Nitro RC tune like a pro from a Traxxas professional

[@CrazyDadNitro-2.0]

Nice video. Love your editing. 😂😂 therapy time . Here for a bother one . Awesome. 🔥🔥👍

[@michaelgraham2943]

@@CrazyDadNitro-2.0 thanks I appreciate that 😁👍

[@landonsparks5632]

Sweet Nitro Man

[@michaelgraham2943]

@@landonsparks5632 Thanks 👍

[@THERCDOCTOR]

Nice video 👍

[@michaelgraham2943]

@@THERCDOCTOR Thanks 👍

[@MR.B.1620]

Another fun video!

[@michaelgraham2943]

@@MR.B.1620 thanks 👍

[@MR.B.1620]

I like them tires, I'm rolling Louis sc Hummers which are great too

[@michaelgraham2943]

@@MR.B.1620 nice I will have to check those out 👍

[@CrazyDadNitro-2.0]

Your location at 25.19 is were I need to take the jato . Great spot .

[@michaelgraham2943]

@@CrazyDadNitro-2.0 it is a nice spot .

[@MR.B.1620]

Man, these cold weather starts are rough

[@michaelgraham2943]

@@MR.B.1620 it was only 62° not sure why it gave me that much trouble I can only guess that the low speed was just too lean.

[@Jobanivrodnachui]

Traxxas and professional in one sentence😂

[@michaelgraham2943]

@@Jobanivrodnachui 😂

[@MR.B.1620]

Almost encouragement enough for me to get out there!

[@michaelgraham2943]

@@MR.B.1620 😁👍

[@Jabroni804]

Very informative video. The sound effects were very distracting for me.

[@michaelgraham2943]

@@Jabroni804 😁 I have other tuning videos without the sound effects I just found this video to be boring so I just played around with it 😂 appreciate the comment 👍

[@Jabroni804]

⁠@michaelgraham2943fair enough! Thanks for your contribution. What are your thoughts on using 3D printed replacement parts?

[@JustBashinit_Rc]

Awesome video! What fuel are you running?

[@michaelgraham2943]

@@JustBashinit_RcThanks 👍 VP 20% nitro 14% oil

[@JustBashinit_Rc]

@ is the vp better than the traxxas nitro?

[@michaelgraham2943]

@@JustBashinit_Rc I would say yes just make sure you run 11% to 14% oil

[@michaelgraham2943]

@@JustBashinit_Rc VP recommends the 20% nitro and 14% oil for the Traxxas engines

[@JustBashinit_Rc]

@@michaelgraham2943 ok I might try it

[@MR.B.1620]

I've got a head heater that uses a lipo for heat, takes forever

[@michaelgraham2943]

@@MR.B.1620 I always wanted to try one how long does it usually take?

[@MR.B.1620]

@michaelgraham2943 20 minutes or so, a couple ten minute cycles at least

[@bigjay369369]

Should you not use wd40 after you run it? What should you use?

[@michaelgraham2943]

@@bigjay369369 Check out my other video Why I Don't Use WD-40 On My Traxxas Engines I run VP fuel they say you don't need it and so far I haven't had any problems.

[@LameduckArmyOF1]

I've had. Y nitro rustler for 3 years and have only used WD-40 NEVER HAD INE SINGLE PROBLEM OUT OF IT. AND I ONLY USE Traxxas FUEL FOR IT! I USE VP FOR MY OTHER VEHICLES.

[@michaelgraham2943]

@@LameduckArmyOF1 that's awesome Jay what engine is in your rustler?

[@NitroFreak]

nice vid man the joys of nitro tuning

[@michaelgraham2943]

@@NitroFreak exactly 👍 that's what keeps it entertaining if it was too easy it would just get boring.

[@michaelgraham2943]

@@NitroFreak what do you think the problem was? I can only think that the low speed needle was too lean. I normally don't have that problem.

[@NitroFreak]

@@michaelgraham2943 i agree low sounded to lean to me as well

[@michaelgraham2943]

​@@NitroFreakfor some reason I can't seem to find Nitrovlogs channel do you still see it ?

[@NitroFreak]

@michaelgraham2943 me either i think it was taken down for some reason

[@Nitro_rc_life]

Odd way of editing. I prefer your old method!!

[@michaelgraham2943]

@@Nitro_rc_life I noticed I tried talking way too much so decided to make fun of it 😂👍

[@Nitro_rc_life]

@michaelgraham2943 I like watching you. No need to make fun man!!!! Don't let others get in your head or even yourself. Be genuine ✨️ 💯 and let the freak flag fly my friend

[@michaelgraham2943]

@@Nitro_rc_life appreciate that 😁👍