Nissan Almera Tino bi xenon projectors installation with SMD Angel eyes

Transform your family car into a smooth luxury eye-catcher!
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.com/products/mini...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:12 heat the headlight in the carton box for about 16 minutes and open it with a flat screwdriver.
0:49 For the Mini AE shrouds, you have to undo the plastic cover from the 80mm SMD angel eye and place it in the included plastic cover made for the Mini AE shroud.
2:53 Mount the shroud on the Mini H1 bi-xenon projector with the included screws.
-- Do touch the chrome parts and lenses with gloves only!! --
3:25 Press the tail of the projector (with the smallest rubber ring on it) trough the H7 reflector and center it with the included H7 metal centric rings, fasten it with the screw nut!
4:07 Place the glass back on the housing and put it back in the carton box for about 16 minutes.
4:27 Clamp the glass on the housing for extra strong connection of the butyl sealant. Let it cool down for a few minutes now.
5:14 Place the bulb holder, all other parts behind and mount the bi-xenon wires to the high beam with our included H7 splitters.
-- Please note: the angel eyes may only be used WITH (white) driver wires, otherwise the angel eye can burn --
7:19 Final view in the car. The headlights will be polished as well. After we get photos of that, we will post them on our Facebook page!
𝗜𝗻 𝘁𝗵𝗶𝘀 𝘃𝗶𝗱𝗲𝗼 𝘄𝗲'𝘃𝗲 𝘂𝘀𝗲𝗱:
• Aharon Speedstart ballasts canbus
• Mini AE shrouds
• XB35 5500K bulbs
• H7 high beam splitters
• T10 position lights 5000K
• SMD 80 mm Angel eyes 5000K (www.retrofitlab.com/nl/access...)
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Nissan Almera Tino (1999 - 2006)
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retrofitlab/
Instagram: / retrofitlab.com_official
Our website: www.retrofitlab.com/
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

[@11bhagwats]

Awesome Video like always. I was wondering if it is possible to install after market projectors that auto level?

[@123_bike]

like a lot of your videos, congratulations, more could have cleaned the lens before mounting the lighthouse ...

[@jandepandaman3113]

Nice! But ffs. Polish those headlights. Now this complete retrofit is not near as optimal as it should be

[@masmas5191]

Hallo I need for installer for chrysler T&C hid

[@zagonielod]

Could you and would you make a video of retrofitting some lenses in ford focus mk2 headligts?...

[@zagonielod]

+Retrofitlab And how much would that cost my pockets? :)

[@stewart2073]

Nice really good video can you make Honda CR-V headlights

[@Retrofitlab]

Thanks, sorry, not in the planning at the moment...

[@SY-ml5nl]

Hi. How do you know its put in level? What if the xenon points up in the sky or oncoming traffic etc. Thanks

[@Retrofitlab]

Best is to face your car in front of a wall and align the projectors before closing the headlights :)

[@eyadoss]

Hi, great work Do you add new silicon to the frame while closing? or keeping the old one?

[@Retrofitlab]

No you can reuse the sealing. :)

[@ondrasalma669]

Nice really good video can you make audi A3 8p sportback 2008 please thank you bix xenon which to install there ?

[@Retrofitlab]

Perhaps in the future :) stay tuned to our channel..

[@ondrasalma669]

@@Retrofitlab ok thank you

[@anibalonedae]

hi, how much to instal a bixenon in a honda civic 2007 european highlights? thanks

[@yucelyilmaz2998]

Retrofitlab Renault fluence Can you practice

[@user-tw6ds8si4r]

ну поставили ксенон а как насчет регулировки света...?

[@HJMoesjes]

Ik ken dit niet vinden op jullie site

[@Retrofitlab]

Via deze link kom je bij de benodigde producten uit: retrofitlab.com/products/mini-h1-twin-kit-bi-xenon-projector-kit?variant=40322601156760

[@ninnivespucci6587]

Good,is it possible to do it also on qashqai j11?

[@Retrofitlab]

Perhaps :) What year?

[@ninnivespucci6587]

@@Retrofitlab hello thanks for the reply;) qashqai year 2017 you could make the video, congratulations for the channel

[@Retrofitlab]

@@ninnivespucci6587 , please send us an e-mail :) [e-mail]

[@afrinkhanam676]

hello I neet to be install in chvorlet beat car share cotation

[@soty5742]

👍

[@soty5742]

Bur it is Very Costly 👉

[@ronniecortegana8581]

Hi, the projectors you install are china made¿ If it is, I want to know if is possible to change the shroud. I have aftermarket projectors with angel eyes in the shroud, but the color of the eyes are 8000k, and I would like to have a 5000k ones. thanks for your answer :)

[@ronniecortegana8581]

Retrofitlab thanks! all projectors have removable shroud? or it depends on the brand? mine are made in china

[@ronniecortegana8581]

Retrofitlab thanks! :)

[@jonisembang8658]

Ronnie untuk mobil lnnova tahun2012

[@vince6362]

couldnt you just de-pin the plugs instead of cutting the shroud? it's not hard.

[@Retrofitlab]

yes,that would also be a option! :)

[@hamzajk1]

clean it before putting it to gather