BIM - Revit 3D Organic Form 03 Tensile Structure

[@_kriship_]

Thanks man for this tutorial!

[@NonStopLearning101]

Happy to help!

[@1051704]

Шикардос!

[@NonStopLearning101]

Thanks for watching

[@siddharths8143]

Amazing, helpful when used simultaneously with the software and with excessive use of pause/play button :D

[@NonStopLearning101]

thankz for watching

[@hameedbusari6685]

Bro, I am very grateful for this tutorial. Thank you so much

[@NonStopLearning101]

Glad you liked it

[@favourope-bc6mq]

If the glass is under, you could just adjust the offset in the 'edit type' dialogue box to the negative of the value inputted initially ♡

[@o0olamiso0o]

I CANNOT THANK YOU ENOUGH I SWEAR!

[@healthexpert9374]

were you able to make this?

[@o0olamiso0o]

yes i was !

[@NonStopLearning101]

Thankz for watching Hadeel Kareem!

[@anwardahjer1382]

When I try this, the panels always move and there are empty spaces, only if I put the mass straight they are well accommodated. What can I do to fix this error? and to be able to put the panels in a more dynamic mass

[@valentina-il1dw]

gracias x tanto perdón x tan poco >-

[@NonStopLearning101]

Thank you for watching!

[@InterArchi]

slower and always interesting ! thanks a lot dude !

[@NonStopLearning101]

Thankz for watching InterArchi...

[@ulya7194]

You are just perfect! How clear and helpful video... Thank you sooo much

[@NonStopLearning101]

Glad you liked it

[@ArCrisCruz]

Awesome.. Thanks for sharing.

[@NonStopLearning101]

Glad you liked it

[@kka333]

Wtf! Awesome! 😭😭😭

[@NonStopLearning101]

Thanks for watching

[@camilanatalymaldonadosaave5224]

Buenas tardes, me aparece bloqueado el icono de ref plane, como puedo ejecturar un nuevo plano de referencia o volver a activarlo

[@serdarikbalpolat5289]

Amazing tutorial thank you so much! But i have an issue. My glass plane is under the steel family. The glass is supposed to be on top but it is under the other family. How do i fix it? :(

[@NonStopLearning101]

Thank you! Glad you liked it. You need to creat separate object for the glass and add material as glass

[@hosnidalos1057]

When I insert the Customized frame to the mass, its distorted,

[@NonStopLearning101]

double check the adaptive point,

[@sk12n]

Amazing tutorial. Is there a way I can change material of truss system to Bamboo?

[@NonStopLearning101]

Yes you can, but will adapt only the color or texture of the bamboo, however the organic shape of a bamboo will not be there

[@taisaffonsohaas1763]

Thank you, helped me a lot!!!

[@NonStopLearning101]

Thanks for watching Tais, appreciated your feedback!

[@ThePatriarchXCI91]

I tried to follow your steps, however the family doesn't bend with organic forms, any idea how I can fix that?

[@celsoflader1121]

Hi @Non-stop Learning101, great job with the material, powerfull things to learn, but one advice, if you intent to teach, may be you have to be more slowdown whith de video, is dificoult to learn in that way, but if you intent just to show us your skills okay, you have been doing a great job, we all love your work skills!

[@NonStopLearning101]

Thankz for watching celso Flader,,...Appreciated your advice. However, I'm just doing these on my freetime... You need to watch the previous videos for basic in order to catch up.... this video is for advanced....

[@thenm13king]

commencing second year architecture, and im self learning revit, after a lynda tutorial, and watching another slow tutorial vid right before this. id say even though i understood a bit whats going on. it helped me, but i wouldnt recommend slower, probably a voice over would do the trick. good luck and thanks

[@o0olamiso0o]

It is possible to slow down any youtube video from the settings on the bottom right .. choose numbers below 1 for a slower motion video. 0.5 or 0.75 are perfect!

[@yinanmiao2164]

Hey I was able to create the form but none of the constraint points show up....anyone can help? much appreciated?

[@NonStopLearning101]

Thanks for watching Miao... before modeling you have to check and flex your reference plane if it's working. then start modeling and press the lock to constraint in your reference plane. I hope I did a little help.. good luck

[@Sajani1995]

How do I flex the reference planes?

[@kelvinwong2341]

You follow every single step of the video then you will find the answer

[@MrArchi20]

great tutorial but for some reason my panel did not align to the grid and it looks like it overlaps and rotate and spreads out towards the end of the final shape... please assist.

[@healthexpert9374]

I have the same problem. did you find the solution? please share,

[@boby9660]

I have the same problem too

[@NonStopLearning101]

Hi Kyle you have to check or uncheck the extruding option in the Properties, thanks for watching!

[@injyayman1899]

i didn't find the extruding option in the properties of the frame , where can i find it please ??? thanks in advance .

[@salvatoresanfilippo7851]

Hi, thanks for this great tutorial! But i don't get the same result and i don't find the extruding option. where is it?

[@AshishSingh-on1qg]

I created the same model but the roof panel did not fit perfectly, anybody has a solution for that

[@NonStopLearning101]

request to re do it again and ensure the correct reference plane has been set, good luck

[@yasminfarhana3138]

Hi, can u help me, how to select all reference line after u click the modified button?

[@yasminfarhana3138]

at 58 seconds of video, i dont know how to select all reference line, pls help me :(

[@NonStopLearning101]

You can hold the ctrl button to select multiple objects

[@alimohammad7733]

please can you help me. I can't find the family named "Metric Generic Model Pattern Based" as it is in the video

[@NonStopLearning101]

Thanks for watching ali.... these are templates. you have to install them on your system if you did not connect to the internet when you installed the Revit software

[@naomizuniga8654]

in what units do you have ?

[@NonStopLearning101]

Hi, millimeter. Thank you for watching

[@FlozFelipe]

I have a question, this model the lines of the axes of the lattice are in the analytical model? for calculation

[@NonStopLearning101]

thankz for watching... not in particular

[@haroldogarcia4296]

Very Good!!!

[@NonStopLearning101]

Thankz for watching Haroldo...;)

[@puscasu2007]

Hey I was able to do the form but when i go to changing the material to glass just like you did for the panel of the frame it doesn't change even though in the settings it states clearly glass, its opaque. Can you help me why is that happening?

[@NonStopLearning101]

thankz for watching, try to go back the family and from there create material

[@armandolopez-tn4fp]

very nice but the diagonal web members should go to the nodes not to the middle points of the upper chords...

[@NonStopLearning101]

glad you liked it

[@rickmcgillivray6154]

When placing the panels it comes up with, "Can't make type "Rectangle : family structural component". and the panels don't fit on all the divided surfaces, why is this?

[@NonStopLearning101]

thankz for watching, double check your curtainwall family

[@z.hshafiqurrehman1]

@@NonStopLearning101 how cheak this

[@aunsahmed2077]

thanks for the tutorial... i had a problem with the frame tho, it won't be placed on the surface properly T-T

[@lichnerestudio2715]

That happened to me aswell, could you solve the problem?

[@NonStopLearning101]

double check the points you are creating, it maybe not matching

[@asifadil7439]

can u show design forces

[@NonStopLearning101]

hi, what do you mean?

[@Faitory10]

شكرا

[@NonStopLearning101]

Thanks for watching

[@aina2959]

hi, can i used timber to make this kinda roof?

[@NonStopLearning101]

yes you can use timber as material if available. Thanks for watching

[@busraablak523]

I LOVED THANKS A LOT BUT WISH YOU spoke in a vıdeo

[@NonStopLearning101]

Glad you liked it

[@z.hshafiqurrehman1]

Truss not fiting smoothly on component mass

[@NonStopLearning101]

Truss shall be lock with the reference point to work

First I want to say thank u, cause I learned more in your videos than I've learned In some courses I've made. And second I want to know that if its possible for you to help me modelling a little different type of coverage, and if its possible, how can I contact you? Email, skype, whatsapp something?! And I need to say you definitely got a Brazilian fan! haha

[@NonStopLearning101]

Thanks for watching Antonio, you can give me your email address here or you can check mine on my profile

[@KasunGayashan_2012]

Thanks for sharing.. How can we make this frame analytical? for structural design

[@NonStopLearning101]

Thankz for watching. analytical?

[@cadeosysengineeringservice8469]

Very useful

[@NonStopLearning101]

thank you for watching Suraj..;)

[@jeanettelee4551]

diao do so fast for what? rushing for reincarnation?

[@NonStopLearning101]

Thanks for watching diao...;)

[@asiarudwan5955]

PLEASE CAN U HELP ME THE RESULT IS NOT THE SAME AS U .. ITS NOT FIT TO THE ORGANIC SHAPE

[@alexandrchoi8359]

Same

[@gabrielmauriciocondori3532]

like!

[@NonStopLearning101]

Thank you

[@chingkaiwen2877]

hi there, i was able to create the form but when i come to the frame. The size of frame is as same as the pattern but it doesnt go as shown in the video. The structural frame seem fine but the glass didnt join together (didnt follow the pattern position). May I ask how to solve this? tq~~ btw great video!!!! :D

[@NonStopLearning101]

Thankz for watching. double check your extrusion on glass. maybe its not attached to the grid line

[@SuperDuperWTFteam]

Hey man did you find a solution for this, have the same problem thanks!

[@shreerangbhagat]

why cant you guys make tutorials with voiceover

[@NonStopLearning101]

when there's time

[@ahmedfadel5978]

thanks

[@NonStopLearning101]

Thankz for watching

[@IgorGeek123]

can you make the family available for download pls?

[@NonStopLearning101]

yes sure

[@beydacasas]

@@NonStopLearning101 WHERE IS THE FAMILY?

[@toquangthang]

great

[@NonStopLearning101]

Thankz for watching

[@Faitory10]

جميل

[@NonStopLearning101]

Thanks for watching

[@BlueOriginAire]

Why doesn’t music from my phone library sound this good ???

[@NonStopLearning101]

Thankz for watching William

[@mustafizrahman252]

Good video...Please make it a bit slower and with voice instructions otherwise difficult to follow and waste of time and energy....

[@NonStopLearning101]

Next time. Thanks for watching

[@hilarylory531]

Merciii

[@NonStopLearning101]

Thankz for watching!

[@TheKKnB]

this is amazing... would be better if a bit slower tho... :)

[@NonStopLearning101]

Thankz for watching,,,,;)

[@iggy4413]

Hey man I tried this but mine looks.. off? Is there anyway I contact you so I can show you my output? P.S. Great tutorial :D I'm just.. off. Thanks!

[@NonStopLearning101]

thanks for watching Iggy...;)

[@mustafizrahman252]

Complicated!

[@NonStopLearning101]

Thanks for watching

[@chanex2991]

why don't you talk? its not so useful that way :/

[@chanex2991]

in my case it works, but on organic form roof the pattarns get messed

[@NonStopLearning101]

next time when there is time. Thanks for watching

[@NonStopLearning101]

don't be excited on the form, sometimes it's not working with complicated form. You need to create through third party software like Rhino