Literally dm'ed him less than a week ago about tips and tricks for a swap and he drops this video, actually mind blowing. thanks aaron, hope u droop part 2 soon. i appreciate it
@Thecrookedking153 жыл бұрын
❤❤👊🏻 PART 2 out tomorrow🔥 Thank you my dude, and thank you for the love and support💪 Im sorry if I lagged on getting back on a DM I try to get back to everyone, just busy lol all love brotha
@gregorybraylen3433 жыл бұрын
Sorry to be offtopic but does any of you know a way to log back into an instagram account..? I was stupid forgot my password. I love any tips you can offer me.
@geraldwesley26173 жыл бұрын
@Gregory Braylen instablaster =)
@gregorybraylen3433 жыл бұрын
@Gerald Wesley I really appreciate your reply. I got to the site on google and I'm in the hacking process now. I see it takes quite some time so I will reply here later with my results.
@chaseholliday95093 жыл бұрын
You just relieved so much stress off my shoulders bro! Iv been trying to find a video that’s this specific and helps me just like this! Haven’t found a single video where they tell me exactly what I need and then the install!
@Thecrookedking153 жыл бұрын
Haha HELL YEA!!! Glad I could help!!!! ❤🙏💯💪Get it my dude and if you got other questions hit me up on my Instagram DM me!!!!
@lovettgaither79673 жыл бұрын
Great video! The AT pilot bearing kicked my a**. I bought/ returned / bought bearing pullers that all failed. Then , the bearing puller I rented flexed too much and would come out on the 2nd /3rd hit. I had to tag in help to get my pilot bearing out ... I'm also convinced that I need my own shop space for my hobbies. Keep putting out quality content.
@dancingwulf33512 жыл бұрын
I found one of those transmission forks when I was younger a thought it was an ice scrapper. mystery finally solved xd good vid💯
@Thecrookedking152 жыл бұрын
😆😆😆😆 def mess your window up LMAO, thank you so much!!❤
@overipecolt2463 жыл бұрын
That's awesome that little bro got all his stuff together to swap it , get part 2 out soon
@Thecrookedking153 жыл бұрын
Hell Yea, been putting it together for a while now too, its finally DONE😈👊🏻🔥 Part 2 Out tomorrow at 9am🤙
@itsmeyaboi18303 жыл бұрын
I’ve been waiting for a video like this! I’ve wanted to swap to a manual for a while now but had no clue how to go about it
@Thecrookedking153 жыл бұрын
I hope it helped🙏🙏Let me know If you have any questions about it, you can message me on here or DM me🤙❤
@zerohourdrift3 жыл бұрын
Isn’t that Gustavo’s car?😂 never mind you said it right after the intro 😂
@Thecrookedking153 жыл бұрын
Lol Yessir it is🤙
@entosthia2 жыл бұрын
I know I’m late to the party but you have saved me 🙏 much love bro
@Thecrookedking152 жыл бұрын
LOL better late than never...💯💪🙏 appreciate that man, much love always💯🙏❤
@steambuns22833 жыл бұрын
ngl been watching some of your vids and your intro was a banger.
@Thecrookedking153 жыл бұрын
🙏🙏🙏 thank you so much!!
@JoseDemetrioGonzalez3 жыл бұрын
Good video, I love how you explain every detail, I have never found a video like this that explains step by step I look forward to the next video I don't care how long the next video is, you have all my interest, good job🙌🏼
@Thecrookedking153 жыл бұрын
🙏🙏🙏❤Thank you Thank you so much!!!! Appreciate you, all love🤙
@euclidesestribi9008 Жыл бұрын
Hi Aaron, I'm looking into doing the trans swap and I would need the ECU mod, is there any information you could share with regrading the guys that do this upgrade, maybe share with me the contact and thanks again for such an amazing content you are throwing out there for our community.. Hands down brother!
@PVOSQUAD3653 жыл бұрын
Comment before the video because I know it’s going to be a dope vlog.
@Thecrookedking153 жыл бұрын
MVP🔥❤appreciate you brotha, all love
@erosnunez42563 жыл бұрын
This video helped me swap mine. You saved me tons of labor money thank you!
@Thecrookedking153 жыл бұрын
Great to hear! Youre welcome brother!!!! hell yea!! much love🙏❤
@Bryan-jb8ky2 жыл бұрын
@@Thecrookedking15 how much is the conversion?
@dirtyr19372 жыл бұрын
Ok i have a rev up motor with low miles but the motor is blown. I got it like that. I have a vq non rev up AT. I want to put my 6mt into my vq. Can I re use all the parts when I swap. ?
@eyeamfresh823 жыл бұрын
Glad to see the lift working 👌🏻🤙🏻🤘🏻👍🏻
@Thecrookedking153 жыл бұрын
🤦♂️About time right, LOL😂 thanks for noticing....... lol
@flazowk18812 жыл бұрын
1000th like keep up the content!!!, also thanks for showing and describing the swap.
@BigBoyz333 жыл бұрын
bro i didnt know you had a youtube channel LMAO subbed fr tho
@Thecrookedking153 жыл бұрын
Haha yessir WELCOME!!! and Thank you brotha🙏🤙❤
@DriverModJess3 жыл бұрын
Glad to see the lift is finally working. I’d hate to swap a car on the ground.
@Thecrookedking153 жыл бұрын
Gah its the worst😒im spoiled now with this lift lol🤘🏻❤
@jeremyjames26063 жыл бұрын
I did it on jack stands wasn’t hard at all.
@danfrancis72583 жыл бұрын
That’s what’s up bro good looking out on showing how to do it. Btw happy New Years!
@Thecrookedking153 жыл бұрын
Happy New Years bro!!!! lol glad you enjoyed it, Thank you so much🙏❤ all love always
@JoshDucote Жыл бұрын
Hey man i was wondering what was the total cost of this conversion? Thanks!
@milliondollaboiibsb49273 жыл бұрын
Love the channel fam u and myke are my inspiration with this car shit my guy blessings your way hope ta drive wit y'all one day
@Thecrookedking153 жыл бұрын
Thank you brother🙏🤙your support keeps us going , appreciate you, much love💪 ❤
@Jacob_A13 жыл бұрын
Those ratchet wrenches are amazing we got a set too
@Thecrookedking153 жыл бұрын
RIGHT?!? lol hell yea Love them💯💪
@johncorrea240 Жыл бұрын
Do you know when swapping a 350Z HR from Auto to manual is there a way to turn off the service engine light because mine popped up I did not swap the ECU to Emmanuel one I have a manual ECU but I have not plugged it in do you think plugging in the manual one will turn it off
@707_B.3 жыл бұрын
Hell yeah the Guru at work 💪🏽 Man I need to bring my Q50 down so she can get some love 🙌🏽 an bring yah some work 💯
@Thecrookedking153 жыл бұрын
Come on down, would love to meet you as well, show you the shop etc, much love brother!! Appreciate you❤
@707_B.3 жыл бұрын
@@Thecrookedking15 Bruhhh hell yeah thank you for putting out the content im definitely going to have to come though an kick it tuff 🤙🏽
@victoriaphipps53402 жыл бұрын
What is the man time for this? Is this like a 2 day project or can it be knocked out in one day
@theyhatedanny22823 жыл бұрын
I don’t even got a z and I watched the whole video 😂
@Thecrookedking153 жыл бұрын
😭😭❤🙏🙏🙏🙏🥰Appreciate you So much man Thank you🤙 All love man
@theoterei75083 жыл бұрын
Oh man getting the old automatic pilot bearing out is a pain!.. when you don't have the right tools 😂
@Thecrookedking153 жыл бұрын
Bruh seriously, even with the right tools, still fights 🤦♂️
@theoterei75083 жыл бұрын
True 😂 bloody pilot bearings
@thatduude28353 жыл бұрын
In doing a manual swap on my g37 . Would i be better off using the ecu and remove NATS, or buy an engine harness for manual and require the whole thing ??
@Thecrookedking153 жыл бұрын
G37 is different for me tbh, I think you could use the ecu and jump the "park" switch to allow it to start like how the z was jumped terminals by the battery, I am not certain tho, havent done the g37
@alexisnieves7803 жыл бұрын
no you dont need swap the ecu you can use your
@adamfakhouri9088 Жыл бұрын
Can this guide be used for the 2008 350z. From factory the 2007 and up have a JK41B 6 speed.
@brianvilla54643 жыл бұрын
U think u can make a list of every thing we need for the swap Ik u laid it all out in the video a list would be helpful tho thxxx
@Thecrookedking153 жыл бұрын
DONE!!! all love brother THANK YOU THANK YOU🤙🔥 Check in the description of the Video👊🏻
@5zu-der33 жыл бұрын
Finally swapping to manual😂
@Thecrookedking153 жыл бұрын
😈💯yessss!!!
@medicali83183 жыл бұрын
About time to get ride of that there is no feeling of shifting gears and being in control of your car its a feeling only so few know keep doing ya thing and I will hit you up to do some work on my mustang just don't tell my wife lol I have a feeling with your info and mikes and mine we can make my mustang one of the fast in my country 😉
@Thecrookedking153 жыл бұрын
Haha for sure man, Thank you so much!!! Keep me up on the progress!! all love brother
@medicali83183 жыл бұрын
Yea looks like ya are good guy and hella fun to be around the next time ya buring tries let me know i would love to stop by and check out your guys shop if thats even a option
@bobpinter33942 жыл бұрын
what about replacement of the automatic harness to a manual harness? Getting check engine light.....
@bobpinter33942 жыл бұрын
"wiring"
@exige36043 жыл бұрын
Hey Crooked Crown...I have a 2004 Zzz with a VQ35 DE automatic. Where can I source these parts to do the conversion? After driving with the automatic, get kind of boring...even though in LA...heheh. Are you in California? There are several videos on KZbin with this conversion, your video, was easy to watch....step by step! Like to hear back, your thoughts Sincerely..thanks! New subscriber 🏎
@Thecrookedking153 жыл бұрын
WELCOME my brother and thank you🙏🤙 Im actually from southern california, Valencia actually but located in Nor cal in fairfield ca now. I sourced a lot of my parts just from pick and pulls and yards with nissan/infinity. ebay is also good for getting parts because they can ship to you from anywhere in the country. Hope that helps, hit me on my dm on IG if you need any other help. all love
@youarethealgorithm3 жыл бұрын
How much should this cost? I want to swap my M35 transmission.
@dynastycrew8242 жыл бұрын
Don't know if you'll respond but is this the same process for a g35 like all the same parts you explained in the start of the video and where all the bolts are mounted and coolant lines
@Thecrookedking152 жыл бұрын
Yessir. 🤙🏼I haven’t found anything really different except if it’s a sedan with a foot brake ebrake you’ll have to remove it for the clutch pedal. If you got questions dm me on ig @the_crooked_king. I try to respond all the time. Much love man
@aeok181093 жыл бұрын
Great video. It's that the csc delete kit?
@Thecrookedking153 жыл бұрын
Thank you!!!
@kurtdogg86853 жыл бұрын
Mean vid bro good work
@Thecrookedking153 жыл бұрын
🙏🙏👊🏻thanks my dude
@kaseyvaughn59632 жыл бұрын
Clutch disc is a top hat. Put the top hat on the engine
@marklengal9990 Жыл бұрын
Will this work on a G35? I assume it will, but I had a shop tell me I needed the motor and trans combo and ECM. Not sure why I needed a motor to match the manual transmission
@Thecrookedking15 Жыл бұрын
Definitely will and no motor needed. I don’t understand that either lol just the transmission and manual stuff💪🏼
@aldog5043 жыл бұрын
Great vid, very detail 🔥🔥
@Thecrookedking153 жыл бұрын
🙏🙏🙏❤ thank you!!!
@alx99502 жыл бұрын
If i was looking to swap my transmission do you think i should do it myself or have it done somewhere and if so should I go to some sort of specialist or can almost anywhere do this
@user-qc5te9wk1s3 жыл бұрын
I have been looking at a z for a while I rlly want a manual but I could easily get a automatic z for lower miles and cheaper price I am in high school love to learn and I am thinking about getting a automatic and maybe doing a manual swap u think I could do it by myself? I think I could probably but not sure sense I have never done it only think is is I don’t have a car lift
@phreaktor3 жыл бұрын
Aaron why is that slave cylinder braided line so short compared to all the ones I’m seeing on ebay? Thanks -T
@Thecrookedking153 жыл бұрын
so there is a hard line factory that runs from the master down under the driver wheel well cover and to the trans area on manual g35/manual 350z, the customer bought that hard line and then we just put an upgraded slave cylinder line from the hard line to the slave. If you get the one from ebay or amazon or something like that, the long braided line cuts out the need for the hard line and goes directly from the master to the slave🤙
@phreaktor3 жыл бұрын
@@Thecrookedking15 Thanks I figured this out after more research.
@arthurocastro29203 жыл бұрын
Great content Aaron
@Thecrookedking153 жыл бұрын
Thank you brother🙏🤙
@carsten-qr6xt Жыл бұрын
Thanks for you work! My 18yr old son and I are completing a swap on his 08 350z and are at the crank/ no start stage. Wondering if it's essential to swap the ecu to manual (it's currently still auto) and what other wiring we may have missed. Thanks!
@Thecrookedking15 Жыл бұрын
Hey I’m so sorry to just be getting to this man!! THANK YOU THANK YOU so much. And no it’s not necessary for you to swap. And auto works as long as you jump the wiring like in the part 2 video💪🏼🤙🏼 hope that helps man. Can’t wait to hear about it being done. Much love always❤️🤙🏼
@elcopeton1978 Жыл бұрын
@carsten-qr6xt Did you ever finish that swap on your 2008 im trying to do my 2009 350z in the next couple weeks
@carsten-qr6xt Жыл бұрын
Got it done! Struggled with the wiring a bit but everything else went smoothly.
@3TITTYZ8 ай бұрын
@@carsten-qr6xt what did you have to wire? I want to get into this swap but soon as i hear wiring i get intimidated lol, how hard was the job?
@carsten-qr6xt8 ай бұрын
The only wiring is splicing into the wire that controls the park neutral switch so that the computer allows the car to start. The mistake we made was cutting the wire rather than splicing into it as the video demonstrates.
@jimenezjr11143 жыл бұрын
Can you list all the manual swap equipment cause I wanna do the same thing plz
@Thecrookedking153 жыл бұрын
I laid it out in the video but Ive gotten that question more than once so that might need to happen....
@phreaktor3 жыл бұрын
I tallied up all the parts on eBay new and used and it comes out to $1600 with tax and shipping for everything here except the clutch pedal which I’m looking for now. That’s with a new trans.
@CoreyJ923 жыл бұрын
So the vq in the 09-15 maxima can be manual swapped, no one has a video on KZbin doing the build would love to see you pull it off an help me do it on my own maxima
@Mmmmmmmm-mm2zt2 жыл бұрын
Would it cause grinding issues if the automatic bushing wasn’t removed ?
@staytrucivic37103 жыл бұрын
Hell yea man good for that kid!!
@Thecrookedking153 жыл бұрын
❤❤❤
@AcMus1c3 жыл бұрын
Pedal Assembly next please! im having trouble with my brake pedal lol
@Thecrookedking153 жыл бұрын
Its in part 2, DROPPING TOMORROW at 9am🔥👊🏻
@Thecrookedking153 жыл бұрын
Hoping Part 2 Helped you with your pedal!!! All love man🤙💪
@asunainori64752 жыл бұрын
Question.. so ive heard that manual from factory is better than tranny swapping it. Is the true or does it just depend who does it for you? cause I have a 350z but i want it manual
@lonewoofv3 жыл бұрын
after swapping the trans did you get the U1000 code? im having that problem, i bought the car swapped so idk if the ecu was programed
@Thecrookedking153 жыл бұрын
Yesss that code is a communication code since the ecu was programmed for the swap
@robertcortinaz7539 Жыл бұрын
What’s the charge for something like this?? Very interested
@Thecrookedking15 Жыл бұрын
Dm me on INSTAGRAM and we can figure it out💪🏼🤙🏼
@DeJuvn3 жыл бұрын
I have an auto Im not swapping my transmission yet but I am putting a new de in and I noticed that there was no pilot bushing?!?! Idk what to do im stuck lol. No one talks about auto cars🥲
@Thecrookedking153 жыл бұрын
No pilot?!? there isnt a big aluminum one pressed into the end of the crank?
@trevormorgan65383 жыл бұрын
So is changing out the drive shaft neccessary I've watched some other videos and they didnt say anything about it?
@Thecrookedking153 жыл бұрын
They have different lengths 🤙
@ryovaIorant3 жыл бұрын
I got an AT trans light after my conversion, is it because the car is not able to sense the automatic gearbox? what should I do about it
@aristobaldosocrates19813 жыл бұрын
Hello, I have an 06 350Z, which is VQ35DE 5AT, 280hp, I'm going to a single turbo on it, with Transgo kit, I got few questions and since I live in Brazil is veryvery very hard to see people who understand of this car, even on forums like my350z My biggest problem is the transmission, I was looking for another transmission to put in, but in Brazil we pay 100% import tax over the product + shipping price, so if 2k usd for the cd009 + 500 shipping I pay 2500 + 2500 usd. Usually people wage here is 120 to 200 a month, of course I'm not like those peoples but I'm not rich if I put my money in USD's So basically I have 2 questions to know where should I run: 1- Any other transmission that I could find to swap even if I need adapt few things? Like Nissan Frontier 6MT? Which year could be good? Or any other? 2- How much power can the 350z 2006 5AT transmission handle with Transgo? I was looking for 500whp or something close to it, you think the transmission with transgo will handle that? Or should I jump for a swap ( but there is not even one 350z transmission to sale in whole Brazil ) I'm sorry for taking your time but I had nobody else to ask those things...
@philspaghet2 жыл бұрын
I'm not the creator but see if you can get a T56 or LS based manual transmission. There are a lot of swap kits for putting those into Zs and some manual Z drivers swap those in because they are stronger than the CD00A in the 350z.
@MistahPokeymon3 жыл бұрын
Hey man would love a link to your IG in your video descriptions im sure we 350Z noobies all could use some advice/help
@Thecrookedking153 жыл бұрын
Done! Thanks for the suggestion brotha💪
@tylerj71073 жыл бұрын
Do u know where he got all the parts from because there’s a lot of parts and I can’t find all of them as of now been looking into it for months
@iTzDeXx_Dc53 жыл бұрын
Never realized how many parts go into a manual transmission 🤯
@Thecrookedking153 жыл бұрын
Right?!? lol 🤦♂️more than I thought initially too lol
@richardibanez48563 жыл бұрын
Very helpful video
@Thecrookedking153 жыл бұрын
Glad to hear that!!!!! If you have questions you can def hit me up on here or my Instagram and I try to get back to everyone !!! 🙏🤙💪
@Mohammed-lw7bm2 жыл бұрын
can you explain more of why you changed the eco?
@brokeblasian3 жыл бұрын
Are you able to do this for my car? Just started buying parts for my manual swap but wanted to find someone who could do it properly.
@Thecrookedking153 жыл бұрын
I can, and would love to help you!! Let me figure out shop stuff first to make sure there is space and availability to do it and Ill get back to you!! Much love man!!
@brokeblasian3 жыл бұрын
@@Thecrookedking15 sounds good man ! It’s no rush right now I haven’t been able to get my hands on a cd009 trans and I’m slowly stacking up on the other parts.
@rolandomota22893 жыл бұрын
Ok so my car is at the mechanic right now and it needs a new engine. Can an engine from an auto be used with my manual transmission and be made to work?
@Thecrookedking153 жыл бұрын
Yessir. Same engine. Just change the pilot bearing to the manual trans pilot bearing and everything else works normally
@rolandomota22893 жыл бұрын
@@Thecrookedking15 mine is an 06 manual. I think I read on the forums that its not the same for the 06 manual rev up.
@sirjankalot19632 жыл бұрын
Where you located, i want to manual swap my 2006 g35
@OTFOGZ332 жыл бұрын
Aaron let me get that auto shifter till I go manual hahahaha plz I'll pay shipping
@Thecrookedking152 жыл бұрын
lol I dont have it anymore man sorry......
@OTFOGZ332 жыл бұрын
@@Thecrookedking15 😢 lol it's Kool love ur videos man
@v_az_qu_ez50272 жыл бұрын
Hey so if I changed out the ecu and engine harness for an MT harness will that allow me to have the reverse lights and clutch safety switch as if it was stock? Or do I still have to wire stuff.
@v_az_qu_ez50272 жыл бұрын
Also does flashing the ecu help with the codes and the check engine light so that it can pass inspection? Ik here in PA if they even the light they fail inspection
@anthonywimberly45673 жыл бұрын
Did you have to swap out the pilot bushing ? Or did you run the auto one ?
@Thecrookedking153 жыл бұрын
Yessir you HAVE to switch the pilot bushing🙏🤙
@anthonywimberly45673 жыл бұрын
@@Thecrookedking15 how did you go about the neutral safety switch?
@mauriciogutierrez79973 жыл бұрын
@crooked crown motorsport I have a question can I use the ECU out of any Manuel z
@Thecrookedking153 жыл бұрын
Yessir just need the nats flashed off it, so the immobilizer doesnt stop the car from starting🤙
@ardellreeves14813 жыл бұрын
What type of grease do you use on pilot bearings/input shaft/throw bearing
@Thecrookedking153 жыл бұрын
High temp bearing grease💪
@fruitfulfigtree21953 жыл бұрын
When Swapping Do You Need To Swap Ecu From That Engine To A Car That Came With Manual ??
@seangraffis73613 жыл бұрын
No you don’t. There’s a wire you need to splice on the IPDM that will trick the car into thinking it’s always in park to start. I’ve done this to my Z and never had any problems. This is the link on how to wire it my350z.com/forum/engine-drivetrain-and-forced-induction-diy/552038-5at-to-6mt-swap-info-diy-guide-thread.html
@louiscanas10826 ай бұрын
can someone please tell me what grease or lubrication he was using
@pav81053 жыл бұрын
Is the clutch hard line different on right hand drive 350z?(uk)
@Thecrookedking153 жыл бұрын
I believe It is but dont have a definite answer for you, ill have to check that out🤙
@Toysourboy2 жыл бұрын
People keep telling me to just trade the car in or buy a new one. I ain’t giving up that easily.
@marlonlegra367 Жыл бұрын
Can I use the ECU from un g35 is the same year ?
@realmistahwong3 жыл бұрын
Hexa Garage can do nats delete? How do I get in touch
@Thecrookedking153 жыл бұрын
Hexa motorsports on Instagram and talk to Jorge or Jake, rad dudes and super knowledgeable💪 They are located in santa rosa👊🏻
@cnetplus2 ай бұрын
can I get someone to take off NATS from nissan teana j31 ecu please.
@ThatBustedVQ3 жыл бұрын
he should swap in a manual diff as well autos use 3.3 manuals use a 3.5 or he could throw in a 370 3.7 diff
@Conker9993 жыл бұрын
I'm swapping and manual trans from an 08 to a 07 Z are the engine harnesses different?
@Thecrookedking153 жыл бұрын
Nope should be the same🤙
@Conker9993 жыл бұрын
@@Thecrookedking15 is a manual harness a plug and play onto an auto engine? Sorry this is my first time im going to do something like this so wanna make sure I have the right parts
@Thecrookedking153 жыл бұрын
@@Conker999 the engine doesnt matter as long as the 02 sensor plugs are the same, however the manual and auto harness are different plugs for the transmission, the engine will all plug in but when you go to plug in trans if you have manual and have auto harness or vice versa, the transmission sensors wont plug in and you wont have some functions of the car, like reverse lights etc
@Conker9993 жыл бұрын
@@Thecrookedking15 okay perfect that I have the manual harness then I should be straight. I'm going to replace trans internal slave cylinder and upgrade the clutch while I'm doing it 👌 thank I appreciate you
@phreaktor3 жыл бұрын
@@Thecrookedking15 So you need a complete wiring harness from a manual as well? Sorry for all the questions.
@6speed873 жыл бұрын
how much the swapped cost this video is 🔥🔥🔥
@Thecrookedking153 жыл бұрын
Thank you man!!❤ about 1500 In parts and I charge 1100 for Labor 🤙
@funnycovers55433 жыл бұрын
@@Thecrookedking15 $1500 in parts!! My list tallied up to $6900?!?! :(
@phreaktor3 жыл бұрын
@@funnycovers5543 what is that all new OEM parts? I’m at 1600 minus the clutch pedal and hardlines.
@EduardoZacarias-ox7go3 ай бұрын
My clutch will not pop all the way out
@slimjim88562 жыл бұрын
how much did it cost him in total?
@drdingleberri16432 жыл бұрын
Man I can’t find anyone in socal to do a swap for me ! No shops want to do it lol
@VQDNZ2 жыл бұрын
There’s a few in socal.. i can give to their instagrams. Im Gonna end up doing it myself
@drdingleberri16432 жыл бұрын
@@VQDNZ ya bro if you can I appreciate it
@gerodriguez19932 жыл бұрын
How can i manual swap with a vhr trans on a g35
@sirjankalot19632 жыл бұрын
How much did you charge him
@BaejiNom3 жыл бұрын
What was that gustavos video?
@chispyr186 Жыл бұрын
how much was it in total ?
@pav81053 жыл бұрын
Do I need to change the differential or can I keep that auto?
@Thecrookedking153 жыл бұрын
You can keep the auto, that doesnt change❤
@fernandosalazar4663 жыл бұрын
How much was the total cost of the swap ?
@Thecrookedking153 жыл бұрын
About 1500 for all the parts and I charge 1100 for the swap🤙
@issawrx77723 жыл бұрын
Anyone know where I could get a manual crossmember?
@Thecrookedking153 жыл бұрын
I have one if you need it
@stefmcquack19343 жыл бұрын
20:04 that's what she said
@Thecrookedking153 жыл бұрын
😆🤣🤣🤣🤣😆💯
@diegofeik1306 Жыл бұрын
I just found out I was doing everything wrong lol
@geremiavelasquez5933 Жыл бұрын
Thank you daddy
@2coldproductions8963 жыл бұрын
The into hahahaha
@Thecrookedking153 жыл бұрын
lol❤
@exvey42843 жыл бұрын
Is that Mykes z
@Thecrookedking153 жыл бұрын
No, Gustavos 350z, the dude mike transformed for him and surprised him with❤🤙
@georgegirbis23013 жыл бұрын
Can i take my 350z to u so u can do. The same job on mine??
@Thecrookedking153 жыл бұрын
Yessir, Bring it on down!!! 🙏🤘🏻
@georgegirbis23013 жыл бұрын
@@Thecrookedking15 where u guys located
@georgegirbis23013 жыл бұрын
How much is it ? I’ll bring all parts with me
@Thecrookedking153 жыл бұрын
@@georgegirbis2301 In fairfield Ca
@Thecrookedking153 жыл бұрын
@@georgegirbis2301 I charge $950💪🤙
@Tarzan5103 жыл бұрын
🔥🔥
@Thecrookedking153 жыл бұрын
❤👊🏻🤙
@pharaoh_Z323 жыл бұрын
Zlife💯💯💯
@Thecrookedking153 жыл бұрын
Yessir, definitely about THAT life🔥🔥🔥💯💯 and so are you!! Keep me up when its done, shes looking 👌👌👌 much love