Nintend Swich Lite LCD & Digitizer Replacement | kaputt

📱 Nintendo Switch Lite LCD & Touchscreen Set: bit.ly/3vUnv2z
📦 kaputt.de Shipping Repair Service (only in Germany): bit.ly/3vt4LrG
📱 Nintendo Switch Lite LCD: bit.ly/3MFfJjW
📱 Nintendo Switch Lite Touchscreen: bit.ly/3EZX67J
📲 Nintendo Switch Lite Repair Guide: bit.ly/3OKYbVi
►►Follow us on Social Media and be part for a more sustainable future◄◄
📷Instagram: / _kaputt.de_
🌎 Facebook: / kaputt.de
🐦 Twitter: / kaputt_de
💌 Newsletter: www.kaputt.de/newsletter/
📑 Blog: blog.kaputt.de/
🤗 Community: / kaputt.decommunity
You got questions or feedback, please let us know in the comments. We really appreciate every helpful input or happy to help you! 😊
Please subscribe and turn on the notification bell, if you don't want to miss any new videos!
Please note: This repair is at your own risk! kaputt.de GmbH does not take over any warranty for damages that occur during the own execution.
#NintendoSwitchLite #NintendoSwitchLiteScreen #RightToRepair
Musik: “Branches" by Malaventura Aus dem Free Musik Archive
CC BY-PD
freemusicarchive.org/music/Ma...

[@deitmarnino4826]

Me ayudó demasiado, muchas gracias ✨

[@scardinavia]

Good tutorial, but you need to fold the new screen ribbon cable back onto the rear of the screens and pass the end through the hole in the shell.

[@hellothere_24]

My switch is not turning on after lcd replacement. I don't know if it's a defective lcd or a loose/broken ribbon cable. Do the ribbon cable pins break easily when pushing it too far?

[@tophertopher7695]

I think your lcd is a problem

[@Jamie-xe1ux]

What double sided tape do you recommend?

[@iTutorialMakers]

3m couple mm wide

[@bradlee4309]

Where do I find this kind of tape?

[@Dark_Mario_Bros.]

Excellent video, it was easy enough to follow and replace

[@shearryberry]

Do i have to buy a new LCD? or can i just use my old one

[@alexdev7]

You should be able to use your old LCD screen. In the video, the robot voice mentions that it’s recommended replacing both the touchscreen digitizer and LCD screen. I’ve replaced an LCD and kept the same digitizer in the same switch once.

[@RBKing80]

Why did you use a grey digitiser yet at the end the pink one is back lol

[@CptnLykke]

Cause they broke their lcd and had to do it again

[@ranzkyle8027]

i do this but no display

[@sucy9436]

I didn't follow this tutorial, didn't show the results at the end smh

[@christiananaks16]

I STOPPED WATCHING AT 6:59 ! Not a good tutorial! They don’t show you how to pass the screen flex through the shell, they just skipped that part. How can can they leave out such an important detail ?

[@willy102073]

Too much work

[@johnDingoFoxVelocity]

Ok please let me explain. If you have purchased a cheap chinese screen replacement you got robbed there dead on arrival pay more then 50.00 for a screen replacement

[@nexxusty]

This is beyond ridiculous. Absolutely not going to even consider attempting this.