Nissan Rogue Driveshaft Replacement

[@roberts1159]

Nice job and camera work. Having access to a lift makes this job much easier vs jack stands.

[@khoiquanvan7586]

It's great and simple. I took my car to the shop and they charged a high price. My house doesn't have a car lift like yours. I don't know what to do.

[@adrianleeds3468]

Well done - thanks. May I ask how many kilometres were on the car at that point?

[@barakobamadubai]

Thank you Alexander. It would have been great if you filmed what were the symptoms before and how it sounds after replacement. Today I have probably same issue with my Xtrail (GCC rougue)

[@brapppn-can-am-man6906]

Have a similar vibration at 30/40 MPH, I was thinking that it was a bad CVT, But I seen these videos. And I'm thinking its a bad Shaft. So im assuming that the drive shaft needs to be replaced too. I order mine, and it just came in. So ill be attempting to swap it out this weekend. The difference from me, is im going to try to do it, By jacking the Rogue up, and putting it on 4 Jack stands. Hopefully that will give me enough room to work underneath the car. As i dont have a lift.

[@jorgeantonio]

having same issue, on 2013 niisan rouge 2013 sv, let me know if you fixed yours

[@brapppn-can-am-man6906]

​@jorgeantonio, yes, it was the problem. I had my girl, step on the break pedal when I needed it to stop from turning the shaft. Its a fairly simple process, Just get the Rogue up about 2.5 feet off the floor/ground. Start at the rear, then on the front transmission, and then remove the outer bushing nut, make sure to remove the rubber mounts from the exhaust, to allow you to move the exhaust system to be able to get to the back bushing bolt. If you have a friend, have them take a pry bar, and move it back outta ur way. Good luck 👍

[@grilledchickenwrap]

Great work man!!! quick question by removing the driveshaft , technically you can also replace the Transfer Case Output Shaft Seal that is right there ? mine seems to be leaking.

[@Mohamed.AlShimy]

Good job and very good Camera

[@miguelugarte112]

Nice video. Thanks.

[@Omardottcom]

Where did you get the new drive shaft from? I need one for my car. I had bought one from Amazon for my rogue and replaced it. Was easy to do, however the new one made a thumping sound so I returned it. The original one that came in the car had staked U joints so they couldn’t be replaced. You mentioned that you had a vibration at over 80mph but you balanced it out, how did you do so? How’s it going so far?

[@isaiasreyes6440]

i been wanting to ask you, but what exact tools did you use to remove the radiator support on the 2002 es lancer? id really appreciate it!

[@NURsMec]

I just subscribed sir. I like your video

[@Thelegend-z7d]

Does this mechanic have a shaft? Or a sleeve?

[@CULT539]

🤡

[@adalbertosantos5633]

Onde fica essa oficina

[@Alexa_Spencer]

As in the repair facility?

[@allenboyden77]

Use a swivel head and extension over real quick

[@executive]

I've never heard of a Nissan Rouge

[@tristennicolas6631]

【ｐｒｏｍｏｓｍ】