because I don't know how to connect it and I can't find a tutorial on google!

[@ryeyoo]

that's an insane flight on a 1s

[@AsgardStudios]

Great review Nick! I’m really enjoying Flywoo’s variety of new designs. I have their Explorer LR co-designed by Dave_C and I love it!

[@jackhiggins574]

great info. great review

[@Nicolae.Simion]

Hello brother, I just received the drone from you, well can you tell me how I can connect it to the Dji googles V2 glasses?

[@jebrc]

That has to be the coolest micro I've ever seen I need one lol

[@KOrnhOliO1]

Or, just take any whoop you have and swap it to this frame, or a similar one! There you have it! Me, I'll be taking my Mobula7 and swapping it out to a frame very similar to this that I already own. Fly what ya got! ... That's my motto! Cuz I've got all sorts of parts and quads to make something this good, or much better! Because a 2s version of this WILL KICK ASS! 😎🤘... Or a Mobula6 on this frame will give you a 1s / 25000kv RIPPER! 🤪

[@kurtzFPV]

@@KOrnhOliO1 I did this with my mobula 7 close to a year ago now, but in a r3d ductless frame. I flew it more than any other quad till I got my crux3 since I could just step out in the yard to do it. This frame looks better, but I can't see the quad when I'm flying anyway lol. But I agree, if I hadn't already done it this frame looks like a great option, and I prefer 2s outside.

[@KOrnhOliO1]

@@kurtzFPV did you use the R3D Ion frame? That's the one I'm gonna use. I already have it, so it's a simple swap out.

[@kurtzFPV]

@@KOrnhOliO1 I did. And I'm happy with the performance. Careful on the motor screws. I had one a bit too tight and because of the tpu base, it wouldn't turn. Didn't hurt anything though-I just had to loosen it slightly. I also have rpm filtering and bi-directional dshot enabled. Fun little flyer for sure.

[@seanconnolly2179]

This looks like a good one!!

[@phillyspecial1393]

It looks like a little monster too!

[@Nspecthergadget2010]

Yes 2” 2s I would think about getting one even more.

[@ChrisParayno]

There's the emax tinyhawk 2 race😆😆

[@davesfpvfiftyfiveco.7716]

it looks fun to fly

[@joelfarrelly725]

I NEEEEED this🤩

[@Soulsurferfpv]

Looks like a fun little 1s, but now there are a few good choices for 1s prebuilt toothpick style quads if you don't want to build one yourself. Its also nice if the companies offer a 2s version so there are choices. I hope your hint gets them motivated to offer it in a 2s also.

[@NickBurnsFPV]

I hope so as well.

[@da33ie]

I built a 2s one from a mobula7...and its fantasticly insane! Plus it flys with a 1s rather well too!

[@genesisfpv]

The - 130 is an "unknown " checkbox in the osd.. The camera was wiggling on me so o swapped out the camera with a runcam 2 nano but may swap it smaller. Added 5G using a 3d printed canopie, but ill make it lighter. Else, its an awesome quad! Happy to see 1s micro be able to be so acrobatic! Although its so light as you expect so you can't toss it lol

[@StuckOnAFireHydrant]

Nice little 1s! Man it's a good thing I just got a raise cause man am I about to be spending a lot on fpv I predict! (Also don't worry I didn't mind the ff flights we were pre warned for it lol) Also nick... I see you practicing some more freestyle moves during those crashes 👀, I look forward to seeing how you progress!

[@NickBurnsFPV]

yes, I have been working on adding some items to the typical flight. Its a challenge flying different quads regularly and having to be very proficient in full flight reviews. Especially challenging in longer flights, do something once well, sure, then crash out with a silly mistake :)

[@raymondgignac1]

I just ordered one and i was wondering if i put prop gruad and change the camera angle will it be flayable inside ? Thanks for the nice detailed review !

[@NickBurnsFPV]

Flyable? Possibly depends on how it changes and the resulting weight

[@judahbeatz5640]

I'm new to the FPV hobby and I don't know anything about binding or connecting the goggles. I prefer analog, what goggles and radio should I buy to connect most of the fpv quad also what receiver should I purchase ( please recommend on a budget ) please help me with your suggestion. Reply and suggestion from experts like you helps me to grow in knowledge every day Nice review BTW

[@NickBurnsFPV]

I like the small game pad style of radio, its the jumper t-lite with the 4 in 1 module. This will bind to most if not all our fpv quads. Goggles tend to be more expensive part of the hobby, most on a budget will go with box style googles. The cobra x are likely the best in the group but there are many many others, a much less expensive box goggle is the eachine DM800.

[@judahbeatz5640]

@@NickBurnsFPV Thanks for your suggestion as I said suggestion from experts like you helps me to grow in FPV THANKS A LOT NICK

[@NickBurnsFPV]

@@judahbeatz5640 Sure. I try to help as much as I can.

[@KernsJW]

Looks awesome, nice flight time and it is quiet. Little bit of prop wash, but not sure you can tune that out

[@NickBurnsFPV]

If anyone can Patrick can :)

[@lievenvv]

I wonder if the BEC would support a Split Lite cam? That could be really neat!

[@NickBurnsFPV]

Good question, not sure, I did notice the telemetry for the receiver would drop out late in the flights, I am wondering if that is a voltage supply issue.

[@shakeymikesadventures6793]

Nice little micro,and flight times. I'm just not a fan of squished x frames or how much the board is exposed. I might order a board when I am more into express elr.

[@sunsetpark_fpv]

So sad that this is out of stock. :( I wonder if they'll do another production run.... (In the meantime I've been eyeing the parts to build it myself....) Awesome vid Nick! You made this little guy look like so much fun!!

[@barneyfromblueshift]

Hey there - if you haven't seen, they've just released a V2

[@sunsetpark_fpv]

@@barneyfromblueshift Ooohhhh thanks for letting me know! 🥰

[@joelgarcia828]

Great video

[@manwithgutz]

hi nick, i remove elrs went back to spi d8 built in ..having difficulty in binding with both my transmitter... i did attached ufl antenna the smaller one

[@NickBurnsFPV]

On the elrs we are using a full uart, meaning...rx1 and tx1, cross wired rx to tx and tx to rx? We can also use rx2 and tx2, or rx3 and tx3, they just need to be the same number.

[@chrisbee5481]

I just built nearly the same. Took the moblite7 components to a 2 inch racerx twiglet mini frame. Flies great. But unfortunatly the 0802 motors couldnt handle 2 inch biblade props. Too much vibration and jello. Seems 1.6 inch is the limit for 0802 motors. Since I want more punch, i ordered 1102 13500kv motors. Mine is 21g dry with 0802. It will then be converted to 2.5 inch biblade props and frame, coming in at 28 gram. Love how you always wish for a 2s version in your 1s reviews. I feel the same, once you get to love the power punch of 2s. But 1s should be to fly anywere and silent.

[@NickBurnsFPV]

Yes 1102 can handle a 2inch prop so much better. Yes the little little ones are more fly anywhere 💯

[@dubzsquaredfpv7171]

Awesome review as usual! Will these motors work on a typical whoop? Somebody told me the mounting pattern is different.

[@NickBurnsFPV]

I am not with it at the moment, but I think they are the standard 3 hole mounting we have with our whoops.

[@michaeljohnson6473]

Nick, I haven’t watched one of your video’s in about two months. I could hardly recognize ya! You lost a bunch of weight. Congrats!! You look great!!

[@NickBurnsFPV]

Thank you. yes, I have been working on decreasing :)

[@samavella8831]

Hi Nick, Just received mine yesterday the version 1.2 and not the RF version. Do you happen to have a the CLI for your tune? I’d be interested in trying it out. Thanks 🙏

[@NickBurnsFPV]

The tune is the stock tune, which is available on the flywoo support website if you need to move back to stock tune.

[@InfectedChild]

Has anybody the v1.2 with FrSky SPI D8 receiver and uses telemetry? I'm flying it with a Taranis X9D Plus and the voltage value via telemetry (VFAS) are not correct. I calibrated the voltage in Betaflight and the battery value from OSD is correct. But all voltage telemetry sensors are showing voltages that makes so sense. VFAS for example starts with about ~0,3V discrepancy to the OSD value and goes down very fast while I'm flying, until it reaches exactly 3,43V (while the OSD shows me 3,75V or so) and stays there until I land the quad. What could be the cause for that?

[@fuizipra]

this is so cool

[@chasedierkes6809]

@nick burns I saw the hq tri props u have on are not sitting all the way on the shaft if you drilled 1mm hole all the way thru and let prop all the way down, better handling

[@NickBurnsFPV]

Yep. I do my best not to make modifications in reviews, unless its a build. So many miss various details in videos, declared modifications seem to create as much confusion as help.

[@crashmode3401]

If you had to choose between this and the moblite7 which would you pick? Also do I need a special transmitter module for the express lrx receiver?

[@NickBurnsFPV]

For expresslrs we do need an expresslrs tx module for our radio. For outside flying I would likely choose this, for inside the moblite7. The moblite7 doesn't fly as well as this outside with the typical wind I have in my area.

[@bushcrafter6416]

Glad I found this channel, Gonna get this little ripper in CRSF based on your review, Don't have ELRS, want it, Maybe a Beta lite3 to start, Do you recommend the lite 3?

[@NickBurnsFPV]

The lite 3 works fine but for slightly more the radiomaster zorro is far superior imho

[@sixtofive]

At least with a ufl connector for the vtx on this aio board switch out the vtx antenna is an easy task. Do you think there might be enough clearance to spin 48 mm props for a little more punch?

[@NickBurnsFPV]

We might be able to, I am not finding my 48mm triblades. Looks like it will be very close at the usb port. I measured with calipers. We only have 4mm between prop and canopy at the usb port, we can get another 1.5mm if we trim the canopy portion somehow.

[@sixtofive]

@@NickBurnsFPV Thank you for checking.

[@battano]

I have had similar video flashing effects like that on multiple elrs builds and after two months of troubleshooting on elrs discord and with happymodel the issue turned out to be a bad TX. No link issues but TX was blowing out video. DVR setup away from TX proved this. Replacement TX board has been in the mail for over a month but went out of pocket and purchased another ES24TX and have had zero video issues with it although the fan still never turns on. I've had fun with my Inav Firefly Hex once the bad GPS was dealt with also those HQ 4x40mm props blow apart on 4s but otherwise a fun rig so I did order a elrs capable Nano three days ago when it was listed.

[@NickBurnsFPV]

Did you see it on all the ELRS quads with the ES24TX?

[@NickBurnsFPV]

I am going to order another to be sure its not my tx. Thank you for that information.

[@battano]

@@NickBurnsFPV Yeah Two using Ep2 rx one using PP rx and the new 2.4ghz betafpv aio with integrated elrs rx. Once I placed the dvr away from my transmitter/TX the flashing interference went away. After swapping the TX the issue went away all together however this is now the third ES24TX board for X-lite/Tango I've run and not a single time has the fan kicked on. Ive used the Happymodel factory flash as well as 1.0 and 1.01 configurator flash with same results fan never powers up. So I'm hoping this is not some kind of issue that will pop up again due to overheating or something. Man these last few months have been one issue after another for me. I cant tell you how many replacement parts I'm waiting on.

[@NickBurnsFPV]

@@battano Hmm. I don't have that one, I have been told the new ES24TX for x-lite is on its way. I need to go out and test again this weekend.

[@battano]

@@NickBurnsFPV Still waiting on a replacement AIO for the HX115LR I've had but not been able to fly since July. Still waiting on an ELRS TX but just ended up purchasing another one as I could not wait another month or two.; Purchased an Eachine Cvatar 2.5" 6s a few weeks ago on banggood which arrived today with a bad F722 AIO. Not to mention bad GPS on my Inav Firefly Hex and the Moblite7 that arrived crushed. I ordered a Firefly Nano baby 5 days ago and it still has not shipped. If its like the last firefly I'll have it in two months from now with a bad AIO or ELRS RX or who knows maybe this one wont even show up. No joke cant make up my amount of misfortune...

[@InsaneClownFpv]

I need one the aio bad!!

[@FastSloW-qt8xf]

Awesome quad. But I just broke my second camera on relatively mild crashes. There is nothing appearance wise wrong with the camera but as soon as I put another camera on its fine..

[@NickBurnsFPV]

I wonder if the camera is making contact with something behind it. Maybe cover the back of the camera with some foam tape to decrease the direct impact?

[@DougEfresh.]

So if I ordered the express elrs version, what do I need for my Jumper T lite to get it to bind. I know you have done a ton on express elrs but I guess I haven't learned much about it, probably because I hate change, not ever going to crossfire but this elrs is sounding like a possible for me. What is the best video to learn more about elrs that's not too technical?

[@NickBurnsFPV]

The jumper t-lite has a elrs module from happmodule. We do have to take the radio a part to fit the wiring for the backpack, its a no solder connection. The backpack then is the attachment point for the ELRS module. From there we need to flash the tx module I cover that here kzbin.info/www/bejne/Z6iZpp5pn7qhgNU

[@rmirov]

I like that it is only 1S, but that doesn't tell me if the "S" is Lipo or Lion. There are some appropriately sized small Lion cells I'd like to pair with a quad like this (14500 cell, 900mA) that are fine being taken down to 2.5-2.7V. Or at least they'll last longer than I need them to. But often the flight controllers brown out below ~3V. I see that this FC has a 5V BEC. Is that actually a boost converter (sometimes they aren't). Can you plug in a Lion cell and see how low a voltage it will operate with (just a long hover test would do it) ?

[@NickBurnsFPV]

On my channel is pretty much all lipo. In traditional fpv quads we only use lion for long range slow cruising flight. I have a video coming out testing the voltage basement.

[@scu-dub]

Great little micro👍 and with the mockingbird touch it will be even sweeter🤌 this is definitely a must get little ripper I would've like to see it run 2s but after the mockingbird I'm sure it will fly like 2s lol I seen a couple whoops get the mockingbird treatment and they flew like gems!!!! Longer flight times as well as superb handling and response another home run nick👍.....I think I like your tks rocket better though😁✌

[@NickBurnsFPV]

I too like the TKS rocket race better. This is more about just 1s, longer flight times and tiny. The rocket race has good efficiency and great performance?

[@scu-dub]

@@NickBurnsFPV after seeing yours nick that tks rocket is at the top of my list lol I had a horrible experience the other day I went flying my novice 4 that I had the vtx issues and thought I had it fixed I had used the weld glue and everything was fine I got about 110 meters out and completely lost video! And I was too far out for Los so I ended up losing my quad.....I'm so ticked off😔.....I couldn't even run back the vid to see were I went down because video cut off while I was in the air I searched for the sound of that loud buzzer but unfortunately it wasn't as loud in the field as it is in the house....so needless to say I can't even replace it because they don't sell just the quad you have to purchase the entire bundle in order to get the quad and I really don't wanna do that I don't have another 500 bucks ......so I'm bummed out😫

[@NickBurnsFPV]

@@scu-dub Sorry to hear we have a lost quad. If you don't mind me asking. What was the original vtx issue we used the welder on?

[@scu-dub]

@@NickBurnsFPV remember I had the ufl connector problem....the connector came off the vtx board and was still attached to the antenna they had it glued with now I'm finding out is "704" ???? Glue.....but it was never soldered so I tried the Welder glue and it worked good but I don't think it held up as the vtx got warm I went from perfect picture/signal to total drop out....I was freakin out nick lol I searched everywhere but no luck.....what sucks is I had just put new standoffs on it the ones they sent on it were black and not the ones advertised then I had ordered a set of arms so now I have all these novice 4 parts and no novice 😫 I actually liked that quad....I can't tell you though it's DEFINITELY NOT A LONG RANG QUAD like they say it is....

[@KOrnhOliO1]

@@scu-dub Keep looking bro! Do a grid search pattern, so you know for a fact you've covered every inch of an area. Then, check off that area and proceed to another... Keep going! Go way farther out from where you thought it dropped than you think it landed, because invariably, that's where you'll find it! Go back today and search, and search... Bring other people with you, if you can, to cover more area faster. Always put a physical buzzer on all quads and don't rely on those worthless motor buzzers! GO NOW! YOU CAN FIND IT! 😎🤘 ( Next time, don't buy Eachine! Sorry to say, but they use the lowest quality parts and that's why this loss happened.) Buy the Nazgul for only a few bucks more and get higher quality throughout! Never buy Eachine again and be much happier... I know, I bought Eachine when I started and pumped so much money into those quads to keep them going because of breakage, failures, burnouts, etc. They just fail more often because of the low quality parts used. FACT. That's why they are cheaper. 😟

[@sugarqfxxx]

Im a newbie, is there a ready to fly version? Or what are the stuff I need to get into it? I dont have anything, not even a Transmitter, fpv goggles, or anything.

[@NickBurnsFPV]

They don't have a kit version of this that I am aware of. We would need goggles, radio. Most enter the hobby with eachine ev800d or ev800dm goggles. The radio we can use various, I suggest using a radio from radiomaster, the tx16s is very popular. I use the jumper t-lite radio. There is much to learning, such as binding, betaflight configuration and battery maintenance.

[@simonhampton1304]

I'm just starting out in fpv and i would like to know what goggles i can use with this drone that are cheap just to get me started,could anyone recommend cheap fpv goggles for me to use here,i would like to choose this drone with 1000mW elrs.

[@jessicastrat9376]

This looks amazing! I really want to get one, but I know nothing about drones. Do I need to buy a separate transmitter and battery??

[@NickBurnsFPV]

If you don't have a transmitter and battery we do need those. As well as goggles and a charger.

[@robertmontgomery6572]

Don't know what the range of this little thing is , but it would be cool if it had some Worthy long range . Put a aftermarket 4K camera in it & air brush it with the pattern & color of a iridescent hummingbird to disguise it , use it as a spy drone . Right now I own several drones , some are for heavy lifting , some are for sport & fun & now I'm looking for a drone that has very long range & I know there's ones out there with crazy range . The United States military has a very very small helicopter type drone they use for reconnaissance that has a battery life of a hour & a half & can fly at a range of 27 miles with a real time camera , but the thing cost a upwards of around $37,000 dollars & that's crazy . It even has a fly back home feature that lets it fly back home on its own super fast . Look it up it's out their .

[@NickBurnsFPV]

longer range requires more mw. micro vtx haven't topped 400mw yet, 1watt is commonly used for long range and those are large vtx. Otherwise we need to use hd video or specialized directional antenna on the goggles.

[@robertmontgomery6572]

@@NickBurnsFPV yup I know all of that , just would have been cool if that was long range .

[@manwithgutz]

Hi Nick, I have the flywoo ExpressRLS can you help how to bind with the Jumper T lite happymodel TX

[@NickBurnsFPV]

How do you have your model file setup on the radio. And what binding sequence are you using?

[@johnlheneghan1630]

Looks like it flys smooth, are you going to change the PIDS?

[@NickBurnsFPV]

I might if I can get some free time.

[@unacceptableminority7101]

As far as heat index goes I don't think it adds up for drones. Because they don't sweat. So just straight temperature effects it. Correct me if I'm wrong.

[@NickBurnsFPV]

This is true. But it sure effects me 😅

[@kaelstokes5804]

Just received my DJI System an the baby nano with the caddx vista can u help me on how to put the vista unit in?

[@NickBurnsFPV]

Lets start with what is available. Here are two videos to view and take in the information. kzbin.info/www/bejne/kJKahXype9WVmpI kzbin.info/www/bejne/p2jZl51oYsyog9E

[@JonR35]

I can only get like 3 or 4 min on a emax 450. Any reason why

[@NickBurnsFPV]

If the battery has been used and flown to very low voltage that could be it or kept for long periods of time at full voltage. Or physical damage will all change the battery health and its ability to provide flight time and performance

[@DigitalArtisan77]

Thats mind blowing. There's surely no legality issues there 🤣. They'll think they got hit by a bumblebee, you'd have turtle moded shot off and no harm done. That's it we need drone carrier motherships now lol.

[@brycehunt3477]

Hey Nick what goggles did you say you use because i was looking for some and Idk what ones to get.

[@NickBurnsFPV]

I use the orqa goggles the v1 with rapidfire module and two axii antenna

[@Gunmonkey5]

Question does it come with the thing to view the footage live? I’m new to drones

[@jgallone]

No, you need to buy the goggles separately.

[@MichaelDFPV]

I have been flying whoops (new to FPV) and have been wanting to get an open prop. I think this is the one. Thank you for sharing this. When I decide to order one, I will make sure to use an affiliate link when I do. :)

[@NickBurnsFPV]

Thank you. Sure helps the channel continue to bring new items

[@MichaelDFPV]

@@NickBurnsFPV @Nick Burns Haven't ordered yet but already planning upgrades to try out. 1. Tri, or Quad blade props. 2. Solid pinPH 2.0 3. Tape the wires 4. Larger frame and 2 inch props Might have to buy 2 🤔 LOL

[@NickBurnsFPV]

@@MichaelDFPV Might want to add 1102 18000kv motors :) Or stay with 40mm on 0802.