Nissan Versa SV 1.6L 2012 - Part 3/4 - CVT Sub Assembly Reassembly REF011A / JF015E

Part 3 of 4 - REF011A / JF015E CVT Rebuild
Vehicle: Nissan Versa SV 1.6L 2012
Transmission: CVT REF011A / JF015E
So you've taken apart the sub assembly with the pulleys or you haven't yet, but wanted to see how it looks like to put it back together? Thanks for asking. Here's just that.
Video Markers:
00:14 Parts Review & Belt Direction
01:05 Primary & Secondary Thrust washers
01:27 Primary Pullet & Belt
01:45 Secondary Pulley
02:55 Primary Pulley Screw Plate
04:28 Primary Pulley Speed Sensor
04:40 Secondary Pulley Speed Sensor
05:05 Review
-----------------------------------------
Tools Required:
1. Pry bar
amzn.to/3biuGbL
2. 12mm, 10mm socket
amzn.to/3ecYcSa
3. 3/8'' torque wrench
amzn.to/2NVc9cL
-----------------------------------------
Parts needed:
1. Genuine NS-2 Nissan CVT Trans. Fluid
amzn.to/3sSkKLS
2. Chain Belt for REF011A / JF015E
These can be purchase through eBay
3. Primary & Secondary CVT Pulley for REF011A / JF015E
These can be purchase through Alibaba

[@Nonanepod]

It’s a very useful information to me. Thank you very much.

[@JRHill-xc7ms]

Thanks for this video u just got a subscriber !!!!

[@luisfernandez6717]

great video, i removed the oil pan on a 2015 Nissan Versa Note cvt i just picked up that barely moves sometimes it grabs, and it had alot of metal shavings and 2 blades of the steel belt on the oil pan. my plan was to just change the filter and oils. should i try it or not even waste the oil on it?

[@richardb1791]

I rebuilt a few Ford and GM automatic transmissions back in the day when I used to screw with that stuff. Your videos are excellent and show the real life experience of messing with this shit. I agree with your point on another of your videos that pulling and reinstalling these in the car is a much bigger pain in the ass than the bench top rebuild. Great videos!

[@BehzadEghtesad]

thanks for the video. is it possible the belt detroyed in 70K miles? mine in 70K dose not have forward/ reverse except 1 feet in high rpm.

[@azohussen5120]

Thank you

[@ricardoesparza5267]

Hi I keep watching your video is it is helping me a lot your vehicle is it 2012 and I have it 2015 the parts for yours fit on my as well the overhaul kit have all the o-rings needed including the ones on the bottom of the pulley 2 Teflon White o rings thank

[@thegamepz]

Thank you for the video. Just rebuild one transmission and so far everything went smoothly. How long the Chinese parts last ? I ordered genuine Nissan but the seller scammed me on EBay and I got Chinese. My transmission has the heat exchanger and additional hoses that go in radiator heat exchanger. Under normal operating conditions fluid is around 195-200F on the highway it drops a bit. Thinking of bypassing the coolant hoses in the heat exchanger that is bolted to the transmission and leave the fluid go thru the radiator cooler then thru external radiator that I bought and after that to go back to the transmission. I doubt there will be any long term negative effect if the fluid is 140-150F instead of 200. In my area temperatures doesn’t drop bellow 37-40F Another thing: how precisely you have to measure the snap ring on the bearing ? with the tools I had available every reading was off by 0.3-0.5mm so I took the average and decided to use thinner snap ring. ( not to cause excessive preload and destroy the bearings)

[@rodolfotames815]

Thanks you very very perfect

[@roneymarkose1736]

Only piston we can purchase or primary and secondary pulley assembly

[@josefranciscoesquertalaman3827]

Excelente *Like !!!* saludos desde Sonora México

[@TheLaborService]

Gracias!

[@josephmac2386]

I was told that a CVT transmission could not be rebuilt. And then I saw this video. I was lied too

[@TheLaborService]

Yes, the dealership usually just replace them and charge the customer an arm and a leg, these transmissions are actually a lot more simpler inside than a regular automatic transmission. There's not that many internal parts.

[@josephmac2386]

I'll be dipped thank you sir

[@GF-mf7ml]

In Asia almost all CVT are repairable. But not all automatic.

[@c14back2nitrogen9]

Thank you looks doable. God bless you

[@rubenca5989]

@ThLaborService, where the barrels u used or new and where do you recommend getting new belt. As precaution want to replace belt and want to know if primary and secondary and be reused. Please good recommendation to buying quality belt?

[@remyhelu9397]

How do you know if your primary and secondary pulley any good

[@safwansatti5653]

Thank you very much, your video will help a lot of people What was the wrong with your transmission what update did you do?! New sub

[@TheLaborService]

The chain belt inside the transmission broke after about 100,000 to 150,000 miles of driving. So I pulled everything out and rebuilt it. Changed the clutches, transmission pump, seals, o rings, rebuilt everything back.

[@safwansatti5653]

@@TheLaborService thank you very much. I'm doing mine soon. where do you buy parts?!

[@raoulraoul7129]

@@TheLaborService this transmission have problems with overheating? How it can be solved? Thanks.

[@TheLaborService]

@@raoulraoul7129 My friend try adding another transmission cooler to the transmission line, watch my video here. kzbin.info/www/bejne/oIa2kodtbJatb6M

[@raoulraoul7129]

@@TheLaborService Thank you dear friend, i love you.

[@marcasswellbmd6922]

Love the Language.. Seriously Good Video.. I own a Juke, I stress over my AWD CVT and Drain and Fill the fluid twice a year.. Which people tell me is over Kill but I don't care. I want clean new Fluid's in my car at all times.. I change my Oil every 1000 miles and I do a 5 quart CVT drain and fill every summer second week of June, Right before the summer Hot months.. This is something everyone with a CVT should do every summer.. This fluid acts more as a protectant to the pully's and Belt more than just a Hydraulic fluid.. And the summer is when the fluid burns up the most.. Nissan in it's infinite wisdom didn't ad a CVT cooler to a trans that only holds a total 8.5 quarts fluid.. Most older cars with automatic Trans hold 13 to 15 quarts which makes a huge difference in protection and longevity of an automatic Trans.. You can get up to 300,000 miles out of these cars but you have to do the maintenance.. Or drive like my Mother.... But if you got a heavy foot or Like being first and Getting in front of the Assholes that want to drive slow in the Passing Lane.. You Need to do a Drain and Fill's on all these different types of CVTs at least once a year.... I highly recommend this! And don't listen to the asshole at the dealer that says Oh you already have 70K 80K or 90K on your Trans it's better to just leave it alone at this point.. They are Wrong!! And Makes no sense with a CVT, that uses the fluid more as a protectant than anything else.. That used to be true with older automatics, (But if you went to 20,000 miles without an Oil change you would never say Oh well it's to old I might as well just leave it in there and just wait for it to Blow up..)

[@cartoons4athena]

I have a Note with a CVT, I change the fluid once a year. People say I'm crazy, I thought I was the only one out there changing the fluid. I'm at 100,000km and hoping for another 400,000!

[@lonerlink1993]

when you shift between reverse/drive give the cvt a sec to adjust.

[@Music-zh1mo]

Can we dismatle and install for this part without remove transmission down.

[@josefranciscoesquertalaman3827]

Excelente muy buena Información *LIKE !!!* me suscribo saludos desde Sonora México

[@TheLaborService]

Thank you my friend!

[@ormondfenty1840]

@@TheLaborService A

[@mdwarishali4344]

Nice sir

[@TheLaborService]

Thank you!

[@CesarRodriguez-mw9ok]

Tienes videos de desaemar el cuerpo de valvulas

[@corazon5633]

I follow you from algeria 💪❤️ good joooob

[@TheLaborService]

Thank you my friend! I will have more videos soon. I have been so busy. Thank you for the follow!

[@lixlix9167]

hello. please help. i have nissan march k13 2012 with cvt. and i thinck cvt chain is slipping. what can you do?:( from ebay and alibaba redesigned. from where i can buy a new?

[@keeganhowell4193]

can the pulleys be done with trans in the car?

[@hermanjones4124]

I rebuilt my CVT JF011E transmission got it put in but I’m getting a secondary pressure solenoid stuck on ( low pressure) what do I need to look for Thanks I replaced valve body with a complete reman Please can you help 5:53

[@douglasdarville969]

Belt got destroyed on my 2015, would I be good just replacing the belt for the time being? Already have the trans pulled, pulleys out valve body out and all the belt remnants cleaned out. I don't have the money right now for a full rebuild and just hoping this'll get me by

[@Lucky.420]

How did just replacing the belt work out for you?

[@BroadwayLTDProductions]

Primary pulley piston is one of the main causes of issues with these transmissions. They often blow a seal especially when the transmission runs too hot (which they almost always do because they have trash cooling systems). When the seal blow, it takes fluid pressure away from the rest of the transmission especially the clutches.

[@izzydizzy1115]

This is why I installed an external transmission cooler.

[@robertinogg]

@@izzydizzy1115 Can you share the idea how to do this?

[@jerrytroup3796]

. Do you know where to source the seal?

[@abdulmajeedjal-harbi242]

I need you because i have CVT transmission has same problem

[@adamakonate3930]

Aidez-moi s’il vous plaît, j’ai un problème avec ma mission sentra cvt quand je passe en vitesse (R) et (D) Lors de l accélération la barre ne dépasse pas 1.5 contrairement au parking sa ronfle bien Pensez vit que c’est un problème de la pompe à huile ? Besoin de vos idées

[@angelsantillan999]

Can I buy the kit if I do where how much will cost me ?

[@denniscow9054]

How did you get the secondary pulley to fit in with the belt, it seems to tight and it won't slide in the casings

[@keeganhowell4193]

Is this something you are attempting I’m afraid I won’t be able to get belt back on if I pull it apart I’m trying to see if the can also be done with trans in the car

[@luisitokunsaurio8692]

And how do you check that the main drive is working after repairing it?

[@TheLaborService]

I was not able to check it after the rebuilt. I trusted my gut in the rebuilding process :) everything inside was replaced correctly to spec. I did have an issue with the reverse clutch and had to pull out the transmission again, I also cut that part in the video explaining what the issue was that I found which caused the car not to drive in reverse.

[@jehu00]

Where can I bought this pulley's? I own a Sentra 2013 with transmission issues, and I want to replacement for it without changing the complete transmission. Excellent video :)

[@TheLaborService]

I got the pulleys off of Alibaba.com

[@jehu00]

@@TheLaborService let me check on it ✅ thank you. And again, great, great video. God bless your family, work and all you do. Cheer's

[@TheLaborService]

@@jehu00 Master rebuild kit, transmission pump, along with the Loctite seal to seal everything back was all on eBay. Thank you! and God bless you too!

[@Bonkeyable]

My 2014 Sentra was driving normal just had a whine coming from the belt and pulleys. So I opened this transmission from the side and replaced them. I put everything back together and now the car doesn't run. I returned the old pulleys and old belt and now it only drives 5 minutes and it slips. I'm so confused. What could I be doing wrong? Edit!! So I found out what was wrong.. when both pulleys are being put on be very careful when trying to put them in their spot. Try not to use a screwdriver I learned the hard way. It can damage the gasket that goes under the pulleys. To see if they were installed correctly use air pressure to see if they activate. Put air through the two little holes and see if each pulley activates. If they don't you've installed them incorrectly.

[@jessed96]

@@Bonkeyable Im going to do this on mine here soon, I just barely transmission put in yesterday and got everything back in like normal and now I have to pull it out again, I'm going to test the pulleys with that air think to see if I installed them correctly (I also took them all apart to rebuild them and think I didnt do it right) so I'ma blow some air in there and pray it doesnt move mostly because I want to see if that was the problem

[@vimver6394]

Urgent ?!Can anyone know code number for this part? This is for mazda 2 demio 2008.. thanks before..

[@ppablitoslanches]

How many quarts of oil do you need to put in the transmission after it has been repaired?

[@lonerlink1993]

add 5 of whatever cvt fluid it takes, then get it to operating temp and drain from the overflow.

[@user-lt7ne9bt6e]

I am a CVT mechanic working in Dubaï

[@ernestech7642]

The transmission have to come out the car to replace this kit?

[@diceboyscripts4597]

No sir, the car has to come outside of the transmission. Now look up how to drive into a wall.

[@jayaprakashbottla710]

Make a vedio about electric parts 🙂&e bikes

[@jessadamueankaew3729]

😀😀😀😀

[@Boss35900]

What’s the difference between re0f11a and re0f11b?

[@TheLaborService]

I don't think there is such model number.

[@Boss35900]

@@TheLaborService It’s installed in 2020 Versa, and i’m trying to find information about it but I can’t find it anywhere.

[@LuisRuiz-mg7ry]

Pero no mordiste el teflón de anillo

[@glock18supercharger]

0:52 Great 💩 3 metals on friction all time

[@morriskamara6587]

Morris kamara

[@davejames2015]

Can a guy actually get new part's

[@TheLaborService]

Yes, you'll have to order them through eBay and Alibaba

[@Wisdom-jp4qe]

You had to replace the pulleys seals because the pulleys works with high pressure fluid and this seals are worn and loses the pressure 100% sure the seals are bad. That is the weakest part in this transmission