Ninja Foodi XL how to take apart

This video will show you how to take apart the Ninja Foodi Grill XL if you decide to adventure into this project.

[@Supercapp96]

thank you, you are a lifesaver! seems this is the ONLY video or guide of any sort on how to do this for the ninja grill, watching this helped me get mine back together- couldn't have done it without this!! thank you again

[@Rexxthespecialist]

You're welcome all you can do in return is give the video a like that should do it 😉 and yeah I did't see anything like it online. But I actually did it cuz someone suggested in my comment section. And I'm glad I was helpful to you 😊👍

[@escheidl]

Thank you for this video. I used entertain the thought of taking the fan out at some point to clean behind it. Now after watching this video I am very content to just get clean the areas I can reach with my fingers lol! Thank you for saving me from all the heartache I would have gone through from even attempting it. ☺👌👍

[@DallasTop]

I LOVE my Shark vacuums (and I prefer to use them with Dyson attachments) and I LOVE my Ninja appliances and our current Foodi, being our 3rd Ninja Air Fryer over the years. It is beyond frustrating that ALL manufacturers seem to make their Air Fryers far too much work to easily clean. Even being very mechanical myself, I cannot justify the amount of time required to do this. So I accept the fact that some routine cleaner with a commercial grill cleaner liquid is done every so often to keep the gunk under control, but a total tear down and deep clean and reassemble is just not worth the ~$150 they price these at at CostCo. But this is a great video and source of info

[@vswirl360]

Hello. Please help with a video about replacing the thermal fuse for the foodi grill. Some just stop heating up

[@Rexxthespecialist]

Sorry but what exactly happen?

[@Nicholas-h7j]

I have an e7 error. What does this mean and how do i fix it. Spent so many hours putting it back together. I started taking it apart to clean it better but didn’t realize there were nuts attached to the screws on the inside. That was a nightmare trying to take apart and put back together.

[@Rexxthespecialist]

Honestly is the first time I hear about Error 7 and for the research I did looks like is a motor (fan) problem. I believe you didn’t have that issue before taking that apart correct? And if that is correct I’m sure you didn’t connect everything back correctly or tight enough. Let me know if those assumptions are correct.

[@jaimeholguin2607]

I separated the cover from the base of a Ninja AG/IG 300; Right there it has two springs that serve to hold the lid when we open it to place or remove food. I don't now how these springs should be put in the original position. Could you tell me how to do it?

[@Rexxthespecialist]

Well unfortunately I just got rid of that model two week ago and I’m unable to record how to do it, the only advice I can give you now is to try to insert the springs when the lid is in the open position, but can be cumbersome so I suggest to put something undernit so it can hold that position. Again sorry that I can’t record a video to show you how.

[@jasonlove6166]

Hi Please help me, mine power is on but cannot started, it keeps saying lid shut

[@rafaelherrera3137]

Hi, could you tell me what kind of tools you used to remove the tap on the back please?

[@Rexxthespecialist]

Sorry I’m not sure what are you talking about, but what is the time stamp on the video that you’re referring to?

[@joseluisortizmonroy1144]

Those are called Torx

[@rohithsantosh3652]

How do you fix the shut lid error

[@Rexxthespecialist]

Can you please describe the issue with more detail? What do you mean by lid error? When you open the lid and the machine is still running?

[@celsoanjos2758]

I am looking how to open a ninja foodi smartlid??thanks

[@Rexxthespecialist]

Sorry for the late response but that’s the name of the Product NINJA Foodi Smart lid?

[@JasmineGeminiDragon]

Help I took off the nuts from the top and can't put it back in. How do I put them back on?

[@Rexxthespecialist]

I will love to help you, but I’m not quite sure which nut are you referring to, can you provide more details?

[@JasmineGeminiDragon]

@@Rexxthespecialist the one that holds those little metal brackets that holds the thing that goes around the fan? The metal bracket things that holds the shelf from hitting the fan? Do you know what I'm talking about? I accidentally unscrewed it and then all of a sudden I hear the nuts clattering inside and so I shook it a bit and the nuts fell off, and I realize there was no way I could put it back in.

[@Rexxthespecialist]

@@JasmineGeminiDragon ok now, is a time stamp in my video that you can indicate me more clearly? I think I know what are you referring to but I don't want to give you the wrong answer. And sorry that you are in this predicament

[@JasmineGeminiDragon]

@@Rexxthespecialist okay so it's like this, you know the brackets, the little bar things that holds on to the round dish thing that the fan spins around inside? The long L" or "[" Shaped bars that hold that round dish thing on the top of the oven? Where the fan spins inside? I unscrewed it FROM the top (ceiling) but I didn't know that the nuts that held it to the roof of the thing, wasn't welded to the inside of the oven top. The nuts rolled off to the inside of the roof, inside the machine. I had to use magnets and flip the machine around to get them out thru the vent. But I can't put them back on the bracket because they were screwed inside the oven top. So now it can't be put back on. How can I screw them back on?

[@Rexxthespecialist]

@@JasmineGeminiDragon Sorry to hear that but the only way to put them back you need to remove the upper plastic shroud as I show in the video ( 2:05 ) it happens to me as well but since I took apart the whole thing was not in issue. I hope and that answer your question

[@jamesbroussard9494]

He speaks and shows the video so fast you can’t follow what you need to do…

[@Rexxthespecialist]

You’re absolutely right, I’m getting better at making videos but I’m still far from been good. I will try to do better next time. Thanks for the comment.

[@stevenhildreth4674]

This is a very informative video and it helped me a lot. The fans at the top are confusing me as I put it back together.

[@Rexxthespecialist]

@@stevenhildreth4674 yes is a very tricky part to work with