I "fixed" this cheap Chinese tool

[@piripiro]

The cross-contamination with IDAT scares me lots.

[@margaretcattertv]

Same! I was like wait a second I know that voice...*Ralphy voice* I'm scared

[@Blueshirt38]

They're about to change the channel name to Boy boy boy I think.

[@aaronvandegrift6478]

@@Blueshirt38Natural Process of Adaption

[@triplethtet6734]

💀

[@mad_6519]

​​@@Blueshirt38Creator like of confirmation

[@ShadowKylar]

Can confidently say I have no idea what’s going on for most of this, but it’s fascinating to see the complexity behind these machines and you’re a great story teller, so you’ve got me hooked

[@angrydragonslayer]

I get everything and i'm impressed by what can be done with so little. Didn't even know they sold TC spindles for that cheap

[@scottessery100]

@@angrydragonslayer i didnt understand a thing but loved the video

[@DonariaRegia]

@@scottessery100 I heard "grub screw" and I instantly knew he was talking about my ex. It really is a small world.

[@realcarguyrighthere]

did you come here from i did a thing?

[@ShadowKylar]

@@realcarguyrighthere nah, KZbin algorithm. Just recently found I did a thing as well

[@kritancreations6471]

AUSTRAILIANS HAVE GREAT SENSE OF HUMOR, THIS CHANNEL GONNA DO GREAT

[@NoEngineerHere]

GREETINGS FROM DOWN-UNDER, MATE

[@Laundry_Hamper]

@@NoEngineerHere SOMETHING SOMETHING VB SOMETHING SOMETHING

[@clonkex]

​@@Laundry_Hamper NAH MATE VB IS PISS XXXX ALL THE WAY (I don't drink idk what I'm talking about but we can get past that right)

[@willimnot]

This is really well done. I love the dark aesthetic. It compliments the depressing undertones that reflect the reality of every DIY project we chose to curse our own lives with.

[@TheLastTater]

This channel is going to be big! Keep it up. Love the content!

[@Larix_laricina763]

The boy boy cameo was awesome

[@ska042]

It's funny because boy boy is actually a tankie

[@NitroTom91]

Very refreshing to see someone on here being persistent with using their brain. There are a lot of people on youtube buying expensive stuff to ruin it. Doing the opposite is not only way harder (leaving the money aspect aside) but is also so much more satisfying to watch. And the humour you fabricate out of self-criticism is gold. Thank you!

[@saaaadud]

videos like this are few and far between, no small floating video in the corner of my screen while i continue to play a game. no phone. no idle face stuffing. house could be burning but only this has my attention and it flies by in a snap. thanks for the video ❤

[@derekmcdonald2168]

I really enjoy these videos! The humor, the accidental education, the fantastic music

[@phlosen7854]

I work in a Company that build SK and HSK Spindels and the Tool Holders here in Germany. The fact that you could get that runout into this specs is impressive. Seems like you are not forsaken and the Gods smiled upon your effort :)

[@somebodyelse6673]

Trickster gods...

[@Floerp]

Already can't wait for the next video and possibly some more crossovers with Alex and Alexa. Keep up the good work mate!

[@Hereforlols]

Can't properly express how simultaneously delightful and terrifying it is to see you, Alex and Alexa together....

[@Jackall37]

Don't take this as a criticism, but I would like to give you some tips for your griding setup. A spindle taper is not that difficult to grind, but never use feeds other than single axis. This adds up to the machine's errors and backlash, and very few CNC milling machines are precise enough to properly perform grinding to the precision required for BT30 using feeds in multiple axes. Typically, the attachment with its own feed is placed on the table, ensuring that it is perfectly parallel to the wall of the taper, but if you prefer to use the machine feed, you need to mount the spindle at an angle and the grinder vertically. You should move only Z-axis. Use a dye to check your progress and correct the angle if the top or bottom stops making a contact. Also make sure you're not pushing the grinder away, make empty feeds every few passes until the sparks disappear and the spindle is quiet, and then continue. As for the bearings in Chinese spindles, they are terrible. It's best to buy the first one you find from Japan/USA/Europe. If you have a lathe, you can easily make a better housing out of a piece of steel or at least aluminum. I feel like you know how to do it. Manual spindle scraping is only carried out on quills and mounting surfaces (sometimes on bearings in huge machines), I do not recommend it for DIY, it took me several years to learn it at a basic level, and here you need a master level 😉

[@MJPilote]

Actually most spinde repairs are done with driving two axis simultaneously. Real cnc machines are accurate and repeatable enough to manage the operation. Not the diy hobby machines but industrial ones, like Mori, Emco, Mazak, Okuma and many others. Making parts within couple of thousands of millimeters days on end, grinding a fresh taper is easy.

[@NoEngineerHere]

The first time around it did a fantastic job with interpolation, so I just stuck with it. I was tossing up a bunch of approaches before I jumped in, and your method definitely crossed my mind! I have a few thk linear motion units (combined bearing and ballscrew with a motor mount) kicking around, which I think I'll make use of when (if) I get around to regrinding this spindle. I think if I ever go to that trouble though, I'll pick up some beefier bearings, and probably make up a new housing. And the headstock needs work. So don't hold your breath for pt 2 any time soon 😁 I'm pretty deep into the lathe you would've seen in the video, which involves building a new spindle, saddle, tailstock, + maybe adding some CNC lite™ features. It never ends (thank goodness) 📈📈📈 And thank you for the info! I've always got a lot to learn.

[@satibel]

tbh you could probably throw some bar stock in your lathe, add a couple of skf bearings, and make a better block than you'd have trying to salvage this.

[@randomassortmentofthings]

@@MJPilote Fadals certainly aren't!

[@Boy_Boy]

这是一个伟大而光荣的视频

[@krolu]

I don't know how i missed your videos earlier. Fantastic job. First of all your cnc is beautiful. Secondly you videos are really well made. Finally third is the content which is exactly the style I like. So i couldn't resist and had to subscribe. Hope to see you shine here :)

[@DustyRobertson]

I did a things chaos, this old tonys sneaky video text and editing style. I love how you've pulled inspiration from other channels and created something of your own. Im so glad i subscribed in the early days of your channel!

[@NoEngineerHere]

No such thing as original content!

[@connorwolf202]

bro never worry about upload times I'm sure everyone would agree we'd rather have quality uploads that are fun and engaging for you and others than just trying to get a video out there

[@NoEngineerHere]

Your timing is perfect - writing the next one right now and it's not been easy! Haha

[@bagel-gyatt]

You came outta no where and made absolute banger content bro, I look forward to seeing more

[@rojirrim7298]

Dubious setups? Stressful long-sleeves in the machine shop? Unexpected Alexa??!! Damn, this channel keeps getting better! Edit: Of course you got IDAT in as well... The Aussie family expands!

[@3dstryo]

Oh man your videos are so funny. I'm a software developer and it's hilarious how much I feel your pain trying to get things right

[@robosilo]

I did a near identical process to my cheap bt30 spindle cartridge. I rigged up a high speed grinder vertically and had the spindle move up and down at the taper angle. I also had to manually grind down high spots to ease the process. It's probably more common than we think.

[@thomasmckeane4799]

Midnight upload, not an engineer but a fellow degenerate, thank you

[@yannismarle7797]

This guy is not making videos. He's taking us into great journeys, with highs and lows. He's distilling what make the essence of a maker. Pain, and sometime, Joy, at last.

[@charlieminers2892]

Good lord, there's hitting the ground running, then there's this channel. Did not expect the IDAT crossover lmao Awesome content mate, can't wait to see more!

[@temporaer]

Keep it up man, I really hope that you'll have a lot of success with this channel.

[@VikingRul3s]

The vibrations is caused by slack in X Two places it can be, the ballscrew (if you got those cheap ones, the balls are not made from proper steel and hardened properly, the screw itself is rolled and will last enough for hobby) or the guide/rails/tracks. Very good video!! It really shows the issues we face when buying cheap parts (am toolmaker, but also play with my own DIY for fun)

[@feew3454]

Guy from r/hobbycnc that asked for this spindle, been waiting for this video, now I know this spindle is garbage. Thank You.

[@NoEngineerHere]

Sorry it took me so long to answer hahaha!

[@theheadone]

That manual translation bit is some of the funniest shit I've watched in a long time, lmao. Great stuff man, I'm excited to see your future projects.

[@DeadOwlProductions]

Amazing! I laughed so hard and the cameo!! So excited to see what's next, but no pressure you take your time and figure out your balance

[@christopherj3367]

Just an idea, have you seen how mechanic's use a paste for grinding valves to get a clean fit "Valve Grinding Paste 100g" might be easier than doing the tapper by hand.

[@volentimeh]

This needs precision over multiple parts, not just between two paired parts.

[@somebodyelse6673]

@@volentimeh - Obviously, he needs two more cheap spindles to implement the 3 thingy method of metrology generation.

[@kenl4929]

The production of this video was perfect. The way you speak into the camera with your mannerisms, and the background music choice is dialed! Outtakes too!

[@noanyobiseniss7462]

Good choice of background music! I'm also impressed you actually gave credit in the summary.

[@802Garage]

37K subs and only on your third video! Phenomenal success and well deserved. I had your first vid saved for later to watch and didn't realize this was the same channel. Gotta go back and watch the other two.

[@NoEngineerHere]

Thankyou thankyou! Still can't really believe it.

[@802Garage]

@@NoEngineerHere Clearly you're on to a fantastic formula. I always tell people to show a lot in a single video and keep it simple. I need to follow my own advice. Have you ever worked on another channel?

[@NoEngineerHere]

First time if you can believe it! But I have watched a whoooole lot of good KZbin.

[@802Garage]

@@NoEngineerHere Truly amazing! You definitely deserve the views. You have put in a ton of work here. I've been at this for years and I need to get on your level. Hopefully my next big series will be. ;)

[@ceidways]

I have to complement your voice-overs. Though you are - idk what the word is, unprofessional, nervous sounding? - you are confidently so. During my own short burst of youtube inspiration, I didn't even have the balls to finish editing when I sounded so shit. This is a testament to your inability to feel public humiliation: the most important skill for an aspiring content creator.

[@matthewpeterson3329]

These are great videos, so please keep them coming. Not sure if others mentioned this but, as for that taper, the nice thing about them is that you don't really need the entire taper to make contact. I have seen Morse taper tools spin, causing galling inside that a taper ream couldn't fix, so most folks will just run a boring bar up in there and remove a clean and consistent groove where the galling was. As long as you still have concentricity and an adequate amount of contact, you will be just fine. Thanks for the great content!!!

[@h2atus]

As someone who is just now going to a trade college for machining, I love that I can understand most of what you're talking about! Love the content and I can't wait to see more!

[@tinayoga8844]

This is why I bought a proper lathe and milling machine many years ago. Hopefully they will be a help when I start on my DIY cnc router.

[@jimsvideos7201]

I have one of those 7" mini lathes, and with upgraded bearings the headstock is remarkably good for what you pay for them. It's MT3 with a flange, but that is easy enough to get rid of.

[@orad3093]

The Boyboy cameo was quite thee surprise, loving the content, keep it up

[@AndySomogyi]

That’s awesome ! I have a cheap Chinese tool & cutter grinder that I bought used , and I spent probably 60 hours in hand-scraping the table flat, all the ways straight, rail beds flat, and adding an system . After all that effort, it’s straight, but still a terrible grinder . But hey, it’s the only thing small enough to fit in my shop.

[@maciekurbanski]

Your comedic timing is impeccable. ...while being very good engineer (with all the related OCDs that all the good ones have)

[@eddietowers5595]

I like your moxy, kid. You don’t give up. You don’t the heaviest things weigh you down. Makes for a great artificer. I have a traditional home machine shop, which I call my $150.00 machine shop because I have six lathe I’ve accumulated over the years, 5 of which I paid $150, each, at the time and the last one I paid $350 for because it’s what’s called a 3 in one lathe milling machine. Though each had its set of problems, for the price I paid for them, all. It paid out in the end as precision machines after little work done.I now have a precision home workshop. If I could do it in a similar way you’re doing it, I know you could do it in a similar way I did. Keep up the good work, makes for a fine channel with great content.

[@NeverNotExhausted]

Buy a metal throat tube for your Kingroon 3D printer... The hotend has a design issue where it has a PTFE tube in the tip of the throat tube that melts way below the point that PTFE should. It also has a cavity at the top that filament likes to use as storage space and that causes jams. I was very near buying a whole new toolhead for my KP3s before I found out that the throat tube was the issue

[@daniellockwood4342]

Oof I had the exact same ringing/resonance when cutting in the Y-direction on my vmc build just like you had cutting that arc. Ended up discovering that I had a few thou backlash in my X-axis. The BK ball screw block I had used deep groove bearings without preload and allowed quite a bit of axial play - swapped these out with angular contact + shim washer and has been cutting like butter since.

[@NoEngineerHere]

Yeah I think it's a combination of a bunch of things. That endmill was well used as well. Have since been playing around with some brand new roughing endmills and it's playing a lot nicer!

[@steelcannibal]

Came here for some sweet sounds... was not disappointed 😊 keep it up man!

[@alanbrown4446]

Youve got amazing patience and tenacity. I'd have just binned it. Great movie.

[@lourias]

A very cute video! Thank you for keeping the background music at a proper level so that I could hear your voice as you spoke.

[@maartenstraver3737]

Lovely, just what the doctor ordered, another fun and educational masterpiece, thanks mate ❤

[@dannapert4199]

Great video. Envious of your machine for sure. As for the arc pauses, try setting G64 at the beginning of your G code. It’s constant velocity mode and will smooth out arc movements, should be a way to set tolerances on the smoothing as well

[@NoEngineerHere]

Thanks for the tip! Will give it a try

[@dubi127]

7:25 , now i know why i found you in the first place, ALL HAIL THE ALGORYTHM!!!

[@amyshaw893]

1:02 I enjoy how the subtitles say something completely different to what you're actually saying

[@kb-elmo]

I love the subtle humor in these videos :D Also was that a small hint to a "I did a thing" collab at the end there?

[@NoEngineerHere]

I hope so

[@snjert8406]

I've watched all of your videos in one go and I love them. Welcome to the hell of my subscription feed

[@LordyHun]

This is sort-of how I imagine my forays into owning a workshop will be, if I ever get to fulfilling my age-long dream of actually getting started at one...

[@NoEngineerHere]

It's not something that happens overnight, so you should start now.

[@renfreedom8444]

我也想，可惜中国大多数人没有独栋房和车库

[@Vandelay666]

Came here from I Did a thing. Interesting videos, hope to see more soon

[@markfaulks5014]

Loving the smoothest of jazz

[@satormus8263]

the text editing on this video is beautiful

[@JZL003]

You're flatmates with boy_boy - that's amazing! Also manually 'lapping' the taper with a die grinder is hilarious

[@miles11we]

I always love finding people who will go into projects like me "this is stupid, this is wasting money and a ton of time but i kinda want to see if i can figure out how to make this turd shine"

[@oafkad]

This is incredible. Australia is just the place for great YT channels.

[@bobfugazy4916]

New subscriber! You look like my nephew and you you have the same crazy sense of humor. The you the most important quality of a good machinist, KZbinr, bonsai artist (whatever) and that's persistence. Keep up the good work, thanks and Happy New Year.

[@InheritanceMachining]

Some turds can be polished 😉 Looking forward to that IDAT collab.

[@huntereakright8988]

fancy seeing u here

[@NoEngineerHere]

I wanted this as the title so badly

[@claytonm2238]

I have that exact same lathe you teased at the end! I am looking forward to seeing what you do with it so I can improve mine.

[@NoEngineerHere]

If you've got any info on it I appreciate it! Haven't managed to even figure out the model haha

[@claytonm2238]

@@NoEngineerHere Sorry for the long wait. I didn't get a notification when you left the comment. I will be sending you an email with all of the information I was able to find. Far too much to type out here. Love the videos, keep up the good work.

[@hamsLP]

Are we gonna get a lathe build video in the future? Also thank you for muting the cutting sounds with sped up video!

[@_droid]

For translating manuals you know you can just scan the whole thing in to a PDF and then feed it to one of the online translators. Or feed each image manually as needed.

[@NoEngineerHere]

I could do that, but then Aleksa would never progress in his character arc

[@TipZ_TV]

I have found it much easier to just feed my translator once a day. then ask them to translate something for me. They don’t complain about being hungry as much.

[@TheVersatileMindMedia]

Excellent, good scarscam with a lot of noble tries, and still keep your sanity, your CNC will never look the same again. Well, for today anyways! Awesome channel, keep it up!

[@actionman862]

Regarding the fretting and taper contact, I would use some fine valve grinding paste to lap the parts together.

[@Doug-Didgiridoo]

I enjoy your development of the story. Well done, good measure.

[@Chauzuvoy]

You, not an engineer: "I'll manually grind out the spindle and sacrifice a bit of contact with the tool holder in order to reduce the spinout" Me, a (network) engineer: "Ah, yes. One of the crossbeams got out of skew on the treadle, impeding the appropriate encabulation matrix. I understand machine things." In other words , I have only the vaguest knowledge of what you're doing and these videos have still been fun to watch and easy to follow. A+ good stuff!

[@NoEngineerHere]

Let me put my comment in terms you might understand: Beep Boop - access granted to creator approval

[@edeasley144]

0:27 Yes but she was really hot and I was fairly drunk.

[@newt2010]

Love your videos. Keep it up. You know, messing things up and repairing them and repairing them and messing them up but finally getting it in the end. Cheers.

[@khuongathebounga4141]

I’m here from “I did a thing”. Great work on that video mate. Looking forward to watching your vids too.

[@HeathLedgersChemist]

It breaks my heart to hear an Australian pronounce Zed as Zee.

[@Charles_Mcgee]

I love to see you've mixed in with boy boy and ididathing

[@uselessDM]

Getting This Old Tony vibes, very nice.

[@deanfalvs8516]

I admit, I’ve watched this video twice now and still laugh at the deadpan humour. Given the soundtrack and narrative I could have been watching a film noir detective story (Maltese Falcon) instead of an engineering video. Beautifully put together and perfectly cut.

[@Kosciejj]

thanks to you im connecting with my mechanic brother, by sending him your videos and talking about this stuff

[@joshuahuman1]

Pretty cool one thing you could try is using a boring bar to turn the spindle in place.

[@jessebob325]

I liked your cable management. it looks tidy. 👍😉 I found your channel via Inheritance Machining channel.

[@timzalusky]

"Ever done something you knew you'd regret" hahahaha and yes, almost always it's buying something from China 🤣

[@manxman8008]

you could turn most of the middle from the taper, as clearance of 1/4 mm, so there is less to get correct, and more likely a good seat. Should also lap after grinding.

[@AntoninoParino]

Good stuff dude, came here from How To Basic’s slightly less intelligent cousin who built that Diana killing Beyblade. Keep it up

[@LeaveMasonAlone]

The surprise Aleksa lmao I noticed Mao first and looked over and my brain rebooted

[@秋少-o7i]

This spindle is a product of a small workshop with no guarantee of quality. I never thought of buying it.

[@joewboe]

you may not be an engineer but your a master rigger

[@Robair6624]

Petition to make a film out of this amazing story.

[@olke85]

Yeah! New awesome video, and Aleksa. And Alex. Sweet.

[@DokiHiai]

Wonderful humor in this. Good work problem solving, can definitely relate to the pain of having to figure this shit out.

[@nder12345]

Probably will never read this. But if your in Sydney I'm happy to help with the lathe refurb. Got the gear and some idea. 😂 keen for more videos love the production

[@th3engineer]

I loved your dry humor and subscribed, thank you for the entertainment.

[@quintinsmits]

I once bought a drill chuck with a MT4 taper on the back in the far east, for use on my manual mill. Only useful to stir coffee with the 0.3mm runout...

[@NoEngineerHere]

The spindle actually came with a bag of instant, I wondered what it was for!

[@ganeshakalburgi2003]

Not an engineer, Sounds like something an engineer would say . Great video 🎉😂

[@redstonebrain40]

I love that there's like 4 Aussie boys who get together do crime, make crafts and film KZbin ❤

[@jackfirst2651]

I would recommend you check and adjust the bearing endplay(and may e sideplay too) on both your lathe and your mill spindle.

[@donavinnezar]

in the end you were doing your friend a favour in learning his chinese as translating would be good practice

[@whynotanyting]

The whole way I was thinking "this could have just been returned, this could have just been returned..."

[@BrilliantDesignOnline]

Returning something to chi-neh will cost one hundred times more than the original cost plus the free shipping; better to go for the flower pot modification.

[@BrilliantDesignOnline]

7:20 I was entirely unaware that Chairman Mao was conversate about VFD programming...

[@anon-means-anon]

Watching someone else slog through something solely due to stubbornness makes me feel like it's ok that I do that too, so I subscribed.

[@PleakeCrions]

Dude this guy is like Australian This Old Tony that knows both parts of BoyBoy. Definitely gonna keep checking him out

[@dynamixsystems]

I'm not an engineer either! and, I watched all your videos. Awesome job bro! 🤟