No Crank No Start Chrysler Dodge Plymouth Jeep Ignition Actuator Pin Replacement 1995 - 2007

Chrysler, Dodge, Plymouth and Jeep models years 1995 - 2007 have the ignition switch actuator pin between the ignition lock cylinder and ignition switch.
The Part is found also on Amazon here: a.co/d/9Kko5lK
Compatible Replacement for Chrysler, Dodge, Jeep & Plymouth Vehicles - 1996 - 2000 Cirrus | 2001 - 2002 Prowler | 2001 - 2005 PT Cruiser | 1996 - 2006 Sebring | 1995 - 2005 Neon | 1996 - 2006 Stratus | 1997 - 2001 Cherokee | 1999 - 2004 Grand Cherokee | 2002 - 2007 Liberty | 1997 - 2006 Wrangler | 1996 - 2000 Breeze | 1995 - 2001 Neon | 1999 - 2001 Prowler|.
We are a DIY family. You can also follow us at the below links:
/ 2stallgarage
/ 2stallgaragellc
rumble.com/use...
SAFETY FIRST
Always wear protective gear.
Check out our other videos. These videos are for entertainment purposes only. Complete the work at your own risk. Have a wonderful day 2SG family!
If you found this video helpful, consider subscribing & thank you for your support.
Like / Share / Subscribe!
If you enjoyed the video today, hit the like button, subscribe and come back again. Thank you for your support!
Message us!
Drop comments! Message us on Facebook & Instagram!
THE LIKE BUTTON
Please HIT the LIKE button if you enjoyed this video.
---------------------------------------------------------------------------------------------------------------
We work on ANYTHING with an ENGINE using mostly BUDGET TOOLS.
What's your favorite thing about this work?
We hope this video helps encourage you to start or continue working on whatever project you've got sitting around. We hope you have a great day.
We appreciate our subscribers and viewers. A BIG THANKS to each of you. Remember, this is something YOU CAN DO so REACH OUT with QUESTIONS and don't be afraid of Starting-Continuing-Finishing the work your project needs.
SEND US MAIL!
We no longer have this option. Maybe in the future!
Any additional thoughts?
We complete work in a small 2 stall garage with limited space. You can do anything you would like to do, no matter the space you have, just plan accordingly and adjust your plans to the size of your workspace. We Believe In YOU!
Are you able to do lots of work in a limited space?
Yes, without question. The biggest issues we face in our 2stallgarage are organization. Keeping the workspace organized and both stalls clear of clutter really helps with motivation, which then helps with productivity. Basically, if I see a clean workspace, I'm much more ready to dive into a project or even just scheduled maintenance.
#nocrank #nostart #ignitionswitch

[@joehnizdosr3674]

Love watching your common sense videos

[@2StallGarage]

How are you guys doing so far this week? Fall is just around the corner.

[@joehnizdosr3674]

@@2StallGarage buying a new transmission for my 2018 Chevrolet 4x4 long time till fall in Texas but Blessed by our Lord

[@2StallGarage]

@joehnizdosr3674 Amen. I hear it’s hot there. Slowly cooling down up North. 69 degrees today. The Lord be with you all throughout the week.

[@walkingintranquillity9071]

Waiting on parts from Rockauto, going to be working on my 92' Toyota 4runner with a manual trans. Have to do a tune up on it (fuel filter, spark plug wires, ignition coil. etc). Keep the videos coming, we have to keep these old trucks on the road

[@2StallGarage]

Love it!

[@GlassWerx]

Awesome fix. Those security bits and precision screw driver sets from harbor freight are definitely a worthwhile purchase. Iv had to buy a set a time or two. Now just need better eyes to see those tiny screws 😂😂

[@2StallGarage]

I can relate. I believe I need some glasses soon. Have a good night all.

[@GlassWerx]

@@2StallGarage I went from regular glasses to bifocals 😂.

[@2StallGarage]

@GlassWerx upgrade! Do they help you?

[@GlassWerx]

@@2StallGarage not really still need to take them off to see small stuff up close. Need to go back n and get eyes checked again anyways. Diabetic so that effects the eyes over time if not careful

[@2StallGarage]

@GlassWerx yes. 🙏. I’m a type 1 diabetic so I understand.

[@MIZIKDANKAPATYA]

Thankyou for you Great video 🏁🏁

[@2StallGarage]

Thank you

[@moparnut6286]

😎👍🏁

[@2StallGarage]

Hope Tuesday is going well for you. Keep up the good work over there.

[@Brooksyscarrestorations]

G'day from Dad and I!!

[@2StallGarage]

Hey guys!

[@BRICKNYLON]

01 liberty, 3.7 been stranded since Thanksgiving, have replaced alternator, new ground, new battery, all relay and fuses good. Will start and idle fine, as soon as in gear and under load dash lights up before vehicle dies.

[@2StallGarage]

ah bummer. Do you have a service manual to show you all the different ground points? If not, I can probably find one for you.

[@Niebs-d7n]

🙏 thank you

[@2StallGarage]

Yes, hope it helped.

[@Brooksyscarrestorations]

Dad had a very similar issue in his Territory. Broken metal tabs!! lol

[@2StallGarage]

Silly things! Have a good day. 🤜🤛

[@Brooksyscarrestorations]

@@2StallGarage you 2 Good sir!!

[@TheRayInPV]

I saw another video on replacing the actuator pin and it didn't work, but then he realized he had not put back a little metal piece he hadn't noticed had fallen out. It looks just like that piece you showed that fell out. Once he put that little metal piece in the slot it went in, the car started. Correction, he doesn't mention it wouldn't start, it's just that the gear shift could be moved while the key was in the ignition. Here is the link to the video with the time stamp kzbin.info/www/bejne/Y2bQoGaFdqmIpKMsi=Mxx58JfdClBm9cZL&t=454

[@2StallGarage]

Interesting. I might try to find that video to see what exactly happened.

[@2StallGarage]

Thanks for sending the link!

[@JoeBlow-vx5po]

Yeah that metal plunger piece is for the shifter lock so you can't move the gear shifter without the key in or remove the key until in park

[@TheRayInPV]

@@JoeBlow-vx5po It's really good to know, as it looks easy to lose if you're not careful.

[@SonOfGod757]

Ur a goat

[@2StallGarage]

Hope it helped. Merry Christmas!

[@rjjoseph138]

OK, I was driving and my transfer case blue then I gotta replace I was driving down the road again my EPS light traction control light turned on and the check engine light

[@2StallGarage]

Do you have a code reader to check codes?

[@rjjoseph138]

@@2StallGarage p0504 p0401

[@rjjoseph138]

@@2StallGarage p0504 and a egr code

[@BASRANCH]

I need to show the kids how to wack the starter so I don't need to crawl under there.

[@2StallGarage]

I bet they would love to help their dad!

[@CHANDONDAS-l6o]

I enjoy watching your KZbin videos, your video quality is really good. But do you know that your channel video will get lots of more views. Because your KZbin channel is not getting lots of more views and subscriber due to some problem. Are you interested, I can share if you want.

[@2StallGarage]

Good morning. What am I not doing correctly?

[@CHANDONDAS-l6o]

@@2StallGarage I found out your channel problems: You didn’t properly optimize & research for search keywords base Title, Description, rank keywords, high search volume tags. And you didn’t completely SEO this video off-page and on- page SEO. And you didn’t create any backlink for your video promotion. So that’s your video not getting lots of more views and not increase subscribers. You solved these problems will getting lots of more views and increase subscribers and channel grow very fast.

[@CHANDONDAS-l6o]

@@2StallGarage I can help you, If you want. I'm a profession Digital marketing Specialist and KZbin growth expert.

[@CHANDONDAS-l6o]

@@2StallGarage Do you want to organically rank your KZbin channel and make your videos go viral?