Nintendo N64 UltraHDMI 1080p Installation + Full Capacitor Replacement!

[@dragonshoardgaming5514]

Looks like my video got picked up by the algorithm. I appreciate all the views and comments I've received lately. I haven't uploaded to KZbin in almost a year but already had plans in place to address that so if you like this video please subscribe as I will be making a comeback soon. Also I'm very active on Twitter so if you would like to come and check out all the work I've been busy doing please give me a follow. twitter.com/DragonsHoardMod To all of you that are just now finding out about the UltraHDMI kit I'm sorry to tell you that it has been unavailable for OVER 1 Year! I actually recommend getting a N64 RGB board installed and to couple that with the OSSC as it will give you similar results to the UltraHDMI. Plus having the OSSC give you TONS more HDMI options for most of your other Retro Consoles. If you're really wanting the OSD (On Screen Display) I would recommend finding the N64RGB Advanced board. I will leave a few links below..... OSSC videogameperfection.com/products/open-source-scan-converter/ N64RGB Board etim.net.au/shop/shop.php?crn=207&rn=561&action=show_detail Need an Installer? I'm ready for you! dragonshoardgaming.com/info/N64RGB%20Advanced

[@RedArremer]

Pin your post so it will be at the top. Cheers!

[@dragonshoardgaming5514]

FirebrandX thanks! I thought I did that already. One of these days I’ll figure out how to do the KZbins lol.

[@Swish36]

They need to make more of this kit!

[@Valdorian]

It's 1am and i need to work tomorrow, why did i watch this? I dont even have the equipment to do these things. Anyway, very interesting how to do that transformation :D

[@Taobyby]

Sorry for the noob question but why do you replace those capacitors? Are they broken? Do you need the new ones for the UltraHDMI Kit? Is there a practical use besides a possible but not guaranteed longer livetime?

[@ManMountainMetals]

I am here. The algorithm sent me. 👍😂

[@dragonshoardgaming5514]

Glad you made it! lol

[@RoadRunnerMeep]

That's one hell of an impressive mod and the work that's gone into it

[@dragonshoardgaming5514]

Thanks! I wish these mod kits were available to purchase but sadly they haven't been available for over a year.

[@Petersorg]

Super clean Job! I usually hate music on videos, but I enjoyed the tunes you chose here.

[@dragonshoardgaming5514]

Thanks Pedro! In the future I will likely turn it down a bit and use some royalty free chip tunes or something like that but these are some of my favorite jams! Thanks for the comment!

[@06stangsc]

It's dangerous to go alone. Take this: You're*

[@dragonshoardgaming5514]

Damn grammar Nazis! lol kzbin.info/www/bejne/hGXZl2uEa6yjmq8

[@shoarmaschaap5460]

Grammar nazi

[@KyleFalconer1]

@@dragonshoardgaming5514 hey, good communication and language use is something we should all encourage. These mistakes are common and fixing these errors in your videos will really up your professionalism. Never stop learning, never stop improving!

[@MacEliot]

4:54 Nice ref to Don't Tell Mom the Babysitter's Dead.

[@dragonshoardgaming5514]

Holy crap! Someone else got the reference! lol

[@samirtheneo]

watched the whole video for those awesome musics, thanks to you, found a new genre, synthwave :)

[@dragonshoardgaming5514]

Now you will never go back! lol That first song gets me so pumped!

[@deanhandley556]

no idea how i got here glad i did great video you made that soldering look so easy liked and subbed

[@dragonshoardgaming5514]

Thank you for the sub! I hope to start uploading again soon.

[@Fernand0_]

soldering is sometimes stressful for me xddd

[@richieb74]

Those caps are made really well I’ve never seen a bad one. The n64 has amazing build quality. Shouldn’t have to replace them

[@dragonshoardgaming5514]

richieb74 you are correct. The caps used in N64 consoles are of high quality and I have yet to run into bad ones in a N64. I offer the service as a preventative maintenance as all electrolytic will fail over time and some customers prefer me to change them out while I’m inside their consoles doing other work. Thanks for the comment!

[@ryutenmen]

On the old Nintendo products you can see the logo "Official Nintendo Seal of quality". That really meant something.

[@Roensmusic]

Really nice build man, good stuff

[@dragonshoardgaming5514]

Thank you!

[@alejandrovelasquez8063]

It looks like a really fun -albeit challenging- mod, I really hope I can do it some day.

[@dragonshoardgaming5514]

You can! It just takes practice.... and a UltraHDMI kit which are impossible to get ahold of these days.

[@emmettturner9452]

Also, you don't have to use anything other than the D-pad when using the UltraHDMI OSD menu, which really helps reduce accidental inputs. Right is Accept/Proceed and Left is Back/Cancel.

[@Pickchore]

Looks interesting but I would've liked a full screen of the results.... The window with you pushing buttons on the pad was bigger than the game.

[@dragonshoardgaming5514]

There are a lot better videos showing off the UltraHDMI kit if searched. This was meant to be a way for me to show off my skillz to potential customers.

[@Hexsyn]

Pardon my ignorance, but what does replacing rhe capacitors accomplish if they arent malfunctioning in the first place? Is it just added security to them not failing in the near future? Or is there a quality gain?

[@blackarrow8683]

4:33 👨🏻‍🏫 Which T12 tip is this? 🙈 Or which Ksger T-12 soldering tip would you recommend for the SMD caps? 💕😍

[@goldensilence5841]

I'm confused does adding the hdmi mod all of a sudden upscale the quality of everything it outputs

[@blinkachu3394]

Depends on whether the HDMI card upscales yes or no, some do, some don't. But it allows you to easily connect old consoles such as this to HDTVs, not only through the ease of use with just 1 cable rather than having to use something like an OSCC, but also the signal itself is way easier for the TV to recognize as its a digital signal out of the console, rather than an analogue one that needs to be converted by either the TV or a separate upscaler.

[@gabrielhartmann5570]

DAVID HASSELHOFF IS GOD

[@dragonshoardgaming5514]

Don’t hassle the Hoff!

[@entrenamientoymas]

hahahah i couldnt believe it hahahaha, It's from Kung Fury!!!

[@dfive444]

Excellent work and loved the subtitles 😀

[@dragonshoardgaming5514]

Thanks! Was different than my usual video but IMO turned out great.

[@DownUnder43]

Far out man, Jedi Skills soldering right there

[@dragonshoardgaming5514]

Thank you! I’ve had a lot of practice.

[@terdiurnal1233]

I know no one is going to see this but the grounding bracelet does nothing without the console being grounded as well

[@dragonshoardgaming5514]

Yeah but it looks cool!

[@greyfoxplays9336]

First and only video where i seeing someone wear a ESD strap 👍🏻👌🏼 any other video i seeing they do replacement or swaps of electronic components without wearing one

[@dragonshoardgaming5514]

I'll be honest and say that I don't usually wear one and have NEVER had an issue with ESD. BUT.... I did want to show that it is a good idea to have one.

[@greyfoxplays9336]

Dragons Hoard Gaming well is highly recommended to use one we never know when something might end up getting damage by static

[@Sandro.urrunaga]

Can you make a video that shows how to make n64 controllers wireless? I've seen it done on another KZbin video, but it doesn't show steps.

[@hariv5664]

Man the BGM gave a perfect feeling for a console like that 😍😍😍 I love this video

[@ManivOleg]

it is really "jewelry work". I impressed

[@dragonshoardgaming5514]

Thanks! Just takes practice!

[@Dadu...]

Holly sh... That was amazing!!!!! Greetings from México

[@dragonshoardgaming5514]

Gracias!

[@todosobreandroidrivera213]

Nice video bro 👌🏼 The music was a great touch.

[@dragonshoardgaming5514]

Thanks I was heavy into listening to this back when I recorded the video. That first song always gets me pumped up! lol

[@Stormf0rce999]

Brilliant video, great video/audio/ presentation :)

[@dragonshoardgaming5514]

Thanks! That means a lot! Really.

[@st.m.6187]

The algorithm sent me here... i am from greece.. nice job

[@dragonshoardgaming5514]

Greetings! Glad you found this video. Thanks for the compliment!

[@st.m.6187]

@@dragonshoardgaming5514 you have very interesting Channel i sub... Thanks for the heart ❤️

[@manwinderpanesar]

You are so hardworking guy

[@dragonshoardgaming5514]

Thanks!

[@jbears4779]

As soon as I heard Hasselhoff I liked and subbed.

[@jakethesnake4040]

What do the new caps do for the system ? I’m curious as I’ve never heard of changing em

[@HavokTheToast]

This is an old comment, but my best guess is that capacitors from 1999 - 2007 were prone to failure and they simply replaced the caps just to prevent any failure from potentially faulty caps.

[@jakethesnake4040]

@@HavokTheToast thank you. Despite the age of the comment I forgot the question and never did get an answer so I appreciate you giving one.

[@nickz1614]

This got recommended to me. I never watch videos like this. Soldered for 10 years for a living. For the defense industry. Always like watching someone else do it!. Your iron was huge ! I always had Metcals. And low res flux I remember smelled like pancake syrup . Nice job bud.

[@sato4kaiba]

@15:10 I was expecting you to use hot glue on the flex cable near the soldered points so that to limit movement of shock if dropped or bounced. Nice work

[@dragonshoardgaming5514]

I do my best to NEVER have to use hot glue for any of my work. If you solder correctly using good quality flux and solder it will not be an issue. Save the Hot Glue for your macaroni art projects! lol Thanks for the comment!

[@nemoex]

Very nice, that's the first Mod Video wear the music was as nice as the Mod Work.👍

[@dragonshoardgaming5514]

Yeah no monetization for me! Lol But at least you get some descent jams to go along with the video. Thanks for the comment!

[@michelsaoud6521]

Hey this guy is very good , thumbs up bro

[@dragonshoardgaming5514]

Thanks Michel! I appreciate that.

[@michelsaoud6521]

Your welcome bro

[@leonardocaldasmonteiro9999]

Great Video Man , Great great Great!!! i jus subscribe right now , keep doing :D , ah i almost forgot , that song by David Hasselhoff was Awesome

[@dragonshoardgaming5514]

Thanks for the sub! I haven't uploaded in almost a year as I've been swamped with mod work but I hope to change that soon and Hoff is the Man!

[@emmettturner9452]

Great video! Just thought I'd add my tips, since I've done a few hundred of these. ;) First, there's usually no need to deliberately remove the Expansion/Jumped Pak. It'll typically pop off with the top shell! Next, make sure you lift the heat sink from the back (cartridge slot side) or you risk lifting the RAM, with only has enough pins on the back side. Third, the cart slot is removable in case you need more room to work. Just lift both sides evenly to avoid breaking the plastic wings. Probably a good idea to look under there anyway and try to remove debris that has settled. Some of them look really nasty even though it's usually just factory flux leftovers and a little dust/hair. Fourth, the cable has notches that you are supposed to fold between in order to make your two folds. It's usually best to make that first one before you make your PIF/via connection. Last, make sure you slot the heat sink tabs inside both sides of the Expansion/Jumper Pak slot before you screw anything else down to ensure proper alignment. I can't count how many times I've found it improperly seated after someone else has been inside (typically when I salvage someone's failed UltraHDMI install).

[@TalonNismo]

Hello Emmet, good info on top of an already great video. Rockin’

[@emmettturner9452]

@@TalonNismo Thank you

[@petefisher6689]

I am thinking of buying the Ultra HDMI kit. Would you be willing to do it for me?

[@RunnerBalz]

Very very nice video!

[@dragonshoardgaming5514]

Thank you! I appreciate your comment. More videos to come in 2019!

[@eastwoodplay]

Omg.... Love the music, thanks!!!

[@dragonshoardgaming5514]

Glad you enjoyed it! Some not so much. lol

[@agsgameplay]

Thank you so much! I really appreciate that! In future I will buy one with you :)

[@dragonshoardgaming5514]

Honestly I loved the UltraHDMI kit when it was available but sadly it is not now. Fingers crossed we get something comparable in the future.

[@guiagaston7273]

I don't understand this. Does it upscale the image to 1080p? Because the n64 is still putting out the resolution it had before or not?

[@dragonshoardgaming5514]

You may read up more on the kit that is unobtainable here. ultrahdmi.retroactive.be/

[@BrandonAlbers]

What temperature do you have your reflow station set at? And what air speed?

[@mauriliosavio1381]

Congratulations on your great work on modifying the console. I'm a new subscriber. Is this mod equivalent to an adapter that is sold on the market that is inserted in the av output of the nintendo 64? Here in Brazil it is common to make the mod rgb (which is not native to the console). This hdmi mod is new to me. Success for you.

[@inceptional]

If a Nintendo 64 Mini comes out then I hope the games look at least this good. Also, boy would I loved to see it released in the full funtastic colour range.

[@ladycherokee5382]

Hey I like the video it was cool but I got a question for you I got a hyperkin unit that has regular Nintendo game on it at the front and at the back it's got another area for an N64 and the front one quit working what do I do to fix it later you have a good evening

[@SoloKeita]

I have this same Nintendo NUS-CPU-09 2000 board in my Pokemon N64 with Pikachu on it and it needs new capacitors. It turns out these boards caps go bad and can result in no sound like on my board. I just ordered some new caps and I will be replacing them to fix it. I just wish I had an UltraHDMI kit to put in it as well!!

[@leondreamcast]

I’m currently in an EBay bid for a Jungle Green N64 on EBay and this video found me lol then this means I’m definitely getting it

[@Penfold8]

Instead of scratching away the solder mask with a scalpel an easier way is to use a fiberglass pen and it will reduce the possibility of accidentally cutting a trace.

[@burnttamale]

I bought a modded n64 with hdmi from and old lady a while back for like 30 dollars. Sadly the hdmi port didn’t work. But the console did

[@dragonshoardgaming5514]

This story is lacking in tons of details! lol.

[@angeloavellar3027]

Us there a reason to change the capacitors? were them busted or was it needed for the HDMI add-on? Sorry I'm very noob on these things

[@tidybloom1844]

It's 320x240px scaled to 1080p right?

[@allwaizeright9705]

So do you HAVE To replace all of the caps to add the HDMI or is this just 2 separate procedures in 1 ..

[@dragonshoardgaming5514]

No cap replacement is not necessary and just a service that I provide my customers if they would like.

[@hello7pm]

This is really cool. 11-12 year old me regrets selling my old consoles like NES, N64, Dreamcast, Playstation 1+2

[@dragonshoardgaming5514]

Thanks! There are tons of options to play your old games. Original hardware, emulators, FPGA ect... Just depends what your needs/wants are. Jump in and re-live the good 'ol days!

[@ayoungtricknamedjim5498]

Man, those shits are cheap now. I've regretted selling my Dreamcast four different times over the past 15 years, and I just repurchased it every time. I currently have one that is, again, sitting in a closet :/

[@soportetorreon8102]

dudeeeeeee so awesome... nice work dude... how much the hdmi board?

[@dragonshoardgaming5514]

Thanks! UltraHDMI boards sadly have not been available for over a year! I actually suggest other options to my customers I've linked them in the pinned comment.

[@soportetorreon8102]

@@dragonshoardgaming5514 TY SO MUCH ANY WAY!!!! KEEP THAT GOOD JOB, YOU INSPIRE ME!!!! TY AGAIN!!! :D

[@robin4970]

Any reason I need to use a desoldering iron? Btw do you have a link to Jason's mod?

[@HoneybadgerProductions]

So where did you purchase those caps and the HDMI mod?

[@steveothehulk]

Why can’t you buy the hdmi kit anymore?

[@dragonshoardgaming5514]

It's a conspiracy. First they release it and get everybody excited and buying it and just when it is super popular they stop making it. Not sure what's the next step in their plan. lol

[@steveothehulk]

Dragons Hoard Gaming a revision of the kit is being worked on apparently

[@joshua199628]

Question here.. How can you tell which caps goes where ? In the N64 PowerSupply ??

[@heliosaboia983]

Fantastic!!! Congratulations!!!!

[@banditkeithkingofduelmonsters]

Is there a kit to purchase? Is there a cheap place that sells all the capacitors? I'm trying to fix an n64 with purple looking video output and I assume it's one of the bad capacitors but I don't know what kind of capacitors to buy.

[@dragonshoardgaming5514]

I purchase all my cap kits from Luke @Console5.com. Luke sources only high quality components for all his kits plus has lots of great pics and capacitor maps available on his online wiki. Link for N64 Cap Kit... console5.com/store/n64-nintendo-64-smd-cap-kit.html

[@banditkeithkingofduelmonsters]

@@dragonshoardgaming5514 Alright, thanks. That was the only website that I had found on my search for a kit for the board of capacitors so I had it saved under my favorites. Obviously there is the power plug but I don't need to fix that. I actually have a number of extra n64 boards I got off ebay and it seems the common problem is nothing showing up on screen (flash but nothing comes up like the game is dirty) even when using a tested working cartridge connector and cleaning all the boards with isopropyl.

[@autisticcommando86]

I'd love to see the Dreamcast version of this, as I presume the isolate board might work with Dreamcast, if soldered correctly.

[@dragonshoardgaming5514]

Ask and ye shall receive! Lol This is one of my longer form videos but that’s because I take the time to breakdown and show EVERYTHING. kzbin.info/www/bejne/p3SUlHifa9OJbpI

[@bingobaz6402]

Is it essential to do the capacitors? Also can I send my n64 for you to mod and what would that cost?

[@Raampage]

Do you do such modifications? what price ?

[@5punkybob]

Is it really worth replacing the capacitors? My issue is my cart slot only works if I pull the cart forward on boot then it works fine afterwards

[@dragonshoardgaming5514]

IMO replacing the caps in a N64 is nowhere near as important as in something like say the GameGear. The caps in the N64 are of great quality and I only offer the service as a preventative maintenance. It sounds like to me you need to clean your cartridge connector, games or both.

[@srverinfo]

Superb work!

[@agentchris1482]

Just finished playing my n64 but noticed it gets hot rather fast. What do you think could be the cause? Great video btw!

[@dragonshoardgaming5514]

N64 runs hot as there is no internal fan or anything for cooling, that's why the top has that massive heatsink.

[@agentchris1482]

Dragons Hoard Gaming Ah okay thanks for the reply!

[@robertdickey6028]

Where is a good place to purchase console housing shells?

[@robson3204]

Olá boa noite, amigo gostaria de tirar uma duvida com você, eu comprei um Nintendo 64 no Mercadolivre e veio um cabo AV de três cores branco, vermelho e amarelo e quando coloquei na Tv antiga de tubo da LG, a imagem ficou ruim, cara eu não sei se o problema é o cabo, fita de jogo que veio, ou o próprio vídeo game? Poderia me ajudar?

[@vicecitychico]

i wanna do that to my n64? how much is the total for that process with those chips and install? Thanks

[@dragonshoardgaming5514]

Kit is unavailable and has been for over a year. I have other options in my pinned comment.

[@Toxicity1987]

You forgot to replace C2 (on the low right of the RAM chip) C160 and C161 (upper left), not important because its a ceramic one, but still not a full capacitor replacement. /s

[@dragonshoardgaming5514]

Yeah and about 100 more ceramics on the other side of the board. Generally a full recap is replacing just the electrolytics as ceramics aren't known for rupturing and leaking caustic fluid on the board.

[@dodo2023-d1x]

your store is offline, i want buy this high quality caps, you have some link?

[@venihernandez7349]

Guessing since it's ESD I neeeeeed to be really careful with static lol

[@dr3ad698]

i Hear Turboslash - Rush! and now im motivated

[@Heribertoexe]

Great man. Very good...

[@dragonshoardgaming5514]

Thank you! I'm glad you enjoyed it.

[@HypronoDad]

the music is too loud. Better if you would have pushed it to the background a bit. It was too disturbing so I muted the video. Hopefully I did not miss anything you spoke (if you did).

[@yahweh1x543]

What issues does the console give when the caps go bad? Excellent video by the way!

[@HansBelphegor]

Dead console

[@indcsion]

Would a failing power brick cause the screen to go black and say no sync? Its an official power supply. It sucks if they didnt recap it if it comes with the kit. I just bought another power supply and it was fine for the 30mins I played. Im just hoping its not a fluke because the black screens were kinda random. I was getting a yellow tint a few months ago but I havent seen that in awhile

[@dragonshoardgaming5514]

Any update on this? Did the new power supply fix the issue?

[@indcsion]

@@dragonshoardgaming5514 I believe so, it hasnt happened again.

[@emmettturner9452]

Many years ago I identified one PSU that caused this out of several. I later fixed it by replacing the capacitors.

[@emilywilliams3191]

Anyone know why there is a power cable attached to his arm?

[@dragonshoardgaming5514]

Shhhhh I'm a android.

[@Macky4941]

I went from watching Chinese retro handhelds to here.. Awesome!

[@dragonshoardgaming5514]

Well, glad you found it! Thanks!

[@Macky4941]

@@dragonshoardgaming5514 thanks for your content, subscribed and look forward to future videos.

[@edgartorres5461]

I’ll be getting your modding services hoping in near future when I’m ready I will too have a rare ice blue n64 I think 🤔 nice job guy your cool 😎

[@TheGameCollector1]

Hi. What is the reason for HDMI. A better solution?

[@dragonshoardgaming5514]

Yes. Most people that go to hook up their N64 these days do it via composite into their flat screens or use one of those AV to HDMI boxes that make the image worse. Check out RetroRGBs site for more info. www.retrorgb.com/ultrahdmi.html

[@mr.selfdestruct3101]

Whats around your wrist ??kinda buggin me ! Anyone know ? Wife tied you to the couch before she left ?

[@dragonshoardgaming5514]

While you are correct my wife does chain me down to get work done but she uses the old ball and chain around my ankle lol. What I'm wearing is a electrostatic wrist strap. Thanks for the comment.

[@BlueClefto]

*Reads "your"* Time to go to the comment section

[@frankrodriguez1981]

Canido lol same. After the second time I was like. Popcorn time.

[@ayoungtricknamedjim5498]

also "to" vs "too". I thought at first he was some kid and then at the end I realized he's a fully realized adult male with shit tons of money and wondered where the hell he went to school to come out like that...

[@mvortex701]

Excellent tutorial, really helpful, just the song calls action or something is really horrible

[@dragonshoardgaming5514]

I cant believe you be dissin The Hoff like that! lol Thanks for the comment.

[@mctapout187]

I had that exact same color n64 from walmart my mom bought for me on my bday, goodtimes...goodtimes

[@dragonshoardgaming5514]

Man I remember getting to play a Mario 64 at Walmart when I was a kid and thinking the graphics just can't get any better! lol

[@mctapout187]

Same same.......I played Goldeneye 007, and thought the characters and environment was super realistic lol

[@dragonshoardgaming5514]

mctapout187 definitely not a game that aged well! I loved that game as a kid playing multiplayer with my brothers but my eyes just can’t take it! Lol

[@andrewmeadows2596]

Personally I prefer commentary as I'm so busy reading the captions i can't concentrate on what your doing. Especially as the footage is sped up also. Interesting vid though.

[@dragonshoardgaming5514]

Thanks Andrew. Yeah like I stated in the begging I lost the audio so I just wanted to try it this way. I think in the future I will just do voice over.

[@renzocamaro2629]

Olá boa tarde! Gostaria de jogar Nintendo 64 na TV Samsung 1080p Full HD, poderia me indicar qual conversor ideal posso esta usando para imagem ficar boa na minha tv? Tá complicado aqui amigo.

[@JoshyRyan]

Would love a n64 HDMI console

[@dragonshoardgaming5514]

Me too! These kits have been unavailable for over a year! I have some other solutions in my pinned comment for getting your N64 to your flatscreen via HDMI that are comparable to the UltraHDMI.

[@TheK20eg]

How much do u charge for this? Adding the hdmi and changing the caps?

[@erickruizz.]

Why need you change the cap?

[@dragonshoardgaming5514]

I do it as preventative maintenance as overtime all electrolytic capacitors can fail. N64 caps are of good quality but some customers prefer me to change them out will I’m doing other work on their consoles.

[@DoubleVGames]

Great video! How long do you think these new capactors will last for? I'm curious of how often one may need to replace them

[@dragonshoardgaming5514]

Well the ones in the N64 are already very nice high quality caps and have already lasted 25+ years. I consider this to be preventative maintenance and would hope that the new high quality caps I use would last another 25+ years. However some consoles have extremely piss pore quality caps and if haven't been recapped by now have probably leaked and done damage to the board! Like the Sega Game Gear, Sega CD or NEC Turbo Duo all had shit 90's era SMD caps.

[@DoubleVGames]

Dragons Hoard Gaming oh wow. I didn’t realize there is an off chance of old caps damaging the board :o I’m just starting to learn about this stuff. Thanks the PSA!

[@clay2889]

very impressive dude

[@Eth3realwarrior]

So, how hard are these hdmi kits to find nowadays? Thx

[@dragonshoardgaming5514]

Impossible. If you do you will pay 3x the amount as the kit hasn't been released in over a year. I've been recommending the N64RGB board and OSSC as it can give you similiar results to the UltraHDMI. Links in my pinned comment.

[@roystonevans2223]

Damn, I've only just seen this.... Great video man... Very professional...👌

[@Eth3realwarrior]

@@dragonshoardgaming5514 wow! Excellent advice, and I heard the RGB mod is more straight forward/easier to do. I just wish it had the anti aliasing off mode. Just one more question? Why was it out of production?

[@KenstigmonTM]

I Need one for a Dreamcast, where find it?????

[@dragonshoardgaming5514]

Citrus3000psi’s DCDigital kit is what your looking for. He should be listing more this week on his site. Follow his twitter for updates. shop.dansprojects.com/dcdigital-pre-order.html

[@Junkman444]

Play a game for 10 to 15 minutes to warm up the heat sinks makes it really easy to disassemble.

[@dragonshoardgaming5514]

That is a great tip! Thanks.

[@tomwood5706]

Awesome video thanks bro

[@fillippy]

Amazing job!

[@menacing_hammer7]

U got some skills mate nice job! I would love to have UltraHD on my N64 console so I am wondering if is possible would you willing to do mine cuz I don’t want to mess it up on my own which I never try it before. Let me know if u have a chance to do it I be much appreciated it

[@chefkdowg]

Cool, why the compasator change?

[@dragonshoardgaming5514]

Just some preventative maintenance to make sure the console is running at its best.

[@Tjs_powersports]

A dremel would have worked better with a chainsaw sharpening bit on low speed its more precise

[@dragonshoardgaming5514]

In my experience dremels like to grab and I'm just not comfortable taking the risk of damaging a customers console. I've hand filed 100's of HDMI ports since this video so I've gotten a lot better. Thanks!