Nissan Airbag Diagnostics

In this video I show you how to diagnose Nissan Airbag Fault B1065. I show you how to read the fault code, how to analyze the airbag wiring diagram, how to simulate the airbag and how to check it with scan tool.
You may watch the following video too:
Seat Belt Pre-Tensioner Diagnostics | How to Simulate Seat Belt Pretensioner:
• Seat Belt Pre-Tensione...
Airbag Diagnostics | How to Simulate Airbag | How to Bypass Airbag:
• Airbag Diagnostics | H...
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
For supporting us and accessing more videos please join the channel:
www.youtube.com/@AutomotiveDi...
#airbags #airbag #nissan #howto #warninglight
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

[@AutomotiveDiagnosis]

How Immobilizer Works | Transponder Chip, Immobilizer Components, How to Bypass Immobilizer kzbin.info/www/bejne/oomppaeJmtWbb5Y

[@amarabdelli487]

Thanks for sharing

[@AutomotiveDiagnosis]

👍👍👍👍

[@HariBuan]

Quick and useful

[@AutomotiveDiagnosis]

👍👍

[@user-rc2yw1bc9f]

Good video

[@AutomotiveDiagnosis]

Thanks

[@Dean-ob7fg]

Thanks man

[@AutomotiveDiagnosis]

Thanks for watching

[@user-ud3se1dk3v]

Great video brother. Question: If you connect the dummy resistor and it still says open circuit, does that mean it is bad wirring? How do you tell if it is bad wirring or airbag module itself?

[@AutomotiveDiagnosis]

Hi there. It could be either wiring or airbag module, so the next step in that case is to check the wiring between airbag and airbag control module, is wiring is bad, get it repaired, if wiring is ok, you have a bad module.

[@phutran5698]

hi can you share a website of wiring diagrams are you using?thanks

[@seamannn577]

All Nissan car and all airbag are 2.2 ohm ? Thanks

[@AutomotiveDiagnosis]

It’s the same for many many cars not only Nissan. For airbags and seat belt pretensioners

[@seamannn577]

Many thanks

[@AutomotiveDiagnosis]

@@seamannn577 You're welcome my friend

[@mxninja9668]

Sir, why i have problem to buy membership, for your youtube

[@AutomotiveDiagnosis]

Hi my friend. Please try it again from the Join button on channel page, there shouldn’t be any problems.

[@mxninja9668]

@@AutomotiveDiagnosis i have try again, and it cannot success, i have this statement "Couldn't complete your purchase. Check that you have the correct country selected in your Play account"

[@mxninja9668]

Have any solution for this problem

[@AutomotiveDiagnosis]

I think you need to check the YouRube setting to select the country properly.