Ninja 400 Race Rails Install

[@Loxris]

That's a throwback I learned SOLIDWORKS in my Junior year of Highschool, cool to see someone using it themselves in a real world scenario. Beautiful bike too btw 👍

[@lmdmt]

Damn, you were playing a dangerous game drilling with your hand so close 😅

[@newportcity32]

Haha, yea. A calculated risk. Your username fits very well for this conversation

[@lmdmt]

@@newportcity32 very much so 😅

[@nippz2831]

plan on getting a ninja 400 in the future and wow ur bike looks very very sick great stuff

[@blertashehaj9999]

You just took it from "nice" to "superior". Great job!!

[@jeremyballard3635]

Ayeee bro, how did u get the red air inlets???? Looks 🔥

[@newportcity32]

I used fine sand paper to prep them, washed the parts, then used Dupli-color metal specks spray paint.

[@cami1262]

this mans a scientist

[@VirgilHawkinsIs]

Do you still have that file that you 3D printed? I could really use that if you have it posted somewhere online.

[@newportcity32]

Thingiverse, "ninja 400"

[@VirgilHawkinsIs]

@@newportcity32 you’re a legend. Thx bro.

[@jasonfarmer6814]

You can get some new rear sets that sit back just a little more and it moves your break and shifter back just a little as well I have a 2021 ninja 400 love the bike man it's hell of fun

[@lizkambas7332]

Dude your bike is looking fire !! New sub for sure..

[@insanexjokr7050]

Hey did you ever find different bolts to run through the motor mounts? I’m in the same spot I don’t really feel comfortable with the bolt only going half way. Thanks in advance.

[@OGPiePvP]

BRO ALL I HAVE TO SAY IS YOU HAD THE BOLTS LOOSE IN THE OTHER SIDE WHEN YOU SEEN THAT THE CLIP BEFORE LEGIT SAYS IM GONNA LEAVE THIS LOOSLEY TIGHTENED

[@sharonsharon2604]

Aren't these touching your shins while riding with your knees touching the fuel tank?

[@newportcity32]

Not if your 5 foot 4 😁

[@arturtoth3185]

Very competent work man

[@fernandof770]

Did you ever find those engine bolts? Where’d you find them? I’m planning on installing crash bars on my 400. Just got them a few days ago but want everything to be perfect like yours.

[@MOTOGLOCKG3]

Can you please let me know where you bought this? I need that for my 400 as well. Thank you

[@nickluffa7952]

Bro I have the same bike and same color but yours is 10 times better looking 😍 I just found your channel you should post a video of all of the stuff done to it

[@newportcity32]

Thank you, I plan to do a video covering everything once I have the bike how I want it. I'm looking at a new clutch kit and something to adjust the tune. I'm so close!

[@nickluffa7952]

@@newportcity32 hey what color red is that I think that’s be a sick rim color where did you get it?

[@nemesis2784]

That 3d part is dope man keep it up! I just got a ninja 400 and I didn’t really know how to approach it haha I want to add the rail on mines

[@newportcity32]

That's awesome man. Depends on what you want to do. A stock 400 is a great gateway into wrenching and turning your machine into something that's perfect for you

[@nemesis2784]

@@newportcity32 I got drill a hole to make the rail fit hopefully I don’t mess it up xD

[@4everdeekin795]

what color red is that Brodie? looks so good, nice bike bro.

[@adriansoto5018]

Candy red

[@oliverocket]

What's the name of the drill attachment used at 5:00? Keen to do this mod to my ninja too

[@newportcity32]

Hole saw

[@SGK23TV]

I got a brand new adjustable ImpakTech subcage w/2 extra pucks. Candy Blue. If you’re interested let me know. I paid $470 I’ll let it go for $350. ( decided not to do a stunt build)

[@DoitwithOA]

You still got it ?

[@williamrobinson4265]

is that an actual nos kit on this thing?

[@africano39]

Nice Bike brother ....Have the 2019 Red/Black w/ABS. Ordered fender eliminator, Leo Vince LV10 slip on(black)..cant wait..will order the race rail in red..as well.. read up on it as well, the rail that is ...I believe you can shave or sand it off...so it won't rub against your legs...not sure though

[@newportcity32]

Thank you, I was thinking about getting the red and black one too but it wasnt available in my area! So far I've gotten used to bending my leg around the rail but shaving that corner down is definitely on the list

[@williamarias3901]

How do you remove the air vent fairings?

[@newportcity32]

I got one of those little mirrors like a dentist would use to look in your mouth and a small Phillips head screw driver. The vent fairing has 3 screws holding it to the main fairing and then you can wiggle it out

[@siege_plat2942]

Wish my installation was as easy as yours lol it was a struggle🤣

[@iliketurtles4761]

Are you still going to make new videos??? 💚😎

[@newportcity32]

Barnett is having issues getting the springs manufactured and shipped but I've got all the parts to replace my clutch. Once those springs get in i want to do a video on that. then do progression videos on learning to wheelie 😁

[@Strict-Sandwich]

Hey, did you ever end up ordering that front engine mount bolt? I'm looking at doing this soon.

[@williamrobinson4265]

omg you did not have to custom manufacture a measuring device to center that plunge xD

[@Dragon-nd6qd]

Hey man am I just seeing things or is that an actual functional nitrous bottle there on the back? If so could you drop a link to the kit you used? Nice install btw!

[@iliketurtles4761]

It’s a brake fluid reservoir 😆.. I thought the same too till I heard him say what it was in a another one of he’s videos

[@SepuluhSeptember]

So detail 👍

[@adriansoto5018]

This man a scientist lol

[@raymadani270]

Thank you for sharing all your findings with us. Impaktech are not that transparent and honest with the audience. I was wondering their product fks with the rider's feet/shin and I know the answer now.

[@joelcarnaje3311]

Beautiful

[@Phalanx116]

Hey if you're in the Atlanta area I just purchased a crash cage from impaktech and would love some help putting it on when it arrives. I'm super nervous about the whole cutting the fairings. If you're interested in helping a noob it would be greatly appreciated. Let me know if you be interested in meeting up.👍🏽

[@newportcity32]

That sounds cool. You got tools?

[@Phalanx116]

@@newportcity32 Really thx bro. I'll buy whatever is needed. Also I just ordered it yesterday so it's probably going to be at least a month. 😅 We gat time

[@newportcity32]

@@Phalanx116 really just need a drill, 1 inch hole saw, and a socket set.

[@Phalanx116]

@@newportcity32 sure thing I pretty much have everything except for the saw. I'll get it and let you know when the cage arrives.

[@jeremyballard3635]

Fire 🔥did you paint the air inlets???

[@newportcity32]

I did. I used the same metallic red on all the silver bits. Even the gas tank

[@yahlisonayala9961]

Ouch I would of done that to an aftermarket faring instead

[@downfall2735]

Good Video!

[@newportcity32]

Thank you!

[@ADobbin1]

Aren't those frames gonna mess with your aerodynamics?

[@newportcity32]

Not too concerned about aero since im not taking this bike to the track

[@njcraz]

Nice machine

[@newportcity32]

Thank you!

[@JB-zx2py]

Should of bought a drop down adapter instead of drilling through your plastic

[@saryahhurtado348]

So it would avoid cutting the plastic also??

[@tranquilmind8487]

oh you rich rich i seen that house in the relfection

[@bdahmartlangte5551]

New sub

[@lancenathan1008]

Damnnn

[@jesusnieves2170]

Jesus fucking christ. There needs to be a ear bud warning when you start the dremil

[@claudioanf]

Kkkkk agora instala um par de rodinhas. Kkkkkkkk bolshit

[@newportcity32]

Uh.....si, me amo naji?