Ninebot Max G30 solid tire: REAR WHEEL - How to mount a puncture-proof tyre?

How to mount a solid tyre on the rear wheel of a Ninebot G30 Max? In this tutorial, we show you our method for:
Part 1: Removing the punctured tubeless tyre from the rear wheel.
Part 2: Installing a 10-inch solid tyre on the motor.
Tutorial for all Ninebot Max G30 KickScooter Powered By Segway: Max G30 - Max G30P - Max G30LP - G30D - MAX G30E II - MAX G30LE II - Etc.
We know that this is not an easy job. We hope you will find this tutorial useful. Please feel free to tell us if you succeeded in the comments, it's always nice to have your feedback (positive or negative) 💚🛴🔧💪 The MoovMoov Team.
⬇️ If there is a product in this tutorial that you need, check out the purchase links below:
For our American friends (amazon.com🇺🇸)
🛒 ✅ Solid Tire for Ninebot G30 : pixelfy.me/pGlW24
For our friends in the United Kingdom (amazon.co.uk🇬🇧)
🛒 ✅ Solid Tyre for Ninebot G30 : pixelfy.me/LaZFap
🛒 ✅ Hercules Tyre Levers: pixelfy.me/9fEwkH
--------
👉 If you are interested in the repair and maintenance of electric scooters and want to follow our work, then please subscribe to our channel by clicking on this link:
/ @moovmoov.global
👉 We have done other tutorials on how to change and install Ninebot scooter tyres. Here is the link to the playlist:
• NINEBOT
-
ℹ️⏱ Below are the major steps in this video for installing a FULL 60/70-6.5 (10 inch) tyre on the Rear wheel of a Ninebot G30 Max Scooter Powered by Segway:
00:00 - Introduction of Ninebot Max G30 solid tyre Rear wheel
00:37 - Removing the rear fork covers
02:00 - Accessing the battery compartment
03:31 - Disconnecting the motor
06:17 - Removing the rear wheel
07:20 - Removing the tyre from the rim
11:31 - Removing tubeless tyre 60/70-6.5
14:23 - Preparing to mount 10-inch solid tyre
15:31 - Mounting the puncture-proof tyre (Phase 1)
18:02 - Fitting the puncture-proof tyre (Phase 1)
20:36 - Mounting the solid tyre (Phase 2)
24:02 - Fitting the puncture-proof tyre (Phase 2)
25:24 - Remounting the solid wheel on the scooter
26:10 - Reconnecting the motor
27:45 - Closing the scooter
28:40 - Finishing touches

[@moovmoov.global]

Hi 👋 If there is a product in this tutorial that you need, check out the purchase links below ⬇️ : For our American friends (amazon.com🇺🇸) 🛒 ✅ Solid Tire for Ninebot G30 : pixelfy.me/pGlW24 For our friends in the United Kingdom (amazon.co.uk🇬🇧) 🛒 ✅ Solid Tyre for Ninebot G30 : pixelfy.me/LaZFap 🛒 ✅ Hercules Tyre Levers: pixelfy.me/9fEwkH Good repair 🛴💚

[@AvalanchCXVII]

Mate, you are the man. Thanks for taking all the time to do this.

[@theselfproclaimedretrogame9383]

After months of struggle trying to fit a regular tire, I bought the solid tire, much easier, the trick is really putting some of your weight on the base of the wheel, it will expand and open, soapy water helps a lot as well.

[@Scorpioakaryanhamulak]

I absolutely cannot get my tire on for the life of me

[@richeyrich6855]

Thank you so much for what is the best video on KZbin on this topic! Sincere thanks and Happy New Year.

[@garygary4856]

Thanks for the video. Good technique !!

[@andrewfield5656]

Bolted mine to a harbor freight floor mounted steel bender. Made quick work of it.

[@ElClavelitoMartinezTv]

U a beast!!! Appreciate it!!!!!

[@niteblaster1]

Brilliant video 😎 When the tire is on the rim and it's not aligned properly I'm going to try using some large plumbers grips to align the tire instead of using levers, I'll let you know if it works😂

[@au1947]

nice video

[@winniepeg2020]

Good video thanks 😎 I had an idea of a piece of plywood drill it and bolt the wheel down with a couple of slats of wood under it It will pull the rim onto the slats 🤔

[@benedettohero3123]

Do you know why the blue, yellow and brown wire has a different connector on my scooter?

[@Dreamghost21]

Dude same, the rear tire shrouds also have a different size Allen wrench, 2.5mm is too small and 3mm is too big :(

[@Pedro-do-Canada]

This thing is so hard

[@Weweewewwew]

I've tried to install this pneumatic tire same like this one, really hard to install I suggest going to a tire mechanic is best idea, because I've tried so hard to install but doesn't fit need right tools and skill and other thing is tubeless tires are best, because on these tires I can feel a small piece of concrete and so many bumps on footpath

[@Bigheadedwon]

good video, but I'll make a correction, you can remove the motor cable and plug it back in without having to remove the controller. I know this because I did it, but to be honest I didn't even know the controller came out like this. You just need to use some needle nose plyers. Also a note, even with plyers I did struggle a bit to get the cable unhooked, same when I rehooked it. So it may or may not be easier than removing the controller depending on how nimble your hands are.

[@user-sg3zq9eu1i]

This is straight bs

[@bigdumbguy2190]

Theres a few brands of solid tires to choose from, any suggestions on how to pick the best solid tire?

[@winniepeg2020]

The one he's using is the lightest one Honeycomb tires tend to flex and feel unstable

[@mattsteven3036]

is it just as comfortable as the air tyres

[@niteblaster1]

It's going to be much more bumpier I bet I'm going to fit some on in the inmotion S1 but it has suspension

[@ebiketradersebiketraders1501]

❤😊

[@Zignon1977]

Is it a normal t15 or is it a security t15 that needs to be used? Do you perhaps have a link? Thanks

[@lino5353]

A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.

[@jonprou8302]

You don’t mention what tools you use. Where do I get that screw driver and what’s it called. Please 🙏

[@lino5353]

A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.

[@blutvonn8725]

This looks harder than replacing with a regular tire, but whenever I'm able to put the tire on the rim if it doesn't inflate I have to resort to this...

[@sershanity8171]

I cannot center the god damn thing! 😢😭😭😭

[@brundidg1]

I’m having the same issue!

[@dirkgabrielpunzalan1102]

Whats the size of the tire?

[@freedom_born]

Says in the description. 10”

[@BIENTOT777]

Je déconseille ce pneu, il est de mauvaise qualité ! Il se déforme avec la chaleur, le froid, la gomme s'use très vite et quand de l'eau rentre dans le pneu, il se met à patiner et à tourner sur lui-même, donc vous ferez du sur place. I advise against this tire; it is of poor quality! It deforms with heat, cold, the rubber wears out very quickly, and when water enters the tire, it starts to skid and spin on itself, so you'll be stuck in one place.

[@GABEMOORE533]

🗣️THANK Y👤U .>🎤🛴