nissan pathfinder frontier brake lights stay on wont turn off how to fix it with only 1 penny

nissan pathfinder frontier and others models 2000 20003 and other years common problem on nissan brake lights stay on they wont turn off quick fix how to repair it fix it with only one penny

[@peterloughman2466]

You don’t need to use the hook tool to push back peg, just push break with your hand and glue down penny. The penny was a great idea.

[@raphaelgarcia4809]

Just wanted to say thank you for this video! I was so surprised when I had the same problem and saw your video on how to fix it. I ended up finding a rubber piece from an old appliance that matched the hole on the brake pedal plate that hits the switch. It was just a pain to get at from an awkward angle from the floor but a super easy fix without spending anything. Can confirm this also works on Pathfinder models from 1997. Cheers from Australia!

[@JM-AUTO]

im glad you found a solution to the problem, and thanks for visiting my channel, also cheers from the United States of America to the Beautiful Australia.

[@ozman6525]

just got told my brake lights were on while I'm at work on my QX4 so I went to check and my battery is dead. I'm going to try this to fix my issue once I jump start it and get back home. Thanks.

[@JM-AUTO]

great and thanks for sharing.

[@Stix-hb1bk]

Hey partner. Thanks for the video. My brake light switch was directly behind the steering shaft and really difficult to reach. I was gonna use the 1/4” bolt as others had suggested but there was no way unless I removed the switch. Didn’t want to do that. So I went ahead and used a nickel because the other grommet seemed to be more of that thickness. I superglued it and wedged it in with some needle nose pliers and done. So it cost me a little more than you, but well worth it!

[@JM-AUTO]

im glad you did a great job, it definitely was more expensive repair than mine but worthty

[@JCatesKC]

Excellent! I think I'll be able to fix my cruise control with a penny tomorrow! You're my kind of mechanic! I could drive my 93 Pathfinder to Nicaragua if you were in my pit crew. Muchos Gracias Doctor.

[@JM-AUTO]

thanks for the beautiful comment I really appreciated and yes we can go to Nicaragua.

[@chrismeadows5948]

Thank you so much this worked out great. This thing was driving me crazy trying to figure it out hundred percent thank you

[@JM-AUTO]

Thank you for your beautiful comment. God bless you and your family

[@nukedim2276]

Good quality video presentation Amigo..! Thank you for sharing the knowledge.!

[@JM-AUTO]

thanks for your beautiful comment that motivates me to keep making more videos to share with others thanks and God bless you and your family

[@tonyinarizona4350]

Thank you for sharing this! I couldn't figure out why in the heck there were holes in the exact place that was needed to depress the switch. I must have lost the grommets or they disintegrated when I changed the brake booster on a 99 Qx4. I used panel trim fasteners that fit the holes perfectly with no glue.

[@JM-AUTO]

Im glad, and thanks for your time on my channel.

[@rudyLobo-vx2lx]

genius,with this video is fixed for free....thankzz big guy

[@JM-AUTO]

thank you apreciate it very much.

[@davidbailey681]

Thank you. This saved me a lot of time troubleshooting.

[@JM-AUTO]

thanks for coming to my channel and im glad you fixed the problem

[@emilyreisner2753]

So helpful! Thank you!

[@JM-AUTO]

thanks for coming to my channel Emily and stay bless.

[@b256002008]

I had the same issue with my 03 pathy i called an electric guy to fix it, I did disconnected the battery until the guy came and fixed it with peace of mettle. It was in 2016 or 17.

[@JM-AUTO]

im glad you fixed it and thanks for sharing.

[@louiepagsisihan1333]

Awesome brah!!!Thanks a lot,& godbless people like you!!!

[@JM-AUTO]

thank you and God bless you and your family as well

[@James-yl6zm]

If you do this to your switch, your brake light still come on when you push the pedal?

[@JM-AUTO]

Yes it is the same as if you would install a new one

[@bhutsellgmail]

Thanks a bunch for the video!!

[@JM-AUTO]

my pleasure, and I appreciate your time on the channel.

[@kramsdrawde8159]

Hey got to give it to you thats a inexpensive repair, other than the labor ... most likely it will last longer than buying the nissan factory part too.

[@JM-AUTO]

thanks for your comment, yes I have done some about 5 years ago and till this day they still working fine, the penny has not come off yet. God bless you and your family as well.

[@preparedscouter2357]

Thank you for video

[@JM-AUTO]

You are welcome and thanks for watching.

[@davidnoname6972]

But what is the switch next to it? That's the one I have shorted out

[@JM-AUTO]

That is the cruise control

[@qwaszxpolkmncvb]

Great emergency solution! I'm gonna use chewing gum or candy.

[@natayeholyfield9371]

Did this work? 😂

[@MrAgustinMarcos]

Thank you!!!!!!!!!!!!!

[@JM-AUTO]

thanks for visiting this channel.

[@gankstak]

good shit

[@solonjeaninekobza7506]

Me Too!

[@paulrivera781]

Hey hey bro is there a certain way you got to take that brake light switch off

[@JM-AUTO]

hi, just remove the nut you see on top. , it is very easy.