Nissan Altima Get's New Mufflers

Boy I tell ya, this week has been really busy at the shop but all of the jobs have been just your run of the mill plain ol' plain ol' boring jobs. Like this one for example. hangin' a couple of mufflers on a 2013 Nissan Altima. Not to exciting. I can't complain though, the days have been going pretty smooth.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

[@SouthMainAuto]

*Mayhew Pro 31959 Pneumatic Sheet Metal Trimmer* : amzn.to/45sBCvV *AIRCAT Pneumatic Tools .401" Shank Super Duty Air Hammer* : amzn.to/3DRsFAP

[@williamlewis7846]

Gives you mind a break once in a while. Savor it, the next one may be the nightmare. LOL

[@WildXNatur]

What is the worst stuck axel nut you have encountered. All four on my 2011 Jeep Cherokee look like they are welded on with no threads present. I foresee replacing the entire axel shaft after they are cut off. Should I need that type of work in the future.

[@robbrobb2161]

Thanks for the part number on the trimmer. I have added it to my Cadre of tools. I always learn something new here. I'm no pro. Thanks for taking the time!

[@mod_incllc3235]

How about "Tool Time with Eric O.'? That sounds like a winner!

[@gpsguidedsimpson]

geeze thanks one of those bits came with my air hammer but had no idea what it was for typical man i didn’t read the instructions

[@Nmdixon-cu7vm]

However lame you think a video is, there’s someone learning something of value from it.

[@sewing1243]

If nothing else we all learned, or were reminded, to read and reread the part numbers and if a part doesn't look right go back and check it again.

[@jimwheeler6094]

That's true as I had no idea that you can't cut metal that doesn't oxidize with a cutting torch. If there ever comes a day when I cut metal with a cutting torch I'll know that.

[@richardracette6162]

I can always learn something from Mr. O if for no other reason than he does a complete professional job with good attention to details.

[@ElevenKnights2600]

This. Had no idea there was a metal cutting bit for air hammers, though seeing it in use it makes perfect sense.

[@duanebuck193]

Sometimes it's the lame ones that keep the bills paid - regardless we still enjoy watching them.

[@REDBIRD-95]

Eric, your "lamest" videos are way better than most other people's "best videos" I'll keep watching your videos, thank you very much😁👍 Have a great weekend, my friend.

[@t-bear1863]

No doubt.

[@kjbunnyboiler]

Evening Eric, no such thing as mundane at SMA🤣🤣

[@elcheapo5302]

Respect for not using clickbait or fake drama.

[@TheClampettmobile]

No matter how "boring" you think your video might be; it's qa whole lot better than ANYTHING on TV. Thanks for the tips and such.

[@SouthMainAuto]

Glad you enjoyed it!

[@thomasfletcher760]

Started off with Rory, Shawn , and Mike out doing trail repairs , and now Eric at SMA doing in shop repairs . Pretty darned good Saturday . Trail Mater for those who didn't know who Rory and crew were )

[@NOELTM]

Me too!

[@941Earl]

After fixing other peoples broken rides all week every week...I'm not here for the repair. I'm here for your comedy! You assure me that talking to myself while working doesn't make me weird.

[@RM.....]

if your not talking to yourself while working ,then something is wrong with you lol. Do it all the time ,keeps me semi sane

[@dans_Learning_Curve]

Just don't argue with yourself! 😂

[@markh.6687]

@@dans_Learning_Curve Don't lose the argument! I did, then I storm off and lock myself in the bedroom until I talk myself out. It's always kinda awkward afterwards....

[@dans_Learning_Curve]

@@markh.6687 LoL 🤣😆 *Great response!!*

[@martijn-vels]

There is no such thing as a lame South Main video 😂

[@davyarthurs]

Exactly. The car might be mundane/lame, but the video isn’t.

[@ImaDrummer55]

Eric, no matter if it's boring work to you, we always enjoy watching your work !! I think those Chrome Tips added at LEAST 5 HP per side !! I've followed you for years, and I just wish that I lived closer to you. I would definitely bring my car to you. You're the most honest mechanic I know of. You can always be trusted to do the right thing, and ensure that it is working properly before it leaves the shop. Enjoy your weather before the cold sets in. We will be watching to see what is next for you.

[@johnds6621]

don't worry Eric everything you do is interesting plus so many words of wisdom.

[@paulshanley4222]

Might be boring to some, but it pays the bills and makes me look forward to the trickier jobs. Keep up the good work Mr O.😊

[@scannerlanier471]

Was wondering why you cut the ends of the u-clamps with the torch. I didn't think they were that long. Pretty common repair, but still worth the watch.

[@jake-mv5oi]

Came here to ask the same question.

[@robstruction]

Thanks for clearing that up. I thought he was just roasting nuts!

[@JohnnyTalia]

At least I learned about a new air hammer bit. However, the exhaust systems here in Michigan usually end up looking like brown lace. A couple of good tugs and they're on the floor.

[@Mike_Engel]

Thanks for the video Eric... No matter how boring.. yours are still very informative

[@cal4625]

I always enjoy a visit to the SMA shop regardless of how lame the job. Thanks for posting.

[@Andy-ir1sj]

10 minutes of SMA goodness !💯

[@Joe6packAmerican]

I'll gladly give you a comment and a thumbs up even for the lamest video you can thank of just for what little payment it is for the help you give people. Thanks for all you do Eric O. Never a disappointment.

[@QBRX]

I did learn that because stainless doesn't oxidize it doesn't cut well using a torch. Very interesting.

[@amatod4]

My favorite KZbinr!!!!! This dude is the best!!!!

[@phillipwayneblanchard]

Thank you Eric! Might seem lame to you but when your neighbors car don't pass inspection and you are laying on the ground in your driveway trying to change it, you appreciate you!

[@ex90ranger30]

Lame-o videos are better than no-mo videos. :D I enjoyed it

[@robiecarmichael9958]

Boring or interesting labor fees are labor fees, and you gotta pay the bills. Your commentary is always worth the watch. Thanks for the videos

[@brentmcgillis]

Foraging a Pick-n-Pull 850kms away, I was struck by how many Nissan Altimas there were in the junk yard. Not as many as the all-time champion of the Car crusher Hyundais and Kias, if you own a newer Kia, you will NEVER run out of Junkyard salvage parts, ever. When you buy an Air-hammer, just remember: Go big. The panel ripper you used is good for all kinds of automotive destruction. Great channel, great content especially anything to do with a torch blasting metal all over the place like a Schwarzenegger movie. 👏

[@desotosky1372]

As a young man I grew up just North of Eric O fixing and driving old cars. As an old man I recall being able to do it all without a torch or 2 post lift. Surely not as easily. A hunk of log made a great safety stand. Thanks for the video.

[@garycurry4600]

Nothing wrong with “lame”. I live vicariously through these videos 😂❤

[@jamesgrubbs6496]

I appreciate your showing how to use a sheet metal trimmer. This was very good information.

[@ronaldbrosius7488]

Your still by far the best and youtube mechanic/technician. Everyone still likes watching anything you put out mechanical

[@kimberg759]

No such thing as a lame SMA video. Enjoy whatever content you give us! Did you get a new camera? Sure is a crisp clean video! Love from AZ ❤

[@yhird]

Eric, the mufflers look amazing. You do great work! Thanks for sharing.

[@Robalo-2660]

You just keep them coming Eric. I'm with you no matter what . If I could be there to hand you a wrench , I'd be by your side. Much love my brother. There are a lot of times you don't show the real struggle. We know, we've been there. Thank you for sharing your talent. I've learned a lot watching how you use a torch. You taught me not to be afraid of burning off frozen fasteners. I never used the cutting torch, now it's my best friend.

[@johno9163]

I find interest in every one of your videos Mr. O. I learn something new in each and every one of them!

[@mattn6368]

Your "lamest video yet" still taught me something; I didn't know those metal slitting attachments for the air hammer existed, and I just ordered one!

[@richardabner9420]

Eric, another great video and thank the lovely Mrs O for an assist.

[@NurseRobert]

Even your "mundane" videos are great!!

[@jlancaster7482]

The ‘lamest’ SMA video is still better content that most of what’s put out these days. We appreciate you Mr. O!

[@oldman9642]

Spent several hours today teaching my son to do a proper brake job using tips and products based on what I’ve seen in the videos presented by you (and Rainman) so please don’t quit doing these. Someone can learn something from every single video.

[@jesstreloar7706]

The diagnostics are fascinating, being exposed to the latest technology and all. Sometimes you just have to pay the bills.

[@localcrew]

There’s nothing lame about BIG NASTY! I played the theme music in my head and I know I’m not the only one.

[@JustHelpMeOuT5466]

It'ss not lame, just that air hammer bit you showed us is helpful. Thank you for your time and content.

[@SmittySmithsonite]

Good to see ya, brother! Been a bit. Working for someone else now, so time is severely limited these days. Glad you’re still at it. I’ve come to the realization that alcohol was the only thing keeping me sane enough to do what I was doing. As soon as I quit drinking, my coping mechanism was gone, so I had to make some changes in my life. All good so far, although I do miss my free time. We’ll see where this next chapter takes me. Keep on keepin’ on, brother. 👍👍 God bless you & the family.

[@mxaexm]

There is something enjoyable about watching this guy.

[@eskieguy9355]

I've never seen one of those pipe slitters before, so I learned something new today.

[@mariosaccoccio1688]

Thank you for turning the muffler clamps to the side, not straight down like my silly mechanic did. I tried to explain how if you hit some road debris, you could rip out your new exhaust! He's young...

[@donaldcary7259]

You got a wonderful attitude you’re a trooper😂

[@MikeBrown-ii3pt]

Dr. O., I'm sure that you know that those band clamps are also available for "lap joints". My first experience with band clamps was about 5 years ago doing a "cat back" exhaust on a friends truck. I wasn't too sure about them that first time but, when I was finished, I swore I'd never go back to the old U-bolt style and, with the exception of 1 "just to get by" exhaust, I haven't. Either way, even when you think a video that you post is boring and/or useless, there's always someone that learns something from it.

[@davidzelkowski9948]

The air hammer tool I use for outside pipes has a rounded spoon with a cutting edge on one side. The spoon has a sharp edge which allows it to hammer in between the two pipes and slit the outer one. I think it maybe easier to use them what you used. I enjoy all of your videos!

[@RJon2006]

No video of yours is lame. Best channel on KZbin. 🇺🇸🇺🇸🇺🇸

[@MrRunner]

Bruce, it ain't lame, it's life. This is the sort of thing DIYers do, so it is very relevant. TY

[@peterromano1911]

Love all your videos Eric. None of them are lame. Having repairs to do is a good thing no matter how lame the repair is !!! Eric, do you suggest 3k oil changes or 5k oil changes for NYS registered vehicles ??

[@Wayne-Jones]

None of your videos are lame Mr O, it’s nice to see a craftsman at work 👍

[@Rein_Ciarfella]

My new favorite tool, Eric’s air hammer! Almost as good as Big Nasty. I think we need special music just for that tool. 🔧👍

[@ronberry5316]

My lame job today was a radiator and water pump belt on an 08 kia for a friend's daughter. Sent her to the parts house 5 miles away to get the parts, I had both on the floor before she got back. Went back together even quicker. Easy hundred, then her dad took the wife and I out for pizza. I'm kinda liking lame jobs. Pays the bills and a free meal is hard to beat. Keep on rocking it Mr. O.

[@mikechiodetti4482]

Some days are like that. The tech tips are still there which make it helpful. Good one Mr. O.

[@handymandev03]

Who else wants to see Eric do some oil changes? I find you can always learn new things even from simple jobs.

[@joeacfalle2380]

As a DIY, I still learning…even your “short clips” are informative.

[@robertlacob8831]

Some very lame videos sometimes turn into disaster repairs! Knowledge is the key my brother!

[@65bugnut]

I enjoyed watching your alignment video that you made with the old Mustang. If you have another alignment job, I will definitely watch it.

[@GenuineParts]

I'd watch you watch paint dry Eric. Your Commentary alone would be worth it, but also I never changed a muffler before, let alone own a Nissan, but now I have an idea how to do it. I learned something!

[@kapekodbob]

When you have days that are not exciting , just get Missus O to come in and give us all a smile ! I like ya gloves !

[@bobtustin9342]

on of your old videos on equinox camshaft pos sensors saved me when I helped someone out you are the man. no lame in you thanks again you help us all

[@DIYDaveOK]

We will take whatever you are willing to make, Eric!! Always a treat!

[@obadiah7771]

I would watch brake jobs all day… your channel is the best!

[@johnware2735]

Even lame from SMA is still gold

[@patrickreynolds801]

Always amazes me that we as mechanics have repairs come in waves. Like not doing a clutch in a year then all of a sudden three in a row... always good videos

[@timkothavala6558]

The good part is that the Walker mufflers will rot away as soon as they get a whiff of salt and you will probably be replacing them soon. Thanks for the video.

[@timothymoore5762]

not a lame video when you add that bumping bass line towards the end....keep 'em coming daddio

[@amtraktraveler9118]

Watching your channel about 50 miles on the Thruway near Henrietta NY. On my 10 DOT break!

[@h.j.j9611]

Not lame, really. I have a 2015 Altima and it was a great tutorial. I would attempt a DIY when time comes to replace my mufflers. Thanks!

[@oliver_klozoff]

Eric, anything you post turns to gold. I think there's a good number of us who tune in and watch even the so-called lame videos just have a conversation with you and your wife. Watching a skilled professional at work is what keeps most of us here. Even if that skill is monotonous at times.

[@richardsimons3382]

We can always go for a good old south main auto 4 wheel brake job, non of your videos are ever boring in the rust belt

[@BABA-ws5eo]

That pipe cutter is a really slick attachment. I thought I've seen alot, but have never seen that. thanks for a great video!

[@nv1493]

The only lame part were the set screw exhaust tips 😁

[@Paul1958R]

Eric, It is another great video - thank you! I dont watch the videos for the mufflers. I watch them for you. SMA#1 Paul (in MA)

[@kevinosborn7973]

Thank you I have a 2013 Nissan Altima SV

[@fredflintstone8048]

It was the most exciting muffler replacement video I've seen all day. My favorite part was cutting down the bolts on the clamps with the blue saw.

[@mark8850]

We the Viewer's of The South Main Auto Channel don't care what kind of video you make Eric, as long as it is a video.

[@sreginkc]

Sorry for the lame comment. Just keep making videos. We love the channel!

[@bluesfreak1700]

The Steely Dan style music at 9:15 made it a great video! We like all your videos. The only thing missing was Mrs O.

[@RobertL78]

Have you seen the videos of people cleaning out the threads of a brand new oil filter with a rag before installing? It’s amazing the metal shavings you will get out of some that are being injected right into the “clean” oil right at startup after an oil change. I now run a rag through every filter I install .

[@glenharper3136]

Thanks for the video Eric.

[@emilbratten681]

Always a teaching moment no matter how lame it may seem.

[@scottr.4885]

In accordance with the handbook for BAE (Big Altima Energy), when the exhaust system becomes rusted, you are supposed to just let it fall off.

[@as3sxp]

Eric O. says lame, I immediately want to see what's up.

[@lvsqcsl]

You know, Eric, if I don't like your video I can always click off. I have been following you for 5 years and I am still watching; and I will continue to watch. Great video!

[@grahamcooper3399]

Thanks for the video, Eric! Not lame at all in my opinion! I always learn something from you and I'm glad you do these videos and bring along all the people!! Be well!

[@buntnik]

Not lame to me. Each car is different. Each repair is different. That cutting bit is a great tool for DIY. Very useful and won’t break the bank.

[@Hurtydwarf]

You might think its a lame video but by this point you're definitely a youtube personality that people watch for you, not necessarily the jobs you do. You're still a top tier mechanic that puts out extremely informational videos, but your personality pokes through on these simple jobs and its nice watching a master cruise through jobs like these.

[@OldManBadly]

I do enjoy your griping... your work can be a little boring when nothing interesting comes in the door. Don't worry, auction car season should be back soon and that will be a whole world of wierdness.

[@rogermacdearmid4380]

I don’t think it’s lame at all. It’s valuable information for someone that perhaps needs to change their own exhaust because they want to save some money, or they are trying to learn new skills. And let us not forget how entertaining you are. That’s a thing you know.

[@garyfillmore1440]

As a shade tree "mechanic" that uses a chisel and hacksaw to remove a muffler while lying on the ground on a tarp it isn't so lame. It makes me want to get a lift and an acetylene torch. Don't underestimate what some of us get out of your videos.

[@wallingj68]

It's fun to see an easy-peasy video every once in a while. Especially since that would have been a less than optimal car to take a nap in with the engine running in the wintertime.

[@williamkraft5574]

I don't think it was lame at all. It's a good refresher course for us regular Joe's on how to replace a muffler and add some fancy tips. Thank you for putting this and all your videos together for us to watch.

[@DaddyBeanDaddyBean]

Always good stuff from SMA. Keep it up!

[@jonminer9891]

Luckily, no video is lame with the master detective aboard! Thanks for sharing! See ya next time!

[@santaclause2875]

Eric, you ROCK, no matter how basic a repair job may be! We love them all!!!!

[@ensom]

might be a mundane repair but i had never heard of that air hammer bit before so still learned something useful!

[@LeewardStudios]

You pay the shipping I’ll be happy to send you my 91 Camry that needs a clutch and power steering rack. To paraphrase you, I need to find a friend with a lift! Lol. Just good to see you and Mrs. O getting through the week.

[@williamschmitz971]

I’d like to see a transmission flush/fill sometime on a gm front wheel drive. Do you believe it’s better to do this rather than just drain the pan and refill??

[@robertrichardson1133]

If you don't feel like filming the "lame stuff" take a break and relax. We will all be here waiting for the next exciting video.