TILES | Modeling in Revit |

[@djurovicgiorgio]

Very creative method, thank you! You asked to let you know if we want more interior design videos, yes we do! Get well soon. Thanks again Niko

[@ubadaashaeib8237]

it is great vid and very helpfull you answered all my mind's quastions thank you very much

[@FarhaNzAsyraf]

This is well explained every details n really helpful. Thank u!

[@patrickoconnor3064]

Great tutorial! However I am having a bit of an issue. I am using Revit 2022, maybe they changed something? The problem I am having is that when I open the "Edit Type" there is no "Constraint Parameter" which means there is also no "Offset". Am I just doing something wrong? I do not really see what it could be, but obviously something is going on. Is it possible that I have a setting misconfigured somewhere? Help figuring this out would be greatly appreciated! Thanks!

[@waheedarshad0133]

What great idea about gap 😃

[@sportlol]

This system is superb for a grid tile system. Is it possible to place the tiles in an uneven way using this system, let's say each row of 60x30 tiles displaced by 1/3rd?

[@AlbrechtJ]

Thanks Niko for your good tutorial. Very helpful.

[@przemysawniedbaa5823]

So effective method brother! Thanks

[@lollipui]

This is very benificial for material take off perspective, but probably will be a lot of works for the draftman

[@NikoG]

This way only for interior architects))

[@anasstawqi4214]

It is great tips to do install tile profesionally.

[@immi85]

Supper Niko. Get well soon

[@rrrenzrobert]

Thank you so much! Very nice and clear video!

[@arieshoelace]

Awesome! Thanks for this video.

[@waheedarshad0133]

Good one

[@sevdajavandideh519]

thank you. this was very helpful. How do we apply the same thing to the floors?

[@NikoG]

you mean tiles? you can use "roof", the Roof also have the curtain syste,. just doit flat

[@nihalruwandeniya8255]

Thank you. Very helpful

[@ararena4075]

Great Work !!!!

[@haydarali8440]

Amazing design... Thanks

[@Wasim82m]

Great One

[@heisenbergww1957]

dont use curtain panel as a starting point as when while tagging it returns tiles as a curtain panel, so create a tile family with curtain panel level configurations and then address

[@walidhussain7998]

thanks alotttttttttttt, Perfect ,

[@paokpig]

can you do one vid for floor tiles ? i think creating a custom floor with tiles at the last layer would be nice

[@longbasket23]

I cannot find the Parameter "Constraints" in Edit Type, it is not showing. 2:46 Where to find it? I am using Revit 2025

[@游秉諭-b8x]

Hello, partner! I recently watched a video you posted on KZbin four years ago about using curtain walls for tile planning. Following your method, I was able to successfully create a design and perform quantity calculations. However, I encountered difficulties when dealing with the issue of 1/2 and 1/3 brick patterns. In Revit, while setting up a curtain wall, I noticed that the library provides curtain panel forms such as "1/2 Step Surface" and "1/3 Step." However, after importing these into my project, I found that these options could not be directly applied to curtain wall panels. I attempted some adjustments, but I still couldn't successfully utilize these panel types. My goal is to achieve a staggered pattern for the curtain wall gridlines, as shown in the example below. What I’d like to understand: Why can’t these specific curtain panel types be directly selected on the curtain wall? Could this issue be related to the curtain wall's grid settings, panel type, or other configurations in Revit? If these special panel types are necessary, how should I correctly set up or adjust the relevant configurations in Revit? I’d appreciate specific suggestions or step-by-step guidance to resolve this issue. Thank you!

[@locolegs1000]

Thanks for a creative solution! However it's a lot of steps just for creating tiles.... I will only try it when I have time to burn during the project or required to calculate the quantity. I will just put the texture on, then use the real-time rendering software for realistic look if I need to.

[@fyiarch]

Great video, good information

[@ashrafulalam7042]

Hi Sir, It’s good to have you here!! This is nice class but could you make an another video for floor tiles such as wall pls. I tried to do using this method but panel can’t fit to surface of floor !! Thanks n regards

[@arqcarol]

You can make it with roof and courtain panel.

[@iftekharkhan8879]

Hi Niko how is Ur health ....I want a video from Ur side about wall location line not basic but some advanced i.e when to Use which location line while creating wall etc ...plz while creating cladding which type of location line used ,lining wall etc plz make a.video as soon as possible thanku very much

[@I_kiza_real]

Is it can calculate Quantity volume/area ?

[@SaadFakhoury]

Thanks, sir for posting this video It is really helpful and beneficial 30-12-2020

[@JeffersonSandrin]

How can I make it for floors ?

[@immi85]

You can use same method with roof glazing for floor tile

[@sevdajavandideh519]

Also is there way to change the thickness of the wall?

[@BobbyZgangialf]

You can do it also with just 1 CWP 2 materials 2 parameters

[@Joyboyshorts555]

how to make garden interlock {road please make a toutorial please please please please

[@nuwansilva9131]

How about the Floor Tile?

[@ubadaashaeib8237]

it is the same you can chose Sloped glazing from roof tab

[@pankajkhairnar7588]

Hello sir...! Do we need license to make online revit tutorial on KZbin ?

[@denisgeovanda2155]

How to make ceramic tile in flor like tihs video

[@NikoG]

user curtain roof)

[@denisgeovanda2155]

Ok thanks

[@luisfe7187]

Nikko la casa pura #9 🙏

[@Husztiali6999]

Niko....where can I find those families ??

[@mustafasattar6808]

thank alot ,, please need help with somethin who can i contact u