Brake lights dont turn off

  Рет қаралды 470,094

Mud monkey Repair

Mud monkey Repair

Күн бұрын

Пікірлер: 270
@adaaurigemma4168
@adaaurigemma4168 7 жыл бұрын
I called a mechanic shop he made it sound so complicated and gave me a price of $100.00 to fix said parts alone would cost $40.00, I am a 64 year old woman , looked at your video and I got a screw and nut and fixed it myself in 5 to 10 minutes. great easy to understand video. Thank you!
@Mudmonkeyrepair
@Mudmonkeyrepair 7 жыл бұрын
That is awesome to hear!!
@mylittlescienceproject
@mylittlescienceproject 6 жыл бұрын
Wish I would have known this before. I spent the 11 bucks for a switch
@nando.g8077
@nando.g8077 5 жыл бұрын
Ada Aurigemma wow, you watch KZbin videos yourself, or did a friend or daughter or son tell you about KZbin
@taowhid07
@taowhid07 5 жыл бұрын
Are you sure that is safe?
@angelsanes5775
@angelsanes5775 4 жыл бұрын
💪🏾
@mielsteele
@mielsteele 5 жыл бұрын
Señor Dominguez!!!! I have been struggling for 15 min trying to get the plug in!! You were the only video that mentioned TURNING ON THE CAR to make the brake pedal easier to depress!! This created the extra room I needed to insert the plug!! Thank you SO MUCH!! 👍😀
@Mudmonkeyrepair
@Mudmonkeyrepair 5 жыл бұрын
That's awesome
@TherealIcedee
@TherealIcedee 4 жыл бұрын
I've seen a lot of these videos about replacing the rubber stopper/ bumper but you said something that made a light go off in my head. You mentioned that your vehicle was ON. Nobody else said anything about your car or SUV being on. You get so much more play out of the brake when the car is on. Thanks Carlos!
@Eriqv1
@Eriqv1 2 ай бұрын
THANK YOU!!! 10 years later and this video is still helping people lol this was so helpful and my battery would have been dead by the morning if it wasn't for this video lol
@lupitaayala3690
@lupitaayala3690 7 жыл бұрын
Carlos I used your video a year ago to fix my son's car, today I watched again the video for my car. Thank you soo much!
@bethewholeu4532
@bethewholeu4532 6 жыл бұрын
Best tutorial on this issue that I found. I actually found the broken plastic brake sensor pad. On the floor of my car under the pedal. You saved me so much time and money, a BIG thank you!
@zaharishtonov8837
@zaharishtonov8837 2 жыл бұрын
Same exact discovery made here 😄 Thank goodness for videos like this one!
@zaharishtonov8837
@zaharishtonov8837 2 жыл бұрын
Thank you, sir, for the detailed troubleshooting on camera! I had my battery drained too and after recharging it and putting it back, I noticed the brake lights constantly on. I suspected the sensor switch right away and even inspected it, but had no idea there should be a pad installed. That explained the plastic debris that I found laying on my carpet under the pedals... I can't believe they were made out of plastic. I replaced the pad with a metal bolt and a nut. This thing is not coming off any soon! Thanks again for the help!
@ashleehurt7304
@ashleehurt7304 7 жыл бұрын
for anyone needing to know. He used a license plate fasteners kit [Dorman 785‑122]. Fixed my problem with the brake light staying on and my cruise control not working.
@JakeHussDrums
@JakeHussDrums 6 жыл бұрын
Ashlee Hurt thank you!
@darrinfaulkner8911
@darrinfaulkner8911 3 жыл бұрын
I replaced my brake booster today and went through a similar situation with my brake switch but ordered a new one today from Amazon for little to nothing.I got a cardboard and drawstring on the senor now but will be taking it off after seeing your video until my order comes,thanks a million...
@thomasedwards3428
@thomasedwards3428 3 жыл бұрын
I watch the video first, and later the next day had too run up town so put the cable's back onto battery , then took off too get groceries. On the way I stopped at the mechanics shop just too see what they would charge and he told me at least $300 too diagnosed the problem & he was saying it was in the wire harness, that it got burned and that's why it was staying on. I new he was just trying to make a buck. Anyways I left from there and went and got groceries and returned home. That evening my 9 year old grandson came over too visit and I sat down and we both watched your video together and I had him put the bolts in while I pushed the break's 😁. He only charge me $5 buck's LoL and I had the bolts in the shop. Thank you for having these kind of videos made , it really saved me Money. I see how these crook's at mechanics shops make there money. Thanks again 👍
@Jedi-For-Hire
@Jedi-For-Hire 4 жыл бұрын
Man this video was a godsend. Literally took me 5 minutes to fix after watching this video. Luckily my fiance is 5 foot nothing so I made her crawl under while I held the brake pedal. Thanks again man.
@rachaelsmith6770
@rachaelsmith6770 8 жыл бұрын
Thanks Carlos! I watch your clip this morning and fixed my brake light issue with some simple bits from the garage I had. Saved me a lot of time and money!
@stevex7479
@stevex7479 4 жыл бұрын
Helps a lot bro. Got the first sensor fix and the light was still on. Didn’t know there was a second sensor.
@NotMorganFreeman.
@NotMorganFreeman. 4 жыл бұрын
After watching your video this is what I did. I noticed that my broken stopper (2004 Hyundai Elantra) was as thick as 2 nickels, so I used 5 minute epoxy and epoxied 2 nickels together. Then, I waited an hour and cleaned up the spot where the old stopper was, and 5 minute epoxied the 2 nickels in place of the stopper. The pressure of the switch was enough to hold it in place. Thanks Carols!
@rumorswro8173
@rumorswro8173 4 жыл бұрын
Thank you Carlos! I have a 2004 Infiniti fx35. I came straight to your video when my issue started last night. I removed the battery cable and I saw a broken plastic screw on my floor inside the truck
@edwardferebeejr.5191
@edwardferebeejr.5191 4 жыл бұрын
Where can u get da parts from..
@spiritwomanwalking
@spiritwomanwalking 3 жыл бұрын
Thank You so much for explaining the process and showing how it's done up close enough to really see..how it is suppose to work. You Rock !
@GoogleUser-MrsC
@GoogleUser-MrsC 7 жыл бұрын
Thanks Carlos! You really made it easy for a girl like me who is "mechanically challenged". You ROCK! 👍👍
@Borderican
@Borderican 5 жыл бұрын
You got superb camera skills to give us this type of image!!! Much appreciated!
@MsSmooth90
@MsSmooth90 5 жыл бұрын
I've been dealing with this problem for months an was using sticks an pens to kept my light off.. your video helped my boyfriend just fix it in 10 mins! Thank you so much! Your awesome! Great explaining an video! Honest guy!!!👍🏽👍🏽👍🏽👍🏽
@sheldonshobbies
@sheldonshobbies 8 жыл бұрын
A big thanks to you for posting this video. It was very helpful in fixing my car that I was about to take to a mechanic. I saw the rubber pad laying on the floor but did not know what it was. Have a blessed day, life, eternity. KZbin is an awesome way to share info.
@1989moonbeam
@1989moonbeam 8 жыл бұрын
This was EXCELLENT.
@jdunaway65
@jdunaway65 8 жыл бұрын
Thanks for this, Carlos! I have a 2000 Nissan Maxima and had the same problem. Just like yours, there was a second switch (and mine was behind the steering column -- made me glad I have long, skinny fingers!) and that was the problem. I'm going to share this on facebook in case anyone else I know has the same problem!
@krystalyzaguirre1125
@krystalyzaguirre1125 5 жыл бұрын
Hello I don't know how often you get this but I have the same problem I have a 2000 Nissan Maxima did the same method fixed your problem my brake lights are stuck and they won't go off
@geniahaslar2575
@geniahaslar2575 8 жыл бұрын
NICE IDEA USING AUTO BODY TRIM SCREWS FOR A FIX ! I saw the pieces on my floorboard to my sensor pads but didn't know what they were at the time ! I sure do now & the trim screws will be a perfect fix. Silly parts store sold me a new switch but it is the brake switch pads, not the switch, that had disintegrated. My cruise control brake switch sensor pad went first , then my actual brake lights pad went. Same problem, brake lights were on constantly ! Lesson learned ,if you see little pieces of plastic on your floorboard & you didn't put them there it is probably important to find out where they came from So glad to get my cruise control back too !
@shirleypersinger3614
@shirleypersinger3614 2 жыл бұрын
Wow!!! Thanks to you my brake lights are off and working when pressed. Great video!!! Cost me nothing... you're the best!!!!!!
@423outlawz
@423outlawz 3 жыл бұрын
Oh wow man you saved me a bunch of money by switching to geico...thanks man keep doing what your doing saved me time and money
@princessbenjamin9330
@princessbenjamin9330 4 жыл бұрын
Thank you so much i was able to follow you through the whole video. Camera work was so good. No mechanic needed
@Gucci22Julio
@Gucci22Julio 4 жыл бұрын
I checked your video, and I was able to fix my Nissan Maxima in a very similar fashion. Thank you so much.
@olagoke84
@olagoke84 9 жыл бұрын
Thanks man. ..I had the same issue with my maxima and after watching your video I tried it and it worked. Thanks for saving me money.
@ForTheKingdom4Real
@ForTheKingdom4Real 5 жыл бұрын
What year was your maxima?
@mitsirrah4719
@mitsirrah4719 2 жыл бұрын
mine is a 2003 maxima but I think this process works for alot of different Nissan models
@RebeWill
@RebeWill 4 жыл бұрын
Thank you for showing exactly where to insert the bumper pad. I have watched several videos on Hyundai’s and not one has shown exactly where to put the part. Thanks again.
@Legendarykids305
@Legendarykids305 5 жыл бұрын
Thank you very much for this video I just did this to my 2007 infinity g35 Our mechanic told us bring it in and $200 😒 we watched your video,a quick drive to our local auto part store and 5 minutes later wallaaaaa job was done
@jaypadilla4919
@jaypadilla4919 9 жыл бұрын
Worked on Honda CRV 2001, helpful video I used a 1/4 20 bolt and nut works just as good. Thanks
@terrygilbertsen
@terrygilbertsen 2 жыл бұрын
Thanks to you. I saved hundreds from the mechanic. Awesome video.
@brianswaim8902
@brianswaim8902 4 жыл бұрын
Thanks so much! Just fixed this problem in less than 10 minutes on a Honda Civic '01. Much appreciated!
@mvpaint9018
@mvpaint9018 4 жыл бұрын
Thanks for the video I just used a spare bolt and nut out of my tool box to fix this problem and now people behind me know that I'm about to stop.
@keno.8478
@keno.8478 6 жыл бұрын
Awesome video!!! My Toyota truck's brake light did not want to turn off. I was able to replace my broken plastic factory piece with a small metal bolt to activate the brake light switch. Amount I paid $0.00. Thank you!!!
@letitiavaughan947
@letitiavaughan947 8 жыл бұрын
Thanks for being kind enough to share your knowledge!
@roygainey4317
@roygainey4317 2 жыл бұрын
Did not know it had two switches that's a big help I'm headed to the parts house now thank you
@jimmyveneo5964
@jimmyveneo5964 3 жыл бұрын
perfectly explained with the video bro. better than the one I watched earlier from the other guy. Thanks to your assistance as well.
@thor3399able
@thor3399able 6 жыл бұрын
One of the best tutorials on this ever ! Thanks a lot !
@armhodeanapple6188
@armhodeanapple6188 3 жыл бұрын
Bro! THANK YOU! I know this video is older, but you helped me out soooo much!!! God bless!
@genesmith8781
@genesmith8781 5 жыл бұрын
Great video! I have a 91 Nissan Sunny [European Sentra, basically] and I had exactly this problem. Thanks for the explanation and an easy fix!
@Al-ok1lj
@Al-ok1lj 6 жыл бұрын
Thanks for the video. It helped me pinpoint the problem on my 96 Pathfinder. It was a major pain to reach in and change the stopper.
@jolicg183
@jolicg183 3 жыл бұрын
Thanks to your video I was able to fix the same problem with my Toyota Avanza. Very helpful thank you.
@pjstrupp
@pjstrupp 4 жыл бұрын
Thank you, Carlos!! Worked like a charm!! I used Dorman part 785-126D. On my 99 infinity. Thanks again!!
@knighto.g1107
@knighto.g1107 3 жыл бұрын
I have a 89 maxima and this helped so much I just fixed it rn because of you I also didn’t know there was a second sensor thanks so much !
@angelsanes5775
@angelsanes5775 4 жыл бұрын
Wow I just bought a new switch and was having trouble getting the old one off so I came across this video. I tried the pad idea first and BINGO! Thanks bro. 👍🏽
@liquidmccloud6590
@liquidmccloud6590 5 жыл бұрын
Thx Carlos , i done this on my 350 today. My hands were too big so i used a needle nose pliers too hold the nipple in place.
@xt486
@xt486 6 жыл бұрын
Buddy thanks heaps.. didn't have a trim screw, but used a wall plug with screw cut short and inserted into wall plug.. . Great help from my daughter her car. Like in your case.. thanks again
@christophersmith5361
@christophersmith5361 4 жыл бұрын
Thank you! I have not tried this yet but I'm pretty sure its what's happening to my Nissan Teana. I thought it might be a big problem and big money....I saw broken plastic under the break pedal and wondered where it came from now I know. THANKS VERY MUCH FOR MAKING THIS VIDEO!!!
@prgarlick
@prgarlick Жыл бұрын
I fixed this by dropping in a Xmas tree clip to replace the missing gromet. I used forecepts (needle nose plyers) to push and pull it into place.
@stevesosinski6692
@stevesosinski6692 3 жыл бұрын
Thank you so much, I couldn't figure out why changing the switch didn't work, I used one of those Plastic push in rivets to fix mine, and I changed them both, you saved me a lot of time.
@taraaliyeva1813
@taraaliyeva1813 7 жыл бұрын
OMG.......! YOU SAVE ME $500 IN repair and work. God bless you!
@randallcromer66
@randallcromer66 3 жыл бұрын
Thanks brother, you have earned a subscriber for life.
@badfender223
@badfender223 5 жыл бұрын
Thank You Carlos - you saved me a lot of money.
@TherealIcedee
@TherealIcedee 4 жыл бұрын
Me too
@shawanacoleman45
@shawanacoleman45 3 жыл бұрын
Worked like a charm . Thanks just used a paper wrapped in tape to fix temporarily.
@plascenciapainting
@plascenciapainting 3 жыл бұрын
Thank you really appreciate you making this vedeo, you saved me a trip to the mechanic and time off of work 👍💯
@peacebe2u480
@peacebe2u480 4 жыл бұрын
Carlos, This is great video. Thank you so much. The camera angle is so clear. GBU.
@thewatchers9123
@thewatchers9123 7 жыл бұрын
Bro, you helped me find exactly where my problem was. Thank you.
@luisfernandez-bv2vm
@luisfernandez-bv2vm 6 жыл бұрын
Big thank you it was better than a mechanic guessing l did fix it all happiness. Keep posting me and many more will appreciate thanks again god bless you
@thxmateoli
@thxmateoli 9 жыл бұрын
The first sensor you fixed was the cruise control which has no effect on the brake switch .I had to replace both, needed to lower steering column to make it more accessible.
@deanburge8747
@deanburge8747 4 жыл бұрын
thank you carlos, i used a plastic clip from the door trim
@havoc5952
@havoc5952 2 жыл бұрын
Damit man you look young here love your videos good times are coming
@AngelHernandez-bw4vb
@AngelHernandez-bw4vb 5 ай бұрын
FYI one switch or sensor as you call them is for the brake light. The other switch is for cruise control and it's good that you fixed it because if it stays on your cruise control wont shut off!
@chipgracey169
@chipgracey169 2 жыл бұрын
Thanks a lot for making this video. I just had this problem today. Glad you told me what to do about it. It's easy, thankfully.
@MotsDXB
@MotsDXB 3 жыл бұрын
It was really very helpful... amazing video and explanation... thanks man , i fixed mine too after watching this
@Mudmonkeyrepair
@Mudmonkeyrepair 8 жыл бұрын
you can get him anywhere at your locals auto parts store go to the counter and ask him for plastic screws. you won't miss them.
@janetlorna07
@janetlorna07 5 жыл бұрын
You have saved people money and time. Bless you❤
@waleskamahonez9528
@waleskamahonez9528 4 жыл бұрын
Tengo ese mismo problema y como estoy operada no puedo doblarse para hacerlo yo misma😣
@waleskamahonez9528
@waleskamahonez9528 4 жыл бұрын
You use plate kit?
@Crlpope
@Crlpope 4 жыл бұрын
@@waleskamahonez9528 Yes it is 4 screws the plastic ones are best others will work.
@p71belcher
@p71belcher 5 жыл бұрын
Nice bro... l have a 2002 Nissan Maxima and mine went out last week. Gonna fix it first thing in the morning. Thanks
@FernandoRamos-yp7ef
@FernandoRamos-yp7ef 5 жыл бұрын
quiero darle las gracias por su video , mi esposo le puso un tornillo y listo ya nuestros frenos trabajan , mil gracias y que el SENOR ME LO BENDIGA
@LuisGuerreroOfficial
@LuisGuerreroOfficial 4 жыл бұрын
The magnets worked great! Just did it to my car and boom! 😆 God bless you all.
@jammark1
@jammark1 3 жыл бұрын
Thank you soooo much for your video. Simple and easy, love it!
@Julie-vo2nm
@Julie-vo2nm 2 жыл бұрын
Thank you! I was able to solve the problem in 5 minutes!!
@janetwoodworth4062
@janetwoodworth4062 2 жыл бұрын
Having this Issa with 2006 Volvo XC90, will check if this is same type of issue . Praying 🙏🏻 it is
@Jorgegomez-rr4ge
@Jorgegomez-rr4ge 7 жыл бұрын
wow it worked so good with my car,thanks Carlos,bless you
@Katmaxmusic
@Katmaxmusic 5 жыл бұрын
Thanks for sharing. I was quoted a price of a $120 to fix. Thanks to your prefect video, I will fix on my own. What size of screw did you pick out? Thanks for sharing again.
@jhonnyking7457
@jhonnyking7457 6 жыл бұрын
😎✋ Thanks dude, i almost pay $150 dollars to electrician ando Your vídeo save My MoNeY, i have a van Nissan quest 95, and i had This problem But i Fix it thanks to you!!!! Have Nice day.
@andrewmck6066
@andrewmck6066 8 жыл бұрын
thanks for the video - helped me fix my Nissan with the same problem
@BirdBoss
@BirdBoss 4 жыл бұрын
2020 and it just helped me with my Kia 🔥🔥 I have a pen holding it for now but going to Lowe’s in the morning I’m sure this will work I already see the hole for the screw
@ajakisland5486
@ajakisland5486 8 жыл бұрын
Thanks this helped a lot. I temporarily fixed it.The rubber part is broken, so when I brake it falls out again.
@222Lightning
@222Lightning 3 жыл бұрын
that makes sense about the light turning on when you press the brake pedal' I like how you explained that. My problem was fixing brake light switch problem....now I have a problem with middle brake light in back window staying on (this always worked despite left and right brake lights not working). Did I create a new problem? Also I'm thinking maybe I have 2 brake lights that need to be replaced and it was never the BRake Light Switch to begin with. What do you think?
@albertog6078
@albertog6078 3 жыл бұрын
great job brother! does it work on a toyota tacoma 98? thank you very much
@AngelReyes-ue2nt
@AngelReyes-ue2nt 7 жыл бұрын
thank you so much, I thought I needed to buy a new sensor but I just opened it and clean it up cuz the little nipple was stuck, replace it back and works fine . thank you so much God bless you
@bluedr3am805
@bluedr3am805 5 жыл бұрын
This fixed my g35 taillight problem . Thanks bro
@denokiggz
@denokiggz 7 жыл бұрын
Thank you. It helped solve the problem right away
@JosephLewis_518
@JosephLewis_518 3 жыл бұрын
Thank you so much awesome video saved me so much money 💯💯
@allend6137
@allend6137 2 жыл бұрын
Indeed… this is the video that made it all make sense. Fortunately the dealership had the part for $1.69 😃 Fixed it myself for my daughters car. If it were my vehicle I probably would have just opted for the screw 😂
@roygainey4317
@roygainey4317 2 жыл бұрын
The big help I didn't know that it was two sensors on it just like you said there's two I'm having a hard time I didn't know all that paneling all come off easy or trying to do it Laying across the seat thanks a lot big help
@socallalalayhee5283
@socallalalayhee5283 6 жыл бұрын
great diy video Thank You. i look forward to checking out your other videos!!!
@jonathanhowell122
@jonathanhowell122 3 жыл бұрын
How does this happen? Do the factory installed plastic bolt wear out or fall out?
@darlenemcleod6653
@darlenemcleod6653 3 жыл бұрын
Thank you you saved me so much money thank you. My mustang thanks you.
@johnnyViDeO
@johnnyViDeO 7 жыл бұрын
Nice. I just had the brake lights stay on in my 2001 Acura TL. Ssme problem and same fix with a $4. kit from Autozone. The pad just snaps in, The other sensor turns off cruise control when the brake pedal is depressed. The hard part is straining your neck upside down to see the parts. Invest in a tripod.
@BleacheDane
@BleacheDane 3 жыл бұрын
Gonna try it! Neighbor knocked on my door the other day and said my lights were on. Checked and learned the brake lights wouldnt disengage. This seems like the fix. I will update this as soon as i check it out
@gort400
@gort400 8 жыл бұрын
THANKS. Where did you get the parts. Auto Zone, O'reilly's, Advance Auto, etc???
@iLoveMelakaCars
@iLoveMelakaCars 3 жыл бұрын
Good video. Tq
@msavastano3705
@msavastano3705 2 жыл бұрын
Great fix!! You just helped me too.
@superque4
@superque4 6 жыл бұрын
Perfect fix. It's a bear to get at w/big hands but I fixed it for free w/a metal screw and nut I had laying around.
@paraminromain1243
@paraminromain1243 2 жыл бұрын
Thank you, your video was a great help!
@roygibson9812
@roygibson9812 4 жыл бұрын
Many thanks! Fantastic, excellent video
@rahulbball9395
@rahulbball9395 8 жыл бұрын
Great Video! What kind of screws are those, and where did you get them?
@altlandf
@altlandf 4 жыл бұрын
I replaced the headlight switch and a brake switch for my 89 s10 blazer. With headlights off hit the brake lights don't work. When the headlighrs are on BOTH the running and brake are lit. How do I tell the brake to turn off?
@dianahadasa
@dianahadasa 7 жыл бұрын
exelent/ thank you. does it work like this also with hundai?
@fernandohernandez4548
@fernandohernandez4548 7 жыл бұрын
What size are those screws?
ALL BRAKE LIGHTS STAY ON, HERES A QUICK FIX, DIY
4:42
RB The Mechanic
Рет қаралды 509 М.
FOREVER BUNNY
00:14
Natan por Aí
Рет қаралды 33 МЛН
Yay😃 Let's make a Cute Handbag for me 👜 #diycrafts #shorts
00:33
LearnToon - Learn & Play
Рет қаралды 117 МЛН
Кто круче, как думаешь?
00:44
МЯТНАЯ ФАНТА
Рет қаралды 6 МЛН
BRAKE LIGHTS STAY ON, HOW TO FIX IT EASILY! MUST WATCH!
6:49
Ford brake light switch operation and problems
7:57
Larry Cook
Рет қаралды 53 М.
How Tire Repair Kits Work - With Internal Views
20:32
knobsdialsandbuttons
Рет қаралды 4,8 МЛН
Honda and Mazda's New Engines are the Most Powerful Engines Ever Made
21:12
Brake lights stay on
3:12
realfixesrealfast
Рет қаралды 746 М.
FOREVER BUNNY
00:14
Natan por Aí
Рет қаралды 33 МЛН