guess who's changing out a valve body out today ? thanks for the video
@gautorepair Жыл бұрын
no way. those are always fun. hope everything goes well. good to hear from you bud
@johnr29188 ай бұрын
You let us hear you talking but then when you took it apart which is the most important part you fast forwarded it and no direction.
@TttTtt-q3i18 күн бұрын
Hello sir, I have a 2006 Nissan Xterra same vehicle where’s the output speed sensor on the transmission please
@i-still-cruz2430 Жыл бұрын
I’m having this exact issue on my 2005 Frontier. Will a bad TCM give a different code than a bad valve body? My OD light isn’t on bud OD is not working or low gear. It’s like I’m taking off in 2nd or 3rd gear 🤷🏼♂️
@honeybadger43979 ай бұрын
My 2006 pathfinder jerks when R is selected and also the transmission gives a P0744 and P1759 code do you think changing the valve body will work or no? Also a jerk when OD is engaged and disengaged.
@kilobyts5703Ай бұрын
Ow much do you chage i need to pix mine also thanks
@petevidales15195 ай бұрын
What’s the torque of the bolts that hold the transmission module? What’s the torque to screw the outer cover back on? Thanks for this video.
@HunterRizzle4 ай бұрын
Not sure about the torque for the pan but the valve body bolts are torqued @ 70 in/lbs
@Mytch63 ай бұрын
Where did the owner get the tcm from? Where are you located in South Florida?
@jpadilla0515 Жыл бұрын
If the solenoid is bad, can I replace just that on the valve body? Or do I need to replace the whole thing? Also notice some place say "pre-flashed, no dealer flash required with vin #" how true is that? Great vidoe btw thanks
@gautorepair Жыл бұрын
Im not sure if they sell just the solenoid. But if it comes pre programmed then its plug and play
@mikeshelton842011 ай бұрын
just want to check,is the input turbine sensor is part of the selonoid pack my 07 pathfinder keeps setting a code for that P0715 thank you for any input
@ac4ajАй бұрын
Hi there, i have same issues with my xterra. Just want to know the part number of the body valve thanks.
@v.n.7495 Жыл бұрын
Hello. I recently got pathfinder 4.0 2010. when i shift from R n D there is a slight delay. about 2-3 seconds. Only when from R to D. Is this normal? this may be a common problem with this car? new fluid and everything else works fine. thanks for the info
@davidbryant58758 ай бұрын
Got a 2005 Titan 2wd. Mines is sluggish taking off feels like it’s taking off in 2nd gear just for a few seconds when it gets going all gears shifts fine
@ramman87110 ай бұрын
I'd like to see it slowed down in the middle and hear what your saying!
@coolghoul9 Жыл бұрын
Would you be able to change the output speed sensor through there or easier to go through the drive shaft side
@angelogarcia13734 ай бұрын
I changed the tcm but im getting a u1000 code and no gear indicator does it need to be reprogram
@gautorepair4 ай бұрын
Yes. Programming is required
@angelogarcia13734 ай бұрын
Nissan dealership said that there's no available programming for the tcm I bought online
@AaronMears Жыл бұрын
Is the vehicle speed sensor reachable after the valve body is removed?
@DaRealStatus4 ай бұрын
One is on the valve body the other is in the bell housing
@lobsterstrange Жыл бұрын
My frontier truck jerks violently when you put in drive and reverse. it also jerks when slowing down at the light and jerks from 1st to 3rd. Do you think I should change the valve body?
@gautorepair Жыл бұрын
Have you scanned for codes
@lobsterstrange Жыл бұрын
@@gautorepair Yes they said I should change throttle body change the throttle body. Nothing changed
@gautorepair Жыл бұрын
The throttle body or the valve body? Two different parts
@lobsterstrange Жыл бұрын
@@gautorepair throttle body is what I changed and it was still jerking
@gautorepair Жыл бұрын
With out knowing the codes or anything it would be difficult give you a direction
@emystones Жыл бұрын
I have the same problem on my Titan, solenoid is bad so I need to replace the valve body. I’m from south Florida can you send the contact ?