No Internet in Your Garage? Get Wi-Fi Signal Inside Your Metal Building - Here's How! - Shop Upgrade

We need to be able to watch KZbin videos in our new shop and we couldn't get wifi signal. Here's how we fixed it using a power line network!
Power line network: amzn.to/3FkBvb6
Router: amzn.to/3tyNjnn
TCL Roku TV: amzn.to/3rRZET4

[@MrTinTennessee]

If for no other reason than you’re passing along wrenching to the next generation, I’m subscribing. Thanks for the Wi-Fi info.

[@PeeksPeakHobbyHomestead]

Right on! Thanks!

[@Dark_Knight_USA]

Greetings: I like the idea of teaching the child about things by disassembly, identification and organization. Qualities most adults do not learn. He will know more at 10 than most will their life. Good job. I applaud U. Thx 4 the share.

[@rodeleon2875]

thanks for the info and idea. these things are great and i have the tp-link version in my shop. a big gotcha is that besides not plugging the powerline adapter into a surge suppressor, it also will not work in a GFCI. the tp-link docs say it has to be on the same electrical circuit, ie breaker and that is not the case. they never mention the gfci part. it works on a non gfci, non surge processor outlet off my shop subpanel which is about 130ft from my house panel. i get about 15mb up/down which is good enough for my needs. and ya, trying to watch how-to vids on a cell phone with greasy fingers is not fun.

[@cedricjohnson5138]

How do you connect you router to the power line adapter? I get you plug it in but I can’t get my router to work with the adapter and broadcast the signal…

[@testvideo227]

I found a power line wifi extender with wifi. Tplink tl-wpa7617 kit. I am getting 36-40 mbps in my barn. Barn is about 100 feet from main panel in the house. Barn is fed by an 100amp breaker off house panel. Data rate is good enough for 4k viewing in my barn.

[@tomrunning357]

My metal building is about 300 feet from my cabin wifi source, and they share electrical power with a subpanel. Was there a distance limit mentioned with this equipment?

[@PeeksPeakHobbyHomestead]

I’m sorry, I don’t really know the answer to that. Mine is between 75-100 feet I think…

[@Toyotech91760]

I just added this setup for my home shop that is about 200 feet away from my house and worked no problem!!! THANKS!!

[@PeeksPeakHobbyHomestead]

Awesome!

[@tuckedinshirt]

Did you plug Ethernet cable in garage into WAN port on router?

[@joescheller6680]

Did you listen to the video.​@@tuckedinshirt

[@Pete..]

I started at a young age, wrenching on things the same way I love the junkyard, start out there, work your way into the garage then show your worth investing time into and you take it seriously and a good mechanic will teach you so much

[@jarod2818]

Fantastic video! Thank you for explaining the power coming from different meters. I have my barn on a separate meter. I was able to understand quickly that that wouldn't work for me! I bought ethernet cable and dug it in the ground to my barn and hooked to a new router. Great video!

[@brentnaegele7028]

I learned to wrench on stuff with my Dad on his various car and bike projects over the years. The idea of picking up junk to gather misc hardware is genius. Can't wait to give my kids stuff to tear into that i'm not worried about them destroying haha. Thanks for the info, you've gained a sub!

[@PeeksPeakHobbyHomestead]

Thanks for the kind words!

[@zacharyohare6029]

this is brilliant for home automation/monitoring. I have the same one service-> child panel setup with a metal building... don't feel like laying conduit and cable. This makes so much more sense. EVEN BETTER- I can finally put that baddy security camera on top of the light pole next to the coop! and watch chickens/control heaters/lights etc inside the coop. Sorta too cool. Love you got young ones wrenching. How I spend my years any chance I got- still do.

[@PeeksPeakHobbyHomestead]

Awesome! Thanks for the comment! Hope this works well for you. We have had good luck with ours.

[@roncrawford2416]

We are 135 miles away from our other home and keep an eye on it through wifi cameras. All it cost was the purchase of the camera system, and internet service. Nothing else in several years. Already paid for itself by stopping a burgulary.

[@trentherring5640]

Well. My shop has its own power meter. Didn't watch long.

[@joescheller6680]

Where is the meter getting its electrical source from.

[@tammyguthrie1190]

Thank you! My husband just built his garage a month ago, and I have been trying to find a way to get wifi in there for him for his birthday 8/9. Just in time, thanks again!

[@HillsideAcres]

I like it! I’d like to get internet to the shop someday, we have main barn, shop barn and house on seperate meter, I’m sure I can figure a way to get it to work for all 3

[@PeeksPeakHobbyHomestead]

I was excited to find a simple solution. It is handy to have KZbin on the TV out there! Good luck!

[@corkychetwyn9987]

Thank you for making the exact video I needed to see to solve my problem of poor wifi to my garage/studio! The equipment was less than $80 total (I have the TV already).

[@JustinsProject]

Hi Pete, I am working on finding a solution to my metal shop. Have you tested the speeds in your house vs in your shop? Do you think I could run a personal office off of the speeds that it delivers in a metal shop? I am really hoping that I could use this solution and scrap the Enthernet cable. Great vid 👌 👍🏻

[@PeeksPeakHobbyHomestead]

I did do a test one day and the speeds showed about half as fast in the metal building. It is still fast enough to stream video fine. I also know they have higher speed units for more money.

[@JustinsProject]

@@PeeksPeakHobbyHomestead Thank you sir! Appreciate it.

[@walkinharmonyhomestead2888]

Do you know if it’s possible to continue the chain on this (so to speak)? Like you, my husband wants wifi in our metal building shop (about 100’ from house, router/modem location), and I need wifi in our barn (about 300’) to monitor animals on Wyze cameras. I have no idea if you can extend the chain with a third box, and I assume that would require another router? Ugh. But if it worked, I would do it!

[@PeeksPeakHobbyHomestead]

I would think that you could, but yes, it would require another router. 👍

[@machdaddy6451]

I've used these powerline networking devices before too. They also have units that are access points (provide WiFi).

[@PineyGroveHomestead]

That's slick, Lucas! Maybe next year when you're down this way, you hook up the PG Mega-Shed!!

[@PeeksPeakHobbyHomestead]

Sounds like a plan! 👍

[@bryanfontaine9627]

I have 100amps (aluminum cable)ran from the house to the shop. Will the powerline network work over aluminum?

[@PeeksPeakHobbyHomestead]

Yes, that is how mine is setup.

[@blackjackfabrication4043]

Maybe the aluminum wire isn’t my problem.

[@TheLoner801]

Is your shop heated? If not how is your router holding up in the winters? From what I'm reading below freezing can adversely affect routers and my shop is only heated if I'm working in it.

[@PeeksPeakHobbyHomestead]

Great question! We only heat it while we are working and we had below zero (F) temps this winter and it still works. This was the first winter though.

[@COOIE74]

Great & informative Video, thanks 👍🏼 Did you have to do anything to the 2nd router like somehow connect it to your 1 in the house or was it just plug & play..?? Thanks in advance (anybody) 👍🏼

[@PeeksPeakHobbyHomestead]

Plug & play. It was all pretty seamless. 👍

[@COOIE74]

thanks again 👍🏼​@@PeeksPeakHobbyHomestead

[@COOIE74]

Sorry to bother you again 🤦🏼‍♂️ Does it matter which Port you plug into on the back of each Router..?? as in the 'WAN' or the 1, 2, 3 or 4 Ports..??

[@joeshue9087]

I had problems with wifi in my garage. I bought one of the AC outlet receiver kits. It works fine with an old router. I thank you for the advice on this Item. I'm glad you found this item our I would be without service. Again I thank you very much.

[@wheeliewonka4775]

Great video! Thanks for the help gonna try this in my garage! Also love seeing the young man wrenching on a motor! Keep it up pops!

[@defleppal]

I tried a powerline adapter and that didn’t work for my shop. Our well house is a secondary shop that it worked for for a short time but when it stopped I needed a new plan. For the garage shop that has metal carports that block the signal I ran cable for an access point device. For the well house shop I was able to use a mesh service. Those linked with my Starlink internets service has given me fantastic service all over the main part of our property 😊

[@coreyflaa2174]

Every thrift store usually has at least one router for under $10. I found five this week for $7 or less.

[@Prodigyproperties1]

the router you installed in the shop, if you connect to it on your phone is it the same network as the one in your main home? or do you have to disconnect from your main home wifi and connect to the shop one? asking because i want wifi in my shop but i want it to be the same network so when i walk out of my home it stays on one network once i enter my shop. im hoping your idea works for me

[@PeeksPeakHobbyHomestead]

That’s a great question. So it requires a separate wifi router inside your shop so it would be a different network. That being said, my phone loses the house wifi signal when I walk in the building and automatically connects to the shop so it works pretty seamlessly.

[@DroseMr]

Been wondering everyone else push bridging , and external antenna. I wonder if i can use this to get service wifi from starlink router to barn by plugging one into router and other in garage to starlink node?Think ill try it.🎉Thank You

[@Dark_Knight_USA]

Greetings: A cheap "surge protector" should B OK 2 plug in the cient unit. Most cheap"Surge protectors" and strips that do not disply notice of EFI / RFI protection should pass the RF signal 2 the client. The voltage surge components have nothing 2 do with EMI and RFI. I would not trust cheap "surge protector" strips. They R generally a 1 time use and not effective on many types of surges. Thx 4 the share.

[@egraadaangelthanks2773]

All Our Your Wething Our Time Are Comeing Up I Pray With You All By Thanking God For They Time On They Name Of Jesus On Prayer Amen

[@k.s.ktheboogeyman2788]

Bro, I've been trying to figure something out like this for months.

[@k.s.ktheboogeyman2788]

So just to make sure i just plug them in i dont need to set it up on a laptop at all?

[@hammar162]

Does anybody know if my home router only has LAN ports, will the powerline adapter work?

[@bubbleboy821]

Heads up: the speeds you get through powerline can be slower (but still useable) especially if your house is old. And you can sometimes use these on surge protectors, some surge protectors work with them, some don't. It's worth a try.

[@dustinb6249]

What great info. Thnx so much for the education. I was looking for a way to get internet to the outbuilding, internet Company wanted $500. Thanks again!!

[@barnabasranch5415]

I have the same exact problem, BUT, I have one electric meter that then splits off to two different main panels. I don’t think this system will work for me.

[@machdaddy6451]

I also used to take stuff apart when I was Kaden's age. Relatives would bring m3e thing to encourage me.

[@BandanazX]

Powerline is crap. Do it right and run fiber between buildings.

[@thomascook2771]

Damn Separate meter here. I’m OUT !!

[@richardschaffling9882]

Very good information and I put foil faced polystyrene insulation on the outside side of my old house and the interfered with my cell phone

[@berniesemark6271]

I purchased the Zyxel kit and it seems to be working, I just wish I could have got for what you said you paid. I'm in Canada and it cost me $115.00 but at this point I'll live with it

[@adventuresaimless]

Thanks for the info….ill be getting a very similar set up done in my shop as soon as I can afford to….

[@johnmcneil1681]

I have the same problem, except my metal building has solar power and not connected to the house at all

[@siyabonganxumalo4574]

Is the speed the same as in the main house?

[@PeeksPeakHobbyHomestead]

I believe there is some speed decrease for sure, but I am still able to stream video with no issues.

[@Bitcoincarpenter]

Great video question does it still work if my shop is on a separate service it’s only 30’ away from my house

[@PeeksPeakHobbyHomestead]

Thanks! If it is on a separate meter then this solution won’t work for you.

[@heathon218]

Great vid just ordered my own setup can't wait to get internet in the garage finally!!!

[@blackjackfabrication4043]

Didn’t work for me. I have only one meter but it still won’t connect.

[@michaeldoherty2289]

DId you haye to pair the new shop router behind the TV with the main router in the house?

[@teanseatim1253]

You should do a internet speed test! Id love to know what your clocking. Im about to inherit my grandpas old shop and she's due for for internet.

[@jamesglass3278]

I am in same situation, and this will be perfect.

[@leilajeffries9605]

And what do you do when your house is the metal building along with your shop

[@specialks1953]

It doesn't sound like you have a problem at all and if you do then connect it in the house like he said and connect in the shop like he said.

[@jamesdaniel947]

My remote garage has its own meter, so it doesn't share the house electricity.

[@PeeksPeakHobbyHomestead]

Yeah this won’t work for that…

[@orah12185]

Thanks. Just what I wanted to know. I’m my house is limestone brick and my studio is concrete shingles. Only enough signal gets through to make me want more.

[@phaedruscj3330]

Well shoot. I thought had finally found the solution to getting internet to our metal building. Unfortunately, our building is on a separate meter. Setting up a separate internet cable just for the building isn't financially feasible. Oh well.

[@PeeksPeakHobbyHomestead]

Yeah, I completely intended to run an Ethernet cable in the ground with my electrical and I got it all done and realized I forgot.

[@sherigitthens4330]

Did this setup interfere with any of your devices inside the house? Since I hooked this up to get internet in my garage, one of our iPads isn’t working on our internet. The iPad IP address and router IP address changed on that iPad. All other devices in the house work perfectly.

[@PeeksPeakHobbyHomestead]

I didn’t have any issues like that. Good luck.

[@SimsRacing]

This does not work, I have my shop on the same meter as the house just jumps off the main panel to a sub panel in the shop, Doesnt work in the shop works on every outlet of the main house. Shop is 133 feet away

[@PeeksPeakHobbyHomestead]

I wonder what is different…. I have been using mine for a couple months now and it is working great. I think I ran about 80ft of wire from my main panel to hook in my sub. Distance really shouldn’t matter. 🤷🏼‍♂️

[@SimsRacing]

@@PeeksPeakHobbyHomestead I bet it has to do with my panel being wired with GFI Breakers instead of regular breakers.

[@PeeksPeakHobbyHomestead]

@@SimsRacing ah man, I bet you’re right. I read that you can’t use a surge protector so that makes sense.

[@SimsRacing]

@@PeeksPeakHobbyHomestead Ya that didn't do it either. Switched out the GFI for a single pole 20 on one circuit and no dice.

[@SimsRacing]

@@PeeksPeakHobbyHomestead swapped out breakers still didn’t work so for now I have a extension chord ran out until I figure something else out

[@HighCountryRambler]

I have the same unit. *Did you have to configure the AC100 for the home router for internet access outbound?* I also purchased a Wavlink directional antenna that sits on top of this for higher power in one direction.

[@PeeksPeakHobbyHomestead]

I did not. Mine worked just plug and play.

[@yo_its_gingey5329]

NOW I CAN GET MY CHRISFIX

[@ktmxcracer]

So if my electricity is on one meter but I have separate panels for the house and shop then this will work? Im assuming yours is the same set up? Thanks

[@PeeksPeakHobbyHomestead]

Correct one meter two panels is what I have.

[@ktmxcracer]

Thanks! @@PeeksPeakHobbyHomestead

[@mhlib7569]

So, I want to be able to get wifi in the garage at my apartment complex but I doubt my apartment shares the same electricity as my garage, right? In this case, this approach wouldn't work, right?

[@PeeksPeakHobbyHomestead]

I am going to doubt it. I’m sorry I can’t say for sure.

[@canispankya]

The links to the powerline and router are not the specific devices you show in the video......

[@PeeksPeakHobbyHomestead]

I will check it, maybe they changed the Amazon products since I made the video…

[@canispankya]

@@PeeksPeakHobbyHomestead It happens. Just making sure everyone is on the same page. literally. I was gonna try an expensive option but now that I've seen your video I am gonna try it 1st. thankyou !

[@jaemez3247]

Thank you for this. I have this same problem. Installed a computer and TV but no internet. This will be perfect for my shop

[@justinramos4727]

Thank you Sir for this video. Just bought a new house with a pole barn. Wife’s business will operate out of it and our home wifi didn’t reach. Was going to do a mesh system but said let’s try this instead. Within 10 mins it’s up and running.

[@PeeksPeakHobbyHomestead]

That’s great! Glad it helped!

[@D70340]

Wow, what a fantastic idea Lucus! Unfortunately, our cable company charges you for every TV hooked up on your property. Our cable bill is already far to expensive, so this won`t be very wise for me to do in my garage. I do have a very powerful WiFi unit set up in the house. I get a great signal on my lap top in our metal garage, which is approximately 75ft away from the house. I suppose i could stream it to a big screen TV in the garage, but the cable company would find a way to cheat us for having it.

[@PeeksPeakHobbyHomestead]

I think part of my problem is my brick house blocks a lot of the signal too. That’s interesting that your cable company charges per TV. I’ve never heard of that. Thanks for stopping by!

[@bhall7997]

We dumped cable years ago. Using OTA antenna for CBS, ABC, FOX and NBC. Movies we have prime , roku, netflix , paramount + not counting Prime membership we are paying $20.00 a month for add ons.

[@monkfarm]

We have a remote rural location, and have starlink. We want wifi out in our studio/ workshop 200 ft from the house. Thanks for a straight forward video this helps.

[@rosspeplow]

You didn't need another router as you will now be double NATed, you just needed a Wi-Fi access point. It will work but you will probably run into issues getting devices to communicate or port forwarding in the future.

[@crazyworld1290]

Why won't he? Out in his metal garage he will to get to his phone an stuff right..? That's what I figure

[@Tyler344]

How far away is your garage from your house I have a house shed I don’t get a signal at all from my house and it’s not that close to the house but it’s using the same power line

[@PeeksPeakHobbyHomestead]

My garage is pretty close, but I’ve seen replies from folks having success as far away as 200’.

[@michaelmalone6858]

Great info, I have exactly the same issue with my shop, it is a 25 X 50 metal building. I have to keep the door open for any wifi at all. I wonder if you would be so kind as to post the name and model number to the extender you used? The link was to Powerline a subscription.

[@PeeksPeakHobbyHomestead]

Thanks for letting me know. I just updated the links.

[@mrs.c5471]

Oh, just realized you aren’t using Starlink. Will this set up work with starlink?

[@PeeksPeakHobbyHomestead]

I can’t say for certain, but I would think so…

[@lisawhite6058]

I have a question?… please help 🙏 I live in a rural area and have internet in our house with a powerful router and it reaches to our garage which is all metal ! One thing the garage is about 75’ away from the house so I was wondering if I should use this system you are using to get internet in it? They don’t want a tv in there just the Wi-Fi.

[@PeeksPeakHobbyHomestead]

If they are powered by the same electrical system then it would work. It does require a separate wifi router so my phone connects to the shop router while I am in there. Hope this helps!

[@Ridefastorgetpassed]

I so excited to find this video !!! I am going to copy your setup almost to a T. The links provided for the amazon items dont work they link to similar items but not the exact same ones you have. I just purchased these items I hope my set up works as well as yours. The only issue I have is I have starlink and I had to order the Ethernet adapter for it. I hope it all works out I am excited to get it all installed.

[@PeeksPeakHobbyHomestead]

Yes, they sold out of the exact models I used so I found the most comparable items I could to link. Hope it works well for you!

[@Huge475]

Having your son tear apart old equipment for spare bolts is a great way to get them into fixing things. Love the content!

[@petea1663]

Thanks for this, as you said this is exactly what I needed

[@halfstep67]

Can you access the shop from the house or house from the shop without having to change networks? Or do you have to reconnect to a different network when you go from shop to house or house to shop?

[@PeeksPeakHobbyHomestead]

You change networks, but for me, once I set it up on my phone it just changes on its own.

[@ward4251]

Is the router needed if the TV being placed in the shop is a SMART tv?

[@PeeksPeakHobbyHomestead]

If the smart tv has an Ethernet port then you could bypass the router. We wanted the router for our phones as well.

[@WhatTheEcho]

Try attaching an AirTAG to your remotes. That might help keep track of them.

[@PeeksPeakHobbyHomestead]

Right?! That’s not a bad idea!

[@scooby10168]

So do the router go to the tv for cable ?

[@PeeksPeakHobbyHomestead]

I use wifi to stream on the TV.

[@tuckedinshirt]

Sorry basic question. Do you connect the Ethernet cable to the WAN input of that router or just a regular Ethernet input?

[@PeeksPeakHobbyHomestead]

I believe it connects in the WAN input.

[@tuckedinshirt]

Thanks for the reply! Trying this setup myself

[@michaeldreves5072]

What kind of internet speeds are you getting from the Powerline set up in the garage

[@PeeksPeakHobbyHomestead]

I haven’t ran a speed test, but I regularly stream KZbin and never have any issues.

[@paulgarrison1141]

I wish I would have watched your video 3 days ago. I had not Wi-Fi in the metal building. I would have to walk outside just to get a call. Yesterday, I mounted my new flat screen. I bought one with basic functionality. I didn't want to spend too much because we had no Wi-Fi. I just hooked up a HD antenna. I did get a good picture on 35 channels. I also depend on having the computer in my shop. So, I bought a TP link Wi-Fi antenna, I also picked up a usb extension so I could run the antenna through a small hole in the side of the garage. The antenna works great. I mounted a small plastic box on the outside of the garage for my cell phone. No cell service in the metal building. I use a bluetooth speaker to answer my cell. Next weekend we will work on the stereo. I will be waiting for your next video. An outhouse fit for a king.....

[@PeeksPeakHobbyHomestead]

Sounds like you are getting things all set up! That’s a lot of fun! Thanks for commenting!

[@gtuttle4]

Great video! I have the same situation, I have a metal building that's approximately 200 feet from the house. How far is your garage from your house?

[@PeeksPeakHobbyHomestead]

Mine is close. Only about 100’ of wire, but I had someone comment that they used this setup on a building 200’ away and it worked for them. Good luck!

[@haydenmansfield200]

see i want to do this but im worried my shed might be on a different circuit to the house so will it work?

[@PeeksPeakHobbyHomestead]

It is my understanding that if they are fed by the same electrical panel, then it will work.

[@garciadonnovan]

The cleeter merch !!! 🔥🔥👍🇺🇸

[@jamesharless5357]

Very nice add on Lucas, great video, thanks!👍🏻

[@ryanwhite6914]

Will you also have wifi in the shop for other devices in your shop

[@PeeksPeakHobbyHomestead]

Yes, we connect our phones and tv to it mostly…

[@jontucker7292]

Man i loved this set-up, fir about 2 weeks rhen it stopped working, is your setup still running?

[@PeeksPeakHobbyHomestead]

I hate to hear that. Mine is still doing great. 🤷🏼‍♂️

[@jontucker7292]

@@PeeksPeakHobbyHomestead I'm guna return for the same item, maybe it's just a bad unit maybe, thanks for the response and take care.

[@eddierobles2137]

thank you so much for this video.

[@tracker1009]

Just brilliant, Thank you 👍

[@settjessettje9323]

Thank you!!! Exactly what I need.

[@borislum1998]

next time, take the TV's plastic protector layer last. you took it off firstand then laid the TV screen on your bench. hmmm BTW great video, entertaining and very informative. good job

[@mashbale]

Thx so much for this saved me so much headache

[@JohnStrandt]

Run an outdoor rated Ethernet cable to your garage. This is interesting, but silly.

[@PeeksPeakHobbyHomestead]

That was the plan, but we forgot to run it when we were pulling wire to the shop and now it would require digging and all. This is much much easier, just as cheap and so far is working just as well.

[@machdaddy6451]

Nice job! Turned out well.

[@johnbart8454]

I have a question ? The small black router , did you have to do any special set up on that ? I have my old Netgear & I haven't reset the unit so it still has the old password in it , do you think I have to reset it to the original password it came with ?? Help would be awesome & greatly appreciated thanks !!!

[@PeeksPeakHobbyHomestead]

I don’t know that I can say for sure. I had a new router I set up in the shop. I don’t know why that would be affected though. I would think the original setup and password should work.

[@johnbart8454]

So you didn't have to do any computer configurations , so you just plugged in power cord & Ethernet cord & turned on ?

[@PeeksPeakHobbyHomestead]

@@johnbart8454 I did not use a computer at all.

[@johnbart8454]

Ok awesome thanks for getting back super fast ! Really appreciate that very much !! Have a great day !!!

[@dwaynestroud5475]

What are your current speeds and what is the drop between locations?

[@PeeksPeakHobbyHomestead]

I think the drop is around half. I don’t have any trouble streaming video I. The shop which is really my only use for it.

[@YourpainRx]

Thanks for the help!!!!

[@bhall7997]

I figure I have KZbin diploma for all I learn :)

[@PeeksPeakHobbyHomestead]

Absolutely!

[@darrellvansell862]

If the Smart TV you used would have had a ethernet plug in. Would you still need the extra router or could you just plug into the TV.

[@PeeksPeakHobbyHomestead]

Great question! I believe I could have wired direct!

[@darrellvansell862]

@@PeeksPeakHobbyHomestead If you dont use extra router,Will the cell phone still work on wi fi..I clicked on the product and it said the ZYXEL Powerline Network is not available..I'm not sure what to buy now..Please advise

[@PeeksPeakHobbyHomestead]

@@darrellvansell862 I tried the links and all of the items are still available. If you need wifi inside you building for your cell phone then you would still need a router as well. That is why I went with these products.

[@darrellvansell862]

@@PeeksPeakHobbyHomestead ...Thanks I'll look again.

[@ahmadceelowskeaddy5384]

Great Video!!

[@delynnconlee6167]

Great video. Can you provide the product links? How far can the home be from the garage for this to still work?

[@PeeksPeakHobbyHomestead]

I put links in the description of the video. Distance doesn’t matter as long as they are served by the same electrical service…at least that’s how I understanding.

[@SimsRacing]

@@PeeksPeakHobbyHomestead Doesn't work for me at 133 feet

[@OrangeismyNewGreen]

Great idea and cool product Lucas. I used the same thing many years ago before we got high speed/fiber optics internet. 🙂🙋🏼‍♂️👍🏻

[@PeeksPeakHobbyHomestead]

Thanks, Luc! I was thrilled to find it!

[@patrickbass3118]

Would this product work with my fibre internet? My shed is about 500ft from the house

[@CRDODGE47]

Same question my shed is bout 500 foot away also will this work

[@shannonedmondson5802]

Great video, just a couple of questions. Does your garage run off of a subpanel? In the garage, did you plug the ethernet cable into the WAN or a LAN port on the router/modem? Did you set up the modem as an access point or just as a second SSID?

[@PeeksPeakHobbyHomestead]

My garage is a subpanel from the main house. As far as the internet, I don’t know much about the other stuff. I simply plugged the Ethernet cable into one of the ports on my existing router in the house and it worked.

[@tuckedinshirt]

In the router in the garage though which port is the Ethernet cable connected into? Thank you!

[@PeeksPeakHobbyHomestead]

@@tuckedinshirt it would connect into the WAN port in the garage.