Nilight LED Whip Lights for ATV or UTV I Installation

[@jthizzle559]

So my question is will the original 10 ft harness reach comfortable without any add ons if I won’t be using a switch ?? That’s my main concern I ordered them but I do not want to add an extra wiring harness. I rather turn them on and off with the Bluetooth remote.

[@A4Outdoors]

Yes, 10ft is plenty to reach buss bar. I would definitely wire it to the acc post on the buss bar.

[@rodrigoortega3186]

Thanks for the help!

[@Chancey36]

This was a great video. Installed a set on my Commander XTP. Side question. Can you tell me about your custom cup holder on the dash to the left of your tablet holder?

[@A4Outdoors]

Sure, here is the link: extrememetalproducts.com/i-23887309?q=x3

[@oicu81b42eh]

still working? yours have the spring, and if so how ya like that?

[@A4Outdoors]

Yes, whips are still working. I don’t have the springs…. Like them better without.

[@oicu81b42eh]

@@A4Outdoors thnks! was worried about the springs none of the top expensive whips come like that. have a bunch of nilight light bars and they are getting 2-3 yrs old and work great still

[@davidelliott4089]

So the fact these don't turn I'm gonna use springs. So the ground where did you go with that? And the Ted wire? You just ran to battery or to buzz connection? Great video

[@A4Outdoors]

I ran the negative to the buss bar and positive to a switch then to buss bar positive.

[@randy46534]

Question On your bracket, is that a 2 inch that you ordered? Or 1” 3/4

[@A4Outdoors]

Here is the link to the one I ordered: amzn.to/48vm107

[@joshpainter9653]

You saving me so much $$$

[@arturomedina5746]

Are these nilight flexible whips?

[@davidelliott4089]

I'm running a switch for new. Curious how you ran wire from switch to power. Ty

[@A4Outdoors]

I ran from the switch to the buss bar between the seats. You could also connect to the pigtail that’s behind the center part of the dash.

[@rbhe357]

I spent an hour looking up answers to various questions (unboxing, mounting, wiring, etc) while waiting for Amazon to deliver mine. This video covered it all. Even the same mounting brackets in the same location...but on a RZR. Only question I have is how to sync the 2 whips. Mine were sold individually, each with a remote. Will I need to carry 2 remotes or will 1 run 'em both?

[@A4Outdoors]

Awesome, glad I covered everything you were looking for. Since the whips are separate they will not sync but your remote may operate both. Example: in our group if one person changes their color it will change everyone’s color if we are close enough.

[@rbhe357]

@@A4Outdoors Got them installed and they work great/in sync with a single remote. If you walk some distance away it is possible that the remote only hits one of the lights. Push the button again and it's back in sync. The control modules are zip tied under the tunnel cover right between the seats so range isn't a concern. Plus I now have a backup remote in the glove box ;)

[@A4Outdoors]

@@rbhe357 awesome!

[@Jswans0]

Does anyone know what app can control these? I want to change my color alittle bit but for some reason my box was missing a user manual

[@juniorflores3129]

Can anyone help me with the name for the app on IOS ?

[@dannyelpyro3743]

Lmao i think i hooked it on wrong shit drained my brand new lithium ion battery