Thank you, for taking the time to make these videos.
@jimmyjimjims74833 жыл бұрын
This is very useful info, I'm working on a carbureted Toyota 4AF with very similar symptoms. Misfires on cylinder 1 but has 150PSI compression on all 4 cylinders. The diagnosis has led me to a new cap/rotor and then praying it works lol
@antoniopagan55363 жыл бұрын
Excellent job... u r awesome sir…@ForkliftGeek
@henrikjonsson43403 жыл бұрын
Thank you, the technical detective :) good work, I learned something too.
@arniesand3 жыл бұрын
Another excellent video! Thanks.
@TheDisgruntledMechanic3 жыл бұрын
thanks! great diag!
@AleksandrSafonov-lm4dv3 жыл бұрын
Hello from Ukraine. You can try to replace the transistor. It will be cheaper for the customer.
@kieronbrooks28983 жыл бұрын
Great advice keep it coming 👌
@CliffH10823 жыл бұрын
Had the same issue last month on 3 different k21's. All cylinder number 1 ecm driver shorted
@joelgarcia-zl3li3 жыл бұрын
nice work man.
@edgarrivas57913 жыл бұрын
Very informative
@muhidinsaleh938921 күн бұрын
Thanx for this
@billmartin252 жыл бұрын
Very informative video
@luxpieces Жыл бұрын
So did you also have a bad coil, since there was no spark when you switched it originally with another cylinder? Thanks for the video
@forkliftgeek10 Жыл бұрын
Sorry to mislead. What I meant to say was I swapped a good coil into cylinder 1 and there was still no spark on cylinder 1 even with a good coil.
@luxpieces Жыл бұрын
@@forkliftgeek10 Thank you for the clarification.
@kevinrobins64722 жыл бұрын
what is the part # for the coil? also what should the plugs be gapped at ?
@reelhooked53993 жыл бұрын
Im having the same issue on same engine. I dont have these tools but i imagine seeing the readings and voltage youre getting, i can check it with just a multimeter and see if i get the same voltage?
@forkliftgeek103 жыл бұрын
If you see the same average voltage, it will be an indication that the wire is more likely ok. To verify it is not a high resistance in the wire you could bypass the wire.
@bentleybob22792 жыл бұрын
i have a similar problem. changed the computer and it got damaged shortly after as well. same number 1 cylinder.
@forkliftpowergarage54353 жыл бұрын
Hi bro i am From Bangladesh. Well see your all video. You can tell me. which diagnoses tools do you use. Name plc
@forkliftgeek103 жыл бұрын
Picoscope
@gliderarts35732 жыл бұрын
My D21 has a missed fire once per second At 2000 RPM Just like clockwork Everything is new even the injectors we're replaced as a complete set dont Know what the problem is
@forkliftgeek102 жыл бұрын
Might be a valve seating issue
@millie65818 ай бұрын
So code 678ph & code 17859 -
@jonsonaugustin23983 жыл бұрын
Hey what kind of set up is that
@forkliftgeek103 жыл бұрын
Its a pico oscilloscope
@jonsonaugustin23983 жыл бұрын
@@forkliftgeek10 OK thanks I’m going to look it up