NODE: Turn on stations manually

[@rkcos]

Moved into a home that had exact same unit for the front yard. I followed the instructions to turn on the station manually, and the display screen did nothing. Nada, zip, ain't happening.' So I bought an inexpensive lawn sprinkler. Simple, just screw onto the hose and turn on the water.

[@flyby9741]

I am about to do the same thing!

[@Hunter_Landscape_Irrigation]

Please contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request

[@seychelle85]

I follow these instructions exactly from this clip and the manual. My sprinkler System will not manually turn on any other station besides station one. Got any tips? thanks very much

[@Hunter_Landscape_Irrigation]

Thank you for contacting Hunter Technical Support. There could be a few reasons that one of the zones is not operating correctly. Please see some of these suggestions below: • Turn off main system water supply • Replace solenoid • Must use Hunter DC Latching Solenoid (P/N 458200) or other compatible DC latching solenoid. Locate a dealer here if necessary. Other compatible solenoids listed in this support section. • Wiring may be backwards. Black should always lead to the common terminal and red to the station terminal. • Turn water supply and preform manual test. Our support team can also help. Please email [e-mail] for additional assistance.

[@JOHNWAYNE1920]

what does the :05 mean. It will run for 5 minutes or will it run until you set it to off?

[@Hunter_Landscape_Irrigation]

The 1 0:05 indicates that zone 1 will run for 5 minute before turning off and moving to the next scheduled zone with a run time.

[@bogdangiurgiu3952]

Hi. For how long it will be on, on manual mode?

[@Hunter_Landscape_Irrigation]

Be aware when using manual mode, you'll need to shut if off yourself. It may be a better option to manually start an individual station so it shuts off at the programmed time.

[@integratyper1]

Hi there!!! I bought this and love it, but having an issue hopefully you can answer. Is it possible to manually turn on all stations at once???

[@aaronleboutillier]

integratyper1 same question here

[@JoseRivera-xo9ok]

integratyper1 no only one atation at the time

[@Hunter_Landscape_Irrigation]

Jose is correct, the NODE battery controller runs one station at a time.

[@tossacointoyourwitcherOriginal]

Doesnt work for NODE -400

[@Hunter_Landscape_Irrigation]

Take a look at the product guide here: www.hunterindustries.com/sites/default/files/OM_NODE_dom.pdf or contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request

[@deadthem]

can this controller and a low flow valve be rigged up to a rain barrel and work effectively or would there be pressure issues opening and closing the valve? of course with drip line and emitters in mind.