Burr! that nitro really makes your stick finger cold in wintertime! Flew a "Q-Tee" with a stock Cox .049 for years up in Michigan. Bought it at the swap meet during Toledo. Came with a two servo "brick" and a two channel EK Ligitrol transmitter. It flew so well people would offer to buy it from me after seeing it fly. One day I finally gave in. 😮
@codyblenden369 Жыл бұрын
I have this exact plane, I got it when this model first came out. But when they did, the 3 motors came with plastic gears and they always broke... glad to see they've upgraded them with brass gears!
@NightFlyyer Жыл бұрын
Right on. Thanks and happy flying.
@Del350K411 ай бұрын
Thank you for taking the extra trouble to record, edit and post this, instead of just doing it. I like your removable Cox mount, and was delighted to hear it running, though I recognise that the sound only seems pleasant to those of us who have formed an association with this sound and fun! That dead spot on the stock radio is appalling.
@NightFlyyer11 ай бұрын
Thanks so kindly and glad you like it.
@phononut Жыл бұрын
The sound of that engine sure brings back some great memories!👍
@NightFlyyer Жыл бұрын
I am happy to hear that. Thanks so kindly.
@jgme627 Жыл бұрын
Hi Dave, what a beautiful Cox 020, still runs great. I miss a lot all my Cox engines running, thanks for the video and specially video filming crew, Mrs Herbert.
@NightFlyyer Жыл бұрын
Thanks very kindly. Glad y9ou enjoyed it and thanks to the shout out to my wife. I appreciate you.
@Prototheria4 ай бұрын
This reminds me of converting old 24" span Guillow's rubber band FF kits into 0.020 powered UC planes and flying them around in the hangar between lessons back in the '90's. I remember in particular the C170 flying very well and pretty close to scale.
@NightFlyyer3 ай бұрын
Right on. A great story. Thanks.
@spencerleonard2617 Жыл бұрын
Thanks for the awesome video! I may have to build one of these with the old cox engine I have sitting around
@zuzanajendralova80873 ай бұрын
Wow, that thing goes like stink! I have to build something for my pee wee's. Love it thanks for sharing
@Winter_Sportster8 ай бұрын
Great video, and SO good to see these little Castor Slingers live again! In the 1980's, the Cox Centurions and Sportavias RULED in our little group of flyers, They were only rivaled in the .049 size by the Cox/Sanwa "Q-Tee" parasols, which often flew using an engine rotated from one of the Centurions. Sunday afternoons at our local airport saw us flying from a dead-end ramp, much to the entertainment of the local Airport Curmudgeons, who often yelled tips and advice from their benches next to the office. As the Centurions age away "the shine on the apple" they were often subject to assorted experiments, and I actually towed one into the air using a thread running from the Robart bomb release on my Sig Kadet. I'd hit the release, and the little foamer would glide down from altitduee, trialing its tow thread. Great memories...and great hearing the sound from these little monsters! Thank You, Kim
@NightFlyyer8 ай бұрын
That is a great story and thanks for sharing it. I've many videos on Cox engines/planes/Ukies on my channel. This one of my Flying Shop rags may entertain you as well. Thanks and Happy Holidays. kzbin.info/www/bejne/h2iwqHmMfaiFprs
@robertcovell2787 Жыл бұрын
You'd fit right in at our club ... we're all crazy too! 😋
@NightFlyyer Жыл бұрын
Thank you Robert!
@fpvoslo Жыл бұрын
🤓 Fun little flyer. UC next? Thanks for sharing Yf.....
@NightFlyyer Жыл бұрын
Maybe. I have several UKIE videos on my channel already. Thanks so kindly. I would bet if you liked this, you will like to see my latest video of my 63 year old Cox PT 19 U Control recent flight. kzbin.info/www/bejne/eIaTq2qamdymoruJkie
@Tony-ow3if Жыл бұрын
Absolutely Brilliant !!!
@NightFlyyer Жыл бұрын
Thanks so kindly!
@tomfuller7401 Жыл бұрын
Dave, I still have a Carl Goldberg Cessna 1/2 A Skylane that was one of my 1st R/C trainers with a Cox .049 on it, set up with just rudder only. I was going to add elevator but I never did. It was a lot of fun to fly, and you couldn't beat the little bit of fuel it burned. I still have a few cox engines to.
@NightFlyyer Жыл бұрын
Wow. I had one of those as well. Great plane, but I had an elevator on mine. Thanks and stay well.
@davenagel5129 Жыл бұрын
I have always enjoyed your talent and experience.Keep on keeping on!
@NightFlyyer Жыл бұрын
I'm trying for sure. Thanks so kindly, Dave. I appreciate you.
@sinformant Жыл бұрын
I hope you are doing well Dave and hope the treatments are working!
@NightFlyyer Жыл бұрын
So far so good. I just had my 18th treatment this morning. Thanks so kindly. I appreciate you.
@sinformant Жыл бұрын
@@NightFlyyer im very happy to hear that!
@Dick_Shinn Жыл бұрын
27,000 RPM's nicely overpowered the drag of the big round cowl!!!!
@NightFlyyer Жыл бұрын
Actually the 020 only turns 21,000 RPM and the 010 turns 27,000. But with the extra balance weight, my engine mount "Cowl", and still using the same battery, I am very impressed for sure, as well. Thanks much, Dick.
@kahmed7328 Жыл бұрын
That was really cool! I love your ingenuity.
@NightFlyyer Жыл бұрын
Thanks very much, I appreciate you.
@JasonUberig Жыл бұрын
Nice job Dave. You should put a banana sticker on the wing for those high-g maneuvers :). LOL
@NightFlyyer Жыл бұрын
Haha. Right on! I did strap the wing though, so it is better.
@truenaturestormers2525 Жыл бұрын
So cool.
@davidlewis620 Жыл бұрын
Hi Dave, you and I are the same age! I really enjoyed this video. It brought back so many fond memories of my flying days with Cox and .049 's !!! I will be looking forward to more of your videos! Thanks much Dave and Semper Fi.
@NightFlyyer Жыл бұрын
Hi David. Thanks so kindly. I appreciate you and Semper Fi!
@christopherpoucher483 Жыл бұрын
Excellent!!!!
@Sochibusi Жыл бұрын
Hi Dave, KZbin automatic captioning shows [music] while the Cox is running, and it is TOTALLY right. The RTF Cox Cessna Centurion was my forbidden dream back in the early '80s, but my dad thought the imported toy to be a bit too expensive, and that building model planes from scratch was more educational. Great video, greetings from Italy.
@NightFlyyer Жыл бұрын
Wow. That’s music to my ears. Lol Cool story. Thanks and be safe over there.
@TimDBarnett Жыл бұрын
Very nice Dave! Reminded me of my maiden of a 1100mm P51 on 4s battery. It was so fast I had severe anxiety that I might crash it. I only flew it about 4 times then I sold it because it was so scary to fly. I like 3D airplanes the best. Slow and Low! Thank you for the vid and your expertise over the years. The tiny gold pistons were cool! As always great piloting. About 12 years ago I modded a Horizon 3 channel UMX Champ with the motor, esc, mechanical, and electronic parts from my crashed UMX Beast. Took the dihedral out of the wings, added the ailerons and made it ‘Super Champ’! It flies better than my factory UMX super Cub.
@NightFlyyer Жыл бұрын
Right on. Thanks for the great story and thanks for commenting. I appreciate you.
@alanreynolds2125 Жыл бұрын
The only way to go Dave!!! you could put the prop on backwards! Hope your doing ok? kind regards Alan.
@NightFlyyer Жыл бұрын
Haha. Then I would have to put the starter spring on backwards, as well. So far so good. Had 18 treatments so far and only 21 to go. Thanks so kindly, Alan.
@amputeerc9298 Жыл бұрын
Man, this little thing rips!. I got started in the hobby around 2002 when nitro was still king, so naturally I prefer nitro over electric. I love seeing electric to nitro conversions. Cox engines were definitely before my time but a lot of the older guys would bring their cox powered planes out to the field on occasion for the nostalgia. Awesome video, hope to see more on this little guy.
@NightFlyyer Жыл бұрын
Thanks so kindly. Well if it ever gets warmer here, I hope to fly more, so please stay tuned. God bless.
@truenaturestormers2525 Жыл бұрын
@@NightFlyyer Just watched the video and love it.
@NightFlyyer Жыл бұрын
@@truenaturestormers2525 Thanks much.
@SoCal780 Жыл бұрын
Man, the speed difference between the two was like night & day, wow! $60 bucks a gallon? And I thought diesel was expensive! 😂 Great flying as always sir, Semper Fi.
@NightFlyyer Жыл бұрын
Thanks a lot Scott. Yep, it cranks and that was only on 15%. My next flights will be on 20% Nitro and will go even faster. The higher the Nitro, the higher the Price, that is for sure. Semper Fi and be safe. We are buried here.
@feltav57194 ай бұрын
I love how you addressed the whole "hovering power needed" that kids dont get... well... I was once a kid... flying plywood kits instead of balsa... using an o.s 40 la when people actually used 46ax 55ax on the same plane... and there I was... doing all the scale pattern flights and acrobatics... lots of dead stick landings since that lil engine was too far gone and good fuel was expensive... but then I made my own and used acetone as nitro... worked like a charm... cold or not it would goooo... Im glad we have people who think alike hahahah love ur vids. God bless you. I hope one day we can meet. I bet you got loads of stories to tell
@NightFlyyer4 ай бұрын
Right on. Wow, what a story! Great to hear. My stories are all on my channel from Military, models, and some weird stuff. Have you seen my video on my Nitro engine powered Shop rags? You might enjoy this. Thanks so kindly. kzbin.info/www/bejne/h2iwqHmMfaiFprs
@feltav57194 ай бұрын
@@NightFlyyer I did sir. You are one of my favorites. Back in Brazil we didnt have much... I started with rubber powered balsa kits haha. God bless you
@NightFlyyer4 ай бұрын
@@feltav5719 Balsa flies better!
@feltav57194 ай бұрын
@@NightFlyyer Always will... I even prefer them over composite. Its hard to find good balsa though
@NightFlyyer4 ай бұрын
@@feltav5719 Sig is my go to for balsa. Thanks.
@Romin.777 Жыл бұрын
Hey Dave, What a lot of snow you have over there, where i'm at no snow whatsoever this year. But a continent down in Morocco there's a whole lot. Take care and God bless. :))
@NightFlyyer Жыл бұрын
Yep and a big storm on the way now. Strange weather everywhere. Thanks and blessings to you as well.
@Raptor50aus Жыл бұрын
Hey Dave, thanks for the great memories flying with Cox engines :)
@NightFlyyer Жыл бұрын
Right on. Thanks for watching and commenting, and for being a long time subscriber. Stay well and safe.
@WORRO Жыл бұрын
Man what an increase in power! Thanks for the trip back in time. You're definitely an Ole Pro! Thumbs up video ~John
@NightFlyyer Жыл бұрын
Hi John and thanks so much. We cannot forget history, so I try to take us back now and then. I appreciate you.
@lyes-yy6qe Жыл бұрын
Uffff amazing , thanks for sharing!
@NightFlyyer Жыл бұрын
Thanks so kindly.
@andystoybox17239 ай бұрын
Super cool ! !!
@NightFlyyer9 ай бұрын
Thanks much.
@DonDegidio Жыл бұрын
Hi Dave, That .020 brought back memories. Never had one, but plenty of the .049's. My last .049 powered RC plane was the Honker by Dave Thornburg. That was a nimble little DIY plane. Even built his Doodler, which was decent at soaring. It was a kit sold by Southwest Sailplanes. Stayed up for half an hour one time. Those were the days before the auto accident that wrecked my back.
@NightFlyyer Жыл бұрын
Glad to hear that story, Don. Thanks so kindly and stay well.
@chrischannon2739 Жыл бұрын
Brilliant Dave, just how it should be, thank you.
@NightFlyyer Жыл бұрын
Thanks kindly, Chris!
@bobbarksofficial4335 Жыл бұрын
Interesting
@NightFlyyer Жыл бұрын
Thanks so much.
@bobbarksofficial4335 Жыл бұрын
@@NightFlyyer You're welcome! 💚
@bear3162000 Жыл бұрын
Great video Mr. Herbert! Been a while since we have seen a Cox motor on something, and it worked great. I was afraid those wings were going to fold up when you were pulling those G's lol!!
@NightFlyyer Жыл бұрын
Right on. Well, I was worried about that as well, with the extra weight, so I put Tape on the bottom side of the wing, to keep it from folding, and it worked....so far. LOL. Thanks much, Steve.
@rcrotorfreak Жыл бұрын
Hi night flyer. You should get a Radio Master Tx16s mk2 with 4-1 module it will fix the dead spot problem. :) Yes it will bind to that plane.
@NightFlyyer Жыл бұрын
I have one. I couldn’t get it to bind to it using the WLToys setup. If you have some better idea how to do this, let me know.
@rcrotorfreak Жыл бұрын
@@NightFlyyer Did you fallow other videos?
@NightFlyyer Жыл бұрын
@@rcrotorfreak but there is no protocol for this Park radio. I have the latest 4 in 1 software installed too. I have made vids about this Tx16s radio and use it mostly for my direct drive helis. I was sure it could bind to anything. I have spent hours. If you have a link to tell the protocol to this toy radio please post it here. But it’s no big deal. I can fly it fine as is. Thanks.
@rcrotorfreak Жыл бұрын
@@NightFlyyer Hi so I did some research. Wltoys f949 is the cessna just as you'rs. There a youtube video. Which he bind to a Flysky radio FS i6. So he disable 2a. So I would say tx16s or any other radio with 4-1 that use opentx or edge tx would set on flysky not flysky 2a. Either way if it just exact as you'rs the receiver board. Then it be using Flysky protocol. :) Title is Flysky Fs i6 transmitter bind with Wltoys f949 I would love to get this plane stick a cox 20 :) kzbin.info/www/bejne/sKSuoH1nnqx8d7s
@Granite Жыл бұрын
Awesome
@NightFlyyer Жыл бұрын
Thanks so much!
@Taintpainter22 ай бұрын
I just found one of these Cessna centurion just like you have pictured at a flea market still in the box with all the instructions and everything for 18.00 bucks. Just needed cleaned up. Took the engine apart and the piston and everything was in freakin great shape. I’m thinking about converting it to an electric or an actual nitro motor not sure yet. I will attach a pic.
@NightFlyyer2 ай бұрын
This electric plane did not have an engine. It has 3 motors that are electric. I converted it to the Cox engine. They didn't come with it. Not sure what you got, but good luck and happy flying.
@budparriott8054 Жыл бұрын
Yep, 3-motors gives it a lot of zip, just like when we put a rocket on your scimitar, but your nitro engine was the best...! Oorah
@NightFlyyer Жыл бұрын
Yes for sure. That rocket "Threw" my Simitar when it ignited for sure. Those were fun days, Bud. Thanks much.
@ib1rcnut9 ай бұрын
Thanks Dave. That reminds me of an Ace Rc pylon racer kit called GLH "goes like heak". It took an 049. It flew just like a bumblebee like yours. Lol Any chance you might be at The Joe Nall event in Woodruff SC in May?
@NightFlyyer9 ай бұрын
Sorry, I will not be making it. Medical and other reasons are keeping us home. Thanks.
@collinmccallum Жыл бұрын
very cool. Liked and subscribed!
@NightFlyyer Жыл бұрын
Thanks so kindly. I appreciate you.
@SomeGuyInSandy Жыл бұрын
Nice!
@NightFlyyer Жыл бұрын
Thanks very kindly. I appreciate you.
@timgawlick4100 Жыл бұрын
O what memories
@NightFlyyer Жыл бұрын
Glad to hear it Tim. Thanks so kindly.
@neilsaeroadventures1116 Жыл бұрын
Did your Cessna have a spar in the wing? I had one of these and so did a friend and the issue with both of them was the extremely flexible wing. It would fold under high speeds and the plane would plummet, and it would straighten back out when you slowed down! I was amazed to see yours not doing that despite the added weight, great video and I honestly wondered what one of these engines would do on a foamie!
@NightFlyyer Жыл бұрын
No spar. I put strapping tape on the bottom of the wing, so that would not happen and it worked. It's a fun little plane, but wish it was warmer so I could really fly it. Thanks so kindly.
@birdman316 Жыл бұрын
sweet flyin brother! hey you might try a "jumper" multi-protocol radio...i think it has the wl toys in it...theres a new model called the radiomaster boxer... wayyy better stick response! i have a couple that i fly my acro fpv kwads with and love it!
@NightFlyyer Жыл бұрын
Yes, My NX 8 and Radiomaster both have Hall effect sticks and are great for flying my planes and helicopters. Quite precise. I usually make videos with the stock stuff and radio first, but for sure will now switch this over to my Open TX Radiomaster TX16 S. Thanks kindly and happy flying.
@birdman316 Жыл бұрын
@@NightFlyyer koool! i need to hurry up n grab some cobra x v2 goggles b4 theyre gone again... my fatshark scouts have horrible range...
@dougkubash8673 Жыл бұрын
Definitely moves right along on the nitro motor! a lot less weight without the battery for the electric motors. Dave, it seems like there was another manufacturer of nitro motors of small nitro motors back in the day. Was it Wen possibly? Thanks! great video!
@NightFlyyer Жыл бұрын
Well, the same battery is still in it along with the motors, as something needed to power the radio. But for sure it really scoots. Wen Mac made .049s as well, but were harder to start. Thanks kindly, Doug.
@dougkubash8673 Жыл бұрын
@@NightFlyyer I had a hovercraft with a .049 Wen Mac motor! It was definitely harder to start!
@Candelaresearchcenter Жыл бұрын
Hi Dave. I have one of the 010 motors If you would like it plus two others that are slightly larger. We sent you a motor test stand years ago and would be happy to send you these engines. Have a wonderful day.
@NightFlyyer Жыл бұрын
Are you kidding me!? Of course I would love that and will make a video for sure. I loved the test stand. It of course was destroyed in the fire, and am sorry for that. My city and zip code is the same, but I have a new address that I don't publish. Maybe my PO box would be best.. #153. You are so kind, and I really appreciate you. Thanks very kindly.
@NightFlyyer Жыл бұрын
Had my own P.O. Box wrong in that first message.
@Candelaresearchcenter Жыл бұрын
@@NightFlyyer if you could just email me the whole po box city and state please thanks so much
@NightFlyyer Жыл бұрын
@@Candelaresearchcenter Where can I find you’re email address? Not sure if I have that.
@Candelaresearchcenter Жыл бұрын
@@NightFlyyer its on the about page in my channel,, ive tried typing it here but it keeps getting removed
@engineerahmed7248 Жыл бұрын
Only an rc champ pilot could bring it back in 1 piece, with no throttle control & bang bang controls. I figured this rc system has under 100m range too, which is pointless for a plane. So thinking about building rc heli or rc bike from its rc system 3 motor design is actually reverse redundant too ie if 1 motor fails, the other motors having to run dead motor make other motors overheat & fail too. Nonetheless it is a value for money parts pack.
@michaelsaint73256 ай бұрын
Congratulations you just made the first 3D airplane from Toys R Us
@NightFlyyer6 ай бұрын
Not really 3d stunt capable, but flies good. Thanks.
@3DMOFO2020 Жыл бұрын
Fantastic job on the converting to it to nitro Dave and on the flight as well with that deley issues your having on that radio that come with that plane will you be using your new Radiomaster TX16S instead for it?
@NightFlyyer Жыл бұрын
Yes, I may switch over, but I always review with the stock setup. I am used to flying strange things, so sloppy I am comfortable with and deal with it. Your right, I will probably now Bind my Radiomaster to it and see how that goes. Thanks so much.
@3DMOFO2020 Жыл бұрын
@@NightFlyyer Cool👍👍👍👍👍👍
@cranklabexplosion-labcentr82452 ай бұрын
I just found a perfect .49 with a 6” prop! Think this would work on a Genle Lady with a wing pod?
@NightFlyyer2 ай бұрын
Great. If I remember correct, a Gentle Lady was a glider and with a wing pod, it should work great with this engine. Thanks and good luck.
@hakology Жыл бұрын
g force +10
@NightFlyyer Жыл бұрын
That is the name of my video card. LOL. But strapping tape on the bottom of the wing, kept it from folding under those extreme g's. Thanks so kindly.
@hakology Жыл бұрын
@@NightFlyyer i did think it was going to fold at one point lol :) ;) nice little ripper though! keep up the good work i love your stuff! and thanks for the reply!
@NightFlyyer Жыл бұрын
@@hakology Me too!! Thanks again.
@VintageTechFan4 ай бұрын
Is that huge dead band maybe needed for the auto stabilizer to correctly recognize "let go" sticks, with likely not very tight tolerances at this price point? And this was what you meant by "semi-proportional"? It would drive me crazy, I even don't like too agressive expo for this reason.
@NightFlyyer4 ай бұрын
NO potentiometers. Just on /off, like the old days of pulse modulation flying. Its a pain, but I worked around it. I never use expo, even though I worked for Kraft R/C systems, who invented it. LOL. Thanks.
@VintageTechFan4 ай бұрын
@@NightFlyyer Thats an interesting combination ... it DOES have proportional servos though (but with this 5 pin connectors it ALSO looks very retro, with the electronics in the receiver and the servos just a motor and potentiometer) if I see it correctly, and a remote trim? So they "just" cheaped out on the joysticks in the transmitter?
@NightFlyyer4 ай бұрын
@@VintageTechFan Yep.
@Taintpainter22 ай бұрын
So on these cox planes how do u land and control the throttle or do you not? lol. Does it just run at the proper RPM and you control the lift and stuff? How do u stop it after landing just let it run outta gas or grab it or what? Like I said I have never had one and I found one in great shape at a flea market for 18.00 and now I’m hooked so I gotta learn. I remember my uncle having one in the early 80’s and hen I was a kid and always thought it was soooo cool.
@NightFlyyer2 ай бұрын
This is not a Cox plane. Its a modern electric that I converted. To modify it , I added the nitro engine. These tiny engines run wide open at constant speed. The elevator on this R/C plane is controlled by the transmitter's elevator stick and the rudder makes it turn. When it runs out of fuel, you must glide in for a landing, as shown. Good luck.
@davidlavergnelacasse2356 Жыл бұрын
Mr Herberts I would like to suggest a model easy to modify it is by far the best I have with a Cox .049 engine equipped with a trottle it is an ElectriFly by Great Planes - DE HAVILLAND TIGER MOTH SLOW EP ARF GPMA1134 I use a Dubro fuel tank it does the exact width of the fuselage it may seem excessively big but it's perfect and allows me to stay in the air for a long time i use elerons i cut out the lines already done on the wing add a servo in the center of the bottom of the wing it's a 4 channel now works really well super fun to fly very robust also I have added cables to add tension on the wings look super scale with a real engine it's a charm
@NightFlyyer Жыл бұрын
That is great. Thanks for sharing. I already put a Tee Dee version on my Liberty bipe. Cant wait til the weather changes, so I can fly it.
@davidlavergnelacasse2356 Жыл бұрын
The tee dee has so much more power I use it in rc cars
@fliegerdefunes775811 ай бұрын
Did you use 15% nitro in this 0,20? Idk my babe bees run pretty good but i just can`t get de 0.20 and 0.10 to run longer then a few seconds.
@NightFlyyer11 ай бұрын
I run only Torko 20% fuel in all my nitro engines. 20% should work better. The Higher the nitro the better it will stay running. Open the needle 2.5 turns and start from there.
@fliegerdefunes775811 ай бұрын
@@NightFlyyer Okay. I will try it with 2 1/2 i mostly started at 3 1/2. The proplem with the nitro is, that here in germany I can't buy anything with more then 16% and when I mix in more oil the nitro % is even lower. But I will see if I can get something with more nitro. Thank you :)
@fliegerdefunes775811 ай бұрын
Okay, quick update its running now on like 12% nitro. I forgot to install the little spring between tank and engine 🙃. I still will try to get some fuel with at least 25% so i have around 20% left after mixing it with oil.
@NightFlyyer11 ай бұрын
@@fliegerdefunes7758 It really should run fine on that. Use Synthetic oil instead of Castor and it should run fine. Let me know how it goes, or post you link to your video in the comments here. Thanks.
@jdsstegman Жыл бұрын
I think I have one. Not sure if it's what your looking for......
@NightFlyyer Жыл бұрын
Have what? The engine or the Cox Cessna Centurion? Thanks.
@jdsstegman Жыл бұрын
@NightFlyyer both. I will will open the attic and see if I still have it. I know I had one. Never flew it and I'm unsure of it's condition. It was given to me. If I still have it, I will reach out to you and send it your way.
@NightFlyyer Жыл бұрын
@@jdsstegman Wow. Thanks so much. I appreciate you.
@christopherknee57568 ай бұрын
The people at Cox must have been all deaf! How could they continue to make engines that were so noisy? Their "attempts" at mufflers were a joke - no meaningful quietening with way less power. With engines making such a din, it certainly did put the hobby in a good light.
@NightFlyyer8 ай бұрын
My wife used to work there and she still hears at 78, and me too. But loud as they were, they set my career in aviation in motion, so I owe them. If you look on the Coxengines.ca website, you will see they are very valuable now. You may enjoy my latest PT 19 video. Thanks so much. kzbin.info/www/bejne/eIaTq2qamdymors
@timokuusela5794 Жыл бұрын
That is refreshing, because I have zero respect to electric flying. To me it is a shortcut, a lazy persons way to get flying models without the hardship of real engines. More like this, back to the real RC that drones have almost destroyed by being troublemakers.
@NightFlyyer Жыл бұрын
I totally agree. Thanks much.
@ogaugeclockwork44073 ай бұрын
That’s cool!
@NightFlyyer3 ай бұрын
Thanks so kindly!
@tonywright82945 ай бұрын
DC Bambi was the smallest production engine not the cox 0.10
@NightFlyyer5 ай бұрын
Not true! The engine on this plane is a .020. I never said it was the smallest. If you want to see the true smallest, watch my Flying Shop rag video. kzbin.info/www/bejne/h2iwqHmMfaiFprs It has a .010 engine on it, made by Cox and still is and was the smallest production engine in the world. The DC Bambi is 0.15cc and is also diesel and was Manufactured in England in the late 1950's.