Boots From 1930's RESTORED and REBUILT with NEW-OLD Stock

SHOP LIKE THIS BOOT: nicksboots.com/renegade-pull-...
Nicks Boots: nicksboots.com/
Disclaimer: This boot is not available for purchase and is for entertainment purposes only. This is a one off product and will not be made available for the foreseeable future.
Shop Our Work Boots: nicksboots.com/shop/work-boots/
Experience the transformation as we tear apart and rebuild a cherished pair of Doc Martens by treating them to the Nicks treatment. Witness a meticulous process where we deconstruct the Dr. Martens, unveiling the factory-installed synthetic and substandard materials. In our quest for excellence, we enhance every aspect by replacing these components with premium leather and rubber, elevating the overall quality to unparalleled heights.
While most boots are meant to be thrown away after a few months, Nicks are built to last. When your boots start to need some servicing, you can send them in to have them resoled or completely rebuilt! Nicks Handmade Boots are serviceable and last years longer than a mass-produced boot. Since 1964, Nicks has been making the highest quality boots on the market, right here in Spokane Washington. If you're tired of your old work boots wearing out, upgrade to Nicks and enjoy the most comfortable boots on the market.
How to Clean Your Boots: www.youtube.com/watch?v=aaEcp...
FAQS: nicksboots.com/resources/faq/
Nicks Boots on Social Media:
/ nickshandma. .
/ nickshandmad. .
/ nicksboots1964
The equipment we use for our videos:
Camera: amzn.to/3sg4h3K
Main Light: amzn.to/3qP8Hyv
Tripod: amzn.to/3dEUrVb
Storage: amzn.to/2NBOVId
Software: amzn.to/2NrC3Vg
Links are either product links through the Nicks Boots website or are affiliate links.
#handmade #usa #nicksboots

[@Nordic_Sky]

Amazing how the boots look almost contemporary. I had no idea those fundamental designs went back that far. That really shows they have stood the test of time.

[@foolicooli]

There is just something special about watching a proper tradesman performing their skills. Boots turned out amazing

[@JinsKookieJams]

*Some are complaining that only the shaft is being used. That's because the shaft is in not too bad of shape and good enough to keep 😅 It's totally ok to rebuild boots. They do it all the time. People super commonly do it for sentimental reasons. It's valid 😊 I think the contrast with the old and new is great! It adds more life to the boots to be used much more! I did read the description and I know it was for entertainment purposes only. However, the owner may or may not use them. But still it does add life to them. They did an awesome job!*

[@kevinpecunia2432]

Great video, no talking, all business. 👍👍👍

[@user-kr3zb2re1c]

New life to an old boot. Nice one. Personally, I would have preferred that the final stitches on the sole were channelled. I'm hard on workboots and would have worn down those stitches in no time if they were not channelled.

[@bryanduchane2371]

That's one thing that troubles me about the current boot construction.... It's such a small detail, but it really helps protect the stitches!

[@Sholon]

Agreed. It shouldn’t be that complicated imo, but those stitches are worn out very rapidly in the workplace.

[@hyattbusbey3563]

I was a little worried these would get big Vibram V100 soles. The Cat's Paw just fits the old aesthetic so well.

[@bddmhopp5]

As a 35 year finish carpenter, this is impressive

[@josedurbano2730]

Looks amazing, old and New at same time

[@simonbuechel8424]

Wau ! Mega schön geworden 😍😍👍Respekt

[@USDAselect]

Certainly rare seeing Cat's Paw. Dr Sole captured their market nowadays.

[@USDAselect]

There's more steel in a Nick's boot than in a German Leopard 2A6 tank.

[@mitchlol5710]

There's no steel in nicks boots other than nails and safety toe if you have them though.....

[@corneliuscrewe677]

@@mitchlol5710Pretty sure that is what he meant....

[@bryanduchane2371]

​@@mitchlol5710Other than a steel shank, what other steel has ever been used in the making work boots?? Smart ass!!

[@mitchlol5710]

@@bryanduchane2371 nails, screws, eyelets, speed hooks, spikes.....DUMBASS

[@monicagrant6092]

Beautiful!

[@retiredafce3373]

Wow they are beautiful.

[@Blaque_Frost]

Sends me straight into my grandfather's ax paradox. But beautiful work on both ends of the spectrum.

[@rickc4317]

Wow, magnificent!

[@carlstirling103]

Dayum i really need to try nicks boats!!!!

[@miketroutman7365]

Interesting and beautiful!

[@gsalinas1229]

What sucks is where I live, it is down to 3 cobbler shops. majority of the boot companies just make them disposable and not repairable. I have a pair of thorogood boots and one shop was able to repair them but had to wait a week as they still have business but still a reasonable time if you want them done right.

[@rpc717]

I can't believe those boots were just nailed together and that lasted.

[@mal4ik_bobby842]

Вот раньше обувь шили, еле отодрал подошву)

[@zirlianamatthew4598]

❤🎉Good Boots 🥾

[@motaman8074]

Sweet

[@pomnichowski]

Spoko! Walnij Bracie! 🖐️

[@baberoot1998]

Great looking boots...no doubt. Well made. However...the only part that is part of the old boots...is the shaft. Everything else is brand new.

[@NwWrenchin]

Howdy from selah !

[@nicksboots]

Howdy!

[@malcolmsmith333]

If you ever wanna open up a pacific-asia shop in new zealand im keen learn a new craft. We have some good leather tanneries local for horse, cow, and sheep leather. Our market down here were exposed more to RM williams chelseas and the good old wellington, so it is essentially and untapped PNW boot market, but these would be appealing to alot of men down here not just for the utility and durability but also the look. 😂 😆 🤣

[@mingus6929]

👍double soul dobro👍

[@mrOZO_101]

Mantap 👍👍👍

[@TheDoug2103]

i love watching these, i dontt get an asmr response, its just great to watch a true craftsman. but why go thru all of this when you can just buy new boots. i buy fairly expensive boots and i would just replace them.

[@corneliuscrewe677]

Part of it is the savings in expense, a rebuild being roughly half the cost of new, the other part is that upper is already broken in.

[@TheDoug2103]

@@corneliuscrewe677 i guess, i would just get new boots, then again, the most expensive boots i would buy wouldnt be over 500.00.

[@corneliuscrewe677]

@@TheDoug2103 I don’t know, man, that break in period is a bit of a b-word. You might just change your mind😆😆

[@TheDoug2103]

@@corneliuscrewe677 im sure, ive worn redwings my entire life and in almost 50 years i went thru 3 pair. in the marines the first thing we did with our new boots was to do calesthetics in a hot shower wearing them, then the next day we went running in them all day, they broke in pretty quick.

[@MemphisCorollaS]

⁠@@TheDoug2103I’ve heard that it’s been common in some branches to “liberate” used oil from the motor pool to soak new boots before doing this. I never served but have veteran friends who told me that. I can imagine it being true tho just for a bit of break in relief before all that running in new boots.

[@bryanduchane2371]

Never see them removing the last out of the boot in any video I've ever watched. Would really like to see how that's done..

[@nicksboots]

18:09

[@johnvelas70]

How do you know the age? From what I hear about nail down boots (my friends own Viberg), if you start offering it, I'd be interested.

[@chadspray104]

What size are they? Are they spoken for already?

[@Nordic_Sky]

I'm sure they were sent in by a customer for rebuild. They probably aren't for sale.

[@Bearded360]

Would look sweet with rough out.

[@plaid13]

Now dig up the original owner and see if they still fit.

[@seelye1221]

that when boots was made to last forever.

[@dillydanny-o8807]

How do the nails not go through to the inside of the shoe or at least be felt from the inside? They seem longer than the width of the leather layers.

[@michaelskinner896]

The point typically deforms and flattens against the shoe stand before the insole is installed.

[@dillydanny-o8807]

@@michaelskinner896 oh interesting! I guess it would make sense they’re special nails for shoes.

[@CGS1]

👍🏻

[@billjames8036]

Is it just me or is it weird not having some sole cover that middle section?

[@user-hh5fn4mx7d]

😎👍👍👍👍👍

[@JNOSNOW]

Go Vikings baby

[@jamesdaniel2363]

No words…..

[@dantheman9185]

Seriously, nothing beats a handmade boot. Even if they are 100 years old, your always going to spend a lot of time removing the sole and the heel.

[@danielbornaz]

There is still no way for me to understand _why on earth_ those heels should look like women's boots. The original shape was really good.

[@robertboyer5498]

Do we know what brand boots these are? They look like PNW boots but not stitch down. Maybe they built them like that in the 30’s? 🤷🏽‍♂️

[@nicksboots]

We couldn't find any specific marking anywhere on the boot, even during teardown

[@henrymach]

Oh great you turned it into a woman's boot

[@rickharris4579]

Why is there a girl at a boot making company that is always wearing a sweater & a dress to work?

[@mymusic-cq2vi]

Not impressed,so you just made a replica of a pair of 1930 boot anyone with the same machinery can do the same thing

[@munrocoutu6854]

Is your name Shania Twain or sumn? “That don’t impress me much” you try doin it yourself even with the machinery you’re gonna struggle

[@valdocesarsiqueira8716]

Rio de Janeiro- Brasil.