"How can you make a loyalist version of guys who skin people?" Skin for the emperor Brothers, skin for the emperor.
@funbro992 жыл бұрын
Killing deserve skinning and torture of a death Stealing is skinning limb that will be cut off. *que diffrent grade of things.* lil bit of medieval style laws
@kylenguyen73712 жыл бұрын
"Oh, this skin on my pauldron? I took it from the face of a governor who attempted to betray the Emperor; he under-reported his taxable assets in a bid to avoid paying planetary tithes." - a Librarian of the VIII Legion during the Great Crusade.
@Prophetofthe8thLegion6 ай бұрын
Marines Malevolent Intensify.
@lordcommanderjhogun65102 жыл бұрын
It's like the Night Lords transfer sheet was made by an actual Night Lord
@sinenomine7115 Жыл бұрын
What, from actual skin?
@anightlord1852 Жыл бұрын
@@sinenomine7115 of course, what else would it be?
@calumdeighton2 жыл бұрын
Night Lords player here. Going to benefit greatly from these videos of yours Macca. Thank you very much for all your hard work. Carpe Noctem.
@richardvaldes39592 жыл бұрын
Ave callum!
@calumdeighton2 жыл бұрын
@@richardvaldes3959 In Midnight clad, brother.
@PixelReaper2 жыл бұрын
As a NL player, your best friend for upgrading the box set is finding someone with a 3D printer and grabbing a bunch of files with different skull and winged heads. For Nostraman Chainblades use the CSM Chainswords, Libre Demonica do some great Chainglaives and any CSM Chainaxes work for Headsman's Axes. To spice up the standard models, grab some 1mm jewelry chain and body parts and skulls to adorn the blank space on the models
@magicianman5342 жыл бұрын
I distinctly remember a BL short story dealing with the Raven Guard integrateing pieces of other legions to keep their numbers up where Corax had a Night Lord officer on his command staff. I always wanted to know that guy's story. Best part of that story though was the RG using an Imperial Fist ship as bait for ambushes. After the battle the Fist captain was like "Man, this falling back thing is kind of fun. Don't tell dad".
@sinenomine7115 Жыл бұрын
Maybe that NL became one of the original Carcharodons?
@theylivewesleep.513911 ай бұрын
@@sinenomine7115what would become the charcharadons had already separated from the Ravenguard by that point.
@maddogmadden232 жыл бұрын
I'm starting Night Lords with this box. You kinda read my mind with all of what you said! I also picked up some third party bits.. including some beaky helmets with flayed skin over top.
@Azurios2 жыл бұрын
May I ask what bits you ordered?
@xDetroitMetalx2 жыл бұрын
Also here to ask what bits you ordered. I found a few STL to print but that's it.
@maddogmadden232 жыл бұрын
I went onto Shapeways and found some really neat heads. They have a bunch on there with all different marks of helmets in the Night Lords theme. I got the variety pack. I also went onto Pop goes the Monkey and bought the "Rotosword carmine" for some two handed chainswords. For some larger size bodies I also got a few sets from Tortuga Minis of the Mk2 to Mk5 running sets. I think that's it! But lots on Shapeways, Pop Goes the Monkey, and Helforged miniatures has some nice stuff also.
@tylerghersinich5762 жыл бұрын
Also for those how want to get chain cleavers. You can make your own. For example for my MKIII I cut the thunder hammer and the chainsaw into different bits and glued the base and head together
@chrislevitt49292 жыл бұрын
Thanks
@tylerghersinich5762 жыл бұрын
@@chrislevitt4929 hopefully it help I am not the best at explaining things
@jonathanmarose96852 жыл бұрын
Solid video and a great job. For the preator with the sword, if you want to go with a headsman axe, the master of executions from the CSM line has a great axe, along with some other bits that can be used to spike up your nightlords
@TheOuterCircle2 жыл бұрын
Problem is that the axe on that model is for the wrong hand, just making it harder to use.
@tylerghersinich5762 жыл бұрын
For my night Lords 9th company I hand painted a squad the traditional tactical squad marking and on top of it I painted a coffin with a white scythe in the middle. It was to try and merge the terrain culture and Nostramo culture together. Plus I gave them a lot of different marking in different areas. It was meant to show they are trying to adopt the new culture. I also paint on the should company number and the claw 1 so mind is 9th company (crimson son) 1st claw
@codeofzero12 жыл бұрын
I’m playing loyalist nightlords in a group campaign I’m in because we needed one more loyalist to make it even
@celticfox2 жыл бұрын
I like to use the Kroot Carnivore bits on my Night Lords, lots of skinning knives and hooks, meat on chains, etc
@timothymartin55382 жыл бұрын
I intend to buy 40k raptors for HH, but I'm gonna take the heads for the regular troops. Also, for converting the terminators I've been grabbing as many chaos knight vultures as I can, effectively gonna give all the termies carrion familiars.
@AubLambe Жыл бұрын
Been following the suggestions for the VIII and I'm rounding the 75% done mark for the AoD box. Very happy with how the legion is turning out. Thanks for the videos
@knightsolaire37812 жыл бұрын
Rise, my Night Lords.
@caseyrogers75382 жыл бұрын
I think the night haunt range would be good. Those long thin swords are really sinister looking and all those flappy cloaks could be used as flayed skin bits. Also maybe the chaos raptors for bits on jump pack assault marines?
@thewizardmf17510 ай бұрын
Love your content man ❤
@Ungantor2 жыл бұрын
Good guy Night Lords put the skin back on afterwards!
@Tangtang6312 жыл бұрын
These are a really useful video series, thanks Macca. Ave Dominus Nox
@landkomtur64162 жыл бұрын
Yup. Torn between Nightlords and Sons of Horus. Got a thumbs up immediately.
@chrislevitt49292 жыл бұрын
I’ve been waiting for this one!!!
@sackofpeas24702 жыл бұрын
Is there a potential error in the book when it comes to allies with the Night Lords? I noticed that if your primary force is Death Guard, then NL are Sworn Brothers, but the reverse is only Fellow Warriors. As far as I can tell, this is the only case where one side is Sworn while the other isn't.
@PB-re1mm2 жыл бұрын
"Just play them a little bit friendlier?" My sides
@reubenmarriott34142 жыл бұрын
Only thing I'd say about the transfer sheet is that nightlords are very much all over the place with design and symbols, so really I guess that's the aim with the sheet 😂 just my two cents
@warhounds2 жыл бұрын
as a Night Lords fan one kit to make your kit more evil is to buy the skull kit and put them everywhere
@walt_man2 жыл бұрын
Oof... two transfer sheets and the start collecting... is $275... and you don't even have any Marines yet. Damn GW is vicious.
@RyzinUpLoL2 жыл бұрын
Do you have any suggestions on what jumppacks to use with mk VI armour? Im looking to build a few mk VI assault squads out of this box.
@Balevolt2 жыл бұрын
Filed down raptor jump packs? Could also get sanguinary guard jump packs since that's the normal mk VI jump pack.
@diarrheadan36012 жыл бұрын
Dark Fury jump packs or old school raptor jump packs. Probably best to find 3rd party ones in those styles. The MK4 from the sanguinary guard might work also.
@Black_Blow_Fly2 жыл бұрын
There’s a great kitbash using Bic pens.
@RyzinUpLoL2 жыл бұрын
@@Balevolt I found a non chaos version of those to print, thanks for the tip :)
@samsolopeeps2 жыл бұрын
Chaos rhino sprue has lots of spikes with skulls
@joshuaginn79210 ай бұрын
As someone with armour autism…. Anyone care if I used new Chaos Terminators instead of the 30K options? The size looks better IMO.
@theezekarion1642 жыл бұрын
Already got nightlords and Dark angels so I'm gonna start iron hands who I've already started on
@orionparish98582 жыл бұрын
As someone who has put together the new S2D box, I'm just wondering what I'd need to do since the models in that box are all Easy to Build. Never tried fitting that kind with the normal models.
@Balevolt2 жыл бұрын
Try to get old Warhammer Zombie bits they work pretty to terror up your squads. Also, raptor chainswords (I hate saying this because I have yet to buy them) look just like the chainblades the terminator have ( with minor filing)
@gatsu33512 жыл бұрын
Best legon time
@thra-x18552 жыл бұрын
i might go in on some contekar just for all the little gory details that i could recast from them... but it's a big 'might'.
@theezekarion1642 жыл бұрын
there is a pdf explaining the nl decal sheet
@iangagne15202 жыл бұрын
Out of complete curiosity, what are the loadout and specs for legion scout squads ? Cheers
@Grubnar2 жыл бұрын
I am guessing you mean Legion Reconnaissance Squad? Or do you specifically mean one that has exchanged their power armour for Recon armour? Because the starting loudout is the same as every other marine ... but you have the option to change them into pretty much 40k Scouts.
@iangagne15202 жыл бұрын
@@Grubnar yeah I was looking for what 30k scouts would look like and what weapon options they'd have.
@itlivesin2 жыл бұрын
Hows preferred enemy going?
@Balevolt2 жыл бұрын
Hey now don't shame my "friendly" traitor skinning loyalist Night Lords.
@nightingale46322 жыл бұрын
Aren't charcharadons rumoured to be loyalist night lords?
@Black_Blow_Fly2 жыл бұрын
Nights are OP AF 🐡
@manofthewest53952 жыл бұрын
Lol, no.
@coureurdesbois6754 Жыл бұрын
Loyalist night lords = Charcharadons?
@Cynidecia2 жыл бұрын
Basically 500 for all that Lol no. I could buy a printer and make the equivalent for less.
@tylerghersinich5762 жыл бұрын
Best choice I have been using it to print MKII
@theredrighthandproductions2 жыл бұрын
Very that. I'm currently printing a Night Lords biker gang
@tylerghersinich5762 жыл бұрын
@@theredrighthandproductions that really cool mate I been trying to print torso that meets my standards not going well hahahaha