NINJA 400 PRELOAD ADJUSTER | GRX FRAME SLIDERS | ABS DELETE - Ep.07

[@OveRReV]

Additional info for the viewers, the reason for the one week delay was because the seller sent the wrong preload adjuster, it's for a Z650 which is about 0.5mm bigger, I already had the spacer cut short to fit the preload adjuster so I couldn't re-use the original fork cap as there won't be enough preload on the springs. The fork damper rod was modified to give a firmer damping for more control, used a thicker viscosity fork oil to achieve the desired effect, I don't use engine oil or gear oil like some "suspension tuners" do. Once I got hold of the correct preload adjusters I set the static sag to my preferred seting, same with the rear shock. What you didn't see in the video is I removed the ABS pump & rewired the wiring harness to the ECU so the speedometer still works & disabled the ABS warning light permanently, no more annoying warning light showing on the dash & we removed some dead weight from the bike. Slowly this Ninja 400 will transform into a full on track bike, more modifications are in store for this bike in the near future.

[@MotoWej]

Thank you so much sa support sir Lucius! Still can't believe na possible matanggal yung ABS pump without buying an ABS eliminator and lose the speedometer. Sayang hindi ko na document yung modification for ABS pump hehe around 3lbs din ang nawalang weight from the bike.

[@joselorenzodeleon5242]

Nice vid sir! May i know the brand and length ng front brake hose mo? About dun sa steering na tumatama pwede ka gumamit ng steering stopper katulad nung ginagamit ng mga naka race fairings, di mo nga lang mala lock yung steering and ang liit ng liko sobra hahaha

[@MotoWej]

@@joselorenzodeleon5242 thank you sir! Frentubo yung brand ng brake hose na non abs hehe regarding sa length hindi ko sure pero naka bike specific naman 😄

[@rakistangkulot]

san ka naka bili ng preload idol? tsaka ng grip? thanks

[@MotoWej]

For the grip kay motoscoot yan sir. Search mo sa fb motoscoot tapos eto yung link ng shopee for preload idol ph.shp.ee/N4gxyaV

[@Preztyj]

bro details ng clip ons mo? Name, price, san mo nabili tsaka mas mababa ba sya sa dati mong clip on? sakin kasi now naka stock handlebar pero nilagay ko sa ilalim,mababa sya kaso tumatama sa fairings at nagagasgas fairings ko hehe

[@MotoWej]

Yes sir mababa pa lalo. Search mo sa facebook 4MA bikepoint bro. Yung may riser type ang nakainstall sakin. Ang kaso lang dito tumatama talaga pag isasagad mo liko hahaha pang race fairings na setup para di tumama

[@Preztyj]

@@MotoWej salamat brother . RS 💚

[@MotoWej]

@@Preztyj salamat din sa suporta brother! RS!!