Nissan Rogue system upgrade

[@brodihurt7606]

I did like you showed in the video and my speakers and sub are loud and then they so really quit do you know what the problem is

[@themig2131]

If your door speakers got quieter, I would try and Identify if it's just one or all of them. Depending on the splicer you use, it could cut too much into one of the speaker wires making a bad connection.

[@brodihurt7606]

It's all the speakers is there like a stock amp or why randomly it goes quit and the speakers shave like a static sound

[@MattMolecule]

Love this video btw, I ran my LOC to the subwoofer in the truck. Hope it works

[@joshb8530]

which amp kid did you use? did it come with the RCA adaptor? Thank you!

[@themig2131]

I used a hifonic amp that puts out about 600 watts rms. I purchased the RCA converter from Amazon.

[@zonewynn]

Where did you put gound wire to amp

[@themig2131]

I grounded the amp on the body of the Nissan just behind the rear seats. I cleaned off the paint with sandpaper and used a self tapping screw.

[@PathtoRecovery-b7K]

Thanks this helps a lot. I may need to sand mine down. Might not have good enough ground.​@themig2131

[@MattMolecule]

Where did you run the hot wire through the firewall at?

[@MattMolecule]

Nvm I see. That’s exactly where I did mine

[@PathtoRecovery-b7K]

I am having trouble locating where the hole is under the hood on the other side of the firewall. I drilled a hole exactly where you did. But now im having trouble feeding the wire from there. How did you feed the hot wire to the battery?